I get the message "files for the recovery diskette could not be created" when you use the backup utility. Why?

Similar Questions

• XP pro sp3 run asr, but didn't start; files for the recovery diskette could not be created

  I had previously asr has been successfully run on the same configuration but have decided to update the recovery data. I tried to restart the asr by clicking Start, all programs, accessories, system, backup tools. The Backup Wizard appears and I clicked on Advanced Mode. Then followed the backup utility page, I clicked on the ASR Wizard. The next page has been the preparation of Recovery Wizard, I clicked next and was presented with the option of backup destination and, after finishing the backup destination, I clicked Next. My page was last option; End of the ASR Wizard, I clicked Finish. Backup went into his usual preamble but almost instantly a warning box came up with the message "files for the recovery diskette can not be created." I am running xp pro sp3 as I had been for the creation of the previously successful GDR.

  I also tried using the Backup Wizard and I clicked on backup all information on this computer (this option automatically provides ASR) and followed the instructions of the wizard through to the end and the failure has been the same.

  I found a solution to my problem of ASR. If I was not able to create an asr backup, I was still able to run Ntbackup. I've saved my OS drive then ran repair with the XP Professional installation cd. Backup ASR works now.

  OK, I had to reinstall all them that updates the Knowledge Base Microsoft and also all the Service Packs. One or two of the plug-and-play applications were a bit annoying, but be as I have all the installation cd, other than being tedious, have all been re-installed and the system is now as good as new.

• XP Home Edition. Click on "Finish" to complete the backup or Restore Wizard and get the error message "file of the recovery diskette could not be created. The operation has been aborted. "Impossible to correct the error. Any Suggestions?

  Follow the instructions in MS, but is unable to perform a backup.

  Hello

  You can follow this link and check if the problem persists.

  An Error Message appears when you try to use the Automated System Recovery Wizard

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "I get,' files for the recovery diskette can not be created ' and I can't save my PC

  When I try to back up my PC, I get "files for the recovery diskette could not be created" how to fix this?

  Hello

  This problem can occur because ASR is not supported in Windows XP Home Edition. However, users of Windows XP Home Edition can access the Recovery Wizard if they install the Ntbackup program in the Windows XP Home Edition CD-ROM Valueadd folder.

  See the steps listed in the article below and check
  An Error Message appears when you try to use the Automated System Recovery Wizard
  http://support.Microsoft.com/kb/302700

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on

  I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on.  What should I do?

  Hello

  · You have a third-party security software installed on the computer?

  · What is the error message that you receive the error code when you try to turn it on?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Make sure that the Security Center service is configured properly, and then start the Security Center service. To do this, follow these steps:

  a. click on start, click on run

  (b) in the Open box, type services.msc

  c. on the right side of the window, locate the Security Center service in the list of services.

  d. right click on Security Center, and then select Properties.

  e. in the drop-down list startup type, select Automatic (delayed start).

  f. under service status, click Start.

  g. click on apply, click OK, and then close the Services window.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• What should I do if I get this message: __Service: 'ESET HTTP Server' (EHttpSrv) could not be installed. Make sure you have sufficient privileges to install system services

  What should I do if I get this message:
  Service: 'ESET HTTP Server' (EHttpSrv) could not be installed. Make sure you have sufficient privileges to install system services

  http://www.eset.EU/support/FAQ

  Read the FAQ.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot move all the files as windows explore crashes - it happens every time when you use an external hard drive (several readers have been tested and work on other machines)

  I need to move files on my laptop, but windows crashes Explorer everytime I try this. This also applies when you use an alternative program to explore. It didn't happen last week but regularly spent the last six months. It is now that I need to migrate these files (mainly the images, but also the music and office documents).

  The error in the Event Viewer log States the following: start the application failing application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, failed module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, offset 0x02db07e0, process id 0 x 1650 error, time 0x01ca547fd1de6851.

  Thank you

  Make sure that the device is compatible with Vista, the Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.

  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  You need to find the NAS device and the NICs in particular - but it would not hurt to look at all the when you're there.

  Go to start / Control Panel / Add Hardware and select the first option (recommended) to see if the system can detect the device.  If this does not work, choose the second and provide the information requested on the device.  You will be asked for drivers - have their practice.  Follow the prompts to install the device (NAS).  Make sure that it is plugged in and turned on when you do so, or he not be recognized.  It's the hard way of installing a hardware device, but your system obviously isn't automatically recognize it then do it manually. Here is a brief tutorial on how to do so: http://www.web-articles.info/e/a/title/Windows-Vista :-Running-the-Add-Hardware-Wizard /.

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• message "your purchase could not be completed" when you try to install Adobe Reader from the Windows store

  I try to install Adobe Reader Touch to my Surface installed Pro Windows 8.1 Microsoft Windows store.  I get the following message is displayed:

  "Your purchase could not be executed.

