Extended automatically Y460p

Similar Questions

• 'Lines' of the table does not automatically extend as added content?

  This is a table of Storyboard, built with a simple table.  Three columns: one for the images, one as a spacer, a text.

  I did the storyboard to the origin in the Pages, and then converted in Word to work with a partner, now converted to Pages yet.  It seems to be OK except for one thing:

  Before, when I would write in the text of the text column... the line would extend automatically as the text was written, at least in the size of a page.

  Now, I think lines are somehow "locked" and does not (at least one page), extend this text and images, are "hiding" because the line is not normally develop as she would have.

  Is there some click preferably a place that keeps my lines to a constant size, any content is in every cell?

  Or maybe it's a corruption caused by going to Word and back?

  All ears,

  Ben

  V4.3 Pages ' 09, or permit Pages v5.6.2 splitting a line beyond the limits of the page, so limit the content of text in a cell a to a single page. I just copy and paste a page full of text and he dropped in the first row, cell 3. It is automatically extended to the bottom of the page and not details. There is no hidden settings in Pages that will be substituted for this limitation.

• all-in one want 5540: automatic extension tray

  I just bought the printer ENVY 5540 and wanted to know if automatic extension tray should also retract automatically when I stopped the printer. It extends automatically when I start printing, but I have to manually replace it once I'm done. The State plug it is auto - so I guess it would also retract when I turned off the printer. I hope that someone knows? Thank you.

  Hello
  
  Thank you for using the HP forum.

  Extension is automatic while the retraction is manual.

  Thank you

• Envy 7640: Envy 7640 out automatic tray extension

  Is it safe to manually push in the extension of the tray out Auto after turning off the printer? I don't want to break it, but the part extends a bit and I don't want the snag on something or it stand out when it is extended. Since it extends automatically, I expect he could go automatically, for example when the power is off.

  Hello

  Its OK to manually push the Extender after the filming of the printer.

  If you don't want to use the Extender at all, you can lock the position of the extension by pushing the switch on the back of the Extender to the "lock" icon

• Automatically expand a Hide and Show model region when the Page loads

  Hello
  
  I work with a Hide and Show region model, and I'm trying to accomplish the following:
  
  When my Page loads, if a PX_ID is not null, hide it and see the area should be extended automatically.
  
  I use Apex 4.1.1.
  
  Any ideas?
  
  Thank you
  
  Erick

  Hello Joe,

  Thank you for your response.

  This morning, I was looking for a solution in the forum and I could not find anything. Now, I decided to keep looking for more careful and I found a solution.

  For those interested, check this thead element: Re: hide/show the region

  Basically, I created a dynamic Action with the Code JavaScript: $('.t20RegionHeader') ('img') .children ravishing ();

  Thank you

  Erick

• Permanently expand messages received according to grouped by sort by date. (Thunderbird 38.3.0 on Windows 7 Pro)

  I have my Inbox unified view > sort by Date, descending and grouped by type checked. I have to develop the individual dates, each time I start Thunderbird or if I go to a different folder, then back to the Inbox. Is there a way for dates to extend automatically or stay in a developed State and no default reduced? Thank you.

  Sorry krrath
  My mistake; I should have read your information correctly, because you don't speak not a son.

  I checked bugzilla and found that the same or at least very similar bug was posted ages ago

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=387098

  I would like to draw your attention to the last comment. The person has posted a workaround solution. Could you try and see if it works for you.

  oberwipf 2015-10-25 20:38:42 PDT
  It seems that I found a solution for me. Now, all groups are developed, when I select unified inbox. I hope this works for you all, too.

  1. Select unified inbox
  2. view > sort by > threaded
  3 view > threads > expand all discussions
  4 view > sort by > sort group

• Scanner printer Envy 4520: don't go back not envy 4520 holder

  Hi have a HP Envy 4520. The arms of paper comes out but dosent auotmaticly back to the printer after that I have remove the paper?

  Welcome to the HP community @Richsand007,

  The paper on the 4520 desire support arm is spring loaded so it can only extend automatically. To retract the arm manually, you have to 'push' the arm back, because there is no component built into the printer it retracts automatically.

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HP Envy 5640: HP Envy 5640

  Hi, the paper that extends automatically closes when the printer is stopped

  Hello @Merrony,

  Welcome to the Forums of HP's Support. I understand that you would like to know if the output tray extension retracts automatically. I would like to help.

