External hard drive creates folders and files and lose the music I synced to it.

Similar Questions

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I don't understand. What makes you think the reader 'is not compatible' with Windows 7? Windows (or any other OS besides) sees no external hard drives as "compatible" or not...

  Now if you have a PROPRIETARY disk, then that is a different case. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• I backed up on an external hard drive of PS4 and cannot open it on my iMac with OS 10.8.5. He says to reinstall, but the only version is on my external hard drive. How can I transfer it to my iMac?

  I backed up on an external hard drive of PS4 and cannot open it on my iMac with OS 10.8.5. He says to reinstall, but the only version is on my external hard drive. How can I transfer it to my iMac?

  Hi aliceag,

  You can please download Photoshop CS4 from the following link and install it

  Link: other downloads

  Kind regards

  Tanuj

• I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices.

  I have a Macbook air running OS X El Capitan. I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices. I don't know if I need to restart the time Capsule or change the wireless setting, etc. ?

  Please advise...

  The TC appears in airport utility? If not then it is probably not part of your network or is lost... upgrade installed you El Capo because there a lot of questions.

  What is the TC plugged into the network by ethernet? And configured properly? Are you to internet via the TC... but can not see his drive... that would be typical?

  Have you set Finder preferences to display the network drives? Apple keeps making it difficult for some unknown reason.

  You actually have to mount the drive TC if it appears under shared... it still may not appear if you double click on it. Under the search box on the top of the right hand you see Connect (As) box, type the name or IP address of the TC in there... Make sure that you save the password from your keychain.

  I try to use my Time Capsule as external hard drive

  For the storage of the files it is fine.

  For the execution of direct files for an application in the Mac, you are very likely to damage or corrupt the file at some point.

  And how do you do backups? Time Machine can't help you... it won't work.

  Backup is crucial, especially if you do things apple say not to do... That is to say move your photos or the iphoto library to the TC and try to use direct from there... expect any day to need a resumption of the library.

• I want to copy files from one external hard drive to another and can not?

  Hello

  I try to copy the photo files and video from one hard disk to another.

  The donor 2 TB drive is formatted NTFS and the receiver is 1 TB OSX extended.

  There are about 72 000 photos and 475 GB in size. The 56 video about 226 GB files copied with some lacks but then make drag and drop made the other files of 5 or 6.

  I tried to drag and drop, but some files have been copied not. After a lot of research through what was had been transferred I found about 5,000 had not copied I then did drag and drop with each of the 20 files or if some copied OK.

  The troublesome files kept suggesting that a file "already exists" and stops the process when I clicked ok.

  I want to delete the NTFS drive and reformat for OS X extended and then replace them on the 2 TB drive.

  What I am doing wrong? Need me a software to copy?

  Select the drive in the disk, then Edit/restore utility and select your 2 TB drive in restoration since. This will probably reformat the external hard drive, erase all data.

• SP3 and the files on external hard drive history ignores certain files.

  SP3 and the history of files on external hard drive seems to ignore certain files.  All this experience?  I need to know why. Is weird.

  Hi Ellie,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you are unable to copy all the files saved on the history of files on Surface Pro 3. Don't worry, will help you with the question.

  1. What files he jumps?
  2. You get the error message?

  You can check out the link below and check if it helps.

  Back up photos, documents and other:

  http://www.Microsoft.com/surface/en-us/support/music-photos-and-video/back-up-photos-documents-and-more

  What happens if something is wrong in the history of the files?

  http://Windows.Microsoft.com/en-us/Windows-8/what-something-goes-wrong-file-history

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How do return on LR the possibility to repeat already published photos complete with the p

  LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How to get back on LR the possibility to repeat already published photos complete with a history of editing? Thank you.

  Thank you Joe Maniac.  I deleted the original linked files on my internal hard drive which were dng files, but had copies of the raw files edited and edited the exported raw files (in JPEG format).  I don't have copies of dng files.  So what I ended up having to do was import the original raw files which then made a DNG copy on my internal hard drive.  The link has not changed, but now the files were back in the original track for missing photo alerts disappeared and I was able to see my change history.  The process has been painful, but without the dng, I had nothing to do a link to more if at least re-import them files has recreated the dng.  I don't know if there was an easier way, but it seemed that the problem did not the link deletion.  I use LR for a few years, but it was a rookie mistake, precipitated by my hard drive being so jammed up I ended up delete what I shouldn't.  I should have just moved the dng and the link to an external hard drive. Thanks again.

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function. I have a photo library on an external hard drive. I slowly imported previews of the photos selected from the library in

  I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function.

