Extend the permit

Similar Questions

• Unable to repair the permissions of the library!

  Hello

  I'm pulling my hair out trying to restore access to my library of Photos...

  My photo library is located on a Synology NAS. After update macOS Sierra, I would lose permanently the connection to my NAS. Someone on another thread said to use SMB instead of the AFP for file transfer services. I did, and the connection has remained stable; However, since any attempt to open the pictures gives me an error message "repair permissions Library" and wrote "this library is locked or you don't have permissions to make changes. Photos can try to repair the permissions'.» I try to repair the library, and after about 20 minutes, I get "error repair permissions.

  Finally, I opened the console to see what was going on, and that's what I saw when the error occurred:

  Library Permission repair failed: error Domain = RKRepairLibraryPermissions Code = UserInfo '(null)' 3 = {NSUnderlyingError = 0x61800025ecf0 {error Code Domain = com.apple.library - repair.error = 4 "(null)"}}

  If anyone can decode this to give me a clue as to what is happening and how to fix it? Or is there any other suggestions?

  I would appreciate any info at all...

  See you soon,.

  Chris

  Vancouver, BC

  My photo library is located on a Synology NAS

  Photos is not compatible with the NAS volumes.  Photos libraries need to be located on an OS X Extended (journaled) formatted volume.

  So, copy the library on a volume formatted correctly and open it with Photos.  You may need to repair the library by launching it with the command and Option keys.

  

• You cannot change the permissions of the user

  Hi guys,.

  I have a MacBook Air, which started with the 10.11.4 2014 loading screen and would be turned off once the progress bar moves to halfway.

  I ran MRI what diagnosis came thin and storage said it was a software error.

  I removed the SSD drive and placed in a basket so I can see the SSD on my iMac. He goes (to the Mac OS Extended format) and I can see the folder of the user, but under "Sharing and permissions", she says that I can read only. In most cases I would be directly click on the padlock on the bottom right, change the privileges and choose "apply to included items", but it is all grayed out.

  I ran and fixed the permissions through terminal (since I can do is no longer on the disk utility). No idea how to get around this problem? There are files on the SSD drive which unfortunately were not backed up.

  Note: I also tried to run BatChmod but it has not fixed either.

  Any ideas?

  Your help would be much appreciated.

  Thank you.

  Repairing permissions has no effect on your Home folder.

  Reset permissions on your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• How can I change the permissions for an external hard drive?

  Hi, I have a little problem... I used an external hard drive on my pc windows 10 and now I try to copy my files on my iMac, but the thing is I can't delete my files from my hard drive because I can only read them. So I want to change the permissions, but I do not know how... Can someone help me with this please?

  Thank you for your time.

  This means generally that the volume is formatted to NTFS, at which case it must be reformatted or software such as Paragon NTFS installed on the Mac.

  In case this happens to a FAT32, exFAT or volume Mac OS extended, either the volume's directory structure is damaged, it is locked in the material or the player has felt that it is about to fail.

  (138025)

• ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  Objective: move vmdk to store data with adequate storage and then increase storage D: 20G to 100G

  Converter is not available on this architecture. Can I migrate cold vm to the different data store, no prob.

  Question: Without use of the converter, method 3 can be used without a secondary vm? In other words, just by using target vm offline, online, offline? Or is it a problem of signing/OS disk on the Windows Virtual PC?

  I need to move vmdk in different LUN and extend drive vm windows on D: (non-OS drive). Is this possible via the single procedure? Options?

  To use method 3 to http://communities.vmware.com/thread/81121 requires available vm 'secondary', I did not.

  Method 3? Using of vmkfstools and another VM of Windows to extend a drive

  o stop the VM to resize

  o log in the console ESX Server via Putty

  o Type? vmkfstools? X & lt; new size of drive & gt; vmfs/volumes / & lt; storage volume name & gt;. / & lt; virtual server name & gt;. / & lt; the virtual disk name & gt;? That is to say. /vmfs/volumes/Storage1/my_vm.VMDK new disk size can be specified in kilo, mega, or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk of 20 GB of 24GO you would put 24000 m or 24g

  o the second virtual machine to help stop

  o change the second virtual machine settings and add the first virtual machine hard drive

  o power on the second VM and load the disk management snap-in and verify that the first virtual machine disk has unallocated on it space

  o select Start, run and enter diskpart.exe

  o the command? the list of volume? This will show you all the volumes.

  o select your volume based on the results of the list volume command, IE. ? Select volume 1?

  o type the command? extend? to extend the volume

  o check again the disk management snap-in and the volume is expected to be expanded with a greater ability

  o stop the second VM and remove (do not remove) the record of it

  o turn your first VM and the new space should be there and ready to use.

