Extension of WiFi using the Virgin Super Hub and Airport Extreme

Similar Questions

• What should I wear to the front with ATT and Airport Extreme?

  I have AT & T Uverse with an Airport Extreme.

  EI is implemented as a bridge, because it wouldn't work otherwise.

  I went into the game/NAT on the router/modem ATT layout and tried to activate some ports to forward.  Then I check the port and find that it is always closed.

  Someone here would be able to offer assistance with problems?

  I do this to try to send large files to a friend VIA files torrent based, although it does not seem to allow me to seed.

  Before ATT I got time warner and my own modem and router combo, and it works wonderfully in this configuration, so I can only the assertion that the issue is somewhere in the new place from the material.

  Now, if I try to download a standard torrent, I have no problem, but try to make my own with the trackers who have worked before, there is no dice.

  Thanks in advance for any help.

  ATT system is the NVG599 of ARRIS

• G505s and Virgin Super Hub

  Really pleased with this computer. Recently updated my internet hub to a Virgin Super Hub. I now can't get a wireless connection of wondows 8.0. When I switch to Windows 8.1 I get the message "unidentified network". I can connect via ethernet cable no problem.

  The wireless adapter is broadcom 802.11n network adapter

  Ipconfig confirms the hub is affecting an ip address for the G505s but will not allow connection internet. The hub admin confirms utility. Hub ping does not return anything.

  3 other laptops (including 2 Lenonovos on win 8.1) and 4 smartphones connect to internet via the new hub with no problems. I did the following: -.

  Restarted hub - many times

  Re-installed win 8 and 8.1 twice

  Follow-up of all win 8 and 8.1 updates

  Re-installed the driver Broadcom Wireless adapter - 3 times

  Tried the IP address physical address / gateway/SubnetMask etc.

  With the help of the Office of support from suppliers through various ipconfig and netsh commands

  Is this a problem with my network adapter?

  Jerry

  
  

• Unable to connect to websites using safari, although my wife use the imac, which has a separate login id can?

  When I open Safari from the dock it shows as usual, but when I try to connect to it looking for Web sites, it does not. can't display preferences etc either. Also, my wife uses the Imac and has a separate login ID and its works very well for her. Worked ok until the end of the week. Any ideas how to fix? Have tried to install the latest version of Mac OS X, but nothing helps.

  What version of Mac OS X is installed, your profile shows 10.7 but I suspect that it is not correct.

• How do I cofigure my laptop to use the Virgin mobile mifi wireless card

  Wireless zero configuration

  How do I cofigure my laptop to use the Virgin mobile mifi wireless card

  See the instructions provided with the Virgin card 'wireless mifi mobile.'

  What version of Windows, including service pack that you have (if of course service pack, start > run > winver > OK)

  Your laptop has a wireless adapter?  Look in under 'Network adapters' Device Manager (start > run > devmgmt.msc > OK).

  Look in network connections (start > run > ncpa.cpl > OK).  What icons appear?

• T430 cannot connect to WiFi unless the battery is removed and then re-installed

  Had trouble with t430 a colleague. It is impossible to connect to the WiFi unless the battery is removed and then reinserted. Once connected WiFi is strong and reliable. This seems to have started a few weeks without any notice. I think of a power setting? I also tried to replace the battery and the same problem. The two batteries hold high loads and are in a State of 'good '. Any suggestions?

  Solution has been update power settings to the driver does not allow the computer to turn off device to save power.

• Hai iam Amaladas from Chennai (India) iam Remote Sensing and GIS researcher here most people using the Google Earth application and five members using Iphone, we need a Google Earth app (India)

  Hai iam Amaladas from Chennai (India) iam Remote Sensing and GIS researcher here most people using the Google Earth application and five members using Iphone, we need an app (India) of Google Earth?

  https://www.Google.com/search?q=Google+Earth+app+India&ie=UTF-8&OE=UTF-8

• use restart from scratch using the option "ALT F10" and lose everything. Help, please!

  Whenever I try to connect my laptop, a screen invites me to do a repair of launch set-up. It goes through the motions for ten minutes and the screen turns white. The only way I can get at all is to restart all from scratch using the option "ALT F10" and lose everything. Any advice I would really appreciate.

