Exporting files for mastering HD, what could be better?

Similar Questions

• CS4: Disorder export file for Corel DVD Moviefactory

  I just finished a project in Adobe Premiere CS4... I had been exporting in format Microsoft AVI NTSC widescreen (the project is in 16:9) and had burned the DVD with Windows DVD maker, which came out pretty good, but now I need to create a DVD with set chapter marks (which you can't do with DVD creation).  I ran into several problems trying to export in Moviefactory...

  (1) Microsoft's AVI files are not formatted to fullscreen.  There are bars on the sides even if it is a file of 16:9 and the project is 16:9.  I suspect it's a question that I have to go to a forum of Corel for, but I thought I would ask here too...

  (2) if export to MPEG-2 DVD format, it puts the video correctly, but the file itself contains no audio data, no matter what audio I export... There is no audio on the file itself so the problem is there before I bring it to Corel.

  First far THAT MPEG-2 was the only file can export Moviefactory that formats the video properly, but I can't seem to export with the sound... not sure that it is.

  To make a single MULTIPLEX file, you must select that in the output... options option you use is designed to create the file (s) to recall, what works better with separate video & MPEG Audio files

• Export files for use in Adobe Muse OAM

  I'm a 3D Designer and you want to make an OAM-file so I can put it in Adobe Muse.

  I try to import all the 500 png in Adobe animate CC and save it as a file OAM, but quality is still poor.

  How can I set up publication for OAM that the quality is good.

  Thank you.

  

  Export files of CC OAM animate to Dreamweaver and Adobe Muse | Adobe Dreamweaver CC tutorials

  [moved to Adobe Creative cloud to Adobe animate CC - general]

• XP pro sp3 run asr, but didn't start; files for the recovery diskette could not be created

  I had previously asr has been successfully run on the same configuration but have decided to update the recovery data. I tried to restart the asr by clicking Start, all programs, accessories, system, backup tools. The Backup Wizard appears and I clicked on Advanced Mode. Then followed the backup utility page, I clicked on the ASR Wizard. The next page has been the preparation of Recovery Wizard, I clicked next and was presented with the option of backup destination and, after finishing the backup destination, I clicked Next. My page was last option; End of the ASR Wizard, I clicked Finish. Backup went into his usual preamble but almost instantly a warning box came up with the message "files for the recovery diskette can not be created." I am running xp pro sp3 as I had been for the creation of the previously successful GDR.

  I also tried using the Backup Wizard and I clicked on backup all information on this computer (this option automatically provides ASR) and followed the instructions of the wizard through to the end and the failure has been the same.

  I found a solution to my problem of ASR. If I was not able to create an asr backup, I was still able to run Ntbackup. I've saved my OS drive then ran repair with the XP Professional installation cd. Backup ASR works now.

  OK, I had to reinstall all them that updates the Knowledge Base Microsoft and also all the Service Packs. One or two of the plug-and-play applications were a bit annoying, but be as I have all the installation cd, other than being tedious, have all been re-installed and the system is now as good as new.

• When I hit start to search fall on computer files any files not listed. What could be the problem?

  No files don't show at all. When I type in a file and hit search it will not search for files. He worked in a couple of weeks. I even restored your system to an earlier date, but still nothing.

  Hello IJAllen,

  When you checked to see if the Windows Search service was running, was it?    Please visit the link below and let us know the status.

  Search for Windows 7 - does not return the content of the files - suite

  http://social.technet.Microsoft.com/forums/en/w7itproui/thread/ecbecc00-f3e7-429f-87cd-8900fc313add

• I get the message "files for the recovery diskette could not be created" when you use the backup utility. Why?

  I was using the Backup Wizard, backup all info on the computer to an external hard drive and insert a diskette in the drive.

  Hello

  · What is the edition of windows that you have installed?

  · What is the service pack installed?

  Try the steps listed in the link below: year Error Message is displayed when you try to use the Automated System Recovery Wizard: http://support.microsoft.com/kb/302700

• What could be better? A large or 3 small rooms?

  Hello community. Please help me with my two questions.

  I have 3 parts in my project and I think it would be better to separate them into 3 files. It will give me the opportunity to make some changes in a part, without making on another. Another idea is for MBP is not heavy.

  But having the project in a single window fix gives me the opportunity to do the same Volume, mix better in the same way and so on... If I could do a real gap between them in organizing the window like a 3 parts completely separated, would be better, I think.

  How do the experts?

  The seecond one:

  Due to some changes I'v made, all the instruments and percussion but notes of percussion sounds are not seen in a partition. I ' v ever seen this sort of behavior before. Any idea, please!

  Thanks in advance.

