'Lines' of the table does not automatically extend as added content?

Similar Questions

• a key for the table does not exist in the table

  Hi guys,.
  
  I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
  Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
  "a key corresponding to the table does not exist in the table blablabla. You want to create a? »
  
  In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
  
  Thank you

  Hello

  It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.

  Thank you
  Imtiaz.

• Insert in the table, the table does not grow

  I'm currently learning Labview 2009.

  Problem:

  I have a chart 2D with 3 columns I initialize outside my main loop.  In my loop, I want to add new lines in the table as I collect the data.  I tried to use "Insert into array" but can't seem to get new lines to add.

  I've attached an example VI to show you what I'm doing.  Basically, I initialize the table outside the loop to 0 rows, 3 columns.  Inside the loop, I look at the number of rows found and then try to insert a 1 d of the 3 column table.

  I am an old VS / encoder VB trying to adapt some skills to Labview.

  The purpose of this table is also to collect temperatures over a period of time and to determine the overall variation over a given period.  Additional ideas would be welcome.

  You can use a shift register and build the table. See attached example

• If else check box in the table does not properly

  I'm new to this forum and hope someone can help me with that.

  I created a dynamic array and I have 2 types of boxes.

  One is a check box for the individual lines that fills a value in a cell. Otherwise, it will be zero.

  Another is a master checkbox that activates the check all lines and value box

  Problem statement:

  When I click on the master check box, every individual is selected. However, the value of the cell is incorrect. Value of all the rows is based on the value of the first row.

  Here is my code:

  Master Checkbox (using the formcal in click):

  If (CheckBoxAll == "1") then

  Table.Row1 [*]. CheckBox1 = "1";

  Table.Row1 [*]. Cell4 = table.row1 [*]. Cell2;

  on the other

  Table.Row1 [*]. CheckBox1 = '0 '.

  Table.Row1 [*]. Cell4 = 0;

  endif

  Check box for the individual line (using the formcal in click):

  If (CheckBox1 == "1") then

  Cell4 = Cell2

  on the other

  Cell4 = 0

  endif

  Otherwise, I tried to turn the master value of the box fill off & put a validation in each line instead. This time it works! but it kept prompting a message for each rows whenever I unchecked the box: "the value of Checkbox1 is not valid.

  Here is my code:

  Master Checkbox (using the formcal in click):

  If (CheckBoxAll == "1") then

  Table.Row1 [*]. CheckBox1 = "1";

  on the other

  Table.Row1 [*]. CheckBox1 = '0 '.

  endif

  Check box for the individual line (using the formcal to validate the event):

  If (CheckBox1 == "1") then

  Cell4 = Cell2

  on the other

  Cell4 = 0

  endif

  Appreciate all the help that I am at a loss as to why the tis error occurs and how to solve it.

  Thank you!

  Hello world

  I managed to find a solution to my problem. I write for the benefit of any1 facing the similar problem.

  I changed formcal to Javascript.

  Master box (Click event):

  vRows var = Table._Row1.count;

  for (var i = 0; i)

  {

  If (this.) RawValue is "1")

  {

  xfa.resolveNode ("Table.Row1 [" + i + "]"). CheckBox1.rawValue = "1";

  xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell4.RawValue = xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell2.RawValue;

  }

  on the other

  {

  xfa.resolveNode ("Table.Row1 [" + i + "]"). CheckBox1.rawValue = "0";

  xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell4.RawValue = 0;

  }

  }

  Another point to note, it only works for the table of data binding. If the row in the table has been created original, somehow the Table._Row1.count does not work. It detects that the value = 1.

  Thanks to all who tried to help me!

• color of the table does not reset

  My table (TABLE of SUM AVG) is supposed to show entries below zero in red. He has a little problem. The first time that it works, but the second time that the color of the text will not return to black when I run again.

  He remembers the entries that were red on front. Based on my wiring below, the second time I run it, it must set the background color to the light yellow and black text, then make loops for.

  BTW, I also used a sequence flat to force this order, but that did not help.

  

  Hi murchak,

  What can be seen in your picture you

  -only value a "yellow light" cell background: ActiveCell = (2, 2)

  -and then you assign the first 3 lines "light green" background

  -then you set some cells, according to their value to red. (Btw. There is a special ' ")<0" function="" in="" the="" comparison="">

  There is no place where set you a black background for all cells.

  Maybe you should try ActiveCell (-2; -2) instead?

