Question: How do I assign a TOKEN for the class, field, method in the export file?

Similar Questions

• How to free up disk space for the database file

  Hi experts BDB.

  I use bdb4.6.21 transaction Btree access method, found that after vacuum db db-> truncate, the size of the db file has changed. How to free up disk file db space? It can be configured?

  Thank you

  Min

  Hi Min,

  What Mike says is that you do not expect that the empty space after an operation of truncation (for example a delete or update that empties a page) in the database (empty pages) to return to the file system and therefore to see the physical file size decreases.

  The next section of the documentation explaining this: required disk space

  Space released by removing the key/data pairs in a Btree database or Hash is never returned in the file system, even if it is reused when possible. This means that the databases Btree and hash are to develop alone. If enough key is deleted from a database which shrinks the underlying file is desirable, use the DB-> compact() method to recover disk space. Alternatively, you can create a new database and copy the folders of the former into it.

  
  

  So, as Mike suggested, you can dump and reload the data into a new database, or copy data from the existing/old database to a new (to remove the old database and rename a new one the old name), or you can try to compact the database using the method compact().

  If you use compact(), then in order to force the return of empty for the file system pages when possible, use the DB_FREE_SPACE flag and try to avoid using an explicit transaction (use a NULL tnxid pointer, so this BDB will use internally of several transactions that will be engaged periodically to avoid locking large sections of the tree).

  When you use the compaction in order to free up space and return pages from database empty in the file system that it is generally recommended to repeat Compact with a value low 'compact_fillpercent '.  In addition, the following output statistics fields in the structure DB_COMPACT, compact_pages_truncated and compact_pages_free should be examined to determine if there is a point, continuing to run the compaction with the same compact_fillpercent.  If the values are strict positive it is then compact() calling again with the same compact_fillpercent (and specify the DB_FREE_SPACE flag).  The compact algorithm allows a single pass on the pages of the database;  pages so not empty at the end of the file will prevent the free pages (which are placed on the free list) to be returned to the file system.

  Kind regards

  Andrei

• How to make a good UI for the selection of the channels with DAQmx

  A lot of my Labview programming accompanied verisons them previous LabVIEW (pre Labview 7), and there are a ton of new features I am digesting (currently using Labview 8.2).

  My question is (in general), how people schedule their user interface for the selection of channels and others when using hardware DAQmx?  What I have in mind is a system compacDAQ with a number of modules.  The user would be able to choose which channels to watch.  With the help of MAX as part of this process seems counter intuative and somewhat static (yes I know you can change out there, but it feels more like something you would use for something that doesn't really change much).  I wish that all the UI within the VI.

  Programmers use the task of creating screw for this or something else?

  Thanks in advance.

  ChuckNRC,

  I tend to avoid using MAX and create all my channels/tasks using the DAQmx functions.  There are also having some DAQmx features that allow you to save/remove channels, tasks and scales to MAX.

• How can I apply an opacity for the blending mode Script value?

  Hello

  How can I apply an opacity for the blending mode Script value?

  Is this something like?

  theLayer.blendingMode = BlendingMode.SOFT_LIGHT;  Add blendingMode with opacity for selected layers

  var opacity41 = opacity

  Thank you

  It seems that you have the right merge mode part. The other part of your question how to set the opacity of the layer value?

  It is like this:

  theLayer.property("Opacity").setValue (41);

  Dan

• How can I add session variables for the subject field and the body of the e-mail Message?

  How can I add session variables for the subject field and the body of the e-mail Message? Tried several combinations, but do not seem to correct the syntax.

  This is the code I have. I need to change all the form variables in $msg in session variables. The $to part is supported. What remains are the $subject and $msg fields.

