Extension Manager no longer work after the update CC 2015

Similar Questions

• Applications no longer work after the update of the game store!

  In my Xperia SP applications do not work after the update from the game store and shows 15 times in one minute, unfortunately "Skype/social life/mcafee/chrome, etc." has stopped working while triying to open it. This problem is started, because I updated my phone in 4.3 jelly bean.

  My phone is ok now...

  I contacted the sony Xperia care and suggested a repair.

  And after repairing its great and works without a problem...

  The solution is here...

  Dear Mr. Jab,

  Greetings from support Sony Xperia.

  We sincerely regret the inconvenience.

  We appreciate the importance of your concerns and we are here for you help.
  In response to the request of ypur, we would like to inform to run the reapair software.

  The enforcement procedure to repair your Windows computers using software and application of PC Companion:

  Note! You should always back up all data before you perform a repair of software.

  1. Download PC Companion to sony and install it on your Windows computer.
  2. Turn off the phone and disconnect the computer.
  3. Open the PC Companion application.
  4. Select start under the support area.
  5. Select the software update feature, and then start.
  6. Not found phone is displayed. Select phone repair and Connect.
  7. You will receive a message on PC companion, that data will be lost if you continue.
  8. Check the box to confirm that you have understood that all personal data will be lost. And then click Next. The application prepares the update and if necessary necessary downloads data on the web.
  9. Select your phone model manually, and then click Next.
  10. Depending on the model chosen, you will need to perform a few steps for the update for PC Companion be able to update the phone software.
  11. Yet, do not plug the phone! Note! At this point, the phone must be turned off and disconnected from the computer.
  12. Connect the USB cable to the computer, not on the phone.

  13.Xperia: then just pressed the button indicated, connect the USB cable for device theXperia and keep holding and pressing the indicated key until your device update started... appears (in some cases installation drivers appears first).

  1. If you have not correctly, do the phone turns on and proceed to the next steps, drag the bottom of the convening of the notification bar.
  2. In this case, disconnect the phone from the cable, turn it off and repeat step 12.
  3. Follow the instructions on the screen. Once the repair is completed, unplug the unit and then restart the device.
  4. Click on Next. If the repair was successful, the message this device has been updated successfully is displayed.
  5. Click Finish.

  Please contact the Support of Sony Xperia.

  Looking to better serve you.

  Kind regards.

• Office shortcuts that open web sites no longer work after the update

  After the last MS update for office my desktop shortcut icons that go to Web sites do not work... they open MS FrontPage? The shortcuts that installed programs work very well... only those who are open to something on the internet are affected and open the front cover.  I did a system restore and the shortcuts work now but I can't install updates.  What happened twice with the two latest Office updates... I have office 2010.  Updates did not affect my laptop that has the same programs installed, just my counter top.

  Thank you... problem fixed... Here's what happened... After reading your instructions, I realized that http, https and ftp even not included in ther Protocol extensions below or anywhere?  After some research, I learned that this can occur after you uninstall Chrome that I recently did, did not chrome at all... so I put IE as default browser and these three extensions have emerged then I reset the Firefox browser... the problem is solved... these 3 extensions were not in the protocols causing my Office to open in first page shortcuts... Thank you very much

• Free online games game no longer work after the update to IE9

  only opens... worked b4 I've updated for IE9

  Hi l577060,

  ·         What happens when you try to open the games online?

  ·         You receive an error message/code?

  ·         The problem occurs with all Web sites or this particular Web site?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Follow the article provided to enable compatibility view in internet explore.

  http://support.Microsoft.com/kb/967897

  Step 2: Java update and the latest version of flash player.

  http://get.Adobe.com/flashplayer/

  http://Java.com/en/download/index.jsp

• 277dw MFP: MFP M277 Duplex is no longer working after the update of 15245

  I installed the last update of the HP Support Assistant said I needed.  Installation only is not as easily as the prerequisites installs and software seemed to have lost the ability to do automatic duplexing, which worked before.  He invites me to turn the paper and the "Print on Both Sides" now says "(manually).

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• The extensions Manager no longer works

  HI -.

  While my extensions always seem to be available in Dreamweaver CS4, the extensions Manager no longer works. He started, but no window never appears. This is the case if I get into Dreamweaver, run it independently or click on an extension, I like to get updated. I would appreciate any information on what can cause this problem and how it can be solved.

  I tried to uninstall the extensions with the uninstaller application manager, but the box for the extensions Manager is gray and I can't select it. If I click on select all and then uncheck the apps that I don't want to touch, the extension manager is also deselected. The only way to keep selected is if I leave also Fireworks, Illustrator, and InDesign selected. But all these applications uninstalling seems to be a radical alternative. If I trash manually the extensions Manager, I can't select it in the CS4 Installer. No doubt that I have to uninstall the other three applications and reinstall them in the same time, I have reinstall the extensions Manager. There is obviously some dependencies between these four apps, but uninstalling and reinstalling all are a lot of work to get to a solution that may not even work.