• the tables does not work in flash lite

  I couldn't get a multidimensional array to work in flash lite, then tried a regular table - is not no longer works.
  
  Copy the following code works:
  
  var myVar;
  myVar = 5;
  answer_true_button_btn.onPress = function() {}
  points_txt. Text = String (myVar);
  };
  
  This code does not work:
  
  var myVar:Array = new Array (5);
  myVar [0] = 5;
  answer_true_button_btn.onPress = function() {}
  points_txt. Text = String (myVar [0]);
  };
  
  Now do multidimensional arrays.
  
  I tried in Flash Lite 2 and 2.1.

  Here's the problem: I had 1 selected ActionScript (even if Flash Lite 2.1 has been selected in the box 'Version') in the publication settings. Apparently, you write in AS 1 or 2 AS and publish in Flash Lite x.x.

  Flash Lite 1.1 does not support tables, with the exception of the latest version.

• •Relevez in the morning does not automatically work on iphone5s

  I have an iPhone5s and I waited to lift wake up option in ios10 but after I downloaded the recovery for wake option does not work on it

  only iPhone sorry 6 and the iPhone is and 7 are eligible to do this

• How to make a video of the muse does NOT automatically.

  Hey guys,.

  I worked on my portfolio website and I just completed and transferred my show reel. For this video, I decided to integrate it within the muse herself, rather than upload on youtube. I created my html code just by watching a few tutorials, however, no matter what I do the video will play automatically as soon as lance Web site.

  This is the code I use:

  < iframe title = "my showreel |" 2016 | Show Reel"width ="853"height ="480"src ="http://mywebsite.businesscatalyst.com/assets/myvideo.mp4"frameborder ="0"allowfullscreen > < / iframe > "

  Is could someone please tell me what I need to add to it to make it simply play when the person presses play.

  Thank you

  Liam

  Hello

  Instead of Iframe I advise you to use the HTML5 video tag to add the video.

  Please see an example in the link below:

  How to integrate a mp4 video in my muse site.

  Kind regards

  Vivek

• How to generate a value of 0 if the table does not value contain?

  Hello
  
  I have a nice select gives me these results:
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:01 36.6 01/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:02 63.4 02/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:03 73.2 03/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:04 78.6 04/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:05 98.8 05/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:06 2008-06-30.4
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:07 23.8 07/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:08 70.8 08/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:09 14 2008-09
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:10 60.4 10/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:11 46 11/2008
  
  You see, the month 12 is missing, because no data exists in the table. OK, that's normal.
  
  But I want to display the result 0 even if nothing in the table for the month 12. The result would be:
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:01 36.6 01/2008
  etc...
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:11 46 11/2008
  f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:12 0 2008-11
  
  I know that I have to generate a list of values for each month and join them.
  

  select add_months(to_date('01'||:P2_DATE_DEBUT, 'mm/yyyy'), level-1) dt from dual connect by level <= 12

  Could you please help me this?
  
  It's nice select I already have.
  

  SELECT 'f?p=&APP_ID.:2:&SESSION.:GET_DETAIL_REPORT:NO::P2_VALUE:' 
         || TO_CHAR(TRUNC(date1, 'MM'), 'MM') LINK, 
         To_CHAR(TRUNC(DATE1, 'MM'), 'MM/YYYY') valeur, 
         sum(valeur) "Cumul"
         FROM PL_MF_JOUR
  WHERE  cle = :P2_DEPT
  AND    DATE1
  BETWEEN to_date('01/01' || :P2_DATE_DEBUT || ' 00:00:00', 'DD/MM/YYYY HH24:MI:SS')
  AND     to_date('01/01' || :P2_DATE_DEBUT || ' 23:59:59', 'DD/MM/YYYY HH24:MI:SS') +364
  GROUP BY TRUNC(DATE1, 'MM')
  ORDER BY TRUNC(DATE1, 'MM')

  Kind regards
  
  Christian
  
  PS: your help is very appreciated every time, thank you.

  You need to generate your calendar of 12 months and then left outer join with it.