  Hello

  1. Since when are you facing this problem?
  2. You did any recent changes?
  3. What version of Windows is installed on the computer?

  I suggest that you go into recovery options and try to perform system restore and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Otherwise, I suggest you to give us more information, so that we can better help you.

  It will be useful.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Read the motor current by using the controller PXI-7350 and MID-7604

  I use the PXI-7350 controller and MID-7604 drive to run a motor drive.  I would like to be able to measure the motor current while moving the engines.  This measurement is possible?  If so, what commands are required to read the motor current?

  Hi Casey,.

  the 7604 can limit the current to a value that is selectable by the user and you can activate the current reduction if the axis is stopped, but there is no way to read the current engine. If you want to measure the motor current, you must do it with an external device, but due to the current chopping and multiphase, motor control stepper motors is not a trivial task. Micro step mode the current phase looks like a rough sinus with lots of harmonics signal, so you will need to do a true measure requiring RMS of expensive measurement equipment.

  Anyway. If you need to know the temperature of the motor you should better measure the temperature directly. The most inexpensive device OR do is the NI USB-TC01, but there are many other options available.

  Kind regards

  Jochen

• Mac with bootcamp to format and reinstall windows, can I use the same cd key and product?

  I want to reformat my mac...

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  If it worked the first time, there is no reason that it will not work the second time on the same computer, as long as the Windows 7 is a full version.

  If this is an upgrade version, you must have the qualifying OS installed and enabled before you upgrade and it will work.

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

• How to use the windows fax machine and how to open an administrator account?

  How use the windows fax machine, and how can I open an administrator account?

  Original title: activateadministratoraccount

  Hello

  Thanks for your posting in the Microsoft community

  Well, you can enable the administrator account hidden instead of an account

  You can make the win + r and write lusrmgr.msc in the start search box or in the command run and pressing ENTER. Or, you could open the computer by right clicking on computer management in the start menu and select manage.

  Expand System Tools > local users and groups > users.

  Right-click the administrator account, and then select "Set password".

  In the 'set password' click 'continue '.

  In the "set password" enter the password of the administrator twice, then click on 'Ok '.

  Then, activate the administrator account. Right click on the administrator account and select "Properties".

  n check the box "account is disabled". Click on the Ok"" button.

• You can use the x 86 version and the x 64 version on two different computers

  I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?

  Hi hgcxngv,

  No - not at the same time.  A key is an installation by the license agreement (regardless of the size of bits).   Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).

  You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).

  The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).

  I hope this helps.

  Good luck!

  Kosh

• Problem with update of a column by using the procedure of database and refreshing or put in value programmatically

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  I have a page that consists of two taskflows.

  First workflow has a fragment which is to have a table based on view object salespersons (not editable)

  Second task flow contains a form of ADF from the same view object Salespersons.

  As the user selecting a line in the table of the same record is displayed as no problem.

  Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.

  I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:

  Now, here's the code of the Java bean for activation:

  Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized

  and Activate and Deactivate buttons are not disabled and active properly.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  Links BindingContainer = getBindings();

  OperationBinding operationBinding;

  operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);

  operationBinding.getParamsMap () .put ("pId", vId.getValue ());

  operationBinding.getParamsMap () .put ("pStatus", "A");

  Object result = operationBinding.execute ();

  dcStatus.setValue ("A");

  } else {}

  return;

  }

  }

  Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  -no doubt this two lines are not needed here

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  dcStatus.setValue ("A");

  BindingContainer links = getBindings();

  OperationBinding operationBinding;

  the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);

  Object result = operationBinding.execute ();

  } else {}

  return;

  }

  }

  Here's the code from the Fragment of shape for used buttons.

  "< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"

  < af:showPopupBehavior popupId = "pActivate" / >

  < / af:button >

  "< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"

  < af:showPopupBehavior popupId = "pDeactivate" / >

  < / af:button >

  Here's matching Popups for each of the buttons Activate and Deactivate.

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >

  < af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >

  < / af:dialog >

  < / af:popup >

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >

  < af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >

  < / af:dialog >

  < / af:popup >

  Thanks in advance.

  Best regards

  Arif Khadas

  If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.

  To change the value of the GET value of the component of the link layer and change it.

  In this way the changes are captured by the framework and you should see them.

  Timo