Export the Wavs (high level question)

Similar Questions

• Where is the a high level button in the Explorer of Windows 7?

  Dear all,

  If I open an application (MYOB accounting software) from a shortcut on my desktop it opens into the backup folder (probably because that's where I left the program). How do you go up a level to find the MYOB file in the folder that contains? Where is the a high level button in the Explorer of Windows 7? If it was deleted, then why? That was the spark that has decided to make life difficult for us? I thought that Microsoft were supposed to make life easier for us, not more difficult.
  Thanks to all who can help you with this.

  Hello

  The up button directory has been removed in Windows 7 to preserve the appearance of the new command bar.

  Here are some workarounds.

  In the address bar, click the next top-level folder.

  Press the keys Alt + up arrow.

  The up button directory has been re-instated in Windows 8.

  Concerning

• Sending a big boost with the SDK high-level examples of results in a timeout

  Hello

  I try to send a big boost with the sample of high level. I have registered my valuation Service Push Blackberry application, deployed the SDK in Tomcat on my computer, my app has added to the list of high level sample applications and tried to send a little help with a message in plain text during broadcast (to the Subscriber of "push_all").

  This resulted in an IOException caused by a timeout: "taken IOException sending message to the address URL of PPG: https://cp3520.pushapi.eval.blackberry.com/mss/PD_pushRequest.

  I have a few test:

  1. I send a simple GET request in Forefox on https://cp3520.pushapi.eval.blackberry.com/mss/PD_pushRequest which resulted in 401, so I can reach this address.

  2 I tried to reproduce the request with a Firefox plugin. Here are the contents of my application:

  Headers:

  Permission: myBase64encodedcredentials

  limit: QfgeRDy0bk3pYpCMeL8Q

  multipart/related

  Content:

  -QfgeRDy0bk3pYpCMeL8Q
  Content-Type: application/xml; Charset = UTF-8

  
  http://www.openmobilealliance.org/tech/DTD/pap_2.1.DTD">
  
  
  

  
  
  
  
  -QfgeRDy0bk3pYpCMeL8Q
  Content-Type: text/plain; Charset = UTF-8
  Push-Message-ID: bgsCVVfx6AD-1361888782229

  test
  -QfgeRDy0bk3pYpCMeL8Q-

  This resulted in a timeout.

  3 I tried the same query without the "multipart/related" header, and got this response:

  
  http://www.openmobilealliance.org/tech/DTD/pap_2.1.DTD">

  So I guess that it is not an authentication problem.

  Do you know what could prevent the response to be sent?

  Hello

  I finally solved the problem!

  In fact when I tried to reproduce the request I made a mistake in the headers, I put two different instead of ' Content-Type: multipart/related; Boundary = QfgeRDy0bk3pYpCMeL8Q; type = application/xml '. I tried with the firefox plugin again and get the same response as Matt told me in his private message, when tested with my credentials:

  
  http://www.openmobilealliance.org/tech/DTD/pap_2.1.dtd">http://cp3520.pushapi.eval.blackberry.com/mss/PD_pushRequest" sender-name="RIM Push-Data Service" reply-time="2013-02-27T10:48:40Z">
  

  For the serevr part I think it was because of a proxy problem, you said. I could not download the installer of linux SDK on the Blackberry site, I installed the Windows SDK on my Windows computer, and I think that Java options were not used by the server (which is strange because I put it in the Tomcat service Java options). I copied the folder of the SDK on my Linux computer, added the Java options in catalina.sh and everything worked well with the sample of high level. So I guess that the problem comes from my Java Windows Setup.

  The tricky thing, I don't really understand is the timeout for the request with bad headers.

  Now, I need to know why the app is not subscribed to the service push, but it is another problem.

  Thank you all!

  Julien

• How to see the/say high level group/directory

  So I have a script with the help of this forum to change styles, but the only problem I have still is I don't know how to say or show the top level of a style (so not in a group).

