Export settings for media or Encore DVD burning settings

Similar Questions

• S good for Satellite 1400-253 DVD burner need

  Could someone give me the part number for the Toshiba dvd writer/burner
  or offer any compatible dvd burner to fit one

  Computer portable satellite 1400-253 s (ide connection)

  Thank you

  Satellite 1400 is old model of laptop and it comes with several different optical disk drives, but none of them was DVD burner. Currently, these discs were not available.
  Due to this fact, you will not be able to find info on compatibility.

  If you need the list of compatible readers let us know but none of them is DVD burner.

• For Satellite Pro 2100 DVD burner?

  I have a Satellite Pro 2100 which has a CD-RW/DVD-ROM drive and I would like to upgrade to a DVD burner but don't want an external. Could someone tell me which drive is compatible with the model number and where I can get hold of one? Can I get a Toshiba direct? Nowhere would really suit me I need to get one, but just don't know what I can and can not use! Thank you.

  Hi Jamie

  Unfortunately, he was unable for me to find this DVD burner, but if you want to update or change some parts of your laptop the best way is to ask ASP for compatible devices and supported.

  Good bye

• HPE-500Y LightScribe DVD Burne: help looking for replacement for HPE-500Y LightScribe DVD burner

  DVD writer internal LightScribe locked up.
  I tried to find replacement and continue to use LightScribe when I transfer VHS to DVD.
  Help

  Hello

  You can get a optical drive 5.25 "HP Lightscribe on Amazon.  The same page lists the others not to HP 5.25 "optical drives.

• My windows media player does not recognize that I have a cd/dvd burner installed how do I corredt this?

  I'm trying to burn pictures on a dvd with windows media center and I get a message saying "install a burner and try again. I have a burner and have used it in the past so I don't know what the problem

  Hello

  1. have you made changes on the computer before this problem?
  2. which version of the Windows operating system is installed on your computer?
  3. what version of Windows media center do you currently use?
  4. are you able to use the DVD writer normally with other applications?

  Try the following and see if it helps.

  Method 1:

  Make sure that the CD/DVD burner is properly connected to the computer.
  a. If you are using an external CD/DVD recorder, connect the CD/DVD burner to the computer.
  b. plug in the cabin of the power supply and check if the power light is on.
  c. install the burning software. Insert the CD, a program will pop up and you guide through the installation process. Usually it let you name your drive, tell you when connect you your external CD/DVD burner to your computer via USB, and update the software for your external CD/DVD burner.
  d. check if you are able to burn CD/DVDs.

  Method 2:

  Delete the temporary folder burn Cache and check if it helps.

  Follow the steps below:
  (a) click Start, select computer.
  (b) now go to sub lease:

  File Burn \AppData\Local\Microsoft\Windows\Burn\Temporary C:\Users\ (Username)

  (c) delete the files at the location above.
  (d) restart your computer and check if that helps.

  Method 3:

  Uninstall any third-party CD/DVD burning software installed on your computer and then burn the DVD and check if that helps.
  How to uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Method 4:

  Run the fixit for the following Microsoft fixit and if that helps.
  Your CD or DVD drive cannot read or write media: http://support.microsoft.com/mats/cd_dvd_drive_problems/

  Method 5:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Center-frequently-asked-questions

• Media Player does not burn the audio (wav) files on the disk, or play "" CD error ".

  Media Player was working fine until recently. Now when I hit the button "Start burn" the burn starts momentarily, the time of the audio files is displayed, but when I insert the CD in the drive, it reads 'CD error' and there is no sound. I recently installed a new security package (Webroot) but none of my other software has been affected. Tab of computability, I noticed that it is set to windows 95 (I have windows 7), but the program does not allow me to change it. I checked for driver updates, but the computer says that all drivers are current and the device works correctly. any help would be appreciated. Thank you.

  Hi Mike,.

  I suggest you to change the settings while burning the files using Windows Media player.