  The answer is no you will have to manually close.

  Curiously, this is not mentioned in the Manual.

  If you have any other questions, feel free to ask.

• The single Win Explorer Navigation pane click on the name of the folder to expand the subfolders

  In Win XP, you can even click on the folder name to develop the next level of subfolders.

  In Win 7, it takes a double-click and the > is difficult to achieve.

  What a pain.  How can get fixed?

  Other than replacing by another file manager.

  Hello

  I understand that you are facing difficulties during the expansion of the subfolders on the Windows Explorer Navigation pane. I understand the inconvenience.

   

  You must expand the tree first and then do the following.

  1. open WindowsExplorer.

  2. expand and click on Tools folder options -->

  3 in the navigation pane, select the check box to display all records and extend automatically to the current foldedr and click ok.

  You can also follow the steps in the article.
  http://support.Microsoft.com/default.aspx/KB/126449

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Cannot clean print heads

  HP Officejet 4500 wireless

  Mac OS 10.7.4

  Trying to clean printheads by using the HP utility and after a minute, the process stops and a message appears on the computer that "cannot complete the cleaning. Contact HP support. "Could not find the solution on the HP site.

  bluemoon6749,

  Cartridges probably needs to be cleaned manually.  Click here to see a detailed description of which follows the steps of troubleshooting problems in printing quality on the HP Deskjet 4500 series with an operating system Mac OS 10.6.8.

  Solution: use genuine HP cartridges
  Solution 2: allow the all-in-one to rest
  Solution 3: Check the paper
  Solution 4: Check the print settings
  Solution 5: Check the ink levels and replace the cartridges of weak or empty
  Solution 6: print and to evaluate a report of extended automatic test and resolve defects
  Solution 7: replace the cartridge of the problem
  Solution 8: the all-in-one service

  You can click here to see the detailed description of the following blinking lights on the printer and what to do.

  NOTE: an E may also appear in the display of the number of Copies. It is a further indication that there is a problem with the product that needs to be resolved. The presence of a E, however, does not affect the meaning of the blinking lights and can be ignored for troubleshooting purposes.

  NOTE: there may be is more than one solution for some models of flashing lights. After finding the model that corresponds to your model of flashing lights, try each solution in the order presented until solve you the problem.

  Question: All the lights are off
  Question: The power led will blink slowly, and all the other lights are off
  Question: The flashes power and ink level lights and the display of the number of Copies are on
  Question: The power indicator flashes rapidly for 3 seconds and then remains on
  Question: The power light and the Attention led will Flash rapidly for 10 seconds and then remain lit
  Question: The flashes Attention and an E appears on the display of the number of Copies
  Question: The Attention led flashes and a! appears on the display of the number of Copies
  Question: The light of Attention and one or both the level of ink lights flashing
  Question: The lower one or both of the ink level indicator lights will Flash and a fast blink! You may see
  Question: The power light and the Attention light flashing rapidly
  Question: The power led blinks slowly for 15 seconds and then flashes quickly and the Attention light is off for 15 seconds and then flashes quickly
  Question: All the lights are flashing
  Question: The Wireless button light is on
  Question: The led of the wireless button is disabled
  Question: The Wireless button light is the 6 seconds and then slowly flashes
  Question: The wireless button light blinks slowly
  Question: The Wireless button light and the Attention led will Flash quickly
  Service the all-in-one

• In the Windows-left pane Explorer view options.

  How do you get Windows Explorer to open with the following folders not expanded:

  • Favorites
  • Recent locations
  • Libraries
  • User
  • Control Panel

  Ideally, I prefer recent locations and Control Panel does not display in Windows Explorer.

  TIA, Gerry Cornell

  Show all folders displays or removes the control panel and the trash of the Explorer folder tree. Right click on the (recent locations) items under Favorites for 'delete '.

  You might find this useful: http://www.howtogeek.com/howto/17415/set-the-windows-explorer-startup-folder-in-windows-7/

  None of my folder trees extend automatically when I open or Explorer but darn if I can remember what I changed. The only exceptions are favourites and libraries records recall the State they were when I closed last or Explorer... ie. If they have been expanded, they re - open wider and so reduced that they remain collapsed. If I view the Control Panel, it seems to behave in the same way.

• Solution of blackBerry Smartphones for the contact numbers display does not work

  I want to see alongside my contacts phone numbers, but when I try the recommended solution (open the tray-> options-> language-> global name display), it gives me two options: 1) first, last and 2) Last, first.