  Here's the code below, basically I just need to know what to put in instead of groupold/group when the style that I want to use is not in a folder/group. Thanks in advance.

  replaceStyle("Old", "H1", "new", "ActiviyH1");
  replaceStyle ("Old", "H2", "new","ActiviyH2")
  
  
  function replaceStyle(GroupOld , find, GroupNew, replace){
      try{
  var myDoc = app.activeDocument;
  importedStyle = myDoc.paragraphStyleGroups.item(GroupOld).paragraphStyles.item(find);
  ApplyStyle = myDoc.paragraphStyleGroups.item(GroupNew).paragraphStyles.item(replac e);
  importedStyle.remove(ApplyStyle);
      }
  catch(e){
      //alert (e)
      }
  }
  
  

  Hello

  Change a function:

  function replaceStyle(GroupOld , find, GroupNew, replace){
      try{
  var myDoc = app.activeDocument,
  importedStyle = myDoc.paragraphStyles.item(find),
  ApplyStyle = myDoc.paragraphStyles.item(replace);
  
  if (GroupOld) importedStyle = myDoc.paragraphStyleGroups.item(GroupOld).paragraphStyles.item(find) ;
  if (GroupNew) ApplyStyle = myDoc.paragraphStyleGroups.item(GroupNew).paragraphStyles.item(replace) ;
  
  importedStyle.remove(ApplyStyle);
      }
  catch(e){
      //alert (e)
      }
  }
  

  You can call it as:

  replaceStyle ("", find "", replace) or

  replaceStyle (0, find, 0, replace) or

  replaceStyle (undefined, find, undefined, replace)

  for higher level styles

  Jarek

• Impossible to decode and import the wav/mp3 file selected"error in Captivate 4

  Good afternoon.

  I exported and modified a Captivate presentation audio in Soundbooth. After editing, I save the file as a. WAV. When I import the file to the slide, I receive the error message listed above.

  I followed the other discussions in the forum and performed the following:

  XP Pro (32 bit - SP3)

  E-Learning Suite

  Captivate 4

  Soundbooth CS4

  • Downloaded and installed new NSAudio.dll
  • NSAudio.dll successfully registered
  • Ran successfully the restoreCP4regentries.bat and the restoreRegPermCP4.bat
  • Restarted the computer
  • Ran the program as long as administrator (even if he asked me to re - register the product - a little strange)

  I always get the error when I try to import WAV files. If I convert the files to MP3 format, they can be imported. At the moment I prefer not to import them in MP3 format.

  WAV format is uncompressed, 44, 32 floating little (I also tried other bits).

  I lost a whole afternoon of productivity to this.

  Any thoughts on how to solve this problem? It seems that I followed all the recommendations I've seen so far.

  Hello

  Captivate seems a bit picky about WAV format. You might have to adjust a few settings with the WAV output. You could start by trying the following and see if it is resolved.

  Start with a backup copy of the audio clip

  Open base Windows Sound Recorder

  Open the WAV file with questions in sound recorder

  Click file > save as

  Click the change... button - make no changes, and click OK (this should change it to PCM format)

  Try to import the WAV file after that and see what happens.

  Personally, I would use the MP3 myself. Not sure why you are against it. After all, this is what will end up in your compiled result.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training

  SorcerStone blog

  Captivate eBooks

• Basic question XML Publisher: how to access the tags in the higher levels?

  Hi all
  We have a fundamental question in the XML editor.
  
  We have an xml hierarchy as below:
  
  < CD_CATALOG >
  <>CATALOG
  CATALOG < CAT_NAME > 1 < / CAT_NAME >
  < CD >
  Heading1 < TITLE > < /title >
  ARTIST1 < ARTIST > < / ARTIST >
  < CD >
  < CD >
  Title2 < TITLE > < /title >
  ARTIST2 < ARTIST > < / ARTIST >
  < CD >
  < / CATALOGUE >
  <>CATALOG
  CATALOG < CAT_NAME > 2 < / CAT_NAME >
  < CD >
  Title 3 < TITLE > < /title >
  ARTIST3 < ARTIST > < / ARTIST >
  < CD >
  < CD >
  TITLE4 < TITLE > < /title >
  ARTIST4 < ARTIST > < / ARTIST >
  < CD >
  < / CATALOGUE >
  < / CD_CATALOG >
  
