Extender 360 w / Vista on a domain & to access the actions in the field

Similar Questions

• Family Vista premium will not allow access the USB on HP All in One Printer L7580.

  Other laptops using XPPro have no problem.

  I get the message when I try to access "HP Officejet Pro L7500 series ( \\HP0017a425d4e0\memory_card )

  Message

  "Z:\is not accessible.

  The handle is invalid. »

  Printer works as a printer. Printer is connected by Cat5 to the Linksys router.

  Laptop is wireless.

  In another physical location almost identical except that I have a new installed L7590 and access is allowed to the USB port. No portable Vista run Fine in both

  locations.

  Any ideas?

  Solution found

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Xbox 360 and Vista Media center (understand not found)

  I've looked everywhere I can think and have not been able to find an answer to this far (including the green button forums)

  After you run the transfer Assistant to move things to the Media Center and use as a desktop pc, the xbox 360 and Media Center cannot find the other and settings, I can see the xbox inside network but devices Media Center doesn't see it and I get the infamout (extender not found error).

  configuration is a wired connection via a belkin router, network configuration has not changed and the media center has been able to connect to the xbox previously, I tried several things so far

  -uninstalled onecarelive and disabled the firewall (one of the problems solved but are still unable to find the xbox)
  -reset the xbox to factory settings
  -check the firewall router so
  -installed all the updates that are known for pc and xbox including SP2

  Here's the event codes that I get when you try to configure the Extender, it shows correctly configured but yet I get the error not found "extender".

  * Information 2009-06-04 13:54:55 Mcx2Dvcs 400 none
  Windows Media Center Extender Setup successfully configured Windows Media Center PC for use with an Extender.*Information 2009-06-04 13:54:51 501 Mcx2Prov None
  Hersch began setup of Windows Media Center Extender with the following options: Firewall (0,0,1,1) Power management (0) media settings (1) * WARNING 2009-06-04 13:54:37 411 Mcx2Dvcs None
  Windows Media Center Extender Setup detected the following non-Windows Firewall: Windows Live OneCare Firewall

  disregard, I just fixed it... stopped the connection internet sharing service and was able to connect.

  for those who need to do this click on the Start button > right click on computer > click on manage the > on the left side of the window that opens click on services and applications > then select services > find the service "internet connection sharing" > right-click and select stop.

  some positions will tell to go to properties on the network connections page, but there was a tab sharing for mine

• Cannot add Windows Vista PC to Windows 2008 domain. Error message: an attempt to resolve the DNS of a domain controller in the domain being joined has failed...

  When you try to add a new computer Windows Vista (hqseven) to a Windows 2008 network, I get the following error message... "An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Ensure that this client is set to reach a DNS server that can resolve DNS names in the target domain. "Last year, I added two XP, a Windows 7 and another Vista box to the field.  I don't know why I can't add my new Windows Vista computer.

  I am able to get on the internet with the Vista PC. I can RDP to the domain controller (hqserver64) or any client. (using the name of host or static IP)  I can also do a ping of the domain controller (DC) or any another computer on my network using the host name.

  After initial search for information, I found the following error message when you do a nslookup from my new vista box.

  Nslookup mydomainname

  Server: hqserver64.mydomainname.net

  Address: 192.168.0.99

  hqserver64.mydomainname.NET cannot find mydomainname: Server failed.

  I do not understand why I suddenly get these error messages when I was able to reach this area in the past.

  Hello Stan Smith,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows 7 in adomain of work environment and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Computer Vista laptop was put-formatted at the factory (HP). The partition size is = ~ 300 GB, the file system size is = ~ 60GB. How to extend the fs of MBR to the size of the partition full?

  Don't know if the "diskpart" tool is available under vista.  Even if this is the case, it can't extend the system startup files.
  All ideas will be useful.  Thank you.

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  Read the tutorial above and the 'related links '.

  That will explain how it works under Vista.

  See you soon. Mick Murphy - Microsoft partner

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Firewall service Winows vista could not start in the field

  When I join my vista system in the field of state changes service not firewall system service can be started and can not RRAS and ping the system, but when I'm trying to change the system of working group and restart twice the service will work but bring the system back to the service area will run if I restart the system.

  If anyone has a permanent resolution please guide me.

  Thank you best regards &,.

  Elodie Mohan.