  Neither of these options will display the numbers as well as names. I tried to turn on and off as well.

  I use a new torch bought new, SIM-free and sealed on Ebay in the United Kingdom. It is clear from the stop icon it is an O2 mobile. My network is CytaMobile Vodadone. Grateful for any help.

  Second question: when I type SMS messages it has only a tiny line to enter a big gap of empty space between the beneficiary and as I type. I'm used to having a bigger screen to type on even on a basic phone. no idea how to change this? Thank you!

  Apart from that, I think that my blood pressure has dropped, now that I don't have to continue running to a PC to check what email I might have missed.

  Hello and welcome to the forums!

  I don't think he has no option in the stock OS to display the numbers next to the names of the contacts.  You might be able to do this with an application of part 3, but there is no way to do this with the unit as is.

  It is also impossible to change the entry in the SMS app, I'm afraid.  The line will extend automatically as you type a message, but it starts with just the line.

  Sorry to be the bearer of bad news.

• Select the simple click expand in the Windows 7 Explorer to win.

  On my XP system files tree extend downwards when I selected a folder that had subfolders inside instead of having to rely on the system.  How do activate you this option to Windows Explorer in Windows 7 If you don't have to click on the > symbol?

  Hi Stackhouse,

  Welcome to the Microsoft Answers site!

  You must expand the tree first and then do the following.

  1. open the windows Explorer.

  2. expand and click on Tools folder options -->

  3 in the navigation pane, select the check box to display all records and extend automatically to the current foldedr and click ok

  You can also follow the steps in the article.
  http://support.Microsoft.com/default.aspx/KB/126449

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error ' ' system timer was triggered "and hibernation / sleep problem.

  Original title: Hibernation and sleep problem?

  I bought a new laptop of Toshiba C55 series probably a little a month ago and for a while, it was fine, I had no problem. I had some mistakes with what is called a bad pool header, I've not experienced this once again. My main problem is with the sleep and hibernation. I went and disabled any parameter that would be extended automatically to my computer after a short period of time. It is set at only hibernate after like five hours, I'm never away from him that long. I don't want it to hibernate unless I put it specifically put into hibernation. I heard talking about hibernation is hard on your computer. I am usually only away from him for a couple of hours, so it's easier to have it in sleep so I can come back and get the right to return to work or what I was doing. I put it in mode 'sleep' whenever I need to go away for a few hours, for some time, I had no problem, he would go to the mode standby and stay there until I woke it. My problem is that most of the time when I put it in fashion watches, it goes to the hibernate after only a few minutes. WHY would he do that? And how can I stop it? There are times that I put him to sleep and he done as it should. Most of the time, but it goes to the hibernate after a few minutes. I don't want to make this period. Is there a setting I'm missing, I have conflicting settings on something? What is a small problem with Windows 8, or with my computer itself? The last thing I want to do is to restore it to factory settings and lost all the things that I have saved and have to reinstall my programs again.

  There is also something else showing in my event viewer I've ever seen before. That means when he says "system timer was triggered." And can someone tell me what means the bad pool header error and how to fix it?

  I found a solution, I noticed when I Hibernate the computer at night to go to bed is when it remains not in mode 'sleep'. I stopped it in hibernation at all now and it says in the mode "sleep" very well.

• Glossary expanded text headings are displayed by default

  I have a WebHelp project created with RoboHelp 2015. I have problems with the text of glossary extend automatically without clicking a glossary term in a topic. This seems to be associated with the search function. For example:

  1. Open the exit of WebHelp in IE or Chrome.
  2. In the Find box, type a word or phrase (for example, 'Agent')
  3. Click on one of the topics returned by the search.
  4. Any topic that has a term to the glossary automatically displays the text of expanded glossary.

  This should not be the case. When you open a topic, no matter if you found via search, the table of contents, or else, glossary of terms does not automatically display the text expanded glossary. You have to click on the term to display the expanded text.

  Has anyone experience this problem? Any suggestions about how to fix it?

  All texts in the glossary are developed? Or that those containing search found in the search words?

  The second scenario is as expected. If the player searches for a Word and go to the page, RoboHelp will highlight all occurrences. Also those in a drop-down list. Don't not do can be confusing for your drive because they can't see the word they were looking for.

  You can also disable highlighting of search. This should stop the behavior as well.