External ISight not recognized under macOS Sierra

Similar Questions

• 4 finger swipe does not work under macOS Sierra!

  Hey all, I upgraded to macOS Sierra and noticed that one of my function used more regularly on Mac OS, 4 finger swipe to switch between desktop computers does not work! Mine is an April 2011 MacBook Pro.

  Earlier, 2 fingers sliding back in the files, similar to switching back and forward for the Web pages in Safari, has been abandoned without reason penetrable. I hope that's not the same fate for 4 finger swipe to switch between desktops.

  I probably use hundreds of times every day for switching between desktop computers because I have safari, MS Word and open the mail outside of iTunes on separate workstations. I hope that a fix is released soon!

  Apple, do not bite of useful outdoors features!

  Ravi Reddy

  4 finger swipe works for me and appears as the 2nd part of the Trackpad Control Panel.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Still is not supported under macOS Sierra!

  Hey,.

  I am trying to import goods of PrPro in CS5.5 Encore and also tried CS6, but I always get this message:

  

  And this happened right after that I improve my system to macOS Sierra.

  Any suggestion? I appreciate your help.

  Yes, I meant dynamic link. and I found it is that prpro CC doesn't support dynamic link to Encore CS6.

  Premiere Pro CC are not dynamic links

  So, I followed the steps described in the link above or just go back with PrPro CS5.5/CS6 or maybe just use Final Cut Pro?

  So bad that Adobe do not support its expensive products.

• Mail.app: S/Mime encrypted attachments do not work under MacOS Sierra

  Hello

  I can't send or receive attachments when messages are encrypted with S/Mime since the upgrade to Sierra. Attachments sent and received on a MacOS-El-Capitan is available on El Capitan. But the same messages with attachments is more available on Sierra, as well as new messages with attachments sent from Sierra can be viewed on El Capitan or Sierra. Looks like the handling of encrypted attachments is completely screwed.

  The indication for messages with encryption and signature is still flaky and is not consistent.

  The indications for encryption and signing is a bug for years. What is interested in someone at Apple Mail.app and S/Mime? It doesn't seem a Herculean task to do things, and it is a core feature.

  Thank you

  iMac MacOS 10.12

  Mailing address:

  Version: 10.0

  Obtained from: Apple

  Last modified: 30/08/2016, 05:53

  Kind: Intel

  64-bit (Intel): Yes

  Signed by: signature, CA software, certificate authority root signing of Code Apple Apple

  Location: /Applications/Mail.app

  S/Mime, workstation is version 9.3.

  I have the same problem see my post on the import of attachments.

  Mail attachments disappeared with Sierra

• FCE 3.5.1 does not work under macos Sierra

  Hello

  After the 'upgrade' to Sierra FCE (version 3.5.1) has problems.

  I can open a file existing in the CAF and do casual work. I can open a new project and import existing video files.

  By the time I save the new project, it creates the new file in FCP, but the beachball appears and FCE crashes.

  The camera import, try "Capture", immediately unexpected CTF during an attempt to initialize the device.

  Right now I don't understand how to get around. Suggestions or comments are quite

  appreciated.

  Thank you

  Gerfried

  FCE 3.5.1 or even FCE 4 is not compatible with this OS.  You could try to partition your hard drive and install an older operating system (10.4 to 10.6) and install the old CFE in this topic, or just get a Mac used with the older operating system for editing purposes.  Otherwise, you must switch to FCP - X or Adobe Premier if you want to change on the new OS.

  -DH

• 6 purchased Lightroom on amazon, does not install under macOS Sierra

  Hi all

  I bought Lightroom 6 for Mac from amazon and got a serial number and a download link. When I try to download/install, it is said that it does not find its configuration files. When I checked the product description again once it is said, it runs under OS X 10.8, 10.9 and 10.10. I flew forward but of course he understood under the name "or more." I recently changed to Windows Mac and to win, it was always like that.

  In any case, says amazon support sorry, I'd have a license number now, so no cancellation possible. What can I do to use the serial number I paid €112 for? Thank you!

  Best regards

  Thomas

  I assume that you have downloaded the dmg installation without problem and the error occurs during installation.

  If so and the error is in English, attach a screenshot of it or re-upload your installation file.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Remote Desktop does not work since MacOS Sierra update

  Unable to connect with Remote Desktop or cord that worked before update

  Greetings geoffshop,

  Thank you for using communities of Apple Support. It seems you want to use under macOS Sierra remote desktop, but it does not work.
  I recommend you read this article, it has the settings you want to check to make sure that it is able to work.
  

  macOS Sierra: allow remote desktop to access your computer

  Take care.

• Shift - command - down and shift - command - up do not work in macOS Sierra

  Shift - command - down: select the text between the insertion point and the end of the document.

  Shift - command - up: select the text between the insertion point and the beginning of the document.

  No longer work under macOS Sierra (both worked in Yosemite). :-(

  Someone has the same problem?

  In what program? Shortcuts work for me in TextEdit.

• HP Officejet Pro 6700 Premium: 12.34 FOR OFFICE JET 6700 DRIVERS does not WORK WITH MACOS SIERRA

  I guess that the file 12.34 driver does not work with MacOS Sierra, it is impossible to save a file when scan you a document. Instead of file name, you can see "prefix" and in all cases, it is impossible to save any version of the document, does not illuminate on the button "Save". Do you have a solution to risolve without using the Web server?