  Something has happened and it's impossible to make your purchase.  "Error code: 0 x 080070057.

  Only, this seems to be a problem with Adobe Reader Touch.  I was able to install applications from other vendors and Adobe (for example, Photoshop Express to the elements).  So it doesn't seem to be a problem with my Adobe account, or a problem with Windows Store system.

  Anyone have this problem?  All solutions?

  THX.

  Hi jjquinn75

  I recommend contacting Microsoft about this error message as it is returned by the windows store program.

  Furthermore, I you recommend to download the installer for Adobe reader offline using this link (Adobe - Adobe Acrobat Reader DC Distribution ) and then try to install on your device pro surface.

  Kind regards

  Rahul

• I get error 0 x 81000019 as a snapshot could not be created.

  Original title: error 0 x 81000019

  as snapshot could not be created. Check the event logs "VSS" AND "SPP" application for more information.

  Details: The specified object was not found.

  Error code: 0 x 81000019

  I wish that I kew how to solve this problem? I need back up my computer!

  Download new backup software help? I have an asus netbook with windows7 starter

  Help, please!

  Installed new hard drive and I have performed successful backup.

• Receive an error message, not enough space, when you perform a backup of the file in the HP Recovery Manager

  Hello

  I have a Pavilion dv7-6b32us using Windows 7 64 bit

  Laptop will not start. (A separate issue I posted on the card for laptop freezes) and Im trying to back up my drive through the HP Recovery Manager. I get a message that there is not enough available space. Y at - it anyay to save my disk to save the news?

  Hello

  Click Yes.

  Kind regards

  DP - K

• I get an error message "the installation package could not be opened" when you try to install the downloads (for example java)

  It comes up with a box indicating:

  This installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• Get ReferenceError: Error #1065: Variable Transform3DController is not defined. When you use the debugging.

  Hello

  I just upgraded my Flash Builder to 4.6. Since the upgrade I get the following error right when I run my web files through debugging:

  ReferenceError: Error #1065: Variable Transform3DController is not defined.

  Global / flash.utils::getDefinitionByName()

  at ominds.mouseinspect::MouseInspector/onTmd3dModuleLoaded()

  I don't know if it came from the new update to the constructor or if it comes to liberate an issue with the new 11,1,102,55 Flash Player. It seems that when I arrived to http://www.adobe.com/software/flash/about/ it does not even load the flash movie.

  I'm on a Mac OS X 10.6.8 and I use chrome for most, but this problem also occurs in FireFox.

  Does anyone have ideas to wtf is happening?

  Thank you

  -Nate

  This is Firebug Firebug/Flash, the origin of the problem. I had to remove completely all firebug on the addons of firefox so that he stop throwing the error.

• "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

  Original title: loss of entrance of Protocol in the list of saved files

  I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

  Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

  It's a good thing, I thought of the research on other boards for my missing post.

  HKEY_LOCAL_MACHINE\Software\Classes\mailto

  c. in the Edit menu, select new, then clickstring goodwill.

  d. type of Protocol of URL as the name of the new string value

  e. exit the registry editor

• Cannot connect to windows live messenger, error is could not close program when you try to download the new version of windows live messenger

  When you try to connect to windows live messenger, I have error message a new version of messenger is available for download. When I select Yes, wat happens in it will not download new version of windows live messenger but it says could not close the programs. Please help me again

  Hello

  Method 1.
  Here's how you can solve this problem:

  a. download the latest version of Windows Live Messenger available onhttp://explore.live.com/windows-live-Messenger-XP

  b. update of Windows XP through Windows Update.

  c. go to "C:\Program Files\Windows Live" and remove the 'Messenger' folder (Note: replace 'C' with your root drive letter)

  d. go to "C:\programdata" (Note: replace 'C' with your root drive letter) and remove Windows Live install and WLInstaller, if you have a

  e. restart the PC.

  f. run the installation program that you downloaded.

  Method 2.
  If the problem persists I recommend you ask your question on the dedicated Windows Live forums.

  Here is the link to the Windows Live Messenger category.
  http://windowslivehelp.com/forums.aspx?ProductID=2

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• URGENT... BUG in scrolling doesn't work not as expected when you use the navigation

  Hello

  I created this site for a client. He was literally works fine an hour ago. I just went to the post, and now when I use navigation, all my images, go to the left, even though I put them to fill.

  What could possibly get there? I'm supposed to show them this site tomorrow and now I can't. If you have any ideas, let me know.

  NOTE that this only happens when I use navigation. If I scroll it works. It is, however, very nervous.

  Home

  and here is the file:

  Dropbox - MicrositeRedesign02.zip

  Thank you

  Dave

  This behavior is caused by the white dots on the right side of the page master, forcing the content area (and thus the scroll in the browser area) is much wider than what you want.