Extension of LAN Design

Similar Questions

• Can use adobe livecycle reader extensions to compile designer of adobe livecycle ES3 file?

  Hello

  I use livecycle designer and livecycle reader extensions to create PDF files. I want to use the action Builder feature, so I downloaded the ES3 Designer. After you have created a few new files, I tried to use livecycle reader extensions are (old version) to convert the file to add the saving function to adobe reader. It cannot convert the file successfully and stuck to the download page of the file as the attached screen. Does this mean I have to upgrade livecycle reader extensions to es3? Thanks in advance.

  

  Kind regards

  Craig

  He had problems of this kind which were caused by a Flash Player security patch.  See https://groups.google.com/forum/?fromgroups=#! topic/livecycle/ZRj27vcLXOI

  My memory is a little hazy on this subject, because three years ago.

  There was a LiveCycle blog on this November 11, 2008

  http://blogs.Adobe.com/LiveCycle/2008/11/livecycle_and_flash_player_10.html

  Flash Player 10 broke the sample application Reader Extensions provided with LiveCycle ES 8.0.1 and 8.2.1. When you use it, it basically crashes. The solution is to go back to Flash Player 9 on these machines that you use as LiveCycle clients.

  This problem has been fixed in LC 8.2.1 SP3 as well as in the ES2.

  The key is to upgrade your server, or upgrade to an earlier version (9) of the flash player. (copy of the google group)

  As you say, this problem is caused by security changes in flash

  Player 10.  The Web Reader Extensions UI is based on flex.  For LiveCycle

  8.2.1, the file dialog box appears automatically after the conversion is

  all.  However, in flash player 10, there were changes in how the file

  reference is managed.  Since it is possible to show a file

  dialog box based on the user action) and automatically poping out this file

  dialog box based on the old code base no longer works.  It is a

  known issue in LC ES 8.2.1 and decommissioning for flash player 9 works.

  However, in fix pack 2 for LiveCycle ES Update 1.  (8.2.1.2), this bug

  on flash player 10 has been resolved with an explicit button for

  Download the file.

• What is the replacement of design mode in flex builder 4.7 for builder extension cs?

  Because design view is not available in flash builder which is the use of the generator of the extension in the design of the user interface now let us design the user interface with the xml code that is very tedious and boring if there is no replacement for him only please aident.1 one more thing I want to know is that when I make new default project in the generator of expansion (flash builder 4.6) it also not able to load the errror creation mode is

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins\com.adobe.cside.libsinstaller_2.0.0.4-33034\archive\cslibs\2.0\4.5\re lease\apedelta.swc and no respondingSWC file failed to load. Everything depends on this file component SWC does not appear in the Design Mode.The CFC does not load because of:

  * Incompatible definitions caused by the use of a different version of the SDK

  * Missing class definitions referred

  I searched quite considerably and my understanding is that Adobe did not intend to support Design view more for Extension Builder.  In my opinion a very disappointing decision and one that is difficult to understand.

  The best solution I can find is to create the majority of your design in a Builder Extension parallel, right, of the project and then convert/import your design in your Extension.  It certainly isn't as satisfying that having the Design view for the Extension that you write, but it is better than to simply create your layout: guess/trial and error.

  Although this has not been announced by Adobe, I have a suspicion that the reason why they decided to not to put other resources in design of fixing what Extension Builder as we know it will be dropped soon, probably replaced by a method of creating extensions to HTML5/JavaScript.  My problem with this is that, other than to reassure that there are reasons of compatibility backward support for legacy extensions, it will not be a way of compiling an extension in a way that prevents people from seeing your code.

  It's all speculation, and I guess we will have to wait and see what happens.  Hope this has helped.

• Designer-as defined by the user of the Extensions

  I am to evaluate SQL Developer Data Modeler as a possible replacement for Oracle Designer. I wonder if the SQL Developer Data Modeler provides functionality similar to the notion of user-extensions in Oracle Designer.
  
  For example, I would like to be able to specify a classification marking on each name of the entity. Ideally, I would be able to specify that a new type of data and labels of property for the purpose of the entity and the SQL Developer Data Modeler would make a new field in the section of the dialog box properties of the entity, similar to how to manage this problem with Oracle Designer. Then, I would add a custom rule to define a default value or validate user input.
  
  Any information that anyone could provide would be greatly appreciated.
  
  Thank you.

  This type of functionality will appear later.

  Philippe

• Planning and design

  Hello

  I'm a Uni student and an assignment is to create a large network of WLAN.

  Please could someone point me in the right direction I need to know how to design and plan the WIFI network before you start searching for material. I tried all kinds of searches on the Internet but can't find something suitable.