  Check out the link to do so:

  http://Windows.Microsoft.com/en-us/Windows/Media-Player-CD-DVD-burning-settings#1TC=Windows-7

  For troubleshooting further, you can also follow the link suggestions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Player-error-while-burning-CD-help/24026285-bebd-4b2d-beb2-77ff50b88030?page=1

  Please let us know if the problem still persists.

• Help with CD/DVD burning software

  Original title: help a dummy?

  What is the most simple and free cd/dvd/burner (image) to use Dummies like me? ...:)

  Hello

  Visit the link below to learn more about the CD/DVD burner in Windows:

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a CD or DVD in Windows Media Player: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Burn a DVD-video disc

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  You can also use your favorite search engine to search for the available CD/DVD burning software.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• LG supermulti dvd burner is not detected by the system.

  I wanted to install ATI RADEON HD 4350 and so I uninstalled the driver Intel (r) GMA. I installed the card on the motherboard and I have installed the driver provided by the manufacturer using their CD and I also did other necessary things. Everything worked perfectly. Then in the driver user interface, I saw two monitors. I selected one of them, without any judgement and turns off the computer. Later, when I put it on I saw there was not on my screen and indicator showed natural signal, which was red. So I uninstalled the card and connect the monitor to the onboard connector cable.

  Sometimes the HDD and LG supermulti dvd burner got detected (both or one of them) and sometimes they were not. When they were done detected the speed and performance of the machine was very poor. Monitor has also not getting detected in Device Manager.Then I managed to uninstall the video adapter driver and is also further things to slove the problem:

  Checking the SATA connections (my HDD is on the SATA1 and LG supermulti dvd burner is SATA 2), checking the other connections, Clearing RTC RAM etc, but nothing gave me a permanent solution.

  Then I did a BIOS update and I did an upgrade to Windows XP SP3, stay inside Windows and I also reinstalled driver Intel (r) GMA (new version).

  Now the problem is the drive is detected but supermulti LG dvd writer is not. But now the monitor is in my device manager and performance is good. Now what should I do to the system so that it could detect LG supermulti dvd burner?

  Two other points are:

  1. when I was using the video card my system was attacked by a Trojan horse, but now it's OK after running a full scan using KIS2011 and take necessary measures.

  2 is powered for the LG supermulti dvd burner because it is to open when I am pressing the button.

  System Specs:

  OS: Win XP SP3 x 32

  MB:Asus P5QPL-AM (it has integrated video card)

  The problem has been resolved by running a scan for hardware changes in Device Manager. I did it before but this time it worked.

• I installed plusv15 of real players and the dvd burner does not work. It freezes and told him to put in a disc.

  I bought plusv15 real player and it has been installed. for some reason any dvd burner does not work. A pop up comes up saying wrong disc record and replace it with a new drive. I did it three times. Real player support me staff referred to you. Windows dvd burner does not work.

  Hello

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I would also ask you to contact the manufacturer of your computer to check the updates of the firmware of your CD/DVD drive.

  It will be useful.

• Is there a plugin for Windows Media Player DVD burner?

  y at - it a plugin for windows media player dvd burner

  I would like to burn movies downloaded onto a dvd instead of a cd

  More details... Please.

  You have a DVD - RW? If you have only one
  CD - RW, there is no way to burn DVDs.

• Media player does not recognize my cd/dvd burner

  I use Media Player 11.0 on XP SP3.  The tab device recognizes my cd/dvd burner, but when I select the Recorder tab, it says: connect a burner and restart the player.  Any ideas why the burner tab does not recognize the burner?

  Mike. T.

  Hi Mike,.

  (1) don't you make changes to the Windows Media Player settings prior to this problem?
  2) are able to burn CD/DVD with your CD/DVD-ROM?

  Follow the steps in the link here and check for the issue.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Write to us if you are still experiencing a problem. We will help you.