  Also, I'm already aware of Dell extpar:

  http://www.RTFM-ed.co.UK/?p=1310

  http://support.Dell.com/support/downloads/download.aspx?c=us & CS = 19 & l = in & s = DHS & ReleaseID = R64398 & formatcnt = 2 & starts = 83929

  for VI3, vmoiton of storage is made by RCLI plugin or a 3rd party

  I prefer the plugin

  http://www.virtualizationadmin.com/articles-tutorials/VMware-ESX-articles/VMotion-DRS-high-availability/storage-VMotion-SVMotion-VI-plugin.html

  In addition, if the option to increase the size of the disk in the VIC is grayed out, it sounds like a permissions issue.  Finally, you can not extend the disc using the VIC, if the customer in question has a snapshot.

• Impossible to extend the existing wi - fi with time capsule airport

  Hello

  I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

  I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

  In addition, I have an Extender provided by the ISP of lower level.

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  I tried several times to do so, but either it freezes up or creates its own network despite the

  mode bridge as stated in Airport utility.

  Guide gently with the method or Protocol correct to put that in place.

  Thank you

  Jay

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  It sounds like you may try to extend the network of your "main" router wireless

  The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

  So, the first question to ask here would be... What is the number of brand and model of your router "main"?

  If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• How to extend the life of my MacPro 2006 1.1?

  I'm hoping to extend the life of my 2006 MacPro1.1, whose startup disk has developed a Squeak. I have received conflicting advice from vendors on a possible solution and would like knowledgeable opinions.

  Here is a partial configuration:

  A Macintosh 500 GB HDD with 87 GB available.

  A hard disk of 1 TB with 332 GB

  A hard disk of 2 TB with 1.3 to

  I'm running OS X 10.6.8

  Is 6 GB memory

  My Time Machine backup measures about 1.8 to

  Option 1. A local store recommended I have delete the 2 TB drive and restore the backup any here, which makes my new startup disc. My concern is that there is very little free space on this drive and an already slow computer would become even slower.

  Option 2. A seller of phone encouraged me to replace my 500 GB hard drive with an SSD, which according to him would be much faster than what I have now.

  You choose Option 1 or 2, or another altogether?

  Thank you very much

  Peter

  The hard drive containing the boot the Mac volume has failed and must be replaced. An SSD is an interesting option.

• MacBook Air how to extend the timer

  I listen to a tape of meditation 1 hour and 14 minutes and it stops after an hour

  How can I extend the timer to last more then 60 minutes? It's a Mac Book Air 13

  Not sure about "Timer" you mentioned, even if your MacBook Air does not work in mode "sleep" more than 1 hour of system preferences > energy saver, and then set computer sleep more than 1 hour.

• for months now, I can't watch anything with flash, as it insatlls but does not work, it is defined as still active in the list of addons, and the permissions are active

  I 35.01 FF and can't watch videos requiring flash, it installs ok (or seems as indicated in addons with correct version number) and is set to "always active" in the addons, and I set the permissions on some sites to 'always', but nothing helped. I have now returned to use IE, I would prefer to use FF, but this problem is driving me crazy.
  Thanks in advance

  Dear john99 Further info, I disabled plugins RealPlayer and as you can imagine, they seem to interfere, I activated the flash stopped again, them off and flash now works. Thanks for you input it was greatly appreciated. I can now safely, go back to my beloved FF :)

• With the help of a second domestic airport to extend the network

  I have an Airport Extreme (MD031LL/A), connected to a modem via an ethernet cable and it works perfectly as a WiFi router for my house. I have also an Airport Express (MC414LL/A) I want to use as a second router to extend the reach of the Wifi signal, which works when connected via a cable to the Airport Extreme (continuous green light), but when I unplug the ethernet cable the Airport Express falls out of the network (Amber led flashing). I've updated the router time firmwear and repowered and reset everything, including 'forget' the devices via the Airport utility which I got on my MacBook Pro, but not luck. Books Online says the network should see the second router, waiting with flashing light amber, but it does not work.

  Any suggestions?

  Please note, it is not ideal for me running extended ethernet cable, I would like to as the relay to be wireless.

  I am assuming that you are using a Mac running a current or recent operating system... or... you use the installer on an iPhone or an iPad, right?

  If you want the AirPort Express to extend wireless signal in AirPort Extreme... then you would not use an Ethernet cable to the configuration... Since the installer detects the Ethernet connection and configure the AirPort Express Terminal accordingly.

  However, if you are able to locate the Airport Express where you need more coverage... and... an Ethernet cable from the Express back to AirPort Extreme... which must remain connected permanently... This would be the way to go.  The reason is that you will lose about half of the potential speed on the entire network when you try to Express to extend the network using a wireless connection.

  But, if you can not run the cable, you can not.  If you need a little more advice on installation, after return to confirm how the Express connect to AirPort Extreme and let us know what operating system is installed on the device you will use to configure the Express.