  Hello

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c05270318

  Kind regards

  Shlomi

• external USB drives not recognized under xp pro 64

  I bought a genuine version of XP Pro 64 to load on my computer and because Win 7 froze with drivers nVidia graphics.

  When I plug a recently bought Seagate Goflex or one of the new Western Digital external hard drives, they are not recognized.

  They do not show on my computer or disk management at all.

  They appear in Device Manager with a yellow question mark big under 'other devices '.

  I right click on the hard drive in the Device Manager to update the driver, and it always fails.

  Before ask you, these USB drives work perfectly on my other XP Home 32 System. The cables are good.

  I tried different ports, front and rear... no good.

  My system XP 64 Prp is updated w/Windows update and software chip to the motherboard.

  Strangely, I have a hard drive WD Passport USB 500 Gb one-year-old that works fine on XP 64 system.

  WD technicians say that I am the only one with this problem. PlugNPlay needs no driver, what do say.

  I also have IDE/SATA USB cable w / the power cable, I use to connect my old internal drives.

  Works fine on the XP Home 32, but I get the error "USB to ATA/ATAPI Bridge" in the device with the 64-bit System Manager.

  Yes these devices are all "turned on."

  Something is missing on the XP 64 system.

  Help is very appreciated.

  Been looking for a solution for a week now.

  Thank you.

  Hello

  See the following articles that may help you resolve this problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196
  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
  http://support.Microsoft.com/kb/314634

• Right control key does not work do not under macOS Sierra

  Since I installed macOS Sierra, the right command key is somehow mapped the option key (and the option key is still down option). There is a new setting I need to change? I'm not find it.

  Reset the default settings

   > sys prefs > keyboard > keyboard > restore ddefaults

• Blank thumbnails for people under macOS Sierra

  Hi all! I use an iMac 21.5 ' (end 2013) with the latest Mac OS update of the Sierra (10.12 for the moment).

  I found a strange behavior of the Photos app, using the people album.

  With the help of pictures under Mac OS X El Capitan, I crossed the long process to define all the faces of my friends for each image of my iCloud photo library; I also removed all faces unwanted by pressing the x key.

  Under the Sierra, the Photos app crossed another analysis of the faces still: all the faces I confirmed under El Capitan are still there, but in addition there are plenty of new tiles white in the section "add people" that I can't delete or use.

  I thought something during the scan of people was wrong, so I rebuilt the library of photos, but nothing has changed.

  It turned out that the blank tiles are people I removed (under El Capitan) by pressing the x key. In fact, if you duplicate one of the images affected by this issue, you will find that it recognizes the new faces and the application lists correctly under the section "add people". If you open the image and remove the circles of those faces, you will find that the section "add people" now have black thumbnails.

  I think it is a bug. Next week, I'll call Apple support report.

  In my opinion, the good feature should be the following:

  • If people are recognized on a new photos, these are listed under the heading "add people";
  • If you want to hide them, faces are still recognized by the software, but they do not appear in the list of people;
  • If you want to remove them (by pressing the x on the circle button), the must go to the section "add people" or the "hidden people" section You should be able to rescan single image, image group or the entire library, if you want to return to the previous state.

  I have the same problem, but no solution.

  And I think that the screen "add people" is not very useful, just what is actually more complicated (Photos hiding in Sierra Photos)

  All photos should go the list of 'People' where I can either name or delete (I like your proposal of new analysis to recover).

  I would use 'Hide' for the less well-known people on the main list. But according to leonie it also excludes their pictures of memories.

• iSight works partially on macOS Sierra

  After installing Mac OS on my Mac Pro mid-2010 Sierra, my external iSight has stopped working (the microphone and video).  I have reset the controller of the system as suggested by another user to reset the controller management system (SCM) on your Mac - Apple Support and he got the iSight works partially.

  I have played for a little more and found the following.

  1. the green light on the iSight not (even with the cover open) until what you start an application that requires it.  For example, the light comes on when I click on Siri, and the microphone is activated then only.

  2. I do not think that the video is working (certainly not in FaceTime), but discovered that in the same way that above, the video comes on when I load Skype and PhotoBooth, until of course the lens is open.

  3. as soon as you close the application using the iSight, the green light turns off.

  4 FaceTime work however still not at all.

  If anyone has any other ideas on how to change/fix the video portion iSight FaceTime let me know, otherwise I hope it developed a fix for this soon.

  Also having this problem and has been able to replicate what you have done. Using a Mac mini from 2012.

• external drive not recognized in my computer explorer\

  Hey.
  My Western Digital external drive is recognized on USB, but not recognized in 'my computer\ explorer' or autorun.
  This means that I can make a right click on the bar at the bottom right and 'safely remove hardware, still not displayed in the Explorer.
  I did everything I can to make this work, without result.
  Now what?

  Thank you.

  Try these:

  1 see if his watch in computer management, you might just have to assign a drive letter.
  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  2 try it on another computer, if its does not work, try to replace the cable with a good known working cable.

  3. open the Device Manager, see if there is an unknown device under Bus USB controllers, do a right-click and then uninstall it. If this does not work uninstall everything under USB controllers then reboot, they should put it back.

  4 run Fix it.
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  5 see this thread:
  Windows Vista device not recognized USB
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Windows-Vista-USB-device-not-recognized/58fa364a-6faf-44B8-9821-7f6eb4873da2