• Windows media player won't recognize that my cd/dvd burner, so will not burn anything even if during 3 years, until now

  Windows Vista operated computer that has worked well so far, now Winsows Media Player does not recognize my burner. Tried to do the upadting for my burner,

  but said that everything is up to date, can someone help me?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows Media Player skips CD burning for 100% immediately without burning the disc

  Original title: burning music

  Windows media player won't burn on CD - R. It will start and run at 4% complete then go to 100% immediately, but nothing was burned. CD / dvd rom driver is up to date. what I'm doing. I am at a loss.

  Hi jhb1205,

  1. have you any Microsoft burning of CD/DVD software installed on the computer?

  We recommend that you reduce the burn speed and check the result. To do this, try the following steps:
  a. open Windows Media Player.
  b. click on organize, click Options.
  c. click on the tab burn and change the speed of burning in the middle.
  d. click ok to apply the changes.
  e. restart the Windows Media Player and try to burn the disc.

  See Change settings for burning a CD or DVD in Windows Media Player

  For your reference:
  1. see burn a CD or DVD in Windows Media Player
  2. see burn a CD or DVD in Windows Media Player: frequently asked questions

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Media Center - DVD burning problems

  my media library began to say that error when you try to burn a dvd of a tv show, that I taped. The program is a unrestricted type and I've been able to burn these programs on dvd. My windows updates are up to date. I'd appreciate any help

  Hi David,

  Thank you for using Microsoft answers.

  I will need some additional information to help you best.

  O what is the exact error message you get?

  Ø do you have any third-party burning software installed on your computer?

  O are able to read these files in Windows media center?

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Let us try to disable antivirus and check if it works.

  Reactivate the antivirus after checking the issue.
   
  Let us try to disable the third-party firewall and check if it works.
  Re-enable the firewall after checking the issue.

  Method 2:

  Uninstall the third-party software if any burning and see if the problem is resolved.

  Method 3:

  You can try to restore your computer to a previous state and see if the problem is resolved.

  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. In the System Restore dialog box, click Next.
  4. In the list of restore points, click a restore point created at least a week before the current date, and then click Next.

     Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.

  5. Click Finish.
  6. The computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Method 4:

  Try to install the update from the link below.

  June 2008 Cumulative Update for Media Center for Windows Vista

  http://support.Microsoft.com/kb/950126

  Check whether the problem is resolved.

  Method 5:

  See the following topic in the link below.

  What is protection against copying and how does this affect me?

  This management recorded TV in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

  See the link below for more information on burning CD/DVD with media center.

  Burn a CD or DVD in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Just don't get made for DVD burning

  With the help of first elemtns 12.  I have the video to MP4 I burn to DVD.  No affeect made the MP4?  Rendering seems to create a new MP2? file that I do not understand if the rendered MP2 file is used for burning to disc.  Not worried about burning for lack of time the most beautiful video.  Thank you

  ABB654

  A video file has audio and video compression with a file extension that

  represents the format that wraps the compression. Your "MP4" could refer to the video compression or the

  file extension. It makes a difference. And, no matter what resolution, export settings will define the export.

  Suppose the AVCHD (MP4 AVC/h.264) video compression and that the file extension is .mp4. Let us again

  Assume the properties of this file tell us that the size of the image is 1920 x 1080 @ 29.97 progressive frames per second.

  If you burn this chronology widescreen DVD-VIDEO on a DVD disc in Premiere Elements, the final product on this disc will

  to be widescreen DVD-VIDEO on DVD (720 x 480 @ 29.97 images per second interlaced). Video files, DVD-VIDEO

  structure are MPEG2. VOB. These are the DVD-VIDEO format standards, without changing them.

  Your alternative is to burn this Assembly on a DVD with the help of publish + share/disc/AVCHD, then your DVD could have the AVCHD format

  on DVD (1920 x 1080 @ 29.97 images per second interlaced). The AVCHD format video files are AVCHD.m2ts.

  AVCHD on DVD cannot be read on the track of the Player DVD TV mill. whereas the DVD-VIDEO to DVD disc.

  This is an overview.

  RTA