external Mac backup (partitioned) do not pick up

Similar Questions

• External HD fat32 partition is not mounted

  I've updated to Yosemite to El Capitan 10.11.2. My external hard drive has 2 partitions, 1 used for Time Machine, the other partition formatted in Fat32.

  Everything works fine so far.

  I had to make some adjustments in SIP (csrutil toggle) to get my wifi working. All ok again.

  After a few days without problems, I have updated to 10.11.3. The partition of Time Machine is fine, but the Fat32 partition rises no more.

  In Bootcamp Windows, the fat32 partition is mounted works ok.

  On another external hard drive, I still have El Capitan 10.11.2, when I boot this disk partition Fat32 works well again. I drive repair, etc.

  When I start again from El Capitan 10.11.3 the Fat32 partition is not recognized, is not accessible. USB drives in Fat32 are not too recognized.

  SIP clear has no help.

  All this seems to be related to the SIP, kext of unsigned drivers.

  Adjusted recovery csrutil Terminal, mode, enabled - no kext

  Now everything works fine, including my wifi dongle.

  I'll try to find the updated drivers for my WD drive.

• Why my computer will not pick up my external hard drive?

  Why my computer will not pick up my external hard drive?
  using Windows 7 sp1

  Original title: usb

  Hello Fred,.

  Windows 7 sometimes has trouble recognizing external drives connected to the USB ports. There are a number of possible corrections for this.

  1. make sure you that the USB port in question works with another device, that you know works. For example, take a mouse that you know doesn't work and plug it into the USB port is connected. The mouse still works? If Yes, go to #2.

  2 do a reset power coercive.

  1. Unplug the power cord. Then (on a laptop) remove the battery.
  2. Unplug all USB devices.
  3. Leave it alone - don't connect or reconnect the devices for several minutes.
  4. After several minutes plug the power supply cord.
  5. Then install the battery.
  6. Turn on the computer and restart as normal without plug any USB device.
  7. Connect your devices one at a time and let them install as usual.

  The external hard drive works now? If not, go to #3.

  3. I have and others have used an application of part 3, the freeware Aomei Partition Wizard, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link). Once installed, you need only browse the external drive and select it, then click Properties. That's all; simply choose the drive is enough to get the drive recognized by Windows 7, no formatting required.

  I would like to know if one of these methods works for you. After back here with your results.

  Kind regards

  BearPup

• Bootcamp does not read my Mac OS partition

  I have not used Bootcamp for awhile but today I need to work on windows, it works fine but when I try to access my files on the Mac OS partition, it is said that it can not read and it must be formatted, but it is not damaged or something like that...

  How can I fix it? I serchead for some updates, but I've not found anything.

  Mac OSX, El Capitan, Bootcamp 6.0, Windows 10.

  If OS X Terminal shows all the outputs for the following command.

  Cs diskutil list

  so you can not read OS X files from Windows. There may be a workaround solution, if you post production.

• Windows 7 backup and restore not recognizing external hard drives

  My laptop recognizes the drives external hard and other storage devices and I can read and manually copy files, etc for them. But the backup and restore told me that nothing is connected when I try to run it. Also, when I connect the external hard drive to a USB port, the menu that is displayed does not include the option of backup of the device just connect. Is there a setting I need to change in the backup and restore program? Or is there another solution that everyone is aware of it please?

  Hi Sally,

  Thanks for posting your query in Microsoft Community.

  I understand that the backup and restore does not recognize the external hard drive, but Windows doesn't. I'll be happy to help you with your query. Let me ask you;

  1. Is - this happy with all external hard drives or individual?
  2. What kind of backup are trying to create, auto or manual?
  3. You did it recently no specific changes in the computer?

  There may be several reasons why backup & restore does not recognize the external hard drive. Let's check out the steps below.

  Step 1: Connect the device to a USB (Universal Serial Bus) and a different test.

  Step 2: You can check if the services responsible for the backup of restoration & work or not.

  Volume Shadow Copy and backup of Windows service.

  To check the services, you can follow the procedure.

  (a) click Start.

  (b) in the Search tab, type Services.msc , and then press Efriendship.

  (c) now in the services window, locate Windows Backup service and Volume Shadow Copy services. Check if they are started.

  Note: Check the services separately, and then close the Services window.

  Step 3: Run the next Fixit and check if the disc is recognized.

  Click here to launch the Fixit.

  Step 4: You can try to temporarily disable the security software of the computer and check with the question. Later, re-enable the security software.

  See: , disable the anti-virus software

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Can not backup on external hard drive - "snapshot could not be created...» »

  Cannot back up the external hard drive "snapshot could not be created, please check the VSS application log and the PSP" "details - the shadow copy provider had an error" error code «ox81000019» I want to buy a new laptop, but how can I transfer all of the existing computer if I can't do a backup?

  As you go only to transfer data from one to the other files, here's a good option...

