Office shortcuts that open web sites no longer work after the update

Similar Questions

• Applications no longer work after the update of the game store!

  In my Xperia SP applications do not work after the update from the game store and shows 15 times in one minute, unfortunately "Skype/social life/mcafee/chrome, etc." has stopped working while triying to open it. This problem is started, because I updated my phone in 4.3 jelly bean.

  My phone is ok now...

  I contacted the sony Xperia care and suggested a repair.

  And after repairing its great and works without a problem...

  The solution is here...

  Dear Mr. Jab,

  Greetings from support Sony Xperia.

  We sincerely regret the inconvenience.

  We appreciate the importance of your concerns and we are here for you help.
  In response to the request of ypur, we would like to inform to run the reapair software.

  The enforcement procedure to repair your Windows computers using software and application of PC Companion:

  Note! You should always back up all data before you perform a repair of software.

  1. Download PC Companion to sony and install it on your Windows computer.
  2. Turn off the phone and disconnect the computer.
  3. Open the PC Companion application.
  4. Select start under the support area.
  5. Select the software update feature, and then start.
  6. Not found phone is displayed. Select phone repair and Connect.
  7. You will receive a message on PC companion, that data will be lost if you continue.
  8. Check the box to confirm that you have understood that all personal data will be lost. And then click Next. The application prepares the update and if necessary necessary downloads data on the web.
  9. Select your phone model manually, and then click Next.
  10. Depending on the model chosen, you will need to perform a few steps for the update for PC Companion be able to update the phone software.
  11. Yet, do not plug the phone! Note! At this point, the phone must be turned off and disconnected from the computer.
  12. Connect the USB cable to the computer, not on the phone.

  13.Xperia: then just pressed the button indicated, connect the USB cable for device theXperia and keep holding and pressing the indicated key until your device update started... appears (in some cases installation drivers appears first).

  1. If you have not correctly, do the phone turns on and proceed to the next steps, drag the bottom of the convening of the notification bar.
  2. In this case, disconnect the phone from the cable, turn it off and repeat step 12.
  3. Follow the instructions on the screen. Once the repair is completed, unplug the unit and then restart the device.
  4. Click on Next. If the repair was successful, the message this device has been updated successfully is displayed.
  5. Click Finish.

  Please contact the Support of Sony Xperia.

  Looking to better serve you.

  Kind regards.

• Existing Web site no longer works after installing OSX Server

  I have a site on my mac mini, who resides in/Library/WebServer.  It has Perl cgi pages, images, css, Javascript files.

  I installed Mac server I can use the mac-mini as a place to for Time Machine on my laptop to save on via wifi.  Now the Web page has moved and has a different configuration, I can't understand. Before I had a directory/Library/WebServer with Documents to subdirectories, CGI-Executables, Lib, pictures and models. Now it seems that the html files live in/Library/Server/Web/Data/Sites/Default, and I have no idea where the other files to go.  Apache does not work either.  Disable the sites option just disables the address of the Web site completely.  Enter http://localhost just gives an error message saying that Internet sites is disabled.

  I didn't change my site, I just wanted the time-Machine capabilies.  I put a lot of work in my site and I would like to recover my TI.

  Not a good situation, unfortunately.    You are either going to learn how OS X Server, or you want to remove OS X Server and perhaps acquire a Time Capsule.  (Ac-class AirPort Wi-Fi devices are also supported on Time Machine.)

  OS X Server expects local DNS to be put in place, you may not use DNS ISP, if you are on a NAT device would have network - and OS X Server expects that you will place your files in the localities of/Library/Server/Web/Data/Sites, or whatever the directory on your web site is stored in a site within the.app.

  In both cases, you will need make your website readable _www.

• Extension Manager no longer work after the update CC 2015

  Anyone else having this problem?

  After update the CC until 2015, the extension manager is empty and does not list any Adobe applications.

  Trying to double-click an extension gives notice that no apps are installed.

  On a Macbook Pro running Yosemite.

  the extension manager is no longer supported by adobe, Adobe Exchange:

  We wanted to let you know that our plans now in order to have time to use alternatives to the handler extensions, described below. The extension manager will continue to be available as a free web download in different versions with various creative office application compatibility up to 2014 CC version . In addition, the final version of the CC extensions Manager will be available through the creative application of Cloud in the foreseeable future.