  We need to create a report as below:
  Catalog_name CD_TITLE CD_ARTIST CATALOG 1 HEADING1 ARTIST1
  CATALOG 1 TITLE2 ARTIST2
  CATALOGUE 2 TITLE 3 ARTIST3
  CATALOGUE TITLE4 2 ARTIST4
  
  So we have a loop at the < CD > Help for each CD. But when we are inside this loop, we cannot access the CAT_NAME value which is at a higher level.
  How can we solve this?
  
  Now, we use the workaround of set_variable and get_Variable. We are defining the value of CAT_NAME inside an outer loop and use it inside the loop internal using get_variable.
  Is the right way to do it, or are there better ways to do this? We run into problems when data within tables.

  You can use

  copy to your model

• cancel the export of the signal at high level

  Hello

  I try to send a short pulse from a meter out to one of the three PFI consecutively. The lines are supposed to be 'high', when I change from one to the other PFI.

  When I export the signal, the road will remain active, which is not what I need from the pulse will be then output to more than one line.

  I tried almost everything I knew, including research forum, but all I find are to know how to cancel the export by setting the PFI in three States. It is not enough that he let the line logically low.

  All attempts to take over the line by a for example a digital camera output high fail on me.

  Can someone help me?

  Thank you

  Michael

  Hello

  So here's the solution I ended up with. Not very pretty, so if someone has suggestions for improvement, I'll be happy to learn.

  Hello

• I need to stop a download of the query, I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not who have, or want to buy.

  I need to stop a download of the query, that I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not have that, or I want to buy it.

  Motion IS a stand-alone application. It is mainly designed to make effects for Final Cut Pro X, but it is not necessary to have with FCPX nor is it necessary to have FCPX to create projects for other purposes. When you open the query, simply select project of work outside the FCPX motion. You can save regular projects of Motion anywhere on your system.

• Export the graph to image: a few questions

  A few questions.

  (1) what does export average image "simplified"?

  (2) the invoke node export the Image export the image or simplified?

  (3) export the image to a .eps file, what I get is a picture of real vector graphic?

  Thank you

  (1) simplified - essentially data plots in graphical format, - without control shadows, white background, solid black grid lines. Try to copy it to the Clipboard, paste into paint, you'll see.

  (2) export Image - simplified (only for graphics). Get the picture - picture of the graph (any control)

  (3) generally labview does not know the vector graphic images, and maybe that this exception, since it is simplified to the rowset.

• How can I set the default volume for the sound level of the wave in Windows XP

  When I start or restart my computer running Windows XP Professional, the wave volume goes up to the max level.  This happens even if I set the volume to a level very low.  The volume control shows 'SoundMAX Digital Audio' at the bottom.

  I guess I could figure out how to do; However, it seems that it would be disabling applications and not answering is not to reason the volume resets to max level on boot-up the top.

• Where are the best sites for high-level and how information to do different things in Oracle?

  
  Hello

  Where are the best sites for high-level and how information about various things in Oracle?

  Some examples of things:

  * spa

  * spm

  * db replay

  * Resource Manager

  I need a place high-level

  and also a place of step by step.

  For example, I look at these sites:

  www.Oracle-base.com

  www.psoug.org

  Thank you Roger

  Part of the problem is not so much finding sites that have articles on Oracle, that is to find reliable websites with this information.  When I search my site of certification for resources, I find a significant number of people who have 'technical' Articles on Oracle. However, many of these blog posts have simply no useful information.  It is not even that they are wrong so far as article does not include anything that is not declared more clearly and in detail in the documentation.