  Remove the old hard drive and connect it on the new computer using a USB to SATA connector like this...

  http://www.TigerDirect.ca/applications/SearchTools/item-details.asp?EdpNo=3276554&CATID=11527

  It is a very useful device to have some kicking around when you need to get data on a drive that does more boot.

  You must get permission to access folders on the old disk to the new computer and this is how you do it.

  Download the zip on the site below...

  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

  .. and it is there that find the link to the zip on the site...

  

  When you run the zip file, it places a new item in the right click menu called 'Take Ownership'

  To use it, you highlight the file or the folder on which you want the property, right click and select take ownership.

  Then a window will appear and many data authorizations through pretty quickly. When permissions have been granted, the window will close and you will be able to easily access data in the file or the first selected folder...

• How can I load my photoshop CS6 cd to a new Macbook that has no cd slot and does not support the cd drive external mac.

  How can I load photoshop CS6 on a new macbook, which doesn't have a cd slot and does not support the cd drive external mac? I have the original cd of the program.

  Jake

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• 12 elements Photoshop on my other Mac having recently had not smashed, new no CD player. How do we install the elements with my product key? Buying an external CD drive is not an option at the moment after the fork on the 2500 for the new Mac...

  12 elements Photoshop on my other Mac having recently had not smashed, new no CD player. How do we install the elements with my product key? Buying an external CD drive is not an option at the moment after the fork on the 2500 for the new Mac...

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5.6| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1)

  Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1) in order to prepare for Sierra

  I tried safe mode > disk utility, which took a lot of time and the disc seems to be OK.

  Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them.

  -What do you mean by? "Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them."?

  Did you delete anything?

  -The Mac can't you start mode (boot with the SHIFT key) safe?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• My Windows 8 partition does not appear

  Hello

  I have a problem with my macbook pro (early 2011) which I hope someone can help me with.  I tried researching the issue on mine and have not found anything that fits my specific situation.  I consider myself a little above the average user and do not have any formal education in computers.

  I had partitioned macbook brother previously with windows 7 and had no real problems.  I had looked at the walkthroughs on youtube and forums.  It was a year ago.  Last week I decided I want to partition my macbook so that I could use windows.  My boyfriend already has a version of windows 8 (64-bit) that had not been used, so I assumed that it would be nice to use it.  I carelessly did not saved my computer.  I used the boot camp assistant who has two boxes to check with the download of the last support Windows of Apple options and install Windows 7 or later.  I did both, which prompted me to plug in a USB key, I did.  When he was done download Windows support, it prompted me to install the cd that I used for the installation, I did, the 64-bit windows 8.  Then it prompted me to choose how I wish the windows partition.  I chose the option to divide it into equal parts, if I remember correctly out to be about 159 GB for storage remaining on my mac and about 159 GB passes to the new partition of windows.  At some point the computer restarted and I had the option to accept the terms and agreements for Windows and I did, and then he invited me for a product key, I got in.  I had options for disk 0, 1, 2, etc. and the correlation of numbers for partitions.  When I'd done it before if I remember correctly, one of the options should have considered something like "disk 1 Partition 3: BOOTCAMP" and I think that I would have a few steps after this formatting including it.  But the bootcamp partition has not showing as an option.  I decided to restart my Mac and remove the partition and start again when I had someone to help me.

  The problem is that I can't delete the partition because its does not appear anywhere on my mac, I can see.  I tried to use boot camp again to remove it, but he gave me the same guests as if I had just started.  I also tried to go to disk utility and it does not appear there either.  I also noticed that the approximate amount of GB I assigned to the windows partition always took to the top of this memory.  Instead of having the original number of GB of free space on my mac, it says now I 159,84 Go 85,87 Go free.  When I tried Windows partition using boot camp just to see what he would say, the corresponding figures having only 85,87 GB to divide between mac and windows.  After looking to the top of the information on my mac, the only thing I've noticed showing how much storage I had initially is entering the system report and selecting storage and see what is called the logical volume group which has 319,21 GB of which 159.02 is free, which is the number of the partition that I did.  But I have no idea if it is still relevant or even isn't a logical volume group.  I should have saved my computer and should have looked more into it before plunging blindly, but now that I have, I was hoping if anyone had any idea of what could have happened or what I could have done wrong.  The only solution I've come across is my current computer backup and reformatting of my mac.  I would try to avoid this if its possible but will if I have to.

  I apologize for the wordy explanation.  I used OS X El Capitan when I made the partition, and I updated after I made the partition hoping it might help somehow, but there is no change.  If more information is needed or if images are necessary, I would be happy to do so.  Thanks for your time.

  Other information:

  OS X El Capitan 10.11.3 version

  MBP 13, in early 2011

  Intel Core i5 to 2.3 GHz processor

  4 GB 1333 MHz DDR3 memory

  Graphics Intel HD Graphics 3000 384

  Wizard Boot Camp, Version 6.0.1 (522)

  Can you post the output of the following commands in OS X Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• external hard drive partition in disk utility impossible

  on El Capitan, disk utility does not a new external hard drive partitioning.

  When is this corrected?  Is there a work-around.