  Options of & next steps

  If you are a developer or a producer of Adobe Exchange, the following options are available:

  • You can distribute your products through the Adobe add-ons Web site. Add - ons can be distributed to the public (free or paid) or private (free for named users), learn more about the products of sharing private
  • If you want to continue to sell through your own Web sites or through other channels extensions, you can build your own installer or provide instructions to your users to use the command line functionality extensions Manager to install your extension. The extensions Manager command line tool is available for download at the following links:
    • Windows
    • Mac

  If you are a user, the following options are available:

  • Acquire extensions, plug-ins and other content using the Adobe add-ons Web site.
  • Contact the developer of your extension and ask that he or she creates an installer for it.
  • Users and businesses that are unable to use creative application Cloud or Adobe modules can use the extensions Manager command line tool , install and remove your extensions. The command-line tool has been updated to support the next major release of the creative cloud, v. 2.1.1.110.

• Free online games game no longer work after the update to IE9

  only opens... worked b4 I've updated for IE9

  Hi l577060,

  ·         What happens when you try to open the games online?

  ·         You receive an error message/code?

  ·         The problem occurs with all Web sites or this particular Web site?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Follow the article provided to enable compatibility view in internet explore.

  http://support.Microsoft.com/kb/967897

  Step 2: Java update and the latest version of flash player.

  http://get.Adobe.com/flashplayer/

  http://Java.com/en/download/index.jsp

• 277dw MFP: MFP M277 Duplex is no longer working after the update of 15245

  I installed the last update of the HP Support Assistant said I needed.  Installation only is not as easily as the prerequisites installs and software seemed to have lost the ability to do automatic duplexing, which worked before.  He invites me to turn the paper and the "Print on Both Sides" now says "(manually).

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• Third party contact form widget no longer works with the update - PHP errors

  PHP seems to be even more screwed up with the last update/upgrade to Muse.  The previous update has started producing the following error message when I transferred my site via FTP:

  'Impossible 1 WARNING - connection to a PHP file. Failed to check if the web server supports PHP required by forms of the Muse. Remember the domain name entered in the dialog FTP download is correct. »

  However, everything worked, and by participating in some queries here, it seemed like a curiosity about something serious (stuff still worked but an error message popped up for no discernable reason)

  Since the last update, however, widgets that I have two different companies for the purpose of emailing me through the Web site, send messages, etc., are no longer works and the following message appears to hit 'submit '.

  "PHP script form is missing from web server or PHP is not properly configured on your web hosting provider. Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP. »

  
  

  By checking with my web host, I was told

  « le page seems to use the script form - u31652.php that exists on the

  Server.

  Unfortunately, this error is not accurate enough to guide us in the right

  direction. PHP works on the server. However, looking at the

  Apache error logs web server I see the contact form appears to be

  looking for a file that does not exist.

  
  

  Just shoot this question, you want to work with Muse to determine

  Why coding sites is looking for the file

  / usr/home/NAME/public_html / WEBSITE.com/null ."

  
  

  Any ideas what this means and how to fix it would be great. I tried to re - download the whole site, thinking that maybe something was not being downloaded via "Only changed" but it is always the case

  
  

  Thank you!
  

  
  

  Please install the last update and check the configuration of PHP on your host for verification and then to test the workflow.

  Thank you

  Sanjit

• The Styles of bindings are no longer works after the new update. (2015.1)

  The Styles of bindings are no longer works after update of the MUSE 2015.1.

  Hello, would you be able to send your Muse file so that we can investigate more? When I tried to reproduce the problem, I am not able to see it with a whole new file of Muse.

  Please send your application to [email protected], with "attn:Jason" in the subject line and a link to this forum topic. If it is greater than about 20 MB, please use a sharing as Dropbox service.

• Firefox extremely slow, not open web sites correctly. Especially in the last 24 hours.

  In the last 24 hours (from April 27), FF4.0 became incredibly slow, unable to open many sites completely or correctly (i.e., BBC NEWS, Twitter) or the opening of sites but not able to use fully (i.e. opens hotmail but did not open any new messages). This is not the case with Chrome or I.e. browsers seems to be specific FF.

  This is probably due to the WangWang (ww-plugin), you have installed. Disable it in Tools | Add ons | Plugins and then see troubleshooting issues with plugins like Flash or Java to solve problems of Firefox for instructions on how to uninstall it.

  Please also go to the Plugins check page and see if the version of Flash you have installed currently needs to be updated or not. I don't recognize the version you have installed.

  If the problem persists after the above troubleshooting steps, please try running Firefox in questions to troubleshoot Firefox in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

• Google and other Web sites does not work after installing Bitdefender Internet Security.