  I have a photo library on an external hard drive. I've slowly been import previews of the photos selected from the library in my catalog, adding them during the import process - well. But now, I hit a problem. Another folder in my library contains several subfolders, each containing a number of photos (a mixture of RAW steals (naves) and jpg). I was importing found in my catalog each Subfile in turn, using the Add function, usually of the jpgs only from each Subfile. It works fine, until I reached a particular Subfile. For some reason when I try to import from it and select the secondary file as a Source, only the RAW (NEF) images appear in the preview pane (sorry, forgot the correct term for it!). I know that jpg files are in this auxiliary file on the external hard drive, because when I view its content in Windows, they are all there. But try as I can (choose the file under source, select the folder parent as a source, try to copy or move them, instead of adding them), nothing seems to work. Since they do not appear in the preview pane, I can't import them. It does appear that this a Subfile where the problem exists, but I don't see anything that is different from the others (names of files under all use the same structure - yyyy-mm-dd_custom name, and pictures in all subfolders are adopting the same denomination structure too - yyyy-mm-dd_sequential number_custom name.) NAVE/JPG. So what I am doing wrong? Any ideas please.

  It is possible that the images in this particular subfolder were taken in your camera in RAW + JPEG.  If so, you will need to go to preferences under the general tab and make sure the box "processing JPEG files files next to raw as separate photos" is checked.

  

  However, assuming that this is the case, there is really no reason to import the JPEG file if you already have the RAW file.

• Flashing external hard drive red / blue and do not make any noise

  Hello!

  today when I turned my external hard drive 1TE * PX1396E - 3T 01 * he did not have any sound or can´t I think it works when my hand is in contact with it. * The light continues to blink red and blue *.
  I have a Macbook Pro OsX and it has always worked well. He did not fall and it was working fine yesterday.

  Can someone help me? Quite desperate, 1TE is so much...

  Thank you and regrets!
  Mariana

  Looks like a HARD drive malfunction.
  But someone wrote here in the forum that it could solve a similar question.

  RECOMMENDED wrote: _

  + all started when I had not used the HARD drive for a while. The problem is the battery. Although the light went blue; He did not make enough power to the HARD drive. It changed with a similar adapter and everything worked again. +

• Best external hard drives with usb and 2 crush

  I plan to buy an iMac 27 "and looking external hard drives usb and lightning which can be chained. The cie has some on apple's site, but do not have good reviews. Technology g g download reviews good enough readers. All of the suggestions.

  Have you looked at OWC? I have several of their readers, but mine are not Thunderbolt - they are either FW or USB3 or both.

  http://eShop.MacSales.com/shop/external-storage?_ga=1.37930981.756347728.1456539 978

• How can I change the permission of my external hard drive from tours and write "without formatting?

  My Toshiba external hard disk format was automatically replaced Windows NTFS after I had plugged on a Windows PC. Therefore, the permissions of the drive changed to 'read only' to "read and write" after that I used on my Mac. It happened once before and I remember the engineer on duty in an apple authorized service center had solved the problem without format the external hard drive. This is not an option for me now as well, but all the solutions, I looked to say online that the formatting of the disc is the first step. Help, please!

  Install software such as Paragon NTFS on the Mac.

  (139384)

• Disconnected (removed) external hard drive still exploring and using drive letter - how to remove?

  Dear community,

  I recently removed an external hard drive of my computer laptop windows 7, I guess it was not not ready to 'remove Saveli' it at that time. The hard drive itself is fine, but the icon remained in windows Explorer because it is disconnected. I manually assigned the drive letter Q on the drive before, and it always appears like that, since this disconnect. When I click on it, there is of course a mistake ("Q is not accessible. "Access denied"). When I plug the hard drive it is listed in another letter (E), the 'Phantom' to Q drive is not affected by it at all.
  It (the ghost drive) does not appear in the computer/disk management manager and I can also not reassign the letter Q on the original hard drive (or any other - is not in the list!).
  I would use the letter Q again to the hard drive (my paths and associations of are consistent) and want to get rid of the ghost car. Any ideas how?
  Thanks in advance,
  Philipp

  FYI
  It's great that the problem corrected itself, but for general reference or other who can run in the ii, how to fix a ' stuck or ghost hand "is to remove its entry in the registry key below and then open a new market or restart.  This problem is relatively rare, but sometimes and still does not resolve itself.
  (Note this drive letter Q is used by Office, click Run and sometimes mysteriously appears for this reason, unlike your situation.)

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MountPoints2]

• A question on the sharing of external hard drives between computers and tagging in bridge.

  I'm editing/organizing files for a client on their external hard drives. If I label files in Bridge CS6 on my computer, will they see these labels when they open the readers in Bridge CS6 on their computer?

  Labels should be included in the metadata, so that they should see their.