  That said, a site you have not mentioned above is the Oracle Learning Library.  There very often an excellent material that is very closely linked to the themes of the certification:

  https://apexapps.Oracle.com/pls/Apex/f?p=44785:1:0

• Get the parts with very high level in a tree by using Connect by

  I have the following table:

  CREATE TABLE (Z_BOM2)has VARCHAR2(4 CHAR), B VARCHAR2(4 CHAR));

  Insert into Z_BOM2 (A, B) values ('A', 'B');

  Insert into Z_BOM2 (A, B) values ('A', 'C');

  Insert into Z_BOM2 (A, B) values ('C' ' d ' ");

  Insert into Z_BOM2 (A, B) values ('C', 'F');

  Insert into Z_BOM2 (A, B) values (', 'E');

  COMMIT;

  SELECT * FROM Z_BOM2;

  A	B
  A	C
  C	D
  C	F
  D	E

  A is basically a Parent and B is a child.

  I would like to input not valid 'E' and 'F' in a query and get only the parents of high-level both those who should be 'A' for both of them. Here's the query I use:

  Select SYS_CONNECT_BY_PATH (, "/") as a path, a, CONNECT_BY_ISLEAF AS worksheet b, level, CONNECT_BY_ROOT b top_level

  of Z_BOM2

  connect by prior a = b

  Start with b IN ('E', 'F');

  
  Which returns the following:

  / D	D	E	1	0	E
  / D/C	C	D	2	0	E
  / C/D/A.	A	C	3	1	E
  / C	C	F	1	0	F
  / C/A	A	C	2	1	F

  Why it not return the appropriate top-level parent?

  This isn't my request.

  It is:

  select cbr the_parent, a the_child_you_started_with
  from (select a, b, level, connect_by_isleaf cbil, connect_by_root b cbr
  from z_bom2
  connect by prior a = b
  start with b in ('D'))
  where cbil = 1
  

  She returns B and has

• How can I contact the high-level support and have an interactive discussion with the SAME person?

  I tried to get a fix for a problem with my account and her affair with an old email address I want dissociated with my account.  I sent a very detailed and clear request to the service the customer and I get the same, I mean exactly, Word for Word response, which is not at all what I wonder.  In addition, I get these email responses and tells me that I can not reply to this message; I wonder to start a conversation.  Believe or not, when I started a conversation and pasted my explanation and asked that the representative has read my message, that person got sent back the same word-for-Word pre-formatted message.  At that time, I wrote a very detailed re-explanation of with the letters "BOLD" and everything, and the guy or the girl still he sends me a sentence canned.  In addition, it is called cat, but it takes 2 person 5 minutes to respond; they read very slowly or watch TV or something.  During the whole cat 30 min, this representative managed to never sending me a message that he or she actually typed. but the entire cat with all pre-formatted responses.  Are these real people or some sort of software experience HAVE?

  If this community of users is not monitored by Adobe personnel, then I know that this message cannot go anywhere that will help me.  But if anyone has a secret formula to get around the wall built the auto-bots on the front line and get to higher level support, I would appreciate a tip.

  Thank you

  Hello

  I sent you a message. Can you please check and answer?

  -Usman

• Can I copy or cut a file of muse a high level of the page master form to another?

  Can I copy or cut a file of muse a high level of the page master form to another?

  Hi Graham,

  You can copy the contents and paste them into another file of Muse however copy and paste pages are not supported currently.

  Kind regards

  Akshay

• Export the file to print to ultra-high resolution settings: 5000 dpi, 1x1cm

  I have a series of files for each with an artboard of 1024 x 1024, with different patterns on each of them.

  I need to export it to print at ultra-high resolution (5000 dpi, with a size of about 1 cm x 1 cm) to be used with a particular kind of new technology of micro-optique.

  How to export the vector images to display properly for printing to a specific Department and a specific size?

  rutipo,

  The relationship between the size of the image in pixels, the resolution of the image in DPI (pixels per inch) and the size of the actual image in inches, is as follows:

  Actual size pixel = PPP x.

  If you have 5000 PPI at a size of 1 cm or 1/2.54 inches, you need a pixel size of the 5000 * 1/2.54, or just 5000/2.54 = 1968.504 and something (in this cae, she is not a whole number.

  Up to 2000 x 2000 pixels will be sufficient.

  It is worth noting that for some uses, as png for web use, the final pixel x pixel size must exactly match the size of deired.