• Miserable attempt to extend the Boot Camp partition

  Long story as short as possible - 2011 MacBook Air with SSD 256 GB internal. Originally divided 50-50 between OS X and Windows 7 using Boot Camp Assistant. Yesterday I needed more space on the bootcamp partition. I managed to make OS X smaller using the partition disk utility but Windows Disk Manager would not extend the Windows partition because the newly created free space has been before it, not after. Rather than use one of the appropriate options to move the Windows partition, I made the mistake of trying AOMEI Partition Manager to get it within Windows. Of course, 96%, it failed saying that the partition table has been locked and forced me to restart. After that, no partitions are bootable disk.

  I installed 10.11 on an external USB HDD to get the system started. In disk on the internal SSD flash disk utility, I see the Bootcamp partition always there (and can be fitted very well so it was moved successfully), but he does not see the OS X partition.

  

  Don't lose the content of the OS X partition is no big deal that I have a time machine backup, I can restore. But at this stage because the partition table is messed up, I can't reinstall OS X disk without blowing the bootcamp partition and I want to preserve as much as possible.

  In general, I am fairly computer-savvy, but completely green when it comes to partitions. I realize now that I should have followed one of the tried and true Mac-specific methods to do this. Mea Culpa!  Anyway, here is the output of the commands that I saw others provide:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Microsoft database BOOTCAMP 208,9 GB disk0s2

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 256.1 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 217,3 Untitled GB disk1s2

  3: Apple_HFS disk1s3 37.8 GB model

  4: disk1s4 Apple_Boot Recovery 650.0 MB HD

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 1023 255 63 [1-4294967295] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  sudo TPG - v - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 81794965

  82204605 408026050 2 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490230655 4064

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  So it is possible to get the disk to the point where I could reinstall OS X on it without harming the existing bootcamp partition (as well as create a bootcamp partition begins once more)?

  Thanks in advance for an expert, you can provide.

  Yes. Please download GPT Fdisk to https://sourceforge.net/projects/gptfdisk/ and we can fix it. Your 2 GPT entry should be from 409640 and GPT 3 should start 82204605.

• Extend the network wireless with roaming function

  Hello

  I was looking for some advice on my project to the top. I currently have my SKY router (wifi off) connected to an older time capsule which is almost full, so I'm about to buy a new one and I can use the old one plus one new airport extreme/express to extend the network of thought. I think three points would be best as its quite a large sector, I wish to address. I would like that it either under one SSID using the roaming capabilities I've read are possible with the airports and would hand off a signal strong etc.

  Unfortunately, I don't have the option of it being fully wired but planned to use the powerline rather than wifi adapters because I don't want to lose too much speed. I use power lines now an extension of netgear and performance are pretty good with very little loss, although the multiple SSID bothers me so want to change.

  Can someone advise if the setting above would work or if there is a better way (without cabling package together) and if I would be best for extreme or the express for the 3rd point?

  If anyone has any configuration Advisor if this is the best set up then that would be also appreciated?

  Thank you very much

  Iain

  I use power lines now an extension of netgear and performance are pretty good with very little loss, although the multiple SSID bothers me so want to change.

  Configure each extension to use the exact same network name (SSID), the same level of security wireless and same password wireless. Then you will have a roaming network.

• Impossible to extend the AirPort Extreme wireless network

  I have a wireless network set up with a time Capsule airport 4th generation.  I'm trying to take my old AirPort Extreme wireless 3rd generation. I have double. Kettle has implemented, but I get the status message on the extreme that it cannot extend the network.  I can get a strong signal on my iPhone from the point that I have placed extreme itching so I'm close enough to the time Capsule.

  Could I use a connection by current bearer through my home wiring to the extreme and extend it like that?

  Does anyone have any suggestions?

  Please follow these steps closely and report on your results.

  Power off time Capsule airport.

  Wait 10 to 15 seconds

  Power up Time Capsule airport

  Reset the AirPort Extreme back to default factory

  Set up AirPort Extreme still extend wireless signal of the time Capsule

  Report on the results

• Loop slider does not appear when you move to the right of the loop; may not extend the duration of the loop; aaarrrgh.

  Have checked tutorials and help , but doesn't understand why hovering over the right angle, at the top of the track loop not give me the slider that allows me to draw on the track and extend the playback loop.

  Long kickflip is the one that gives me a problem right now, but Latin Bembe Cowbell does not work for me either!

  It is my first try at GarageBand, and maybe my last very soon.  Thanks for easy to understand help you send.

  The two loops work very well for me in GarageBand 10.1.1. Skip on the upper right corner of the audio region to display the cursor of the loop, if it is not, save your project and the test in a different project.   Restart your Mac, if you don't have already done.