  Of course - keep projects organized into folders is a very effective way to manage them. You can collapse, develop them, play without exploding the folding, etc..  I think it is a good idea and the workflow for you to try.  Plus you can make copies and if one messes up you could have backup files or even nested.  A lot of options.

  Go there - problem solved!

  You want to ensure that you choose the personal style of drum in the score for drums and personal style allows you to place the groups of notes on the designated lines. Looks like the notes you want to place just to be adjusted in the personal style to make them visible.

• Frames are obsolete? What could be better?

  I like using frames, but saw someone say that they are outdated. Why? Is there something that accomplishes the same thing in the form of frames and is as easy to use?

  If the frame is just taking the navigation and you have a blog with a few static pages and I see some useless executives here have a scrolling side while the other does not move.  If you don't have hosting already, I suggest you a hosted WordPress ( http://wordpress.com/ ) solution, or if you have installed Wordpress on your own server, PHP/mySQL ( http://wordpress.org/ - or some hosts have an installer in their hosting package).  The count is minimal, based on your current layout, and you would have maybe 5 pages total.  Personally, this is the direction I would take.

• "I get,' files for the recovery diskette can not be created ' and I can't save my PC

  When I try to back up my PC, I get "files for the recovery diskette could not be created" how to fix this?

  Hello

  This problem can occur because ASR is not supported in Windows XP Home Edition. However, users of Windows XP Home Edition can access the Recovery Wizard if they install the Ntbackup program in the Windows XP Home Edition CD-ROM Valueadd folder.

  See the steps listed in the article below and check
  An Error Message appears when you try to use the Automated System Recovery Wizard
  http://support.Microsoft.com/kb/302700

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Clear the error on windows server 2008. All of the above files are locked.  We maintain active directory on and it is also not working.

  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

  I hope this helps.

• How can we export itno csv data file for oracle forms

  Hello

  How can we export itno csv data file for oracle forms

  For example. I have the block called A.what never the data displayed on a block, when I click on a button, displays the block data, must be exported to the csv file.

  My application is running on the unix operating system.

  Please help on this.

  First of all.  What is your version of forms (for example: 11.1.2.2.0 not 11g).  Finally, who will use the .csv file?  If it is a user on their client computer - CLIENT_TEXT_IO TEXT_IO or WebUtil are standard packages used to export data to a file of Oracle Forms.

  The amount of data to be exported?  If you export only a couple hundred lines - export of Froms will be OK.  If you export more lines than that (300 + lines) then the export will be extremely slow to your username.  Keep in mind that forms is not designed to perform data exports - there are better tools available for this...

  Craig...

• What could be the reasons for overlays of Folio no do not build a scrolling region?

  What could be the reasons for overlays of Folio no not to build a scroll on a box group of texts-photos-paintings, places (in the usual way for a slider) in a container?

  Now, I found a way to do it. Save the Illustrator .eps files (curves/text converted to curves or not) in an old format (CS4) .ai files and paste illustrations in containers and adding them to the group the problem go away. The scroll box works now, but I really don't like this solution. So, I would appreciate a guru to explain this point. Thank you!

• How to import of existing. FLA files for versions previous of FLASH in the latest version of FLASH and then export to a FILE that is HTML5 and visible on IPAD?

  How to import of existing. FLA files for versions previous of FLASH in the latest version of FLASH and then export to a FILE that is HTML5 and visible on IPAD?

  Previous version of Flash & Dreamweaver (Macromedia 8)
  Current version of Flash & Dreamweaver (Adobe Flash Professional CC & CC professional Dreamweaver)

  Previously, you must create a FLA SWF export and then put in a layer in DREAMWEAVER

  However the SWF does not work on IPAD, IPHONE etc...

  so, what is the process to convert previous FLA files?

  or create new files in Dreamweaver? I mean that it must be the correct standard OPPS of today?

  Flash professional help | Create and publish a HTML5 Canvas document

• my Photoshop Elements that always visible while in program files is no longer available, nor has any size, what could happen?

  I used my elements of photo shop just a day ago and now it is no longer available.  It is not a trial version, so what could happen and how do I get another without paying a fortune?

  Photo of Photoshop Elements, you can download the installation files for Photoshop Elements 9 retail to products download Photoshop Elements: 7, 8 and 9.

• Question: How do I assign a TOKEN for the class, field, method in the export file?

  Hi all
  
  Please take a look at this photo: http://www.flickr.com/photos/25615172@N08/5788551711
  
  I have a question for you:
  
  1 / in the export file, what allocation rule of tokens for the classes, fields, methods?
  
  2 / how, the articulation between * #token_c2.token_f2* and public-> field3 protected class3 ?
  
  3 / how the articulation between * #token_c2.token_m2* and public-> protected method3 class3 ?
  
  Thank you
  HoaND

  I am interested in this topic as well and looking for the answer elsewhere. Let me know if you have the answer