  Thank you very much.  He was in fact not the .plist file which has been mentioned here, but what I found, it was two folders more deep adobe/Extension Manager2 / exman_uiPreferences.xml who had the position of extension manager -950 and when I changed this line of XML to a positive number, my extension manager then open on my main screen again.  Thank you for your help.  The extension manager should be closed until the change is made to the XML file that I found out he's going to rewrite the file with the old numbers, if it is already open when you close it.

  Rich

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

  the power button of my hp dv6 7204se envy key do not work after the update of windows 10

  any help on this please?

  .

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• After the update (December 2015), Camera Raw does not fit on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  After the update (December 2015), Camera Raw does not on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  Yes, this is the same bug.

  The engineering team working on it.

  We have no fixed timeline.

  In the meantime, you can restore the previous update.

• The Styles of bindings are no longer works after the new update. (2015.1)

  The Styles of bindings are no longer works after update of the MUSE 2015.1.

  Hello, would you be able to send your Muse file so that we can investigate more? When I tried to reproduce the problem, I am not able to see it with a whole new file of Muse.

  Please send your application to [email protected], with "attn:Jason" in the subject line and a link to this forum topic. If it is greater than about 20 MB, please use a sharing as Dropbox service.

• Acer ES1 - 511 Touchpad stopped working after the update to the latest version of windows.

  I just updated my Acer laptop ES1-511 (8.1 Win x 64) and my touchpad no longer works after a reboot.

  I went on the site driver of Acer and reloaded the driver Elantech, restarted and the same problem.

  I have went on the site Acer driver and reloaded the e/s Intel driver chipset, rebooted and reloaded the driver Elantech.

  Always without success.

  Help. Laptop is limited without touchpad utility.

  Go to the download site Acer for ES1-511 and get Intel i/o Drivers and reinstall it.
  us.Acer.com/ac/en/US/content/drivers/5345;-; Aspire 20ES1-511%
  Be sure to select Win8.1 64-bit as OS.

• RDP does not work after the update of the virtual machine tool

  There are many machines these RDP does not work after last update VM tool.

  Hello

  Please replace RDP linked DLL file from any server to work from the same version of the OS...

• Third party contact form widget no longer works with the update - PHP errors

  PHP seems to be even more screwed up with the last update/upgrade to Muse.  The previous update has started producing the following error message when I transferred my site via FTP:

  'Impossible 1 WARNING - connection to a PHP file. Failed to check if the web server supports PHP required by forms of the Muse. Remember the domain name entered in the dialog FTP download is correct. »

  However, everything worked, and by participating in some queries here, it seemed like a curiosity about something serious (stuff still worked but an error message popped up for no discernable reason)

  Since the last update, however, widgets that I have two different companies for the purpose of emailing me through the Web site, send messages, etc., are no longer works and the following message appears to hit 'submit '.

  "PHP script form is missing from web server or PHP is not properly configured on your web hosting provider. Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP. »

  
  

  By checking with my web host, I was told

  « le page seems to use the script form - u31652.php that exists on the

  Server.

  Unfortunately, this error is not accurate enough to guide us in the right

  direction. PHP works on the server. However, looking at the

  Apache error logs web server I see the contact form appears to be

  looking for a file that does not exist.

  
  

  Just shoot this question, you want to work with Muse to determine

  Why coding sites is looking for the file

  / usr/home/NAME/public_html / WEBSITE.com/null ."

  
  

  Any ideas what this means and how to fix it would be great. I tried to re - download the whole site, thinking that maybe something was not being downloaded via "Only changed" but it is always the case

  
  

  Thank you!
  

  
  

  Please install the last update and check the configuration of PHP on your host for verification and then to test the workflow.

  Thank you

  Sanjit

• Why can I access Indesign is no longer after the update until 2015?

  I am currently charged monthly for a single application, Indesign, and today I've updated to version 2015 and now can't access the program. My account shows no more than my subscription and asks me to sign up again. I was just billed August 21, 2015 and using the program yesterday. After the updated 2015 I seem to have lost my access and membership. I don't wan to register again and be doubly charged monthly.

  I checked my account information. Sent to adobe a note on Facebook after going round in circles trying to get help from cat, who does not see to exist today (tried it on several browsers)

  I'm on an iMAC with Yosemite.

  Hello

  You can refer to the instructions in the links below:

  Connect and disconnect activate Cloud Creative applications

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Activation and deactivation of troubleshooting

  Creating cloud connection errors

  Let us know if that helps.

  Kind regards

  Bani