  Please can someone help?

  Thanks in advance.

  Uzma

  Hi Sylvie,.

  At this time, it is likely that during the creation of a large network of WLAN you will use a "Light" architecture Here's something good "getting started" Cisco docs (and a video link) that could help with your first No. Don't forget to pay special attention to your (best to hire a professional firm for this function) Site Survey;

  Wireless LAN design guide

  http://www.Cisco.com/Web/about/ciscoitatwork/design_guides/DG-WLAN.html

  Site survey wireless FAQ

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_q_and_a_item09186a00805e9a96.shtml

  Understand the Lightweight Access Point Protocol (LWAPP)

  http://www.Cisco.com/en/us/NetSol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd802c18ee.shtml

  Deploying Cisco of the X 440 series wireless LAN controllers

  http://www.Cisco.com/en/us/products/ps6366/prod_technical_reference09186a00806cfa96.html

  Cisco Wireless LAN Controller Configuration Guide, version 4.0

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_guide_book09186a00806b0077.html

  Video WLC

  http://www.Cisco.com/en/us/products/ps6366/index.html

  Lightweight Access Point FAQ

  http://www.Cisco.com/en/us/products/ps6306/products_qanda_item09186a00806a4da3.shtml

  Registration of the light AP (LAP) to a controller (WLC) wireless LAN

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

  Wireless - compare products and Solutions

  http://www.Cisco.com/en/us/products/HW/wireless/products_category_buyers_guide.html

  I hope this helps! And good luck.

  Rob

• Binding of the SSID authentication

  Hi friends,

  It is a query of wireless LAN design.

  Components used

  1 WLC Version 5.0

  2. 1142 cisco access points

  3 cisco ACS 1120

  4 authentication: 802.1 x WPA.

  I'm radio 2 SSID named (VLAN 10) HR & ADMIN (VLAN 20) in all points of access. Wireless clients Gets the IP address using the DHCP server.

  The issue I'm facing when person ADMIN Select HR ssid, it uses its useraname / password and connect to the network and human resources able to access the resource

  So, how to prevent the HR person uses his user name password to connect to the ssid ADMIN. The ultimate goal is, same HR employee selects ADMIN ssid, it should not get network access.

  Please help me by sharing your valuable ideas

  Kind regards

  Sairam

  Hi Sairam,

  In the Radius access request, the WLC is including the following attributes (among others):

  Called-Station-Id: this should come in the form of "(nom dele de mac: BSSID:SSID WLC)"
  Airespace-WLAN-Id: this is the index of the WLAN through which the user connects

  So you could build an authentication (or authorization) rule in ACS that verifies if the Radius Airespace-WLAN-Id attribute has the same index as the SSID ADMIN (or Called-Station-Id contains the string "ADMIN") and, if so, and if the user belongs to the HR group (defined in ACS or AD, for example), only not authentication (or approval).

  Hope this helps,

  Fede

  --
  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• RRI and Client Mode

  Hello

  I'm reading the "Cisco VPN Config complete Guide" by Richard Deal and without a doubt it's a good book. I am confronted with a difficulty to understand something here.

  In my opinion, reverse road Injection is more useful in the Mode of Extension of LAN in Client mode, because the connections must be made from the company to the SOHO network network. And to do this, the corporate network must know the SOHO network. IPP is used in this case, install a static route inside the company and then VPN gateway redistribute it in the corporate network.

  In client mode, the reverse is true: connections are initiated from the client software or the SOHO network to the corporate network ONLY. So why do I care all to reach the SOHO network or client software from the company network? The author does not specify that.  That's what the author said:

  "The Cisco IPP provides the best approach to remote access clients. IPP is a further development of Cisco-owners for IPsec. At the end of ISAKMP/IKE Phase 1, the remote access client does the following:

  • If in client mode, the client is assigned an internal address of the gateway VPN; the VPN gateway this will add as a static route to the local routing table.  ---- > WHY?

  • If in network extension mode, the client sends the network number of the Interior of the interface of the VPN gateway using an ISAKMP/IKE Phase 1 message. "---> MAKE SENSE

  Please clarify why should I the IPP solution for the client mode. IPP for mode LAN Extension makes more sense.

  Kind regards

  AM

  Hello

  As I mentioned in the first answer,

  Consider a situation where you have a central office VPN device that IS NOT the device that crosses all traffic internal to the external network. In other words in your internal network the default route redirects traffic to another device, for example the perimeter firewall.

  Now for all traffic to flow between the 2 different networks you must naturally the routing tables on the device between the networks to have a route to each network or traffic not correctly between them.