  After that installation of the version of Bitdefender Internet Security offered to the 60-second-anti-virus plugin for Firefox of Bitdefender, a number of sites have stopped working. First of all, I cannot change my homepage, because the connection hangs, and Web site does not open. In addition, tries to connect to a number of Web sites (Google, Youtube, Yahoo, DuckDuckGo, etc.) created this site:
  "Secure connection failed".

  An error occurred when connecting to www.google.com. The server has rejected the transfer protocol because the customer to a lower version of TLS on the server supports. (Error code: ssl_error_inappropriate_fallback_alert)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem."
  

  In short, a lot of great websites do not work and are seriously harming my ability to work. Bing works as a site search engine that I can go to, but not as a home page. I desperately need help with this problem...

  Hi pokator, can you try disabling ssl scanning in bitdefender options and see if that makes a difference?
  http://www.BitDefender.com/support/what-to-do-when-security-certificates-cannot-be-verified-installed-1090.html

• The Panel and the desktop shortcuts no longer work after the virus

  Originla title: shortcuts does not.

  The Panel and the desktop shortcuts no longer work!  I had other users on my computer and maybe a user to a virus?  I can open programs, but must do so by opening a file written by the program (for example, to open a Word file to get term; to open TaxCut to Taxcut) can anyone help?  (Uses can I have XP Home Edition.)  I tried the system recovery, but that has not fixed the problem!

  Hello

  · What is the number and the model of the computer?

  · You have security software installed on the computer?

  · What happens when you try to open the files?

  · You receive an error message or error code?

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Linux: Impossible to go to Web sites related to google after 35 updated

  Hi guys.

  I am running Linux Mint and firefox just updated to version 35. Just after the restart firefox for this update, I can't load pages of google-related. I don't get any sort of unable to connect error. When I type the address and press ENTER, it changes immediately to the website I was on. I tried to delete my profile, start in safe mode, disable plugins/extensions and purge all files and reinstall.

  Any ideas?

  Thank you.

  I'm a fool, it was because I have disabled following steal HTTPS using the Web site.

• P6-2270ea: speakers on my monitor HP 2009v no longer work after Windows update 10

  Recently, I noticed there was no sound when using my desktop and when I clicked on the icon Audio (lower-right) I was told that no speakers are connected. I checked all connections between the tower and the monitor, but nothing obvious has been disconnected. There are some speakers on my HP 2009v monitor so I couldn't understand what was going on. The monitor is connected to the desktop computer, although it does not show as existing on the HP support assistant.

  After a lot of research on websites and download updates from microsoft and HP, I found advice on your forum to download the software updates Windows 8.x. This and now my headset worked, but the speakers do not always work. Help please!

  The monitor has its own set of controls and menu and I feel that something will not sit well with Windows 10 - when I tried to use the Auto function and the menu on the screen its has already disappeared (I got the extent of noise in the headphone previuosly).  I'm not in touch with this set of controls now, in which case I will go back to no sound at all!

  Any detailed suggestions please? -I don't know much about computers so I am a little intimidated by things like open in safe mode, etc.

  See you soon

  Hello:

  See if installing the audio driver IDT W10 Gets the sound working again.

  Install and reboot the PC.

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• Big squares that appear on the work after the update today.

  After update today, the large white squares are appearing on my work and will not disappear.  I have a PC.  It never happened, but after that I upgraded LR, Bridge, and Photoshop, it happened several times since on many different pieces.  I ended up having to reopen the room and all over again.  Last time I checked him and he saved good with all the changes I had made, I just could not work on the project because these huge white squares were in the way.  Many times this has happened when I tried to zoom to work more closely on a project.

  Two suggestions: in Preferences > performance, you can choose to uncheck use Graphics Processor (restart), or if you need the features, click on the Advanced button, uncheck "OpenCL" and set the drawing on Basic Mode.

  Pending the verification for the graphics drivers updated for your card. Here is a guide.

  Windows OS

  Click Start.

  On the start menu, click Run.

  In the Open box, type "dxdiag" (without the quotation marks), and then click OK.

  The DirectX Diagnostic tool opens. Click the view tab.

  On the view tab, information about your graphics card are indicated in the Device section. You can see the name of your card, as well as the way in which a lot of video memory, there.

  Once you know the kind of graphics card you have, visit the manufacturer's Web site to download the latest version of the driver. Here are the links to download the drivers from the manufacturers of most common graphics cards:

  NVIDIA: http://www.nvidia.com/content/drivers/drivers.asp

  AMD: http://support.amd.com/en-us/download

  Intel: http://support.intel.com/support/graphics/

  In rare cases, some PC manufacturers insist that you use their custom drivers, then go to their site, if the GPU drivers above will not install.