  With I TB seagate drive and I cannot partition?  It is not useful.

  Marilyn

  Mac mini end of 2014 2.6 Ghz Intel core i 5

  8GB memory

  El Capitan

  Of course, it does.

  Select the drive:

  

  Set how many partitions:

  

  Click on the Add [+] button once for each partition that you want to add. You can set the size using the size field.

  Before you start to complain about something, it would be wise to get your facts straight.

• Backup partition is red

  I have a HP Pavilion P7 - 1037c. I just did the backup on a second external drive. Now when I go on the icon my computer on the desktop different disks are OK except the backup partition. The line shows how much it is red. What does that mean? Thank you!

  ticketplease wrote: I have a HP Pavilion P7 - 1037c. I just did the backup on a second external drive. Now when I go on the icon my computer on the desktop different disks are OK except the backup partition. The line shows how much it is red. What does that mean? Thank you!

  Hello ticketplease, restore partition d: the factory is in fact not a disc but a partition on the hard drive, just like the C: partition.

  The D: partion is designed to be used only for the HP recovery restore procedure. It should never be used as a drive backup (partition), where all the files would be added to this partition.

  When Windows recognize any partition which becomes full of data, by default, he colored the Red score to alert the user that the partition is larger.

  You try to use Windows Explorer and see if you can identify the files that have been added to the D: partition and deleted these files to a different location. It is not possible to determine these added files.

  The only way to resolve this problem if you cannot identify and delete files added, would be to perform a procedure to restore HP recovery that wipe the hard drive and reinstall the original software included with the system.

  You would need to make a backup of any important data before you performed the restore HP recovery procedure.

• Import of PSE9 Win to PSE9 Mac backup

  Hello

  I was just having fun with my new Mac when I tried to import backup edition of Windows 9.0 PSE.

  Version Mac said that "there is no correct backup hard disk!

  The backup was made a few minutes before with version 9.0 of PSE.

  The catalogs of the victory and the Mac version are not completely compatible?

  All pictures are on an external hard drive. The PSE catalog is on the computer - but where? I tried to copy the catalog file only. But I have not found it. A does anyone know where to find the catalog file in Win Vista only?

  Now, how could I bring my catalog based on Win or the backup of the version of PSE - Win for my new Mac?

  Thanks for your help!

  They are compatible, but there is a witch hunt. You must find the .tly, not the whole file and point to restore.

  More details here:

  http://barbarabrundage.com/2010/10/07/moving-a-catalog-from-Windows-to-Mac/

  EDIT try not to move the catalog separately. It does not work.

• question about a new external hard drive partitioning

  I just bought a TB G-Technology G 4 USB 3.0 drive to replace my old Lacie which is way to small.  It has served me well.

  I Google search on the net and research here in the discussions, I should create partitions, and if so, how, a few observations are in each article thread or by email.  A reason to partition (actually more than one partition) is so we can have a section for our time Machine backups, and for a section where we want to save our data backup and one for our user data?  I have not seen a clear statement on what might be the 'data', or what might be the 'user data '.  And if the time machine is backed up, is it NOT back up my data files?

  In order to unravel how the partitions I should create in my 4 TB Ex HD, can someone help me better understand what I should and should not save in time machine?  And if I choose to NOT include it in my Time Machine backup, why would I use a partition do it to, in order to save manually?  I do not pretend that it sounds stupid, I'm not clear on what 'it' is and what info I use to make the best decision for my use.

  Thanks a lot for any wisdom you could share with me.

  Michelle

  Have a Time Machine backup partition on the same drive as your data is a stupid backup plan. Since the main cause of data loss is disk failure to have the backup on the same disk as the means of data when the wrong road, you lose everything.

  At Time Machine backup. You never know what data you will lose.

  I suggest that you give up your plan to make the Time Machine backups on the same drive as the data. You need another player for that.

• Bootcamp partition is not as boot drive, after running bootcamp to install Windows 10 on MacbookPro 15 "El Capitan running

  Hello

  I'm trying to install 10 Windows on my Macbook Pro. I followed this guide, but I am stuck between steps 3 and 4. In disk utility, I see that the bootcamp partition is created, but it does not appear as boot drive. I also tried to start my mac while pressing the option key, but still it will not show.

  See below for a screenshot that shows the current state of my machine.

  

  

  

  How can I continue to install 10 Windows on my Mac?

  Your BOOTCAMP partition internal not yet have Windows installed on it.  If you're between steps 3 and 4 (the installation procedure standard), your, assistant Boot Camp should automatically rebooting your computer after partitioning, from the installation media (Windows 10 CD), you must have created.  I assume that you already have a Windows 10 installation disk.  Make sure that the disc is inserted when you first enter assistant Boot Camp and you let the computer restart on its own.

  Apple instructions are a bit vague (somehow I'm not surprised).

  Watch (time code 04:26 - 09:15) in next video for instructions (https://www.youtube.com/watch?v=1SxA_OsPEgk).

  Good luck.