  So consider a situation where your hardware client Mode Client connects to the central VPN device (which is not the gateway for all external traffic) which is running OSPF with all internal routers and the IPP is NOT used. The IP of PAT address used by the hardware Client Mode Client is never adverticed to the rest of the network and traffic flows incorrectly for the perimeter firewall to which the default route points to. If IPP has been activated (and other settings) internal routers could properly bringing traffic back to the PAT IP address to the VPN device rather than the perimeter firewall.

  Naturally, the situation described above applies to a LAN Extender mode also, but in this case the VPN device is naturally adverticing a whole network/subnet instead of an IP address of the host used as IP address of the PAT customer.

  If the remote Client Mode or LAN Extension Mode hardware Client connects to the central site, the central site must have a route to the remote network or the IP of PAT address for traffic to flow between the 2 end points of the network.

  If the central VPN device does not install a route to the address IP of PAT to the central network and then naturally the traffic won't be a way. Customer address IP PAT mode traffic will reach the central site, but the return to the address IP of PAT traffic will not flow properly without IPP.

  -Jouni

• Need explanation on adobe developer products

  I need some clarification on what products I need to use to develop PDF forms adobe dynamic...

  Currently, I use only LiveCycle Designer, but I have in previous posts, I found that I need to use additional products such as Acrobat or Extension to the designer.

  My question is if I have to devlop dynamic PDF form what exactly the product I need that will cover issues all in development?

  Hello

  Covering all developer/development issues is very broad.

  LC Designer is part of the LiveCycle. The components you need to will now depend on your environment, your workflow, and how you want to process the data.

  More information here: http://www.adobe.com/products/livecycle/

  If you want to create forms and use the player to interact with the form, then the minimum specification would be:

  • LC Designer
  • Adobe Reader

  However there would be restrictions in the functionality (for example you can not save the form in the drive because it would not be active player).

  If you want active player the form in Acrobat Standard, Acrobat Pro v8 or v9, so you will need Acrobat as well. This will unlock some of the features.

  If you want users to have full access to all features (as if the form is opened in Acrobat) with the reader, then you must also LC Reader Extensions ES2. You would use this to activate the form of the player before you deploy.

  See the summary here:

  

  Other components of the suite LC allow other features such as digital signatures, rights management, etc.. You should talk directly with Adobe sales representative at your location.

  Good luck

  Niall

  Ensure the dynamics

• the logon form will remove usage rights?

  Hello world

  I have Reader extended form in my trial version. After that, when I try to open the form in livecycle designer, I see a message box saying that

  "Certain rights of use have been applied to the form you want to open. Open the form will remove usage rights. Do you want to continue? "

  Why this message appears? why it takes away the rights of use when I open the form?

  Thanks in advance,

  KC

  I think that there is some confusion on the reader extensions.  A person/process apply reader extensions to a designed form rights.  If you read a form in the designer and make a change, which is a new form.  The process of reader extensions had been done on the entry.  You must drive - extend the form with the design changed after you save it to designer.

  I expect that you would NOT get a message like this if you open the form in Reader.

  Think of the reader extensions as if it were a signature.  If you change the underlying document, you invalidate the signature.  The message box will alert you to the fact that the redesign process removes the extension of rights to drive and you will have to make the extension of the detector to deal with again.

• Open extensions Manager * FM, *.pdf,.doc, *.docx files in In Design?

  Open extensions Manager * FM, *.pdf,.doc, *.docx files in In Design?   How does it work? @ !

  Hello, no I'm afraid not. Extension Manager uncompresses the ZXP files as its primary role. Whatever files are located in ZXP file will be unzipped to their specified location, for example, in the folder of scripts InDesign, the office, or just everywhere where the producer of the content specified files should go.

• How to open files without extension in design mode

  I had to remove the extension .htm files html of my site, the problem is that now that dreamweaver doesn´t allow me to open the file in design mode.

  The files contain the HTML without errors.

  All web files must have an extension to file appropriate - either .htm, .html, .shtm, .shtml, .php or .asp.  That's how the web works.

  I am not fond to organize pages in its own subfolder.  I think it is counterproductive and is confusing with all those index pages.  But it is an example of how you will organize your site.

  index.htm (domain name homepage)

  Home /

  index.htm

  topic.

  index.htm

  contact /.

  index.htm

  services /.

  index.htm

  Nancy O.

• How to design an extension flex to Photoshop Touch?

  Hi all..!!!

  I'm new to Photoshop Touch, if I have a little knowledge of flex extensions for Photoshop CS5 design. My question is, do I have to design an extension flex to Photoshop Touch? Also, I got to know through forums of discussion that will not work with the extension designed for Photoshop CS5 Photoshop Touch. What guide/tutorial or any kind of documentation to follow in this respect?