  $à = « à : ». $_SESSION ["toemail"];
  $subject = '$firstname $lastname, your registration details ';
  $from = "from: [email protected]"; "
  $msg = "Dear $title $firstname $lastname\r\n\nThank for the registration for the design of your dream Home.\r\nWe have received this following details details of you-\r\n\nClient-\r\n\nOccupation: $occupation \r\nPhone No.: $phone \r\nE-mail: $email\r\n\nPresent $ location: \r\n location\r\n\nPresent address: \r\n$ address\r\n\n\nFollowing are specified by you - design requirements \r\n\nBasic Features\r\n\nNo." floors: $floors\r\nNo. of bedrooms: bedrooms\r\nNo of $. of bathrooms: $bathrooms\r\nFloor region: $sqft\r\n\nFurther Suggestions: $ Plan\r\n\nSplit one further\r\n\n\nType floor: $splitfloor\r\n-remarks: $splitfloorremarks\r\nOpen floor: $openfloor\r\n-remarks: $openfloorremarks\r\n\n\nList of the rooms to be Included\r\n\nFoyer: $foyer\r\n-remarks: $foyerremarks\r\nDrawing: $drawing\r\n-remarks: $ alive drawingremarks\r\nFormal: $formalliving\r\n-comments : $ alive formallivingremarks\r\nFamily: $familyliving\r\n-remarks: $familylivingremarks\r\nHome Office: $homeoffice\r\n-remarks: $homeofficeremarks\r\nDining: $dining\r\n-remarks: $diningremarks\r\nMaster room: $master\r\n-remarks: $masterremarks\r\nMaster bathroom: $masterbath\r\n-remarks: $masterbathremarks\r\nMaster Dressing: $masterdress\r\n-remarks: $masterdressremarks\r\nBedroom: $bed\r\n-remarks: $bedremarks\r\nBathroom: $bath\r\n-remarks: $bathremarks\r\nDress: $dress\r\n-comments : $dressremarks\r\nStudy: $study\r\n-remarks: $studyremarks\r\nLibrary: $library\r\n-remarks: $libraryremarks\r\nPowder room: $powder\r\n-remarks: $powderremarks\r\nPrayer room: $prayer\r\n-remarks: $prayerremarks\r\nKitchen: $kitchen\r\n-remarks: $kitchenremarks\r\nPantry: $pantry\r\n-remarks: $pantryremarks\r\nUtility/area of work: $utility\r\n-remarks: $utilityremarks\r\nBalcony: $balcony\r\n-remarks: $balconyremarks\r\nStore: $store\r\n-remarks: $storeremarks\r\nLaundry : $laundry\r\n-remarks: $laundryremarks\r\nVeranda: $veranda\r\n-remarks: $verandaremarks\r\nCar porch: $carporch\r\n-remarks: $carporchremarks\r\nGarage: $garage\r\n-remarks: Theater garageremarks\r\nHome $: $theater\r\n-remarks: room of $theaterremarks\r\nMaid: $maid\r\n-remarks: $maidremarks\r\n\nOther general remarks: $general\r\n\nPlease note that the fields have been left blank in your form will be considered undecided details and used in discretion.\r\nIf of the architect , it better to add more later, design requirements please feel free to reply to this email with the details. « ;
  $fla = mail ($to, $subject, $msg, $from);

  Thanks in advance!

  askintrades wrote:

  How can I add session variables for the subject field and the body of the e-mail Message?

  What you want to do? Given the nature of your question, it seems that you probably don't know what a session variable is used. The PHP manual describes the purpose of sessions here: http://docs.php.net/manual/en/intro.session.php.

  I need to change all the form variables in $msg in session variables. The $to part is supported. What remains are the $subject and $msg fields.

  $à = « à : ». $_SESSION ["toemail"];

  Why do you need to change the form variables in session variables? They are already stored in session variables, or they come directly from the form?

  The $to part is not supported. When you pass $to to the mail() function, it should contain only an e-mail address, not a string that begins with "to:

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• my phone asking me always Apple ID password of the account that I did not create. I have this account in my settings, but I don't know how to remove it. Thanks for the reply.

  my phone asking me always Apple ID password of the account that I did not create. I have this account in my settings, but I don't know how to remove it. Thanks for the reply.

  There are several places an identifier Apple is used on an iPhone.

  • If it's the Apple of a former owner of the phone ID, and it is in settings/iCloud grace to find my iPhone activated, ONLY the person who set up the Apple ID can remove (see: find my iPhone Activation Lock: a mechanism of extraction of the previous owner)
  • If it's the Apple ID in Settings/iTunes & App Store just log out, then log back with the correct ID of Apple.
  • Do the same for iMessage and Facetime, if that is where the Apple ID is used.
  • If he is asked during the updating of the apps means that applications have been purchased or downloaded using this code from Apple. To resolve this issue, you must remove the application, and then buy with your Apple ID.

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.

• How can I recover my pc for the first time that I bought?

  Hello
  How can I recover my pc for the first time that I bought? because my pc is so slow... I have a compaq laptop cq61... and I want to set up the first time... How can I?  I don't have a recovery disk because when I bought it dosnt have a recovery in it disc. Please help me. Thank you

  Hello

  I'm happy to help you

  Glancing at the screen shot you posted, your looks of partition fine recovery (recovery (D).

  Save your files on an external hard drive or flash drive (depending on how many you have).

  Once that is done, disconnect all connected to your PC, but the AC adapter.

  Start the PC and the HP welcome screen, press the F11 key to start the Recovery dialog box and follow the prompts.

  It should take 15 to 30 minutes and your PC needs to be restored to its factory settings.

  Then just reinstall all programs and files that does not come with the PC.

  You will need the files or the installation of program diskettes. You cannot back up installed programs and reinstall them using a backup.

  Paul

• Creating BBID token for the signature of invalid query results

  EDIT: WARNING: I may sound like a bitter ars * hole for some.  I'm not.  I'm grumpy and sarcastic, but generally happy and have good intentions.  If that is not met in this post, please accept my apologies.