  Hello Mohan,

  Since you are on a domain, your Windows Vista is better suited for the IT Pro TechNet public. Please post your question in theTechnet Windows Vista Security Forum. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista will not start - stuck on the progress bar with MS logo

  Yesterday afternoon, my HP desktop PC would not initialize. The progress bar would be continually scroll down with MS logo, and it will never change. I tried unplugging all USB ports and running system recovery. This morning, the PC said something to the tune of «this machine could not be restored...» If you have recently made a hardware change try to return to your old configuration. If problems persist, please contact your administrator. »

  We had the machine for about 18 months with no problems at all. It is equipped with AMD processors and is running 32-bit Vista Home Premium. I currently have anti-virus protection of software and spyware. I don't think that the office came with a recovery CD. There is a restore disc but I don't know if that was consulted. I tried to boot normally and repair the command prompt startup files with no luck.

  I hope that we bought the extended warranty from Staples, but meanwhile information or suggestions would be greatly appreciated.

  Thank you

  lucasmartin,

  The Advanced Boot Options menu lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. Try the loads up in safe MODE , there may be some drivers that are corrupt or using last known good Configuration.

  For more information http://windowshelp.microsoft.com/Windows/en-US/Help/f9c50a72-04ec-4088-9fd4-a4f979eef5a71033.mspx#EAF

  Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

• When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

• Qosmio G35-650AV - Vista won't start, freezes and the fan is noisy

  Hello

  I installed sp1 vista winwows 4times on qosmio g35 and whenever I have this same problem, and I don't know how to fix it.

  The last time I did it:
  1 installed vista
  2 installed sp2
  3 insalled all the drivers in the order I found on thosiba support page.
  then evrythings worked well, I restarted laptop several times during the installation of the drivers and vista started every time.
  4. connect to the internet and installed 3 updates from windows update after restarting:
  5. I the first vista progress bar, then the screnn goes black, the hard drive light stops and works fan max.,

  earlier, I have no internet access the qosmio, but I installed the drivers in another order and have the same problem.

  Can U help me?

  /Adrian

  Post edited by: radian

  I can boot into safe mode
  BIOS is 3.9.

  If you need more information please write

  /Radian

  This strange s feels a bit like a hardware problem.
  What happens if you install the Toshiba Recovery disk system?
  Have you tried that? If not, please check it

• Vista will loop every time when the laptop is in powersave / sleep mode

  Hello

  new to the forum.

  My Vista goes into a loop whenever the PC goes in power saving mode.

  Someone at - it an idea on what is happening?

  Thank you!

  Hello

  I'm not quite sure what happened with your laptop, but maybe it s just a problem of software of m.
  Maybe it s just a confused BONE.
  Have you tried a fresh install of the OS?

  Before you define the laptop using the recovery disk, you should back up the data because the recovery disk formats the HARD drive.

  Welcome them

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• Spectrum x 360: what SD speed class card will be the spectrum 360 HP support?

  Hi all

  I want to buy a SD card 64 GB (Class 10 SDXC and UHS I or II), but I want to be sure, it corresponds to the speed class that supports the spectrum 360 (model 2016 skylake). The manuals do not specify it.

  Thank you.

  @Boeryepes Thanks for the reply,

  I found a third-party site where they did a test on X 360 computer laptop benchmark. Please find below the results of the tests.

  Toshiba Exceria Pro SDXC 64 GB UHS - II using as reference. SD reports a read rate of 80.8 MB/s and a write speed of 59.7 Mbps.

  Please use this link for more information: http://hp.care/2cFP8bd

  Let me know if it helps.

  Have a great day!

• Re: Satellite A200-1DY - Vista 64bits 2.60 Bios is the same as 2.50?

  Hello

  I have a strange problem in my Satellite A200-1DY, last Friday I tried to update my Bios.
  First of all, I had a problem, I couldn't update because it gives me an error:
  + Update error - 200 has no update + or something like that of error checking.

  Then I disabled in the winplash check option and everything works well, it seems like updating all blocks and finally the program restarted laptop but Bios still version 2.50 and it seems like nothing has changed. I didn't understand anything.

  I have Vista x 64 but my computer was installed Vista x 32, and the strangest thing is that if I try to update the Bios after that format whith laptop Toshiba cd recovery Vista x 32 everyting works fine and I have no problems.

  Hello

  Just a note; Satellite A200-1DY belongs to the series of PSAE3.

  The Toshiba page provides three different BIOS for this laptop.
  Currently, there is a BIOS 2.60 for Vista 32 bit and 64 bit and 5.6 for Win XP.

  Three BIOS versions are different, and if you use the Vista 32-bit, you must use the BIOS designed for Vista 32 bit.

  BIOS 2.5 is not the same as the BIOS 2.60 I think there is a difference

  However, as far as I know the 32 bit Vista was preinstalled on this A200 series and the recovery disk should also contains the Vista 32 bit.

  I put t know why the 2.5version is always visible on your A200 but I guess the BISO update has failed and may be related to the fact that the winplash check option has been disabled.