  Help, please!

  Thank you!

  Hi poortip87,

  I do not think that there is an SDK for Adobe Photoshop Touch specifically or resources to the creation of flex extensions for her right now. There are resources to create your own applications mobile http://www.adobe.com/devnet/flex/articles/mobile-development-flex-flashbuilder.html.

  If there is a specific feature you really want to see added to Photoshop Touch for now, I recommend you to make a feature request.

  -Dave

• Can we use flex extension designed for Photoshop CS5 to Photoshop Touch as well?

  Hello..!!

  I learned about the Photoshop Touch application and when I started to search on its SDK, I found that it uses the same SDK under Photoshop CS5. -What is my correct information? Also, if this is the case, then if I want to design an extension flex to Photoshop Touch, then the extension for Photoshop CS5 will be enough? Or, I have to design a separate from CS5? Please guide me...

  Thank you!

  No, Touch doesn't have any support for plugins.

  Touch is not related to the Photoshop code base.

  Touch is something written to the limited environment available on shelves.

• Flex Skin Design Extension

  Downloaded both the Flex Skin Design Extension for Flash and Fireworks CS3.
  After installation, I see two extensions in the extensions Manager.
  
  Works of Flash CS3 and I can create a new document from the Flash Templates.
  Fireworks CS3 seems not installing anything and is not listed in the menu commands in Fireworks as explained in the documentation:
  Access control commands > Flex Skinning > new Flex skin / Export Flex Skin
  
  I'm on Windows Vista 64-bit.
  
  Since I don't have any errors during the installation of the extension, I assume that files are move or something.
  
  Kind regards
  Muzak
  
  

  Hi Muzak,

  I was just able to reproduce the problem here, when I have not installed the extension as an administrator. To install it as an administrator, you must set the property on the Extension Manager executable itself:

  1. go to the Extension Manager installation directory - is the default location:
  \Adobe\Adobe C:\Program Files (x 86) extensions Manager
  2. right click on the Extension Manager.exe
  3. click on the Compatibility tab
  4. under privilege level, check run as administrator

  You'll probably want to remove the previous installation of the extension before reinstalling:

  1 double-click on the MXP file
  2. click on not for the dialog box "do you want to replace it...?
  3 file > remove extension

  Now you should be able to install properly by double-clicking the MXP file again.

  Hope this helps,
  -Rebecca

• LAN/WAN design issues: redundant network core design and equipment

  Dear all,

  I have a growing network that has inherited the reliability and scalability issues:

  (Example from my existing network)

  

  We pop connected with us through lines of CF, that LSPS are connected to our CF traverse on persistent organic pollutants.

  Now, it is necessary to make the core of switching (switch with "?" mark) redundant

  because this is the point of concentration of all connections outside.

  I got an appointment in order to study new equipment (now it's just Catalyst 3560) for this network block.

  Unfortunately, the budget is pretty low.

  I have the following considerations:

  I think that the main problem is that most of the connections is L2 trunk links and it is difficult to prevent this.

  It seems that I need to duplicate all the links to LSP FC, pop and branches (this seems doable) and rely on STP! (this seems bad)

  with all of these links.

  Currently, I have two options for the basic block:

  1. two Catalyst 3750 have duplicated links. (CSW1 LSP1, CSW2-LSP1) and rely on STP

  2. a switch Catalyst 4500 series with two redundant supervisors (probably, they allow to buy if there are strong arguments) have reproduced links and rely on STP.

  These two options do not look good because I have to rely on STP with LSP.

  I would use redundancy features and L3 protocols, but do not know how to avoid trunks

  I have no experience with the material of fantasy as a Catalyst 4500/6500 series.

  Could someone please advice me alternatives for options of design and of the hardware and confirmation or withdrawal of my options.

  Also, I would be grateful if someone could help me find strong arguments for the acquisition of Catalyst 4500 series light up the core.

  Thank you much in advance.

  Best regards

  Max

  Hi Max,.

  in the diagram and description that you provided the switch, you need to replace is a dashboard device that works only for the moment, in L2

  If you plan to go L3 communications in this device, you should review your design to the whole of the network and also review/discuss with MS how that can be converted into L3 communications

  If you want to keep the same as L2 and introduce it into the device or devices for redundancy, I'd rather have two redundant devices of a redundant chassis that I mean pair of 3750 is more reliable chassis 4500 with equipment redundant as soup, UPE however its a reliable option as well and again for sure

  If you rely on STP for redundancy, what is the problem here? It is time of convergence or what is your concern?

  hope this helps