Acer ES1 - 511 Touchpad stopped working after the update to the latest version of windows.

Similar Questions

• Satellite U400: touchpad stopped working after Vista update

  Hello

  My Touchpad U400 cannot work after the upgrade, (under the Vsita system).
  I tried so many ways to solve, but still does not
  Did someone get hurt it?

  I tried to get into the BIOS to enable
  And also tried to download my touchpad driver (but I can find it)
  BTW, Fn + F9 does not work as well

  Please help me solve this problem

  Thank you very much

  > And also tried to download my touchpad driver (but I can find it)

  The touchpad driver is placed on the page of the European driver Toshiba
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, one must choose the right laptop model (see the bottom of the unit model number)
  Then choose the operating system and the touchpad driver should appear.

  PS: there are two touchpad drivers listed on the page; Synaptics and Alps Electric
  Both must be installed!

• DNS stopped working after the latest Vista updates

  Yesterday my Vista Home Premium has been updated by Microsoft through the automatic update process. After the update and reboot network stopped working. I was able to trace this DNS no longer works. I was unable to solve the problem until I supported updates, after which the system returns to normal operation.

  Now, of course, updates want to be reinstalled, but I don't want the network to fail again. Any ideas?

  Change how to get updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

  Right click on those you don't need > UAC prompt > it hide.

  Never install party hardware driver updates 3rd through Windows updates.

  Go to the manufacturer's website, instead.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  See you soon.

  Mick Murphy - Microsoft partner

• WordPad has stopped working after the latest updates

  After that received several updates this morning, Word Pad stop working. When I open it, I get an error message saying... "unable to create the new document.

  Can someone tell me how to solve this problem? It was working fine just before the updates.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone your event to your OneDrive Viewer Application copies of your System and logs and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• My guest user account has stopped working after the installation of several windows and IE9 updates.

  I recently installed several windows and IE9 updates. During the install IE9 I stopped the installation process, because it seemed that I had two IE9 installs go. I ended up cancelling the installation so IE9 has not installed. I tried to install IE9 again and this time I can't stop installation, and it has been successful. I checked the other user profiles to make sure that everything has been installed, and that's when I noticed that my guest account wasn't just all users accounts were working well.

  Whenever I try to open a program, for example: Internet explore, any Office program and even the calculator another window opens asking me to manually locate the file I'm looking for. I am able to locate the file and open it, but as soon as I close I can't reopen unless I have to manually search for the file. There is a checkbox indicating that it automatically uses this file with the program but I can't check the box (its in a light gray that I can't click on) and I don't want to manually search the file everytime I open a program. I tried using a restore point before updates, but which did not set can guest account everyone please help?

  [1] I need to correct me by declaring that the Mcafee subscription is 18 months and its due for renewal in June, then yes its still the preinstalled version.

  [2] will certainly be your advice on that. Should what drivers I roll back?

  [3] I thought to go on this forum first, but I chose it because the error occurred while I was updating, but I'll post my question it too

  A1A. Ah! The application is named McAfee Security Center by chance?

  A1B. Do you plan to purchase a subscription for this or any other McAfee application (which you would need to do so BEFORE the expiry of 18 months 'advance')?

  A2. In re the restore drivers, you restore the drivers that you have installed via Windows Update. that is, Intel G45/G43 Express Chipset (graphics driver or screen) and Realtek PCIe GBE Family Controller (NIC driver). Again, this is a long shot.

  A3. Please do that start new thread immediately.

• My email stopped working after the new version of Thunderbird (V31.5.0) has been pushed to my computer this weekend.

  This weekend, Thunbderbird V31.5 has been installed and my email client will be is more connected to gmail. Nothing has changed with my gmail account. It looks like something in the Thunderbird configuration changed at the origin of this problem.

  Thunderbird, troubleshooting info shows...
  Outgoing server ID incoming servers
  account1 (pop3) pop.gmail.com:995 SSL/TLS Normal password smtp.gmail.com:465 SSL/TLS Normal passes true

  I'm tempted to uninstall and reinstall but don't know how to save/backup/protect all of my old emails and history.

  Check your firewall settings, because it can block Thunderbird.

  Example: I use Norton Anti-anti-virus/firewall.
  Sometimes, after an update, Norton still thinks it can afford than the previous version.

  • I then close Thunderbird and go to Norton.
  • Settings > network > Smart Firewall > program rules
  • Locate the Thunderbird and set to "allow".
  • On one occasion, I had to block, ok then reset allow.

  If you are using another firewall/antivirus program, then there will be similar parameters. In order to check this first.

• simple AppleScript has stopped working with the latest version of numbers

  Hello

  I have a simple AppleScript that converts marked cells in number of "-" to "+". Now with the new version of numbers (3.6.1) Applescript only converts the first cells and ignores the other marked cells.

  I'd appreciate it if someone could have a look?

  Thanks in advance!

  on run {input, parameters}
  
    --select cells, run; converts positive numbers to negative; and vice versa
  
    tell application "Numbers" to tell the front document to tell active sheet to tell (first table whose class of selection range is range)
         tell the selection range to repeat with i from 1 to count cells
              tell cell i    
                   try     
  
                        set its value to (its value) * -1          
  
                   end try         
              end tell    
         end repeat
    end tell
    --end of script
  
    return input
  end run
  

  Hello

  Because the selection changes when the script change the value of the first cell, numbers select this cell.

  Use the get, like this:

  say (get selection range) to repeat with i from 1 to count cells

• Satellite L855 and Win8.1 - Touchpad stops working after the login window

  New laptop running windows 8.1 Touchpad works for about 30 seconds after windows starts and then stops. I have tried downloading drivers the most recent of the Toshiba site, but it does not solve the problem. Tried the function keys of the touchpad, but it's not the question. Called Toshiba support and they suggest to send it in for a factory reset.

