Family Vista premium will not allow access the USB on HP All in One Printer L7580.

Similar Questions

• Family Vista premium will not install error D 8002400

  tried to install the SP2 from windows update disabled all anti-virus etc.  Ran sfc/scannow. not always the same error.  What can I try next?  What is the consequence of not installing this SP I installed all the other updates.

  Hello

  The tool fixit in the following article should take care of your questionhttp://support.microsoft.com/default.aspx/kb/971058

  It may be useful

• Network of family Vista premium will not recognize a usb hd on linksys WRT610N router

  I have a Linksys WRT61oN router with a usb hard drive storage external. I can see the HD on the web page of the router but can not see the HD on the network drive.

  Hi kondakita,

  I recommend you contact the manufacturer of your router for assistance.

  http://homesupport.Cisco.com/en-us/wireless/LBC/WRT610N

  Hope the helps of information.

  Please post back and we do know.

• I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

  I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

  Depends on what you used for the backup.

  If you used the windows backup or another backup software will contain the entire disk will be a backup file, and view/use this file, you use the same software that allows you to save.

• Vista - computer will not start without the disc

  loaded vista on my computer - now computer will not start without the disc

  Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system.  Hope this helps someone else with the same prob.

• Win7 x 64 Media Center will not record unless the interface is open all of a sudden

  I use the Media Center to record TV on my Windows7 x 64 box with no problems until two weeks ago.  Then he stopped recording.  On further investigation I found it records when the Media Center window is open, but regular shows will not save if the window is closed.  I removed the media center did a restart and then reinstalled and the problem persists.

  Since no one was able to find an answer to this problem I restored the computer with a month of January, Image I created with Acronis True Image and all is well now.

  His shame that people at Microsoft could not find an answer.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• "Scan to computer" is not turn on Photosmart HP 6510 e-all-in-one printer B211a

  New user on that and I would be grateful for all the help I can get. I recently bought for the 6510 HP Photosmart e-all-in-one printer B211a to use with my Ipad 2. I've set up correctly, or so I think, I can print and copy, but I can not seem to be able to analyze anything send it to the Ipad 2. It says 'none found computer. ' I do not use the software to install and configure it up to the Ipad 2. How can I make the printer identify my Ipad 2, so I can scan? Help, please! Thanks in advance.

  Hello

  The front of the product allow you to scan to computers with the complete software installed only, such a feature not planned mobile operating systems.

  To scan from iOS, you can use the HP ePrint home & Biz, on the App Store application available.

  Then you can analyze by launching the application analysis.

  Kind regards

  Shlomi

• The jet office 4315 all-in-one: printer plug on the Tablet?

  I have an apex Tablet and I would like to know if there is a way to connect my all in one printer for her so I can print from my tablet, I have a cord to hang them together but I'm assuming that could print from the tablet should I make the tablet to recognize the printer & I don't know how to do this. I used to use it with my desktop computer

  Hello

  Only a connected network printers are supported on a Tablet, the 4315 is a single USB printer and it is not supported by such a.

  Kind regards

  Shlomi

• How to get the Dell 944 Photo all-in-one printer driver to work

  I just bought the Inspiron 580 and am trying to use my existing printer (Dell Photo All in One 944) how to download correct driver for the printer to work with the new computer?

  S Pipkens,

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (utility cleaning printer) untip it prompts you to restart your computer.

  Restart your computer. Make sure that the printer has been deleted. Driver Manual printer removal

  Download and install the proper drivers from...

  Reference Dell 944 all-in-One Printer owners thread (W7) (Patch is also located here)

  Firewalls and anti-virus programs will block communications.

  Rick

• HP Officejet 7310xi all in one: the HP Officejet 7310xi all-in-One Printer-t - y at - it a hard drive?

  The all-in-one printer HP Officejet 7310xi contains a hard drive?   So if, for the purposes of recycling how to remove or disable otherwise?  Thank you.

  There is no hard drive in the Officejet 7310xi.  Verify that no memory card is inserted in the memory locations in the lower right front side of the machine.

• is the 7510 HP e-all in one printer compatible with bluetooth items series?

  Can you send pictures from a mobile phone with bluetooth capability to a HP e - ALL IN ONE printer series 7510?

  Hello

  Your phone uses the different operating system, unfortunately I can't find it in this list:

  http://WWW8.HP.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.HTML?app=TCM:245 - 1044333 & platform = tcm:245 - 1044335

  But you can always send from your phone to your printer.

  Kind regards.

• Consider the purchase of C8180 All in One Printer...

  Aloha!

  I'm considering buying a HP C8180 All in One Printer and need to know if HP or Windows 7 drivers/software, for all the features...

  If you want to connect only this your touchsmart, wireless printer, it is possible. However if you want the touchsmart to connect to the Internet using the wireless router, it is recommended to connect the printer also to the router to use the printer and the router.

  For step by step to connect the printer directly, go to the section "Setting up the ad hoc wireless network" Page 36 of the Manual:

  http://h10032.www1.HP.com/CTG/manual/c01178488.PDF

  For based router configuration, go to the Page 32 of the manual even.

• VISTA no longer STARTS after power failure, FAILURE of KEYBOARD will not allow access to the Start Menu.

  I have a Dell E521 of Dimensions with Vista Home Premium. The power went out yesterday, and when I turned on the PC it States "keyboard disabled", also the mouse isn't here. The PC will be even in the menu start and without keyboard F2. F12 or F8 does not work,

  Anyone have an idea how I can fix this?

  Thank you

  Stu

  You have a list of posts on this problem in these Forums,

  Please post a question in a Thread in a Forum on an issue, unless otherwise stated.

  http://social.answers.microsoft.com/Profile/en-US/?user=spopielarski&referrer=http%3a%2f%2fsocial.answers.microsoft.com%2fForums%2fen-US%2fvistaperformance%2fthread%2f8e1d3a04-3956-406a-aa99-c8c38af783d9&rh=DSa9M9P3hh2NDzkg2No8QwS2DYUcoaAQtstbnhVVjwY%3d&sp=forums

  Link above contains a list of your messages on these Forums.

  You also posted this in repair of Vista and recovery Forum, which is the appropriate Forum for your question.

  They will help.

  Mick Murphy - Microsoft partner

• Problems with Mechwarrior 4: Vengeance on Vista. Will not play past the launch command

  I loaded Mechwarrior 4: Vengeance on my laptop. I have Vista Home Premium, 32-bit system. The game installs fine, and it will start well so. The question is when I hit the Start button to start the game. The loading screen appears for a split second, and then the program quits and I get the following error message:

  STOP: Invalid Allocation, 0 bytes
  all ideas can be what is the problem? Thank you

  Chaos37,
  OK, I did some research and found that this can be caused by several different things.  Here will be a list of questions to information that can help us diagnose your problem.  Then, I will list some things to try.

  This game has never run on this PC?
  What are the specifications of your system (brand, model, CPU, RAM, etc...)?
  What kind of mouse you use (wireless, wired, touchpad integrated, etc...)?
  Have you updated any drivers lately?

  Things to try:
  Update your driver to map his and your video card driver.
  If you are able to access the game options, turn off any hardware acceleration for the sound.
  If you use a wireless mouse or you have any type of attached block, then unplug it and test it with a wired mouse.

  Tell us the requested information and the results of these steps.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.