  ----------

  I just installed Momentics IDE under Windows XP x 64 and I'm going to run a project (making the first application of waterfalls * beep *-EDIT: who says cr * p lol, because really, it * is * a cr * p app lol), and he wants a token of debugging. I find in the preferences and enter a password, and it jumps to the top of the web page to connect with my BBID (for BlackBerry Jam Zone). So I do that and it spits out:

  ERROR: Invalid query. Missing required parameters.

  I don't think it's a browser problem, but who knows. The page is apparently planned the use of IE and I went and made sure that cookies are enabled, but no change.  I couldn't think of something else IE would do is stupid.  So assuming it was something stupid (EDIT: lol), I tried the URL on the page in Chrome properties.  Same result.  Still think this isn't a browser problem (EDIT: lol) I tried Firefox (I have all these browsers, because I am trying to find one that does not suck.  It turns out that all suck somehow (EDIT: lol, first world problems huh? lol)).  Same result.

  Should I wait for the servers to stop playing with them?  EDIT: lol I wait for BlackBerry update the IDE?  EDIT: lol has anyone else had this problem?  Apparently not because my research give nothing... (EDIT: try to point out that I have * fact * research before posting)

  Creating thus a vendor account is released.  At the point where I have to present Government ID BlackBerry in order to run Hello world on a phone that I own, I check.  I want just a few keys to be able to run things on my phone.  BBOS was relatively trivial.  I applied for keys, key got sent to me, actually.  Isn't this possible in BB10?

  ...

  If it turns out that it is.  I finally realized that I could "bb10 code signing" in google and see if I could get the keys from outside the IDE.  Duh.  I didn't when I was half asleep.  Led me to https://www.blackberry.com/SignedKeys/codesigning.html where I could connect with my BBID without errors.  I was able to get bbidtoken.csk and it sat in my downloads directory.  I went through the record of signature and the Configuration Wizard in the IDE preferences and arrived to the party requesting the token BBID password.  I clicked get Token and instead of the page web to appear, he did what he needed to do and carried on.  I saved the token and certificate and noticed that the token in the zip file was different from the one I downloaded.  Don't know what is happening here.  Note that the browser was still open and connected to the area of Jam BB while I did this.  Not sure if this is important or not.  I thought that maybe a cookie was the key but the browser is chrome plated and the IDE using IE.

  So problem solved, sort of.  You don't have a supplier account to run applications on your phone.  Do you if you want spam BlackBerry World with bubble bursting games well.  Hope this helps someone in the future and I hope that BlackBerry corrects this bug, which probably didn't happen to me, because everyone has Windows 7, or something.  So for the record:

  Windows XP x 64 Version 5.2 (Build 3790.srv03_sp2_gdr.130306 - 1435) SP2

  Momentics IDE for BlackBerry Version: 2.0 Build id: v201310251603

  BlackBerry SDK native 10.2 installed

  Internet Explorer 8.0.6001.18702

  Google Chrome 33.0.1750.154 m

• How can I change an icon for the device in Windows 7?

  How can I change an icon for the device in Windows 7?

  In 'Control Panel\Devices and printers' I want to change the icon of a device that there are listed.

  Hi Dave Tavres

  I'm afraid to say that you would not be able to change this icon.
  This icon is provided by the hardware manufacturer, and is included in the drivers and architecture has no Windows allows to change this information.
  However, you can use the third party applications to change. Use your favorite search engine to find on the Internet.

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to delete some unused programs of my had drive and the PC deleted wlidcl.dll. How can I get this program for the PC works as before?

  I tried to delete some unused programs of my had drive and cleared PC wlidcl.dll How can I get this program for the PC works as before? The PC works now as slow as a snail climbs.  What do you suggest me? Thank you

  Norman.--

  E-mail address is removed from the privacy *.

  original title: wlidcl.dll

  Hello

  I suggest to follow the steps below and check if the problem persists:

  Not one:

  Uninstall Windows Live essentials followed the procedure described in the link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step b:

  Download and install Windows Live essential from the link:

  http://explore.live.com/Windows-Live-Essentials?OS=other

• How can I create a shortcut for the recycling bin in my office?

  Original title: Recycle bin shortcut.

  Anyone know how I can create a shortcut for the recycling bin in my office context menu (context menu)?

  Sorry Manu B G, but I think I understand what he wants exactly. This isn't a desktop shortcut but a shortcut context Menu. He wants a right-click on any empty space in the office and click Recycler Bin shortcut in the menu to go to the basket. Any way to do it?

• How can I reset Adobe Acrobat for the default settings?

  How can I reset Adobe Acrobat for the default settings?

  Hi sharonc7 ,

  You can try to reset the preferences, here is a link on how to reset preferences: How to reset preference settings in Acrobat format.

  Also. Visit this link, which deals with the same subject: How to reset Adobe to its original settings? (Acrobat Reader) .

  Thank you

  Shivam

• could you please tell me how to start to make flowers for the party and is the best soft

  could you please tell me how to start to make flowers for the party and is the best soft

  I've never done this, then go to desktop applications Adobe Creative Cloud | Adobe Creative Cloud and click on programs to read a description of what each program does