  Something like:

  WITH dts as (select to_date('01/'to_char(rownum,'fm99')||'/'||:P2_DATE_DEBUT,'DD/MM/YYYY') as dt
               from dual connect by rownum <= 12)
  SELECT 'f?p=&APP_ID.:2:&SESSION.:GET_DETAIL_REPORT:NO::P2_VALUE:'
         || TO_CHAR(dt, 'MM') LINK,
         TO_CHAR(dt, 'MM/YYYY') valeur,
         sum(valeur) "Cumul"
  FROM dts LEFT OUTER JOIN PL_MF_JOUR ON (dt = TRUNC(DATE1,'MM')
                                     AND cle = :P2_DEPT
                                     AND DATE1
                                     BETWEEN to_date('01/01' || :P2_DATE_DEBUT || ' 00:00:00', 'DD/MM/YYYY HH24:MI:SS')
                                     AND     to_date('01/01' || :P2_DATE_DEBUT || ' 23:59:59', 'DD/MM/YYYY HH24:MI:SS')+364
                                     )
  GROUP BY dt
  ORDER BY dt
  

  NB. Untested (obviously)

• Purge the Cache of the Table does not not as expected

  Hello gurus,
  We use OBIEE 10.1.3.3.1.
  We need to purge the cache Table.
  So I use the ODBC function:
  
  Call SAPurgeCacheByTable ('Database_name', 'Catalogue', 'Plan', 'Physical Table');
  
  so, when I run the present from invite cmd:
  nqcmd d AnalyticsWeb u username - password - Pali C:\OracleBI\Server\Bin\clear_cache.txt
  I received the message of successful result as below:
  
  [59118] SAPurgeCacheByTable operation succeeded!
  number of lines 1
  Processed requests 1
  
  But the thing is Local cache and web cache is not serving (.) TBL files)
  
  Please help solve this problem.
  
  Thank you
  Kanna

  Hello

  the problem is that OBIEE 10.1.3.4.0 ha a bug, see the support document SAPurgeCacheByTable and SAPurgeCacheByDatabase not working do not [787797.1 ID].

  The bug is logged as a Bug 6906535 and it resolved in the next version which is 11.1.

  Currently, there is no difficulty for 10.1.3.4.

  Support proposes to use SAPurgeAllCache() to work around the problem.

  I hope it helps.

  Kind regards
  Gianluca Ancarani

• Insert in the table does not

  My version of LV: 8.6 developer suite x 86

  Hi all

  It seems the "insert table" according to VI would not work when one or more entry points are empty.  Is there a way to get around this?  From a conceptual point of view, it's a very simple thing that I don't know how people OR might have missed it.  There must be a way around this problem. Any suggestion?

  Right click the Array function to build and select CONCATENATE entries option.

• line of the screen does not not on z2

  I found that one line of screen not responding liked, I checked with sketch application to detect this line and it is visible in the photo attached. I tried reset my Z2 phone but problem not solved. Could you please suggest the solution.

  Subject to Center.Hope of Sony Service they will fix it in time.

• Contents of the table does not align

  I set up a table of three columns to display captions and photos of products.  For some reason any alignment of the content in each cell is erratic. Some display a few pixels of higher than others in the line.  How can I fix it?  You can see the problem in http://www.kinggraphics.net/ronfisher.com/Accessories/AccViewAll.html

  Strange that we were served a white page with this incorrect url.

  In any case, to align it better, add this to your css:

  #mainContent table tr td {vertical-align: top}

  --

  E. Michael Brandt
  
  www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions
  
  www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia
  
  --
  

• When I delete an email the following does not automatically pop up more

  When deleting, next E-mail is always open. Now it just goes back to the e-mail page. Went in yahoo mail site and he always 'open next E-mail' check the option of choice. 25 just downloaded Firefox automatically a few days ago and that's when I started having the problem.

  I have already tried these things, also is gone in yahoo and changed settings options and restarted the computer. Nothing works, may yahoo email problem.

• try to install a game. directions to state that if the game does not automatically install for a right click on the cd/dvd driver icon and select "Explore" find file "default.hta.

  HE did exactly as the instructions said.  Double-click the file to launch the game.  is not the case.  I get a box that appears and indicates that windows closes the file because it has ceased to work with an error.

  any body can help me.  I have windows vista 32-bit.  a solution was to lower the load and to buy the program DriverCure.  Well I don't really have extra money right now.  is there another solution to this problem so that I can play my game.

  No, it's not the same game as the PSX one. It's an arcade of Oberon Media (shareware, available athttp://gamecenter.oberon-media.com/game.htm?code=111274487&RefId=&origin=pcat_gm_d). The version that you contains no *.hta file and play very well if you do not use "launcher.exe" of the game (which has a script, leading to an infinite loop error), but the 'treasures of the Deep.exe' instead. Any necessary compatibility setting. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")