  I have also a problem with AMD graphics will split after that computer screen goes into sleep state. Downloaded and installed drivers more recent for it on the advice of Tech support, but not fixed, or the other.

  I'm a little worried because a research shows these two problems are not uncommon and IV ' e spent a lot of time to copy data and install the software, don't want to lose him and wasting time waiting for factory reset if I need to return ot.

  Anyone have any ideas?

  Factory reset is the best way to solve this problem, but you have upgraded your machine following the instructions step by step http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• Satellite L350D-118 Vista stops working after the error to install Windows XP

  I have a L350D - 118 (PSLE8E) bought 2 weeks ago and is installed in Dutch.
  My plan was to make it dual boot with Windows XP Professional.

  I resized C: partition using the Vista Disk Manager to make more room for the XP partition.
  I then tried to create a new primary partition, but I only could make an extended partition (so I did not).

  Then I put in my teacher XP + SP2 installation CD in the disc drive to see if I could install XP on a new partition to be created using the installation program itself. But the XP installation program fails before the installation starts with a message that an error has occurred and not further so that he could cause damage (the bottom line: stop: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000).)

  When I rebooted, Vista has not loaded, but there is only a flashing cursor in the upper left corner of the screen. X (there is that no message as not found operating system, or something like that.
  When I press on and/or press and hold F8 while loading the Bios, the same thing.
  The laptop is also transformed the immediately after pressing the power on button, instead of having to wait 4 seconds.

  Then I inserted the DVD of Vista Premium x 32 I have from my PC. This displays a message, press any key to boot from the CD/DVD... If I press a key, there is a bar "loading files" style back and after a loading bar Vista-style. After that, it still displays a flashing cursor in the upper left corner of the screen.
  When I retried with pressing F8 and select last known good configuration, it blocks the same way.
  When I retried with safe mode, the screen freezes after Loaded: \windows\system32\drivers\disk.sys

  I also tried the Windows XP edition family, and Windows XP Edition - family + SP2, but all abandoned and gave the same error message.

  I tried to start with the prompt with a CD of Windows 98 SE. It works, but it can not find the drivers for the DVD-disc drive and since W98 doesn't support NTFS I don't see what is on the C: partition. :-(

  I did a recovery DVD because it is already on the D: partition and I do not plan on using Vista.
  There was also a non dos partition of 1.5 GB at the beginning of your hard drive. This is mentioned in the guide of the 3-8 regarding the system recovery options.

  Is there another way to take a look at the C:-partiton or get HARD drive recovery tool work?

  If you say that the [http://backupmedia.toshiba.eu] Toshiba Recovery DVD, how did you it will work. ?:|

  Thanks for any advice.

  Hello

  I must say that your ad is very interesting and dual boot is a topic where people can write about experiences.
  Last month, I did my own experiences and want to share with you.
  At first, I must say that your ad is a little confusing. Let's start with General things.

  Dual boot (installation of two BONES) is without any doubt, and I see no problem here.
  It is just important to have two partitions on the HARD disk. If you have preinstalled in C that you want to use in the future or create one with disk manager or just start the installation of the OS and the Windows installation to create the second partition.

  If your laptop has two hard disks, you can also install the second partition on the first partition, which belongs to the second HARD drive.

  With short words, all options are open and it's just important to know what you want to do exactly. If I understand you right, you cannot boot OS preinstalled.

  The problem is that after having playing with partitions, you will not be able to use the saved on the HARD drive recovery image. This score from GB 1.5 has nothing to do with the recovery image, and it is characteristic of Vista. If everything is OK, you can enter if you F * to start and choose the first option called fix my computer.

  You can see this option after using F8 at startup?

  I really don't understand why you have this error message when you start installation of WXP. What you can do is to set the default BIOS settings and try again.

  If you order the Toshiba Recovery DVD, you will be able to reinstall the OS and have once again the factory settings. Maybe you should buy it. OK, it costs about 40 Euros, but this isn't a bad idea to have the original recovery DVD. Perhaps one day you want to use Vista or you want to sell your laptop. It's good if you can also offer original recovery with her media.

  Sorry if I forgot to comment on something in your ad. If you have any questions please let me know.

  Good luck!

• Why Acrobat Connect Pro years take to start after the latest version of Windows update?

  I've just updated Microsoft windows 7 (and I don't want to lose the programs I and microsoft does not guarantee that they will be stick around including xp mode by going to windows 10 and it is part of the problem) and my college of adobe connect program charges years now. Do we know why? I spoke to the College, and they plan to get rid of adobe connect. It's really frustrating.

  I like also all pop ups trying to prevent me from setting this up. Why can't work without all the stuff extra IS NOT nneded?

  Hi John,.

  Thanks for posting your query in Microsoft Community.

  I suggest that you put the computer in a clean boot state and check the status.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Canon mp530 printer/scanner does not work since the latest version of windows update

  from the windows of the last update my printer scanner does not work. He says I have no installed printer. even if its there in my device list. Ive spoke at length with Canon support and they are sure it's a matter of windows.

  any ideas?

  Hello

  After windows update did you check in Device Manager is there any yellow mark on any driver?

  Go to the device by right clicking on computer Manager and manage

  Right click on the yellow camera brand > properties > details > click on description of the device > select hardware ID

  Let windows to be opened and take note of the VEN ID and DEV ID

  Go to the browser and go to Pcidatabase and put the VEN ID and see who exactly the driver required

  Look for the driver at Google or bing or other for a good

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

  My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

  NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

  olou,

  If the suggestion on possible recording by Larry fails, see this page

  https://www.Adobe.com/account/my-products-services.html

  I'll try to ask a personal forum friend who knows what to do.

  For download, read this

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  and update, see

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh