Read the motor current by using the controller PXI-7350 and MID-7604

Similar Questions

• 'The specified network folder is currently mapped using a different user name and password'.

  "The specified network folder is currently mapped using a.
  another user name and password.
  Connect using a different user name and password
  First, disconnect any existing mappings to this network
  share '.
  I got this message when trying to access a laptop on my home network. It's a laptop which came for years. The only change that occurred was the removal of a few videos to Windows Media Player. In fact, I was sitting near the laptop (laptop 1) that stores the video & audio files that I share on my network for years and an additional (cell 2) laptop computer on my network. I was simply remove a playlist via WMP and I witnessed portable 2 lose access to files I had shared for years with my home network. I don't even use WMP, I had just open trying to access the laptop 1 video/audio files to my PS3 system. I was clear an old list of video of WMP so I could add the extra avi files to the list that I had collected over the years. I wanted to not double many videos so I removed the videos in WMP list. Since then, I'm not able to share anything of my laptop 1 to the rest of my network. I did not like WMP before, now I really despise WMP. When I try to share a folder, right click, share with & click on homegroup (read/write), the option is not selected. Any solution would be greatly appreciated. Thank you

  Hello

  The link below talking about a similar problem that should help you to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/the-network-folder-specified-is-currently-mapped/928f6313-fe2c-4d2D-A247-152ec022e062

• "The specified network folder is currently mapped using a different user name and password", trying to connect to a remote drive.

  Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share.

  I am trying to connect to a remote drive. I clicked to map the drive, entered the name of the drive, came the name of login/password for the computer turns on and then it give me this error message: the specified network folder is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

  In Windows 7 Enterprise, I would like to point out that, if you map \\server1\share1 as drive letter X using "user1" and "password1", then try to map \\server1\share2 (a different share) as drive letter Y using the same ID "User1" and "password1" and you select 'connect using different credentials' in the dialog box connect a network drive and specify the id "User1" and "password1". you will get this error MESSAGE INCORRECT that says 'the specified network folder is currently mapped using a different user name and password'.

  The message is bad because:

  1. the specified network (action2 in my example) folder is not mapped at all, and

  2. the server (in my example, "server1") is already mapped (to a different and different drive letter share) using the SAME user name and password.

  The error message is wrong in two respects.

  This let me puzzled for a while until I realized that once you have mapped to 'Server1' using the credentials, you can map to different actions on the same server without re - specify the credentials.  It is NOT CLEARLY the 'Map network drives' dialog box, which leads to users (like me, and I'm a programmer by trade) trying to enter credentials again and this incorrect error message.

  David Walker

• I'm reading the data (speed rate and flow) of a table and it plot in a graph.

  I'm reading the data (speed rate and flow) of a table and it plot in a graph. I need to draw two values of l/min (speed) to the same speed. How can I do using a loop for?

  There is no need actually to use a loop FOR this. And using a graphic waveform isn't the type of field for this, for a waveform you a (Start), the dT T0 (greatness not) and table D (Data), this isn't what you want unless you know precisely the measure will take place according to an orderly disposal, you'd want a xy chart so that you can trace the measures where they occur in the axes X and Y of preference.

  

• Need help with TS to read the list of variables and/or LV

  Hello

  I use Labview adapter in Teststand to open WinIDEA and read the values of the variables. Basically LV lib files are used to read the value of the variable at run time, and returns the value of the variable. Contribution to this labview function i.e. variable name string and output type cluster.

  I need to read the list of variables and compare it to the value limits for each variable. I perhaps need to read at least 50 to 60 variables in one step if possible or a variable at a time in a loop. I want to add these variables in a txt file with the limits and read of Teststand as a string array and compare the result. In this way is easy to add or remove variables from the list and therefore their expected value. I tried to use the shipper of the property, but there need a stage name or local/global variable.

  Another way is to add the code in labview for comparison of variables value read, then I lose teststand power and flexibility.

  I am struggling to find the best way to achieve this. Any ideas?

  I would like it.  Basically, you have a file limit with 2 data tables.  A table contains your variables and the other your limits.  Then you wrap on a test of a string value.

  Let me know if you have any questions.

• How to read the data of BLOB and save to the file system

  Hi friends.
  
  I have called DEMO table there image stored as a BLOB. now my requirement is to know how to read the data of BLOB and saved in the file system. is there a procedure
  to read the blob object and stored in the file system. pls suggest me with an example.
  Thank you

  HI - don't know what version you have, but have a read through this:

  http://www.Oracle-base.com/articles/9i/ExportBlob9i.php

  Hoek link is to import the blobs in the db, it is export, to a file.

• Difficulty to read the instrument of series and acquisition of data simultaneously.

  Greetings,

  I have some trouble getting my VI read from my data acquisition and instrument of the series at the same time.  If I run the Subvi simultaneously (i.e. subANG runs in a window and subVEL is running in a second window) both return the correct values and behave as I expect.  However, if I call the Subvi in a society mother VI and try to run them both in the same loop structure subANG gets stuck and won't be reprobed with a signal change.

  I also tried to use a stacked sequence or plate to separate the execution of subVEL and subANG, but I still get no response to subANG.

  The point is is that, if I run Parent.VI in a single window and then creates a copy of subANG (call it '--copy' or other) and run it in a second window, Parent.VI behaves properly and will update the readings as they appear in '--copy '.

  I enclose 3 files.

  (1) subANG.VI - this bed an an inclinometer RS232 signal.  The signal is refreshed every 10ms or more.

  (2) subVEL.VI - this bed raw tension of a channel on the acquisition of data, calculates the average then that converts into a pressure difference and finally a speed based on the pressure and temperature inputs.

  (3) ParentVI.VI - they simply call and displays the Subvi

  My guess is that it's a buffer problem, but I am confused.  Someone out there in Labview Earth knows why this might be happening?  Suggestions welcom.

  It is not an instrument of series.  It is a UEI PowerDAq with their typical A/D and the cable.

  I found away to make it work by placing subANG and subVEL in some time different loops side by side in ParentVI.

• CEP - read the binary file (png) and download with $.ajax

  Hi all

  I'm trying to create the POST request with extension PRC binary image

  I read the PNG file under

  fileContents var = window.cep.fs.readFile (fileData.files [f], cep.encoding.Base64);

  Then I need to create the object with that content converted to binary Blob data (?), but I always

  Error: InvalidCharacter

  Error: Exception of DOM 5

  Please notify

  found the solution

  Use the function base64DecToArr to mozilla foundation

  https://Gehrcke.de/files/perm/blog/2015/jsDecode/test.html

• I have read the article of Signatures and successfully applied, but it only works on new messages, not sent messages or responses. How can I get it to work on everything?

  I read the article of Signatures in the help files and includes a signature HTML file, and it works fine but only on new messages. Nothing appears for forwarded messages or responses. How can I make it work on all types of outgoing mail?

  Tools-Account Settings - Composition and addressing
  On the middle of the screen

  If the Tools Menu bar does not appear, press the alt key to make it appear.

  You must set this option in each of your accounts, if you have more than one.

• read the type of variable and the value of LabView

  With the help of the TS. Class sequence that I try to get the type of variable and the values of local variables, parameter, fileglobal and stationglobal. Unfortunately I'm not able to find the right function. Hope someone can help me.

  Kind regards

  Lars

  Hello

  Maybe this simple TestStand example will help you.

  The API calls for LabView are the same...

  Hope that helps

  Jürgen

• motor current by using NI USB-6009

  Is there a way to measure current of a motor with the NI USB-6009 case? I understand that I must use I = V/R. But it seems that with this concept, I would have losses for the engine, so I used a small resistance and measure the voltage across it. I'm trying to get a reading of the Spike current with a voltage to an engine No. Thanks for the help.

  -Nick

  The shunt would be just to go online with the engine and measure the voltage drop across the resistance.

  Eric

• I can't read the FF27 mp3 files and I tried some help I can find.

  When I try to play an MP3 in FF27 I get a black screen that says:

  "The video cannot be read because the file is corrupted.

  The web console shows this:

  "Media resources http://tomwhelan.ca/commercial_2014.mp3 can't be decoded."

  Any ideas?

  It is on a XP machine which is fully updated.

  Thank you

  V

  From 26 of Firefox, Firefox on Windows XP will attempt to play media encoded MPEG as MP3s natively in the browser. This requires that the necessary components in your system, but they are perhaps not? To turn off the native player and return to the use of a plugin like Windows Media Player or QuickTime for this kind of media, you can make a change to the configuration under the covers. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste media and make a pause so that the list is filtered

  (3) double-click the preference media.directshow.enabled from true to false.

  I don't know if this changes enter into force immediately or after you exit and then restart Firefox.

  Note to other readers: Windows XP uses DirectShow (DirectX). Windows Vista, 7, 8 and 8.1 uses Media Foundation to play natively coded MPEG media. It's a different setting.

• How can I read the active (connected) Renault and send then to the entry on DAQ device name help?

  I have a property system for daqmx node but it won't let me change it to read when I right click on it. I try to have my program detect the name of data acquisition which is plugged into the PC and then send to the daq assistant so that it runs properly wiithout having me manually change the name of the device every time I change hardware.

  labview12110 wrote:
  Im just frustrated that the only function I have is to get a list of the things that I can't do anything with. MAX knows who is active can I call in some way?

  You do the programming.  What is LabVIEW.  MAX gives you all the tools to do what you want and much more just to do what you want to program.

  Joined a VI that does what you want.  I look at all your devices and returns the first not simulated.  Apparently this list already excludes devices not connected to the system.

• VCO 5.5.1 cannot read the memorySize VcHostHardwareInfo attribute (and other attributes to oppose)

  Hello

  I created on vco 4.1, 4.2 and 5.1 workflows, each of them strive to find, so when I try to upgrade to 5.5 or 5.5.1 does not work.

  When try to read attributes like vchostsystemhardwareinfo memorysize, are equal to 0, this value is incorrect, this attribute must be the total amount of physical memory on the host in bytes.

  Other values that I can't read are vcdatastoreinfo.freeSpace.

  Can someone help me?

  I thank you very much.

  Try to turn off the inventory service Re: vCO 5.5.1 & vCenter 5.5.1 - accessible Datastore: false, only showing freespace and capacity, implemented wrong

• Air App won't read a local text file using the openAsync/readUTFBytes on user (not administrator) mode

  I run an Air application, I did for the office, the real installed executable already deployed in the machine (not Flash Pro / Flex dev environment.). For some reason the application cannot read a file of text stored in the same application, unless I run my application as the administrator of the operating system.

  When I run the application as an administrator, or in the development environment, it works fine. Maybe this is related to a security issue? I have read the adobe air documentation, and it should work...

  I use openAsync/readUTFBytes on the user as shown here:

  var continueGamesConnection:FileStream(); 
  var continueFile:File = new File(File.applicationDirectory.resolvePath("continueGames.txt").nativePath.toString());  
  continueGamesConnection.addEventListener(Event.COMPLETE, openSavedGames); 
  continueGamesConnection.openAsync(continueFile, FileMode.UPDATE);  
  
  
  function openSavedGames(event:Event):void 
  { 
       continueGamesConnection.removeEventListener(Event.COMPLETE, openSavedGames); 
       var content:URLVariables = new URLVariables(); 
       var loadedContent:String = new String(); 
  
  
       loadedContent = continueGamesConnection.readUTFBytes(continueGamesConnection.bytesAvailable); 
       content.decode(loadedContent);  
       variableX = content. variableX 
       //etc, etc.  
       continueGamesConnection.close(); 
  }
  

  Moreover, I also tried to use FileMode.READ and others, and it still gives me the same problem. Doesn't work only if ran on admin mode or dev environment...

  It's very frustrating, I tried to read other messages without a bit of luck... What solutions people use for this kind of problem?

  I have seen that you can set the application to run as administrator somehow, and I think that might work. However, it should work perfectly, since he does not seem against the Air API security. Looks like an overdose. But despite this, how do I do that?

  Your help is greatly appreciated!

  I think you can do less detail,

  var continueFile:File = File.applicationStorageDirectory.resolvePath("savedgames/continueGames.txt");