External ringer on Port FXS VoIP phone w / call Mgr 8.6
Hello
I'm doing an external Bell at the same time when a Cisco VoIP phone is called. The environment in which we are is very hard and the ringtone was great before, we have implemented VoIP.
I have the external Bell connected to a FXS port out of my 2800 router. When I call the number I have on the other hand, it sounds. I have assigned the same number to a VoIP Cisco Call Manager phone, but it sounds only if I have the 'destination-number 9195551212' removed from the FXS port.
I looked for answers/ideas on the Board and found that some said and use the stcapp option to set the maximum option to 2 or more on the number in the call manager. However, it made no difference; I can have either the Bell, or the number - but not both.
Anyone have any ideas?
voice pots Dial-peer 502
Description external Bell
preference 1
destination-model 9195551212 *.
incoming called-number.
port 0/1/2
!
* NOTE: Number changed for example.
Thank you!
Configure the port in SCCP, instead of H.323 mode at this time (search)
Mark CUCM as a analofport device.
Configure a shared on the device line and an IP phone.
Both will ring at the same time, done.
Tags: Cisco Support
Similar Questions
-
Configure (fxs) analog phones with Sip trunk
Hi all
IS - this configuration FXS possiple to knit on SIP TRUNK? I HAVE 16 FXS ports and voip gateway 2921 cisco.
Configuring fxs to work with her?
any help thanks.
Is there a PBX at stake here, i.e. CUCM or CME?
In both cases, you have set good dial-peers to point to the FXS ports to match the destination of the SIP trunk, which is pretty simple.
-
Port FXS (telephone) with H323
Hi all
Can someone me say what the basic setup and step by step to create a port fxs (telephone) with h323 in router 3900 series?
And the configured analog phone can call the ip phone registered with cucm?
Thank anyway.
Take a look at the following document - http://www.cisco.com/c/en/us/td/docs/ios/voice/dialpeer/configuration/gu...
Doc contains a necessary example of dial peers.
Brandon
-
you wonder how to stop my iPad to ring when I get a phone call on my iPhone
you wonder how to stop my iPad to ring when I get a phone call on my iPhone
On your iPhone, go to settings > phone > call on other devices > allow calls on off other devices.
-
My phone is ringing when I get an SMS and it sounds when I get a phone call. I want to know if I can have my phone not ring or vibrate when I get a text Message, only to ring when I get a phone call.
So, I want to:
message text: no ring
phone call: ring
Thank you!
very simple. Go to Configuration - notifications - messages - disable alert sounds
or
Definition of go - Sound - text alerts - set to zero
-
How can I find my external and internal port number
I am trying to access the internet via a live ethernet cable from my router, except the computer im trying to use is new to the House, but is under xp. I also have a laptop which I use to ask these questions, which accesses the internet via a wireless connection. I open 'Internet Properties' and entered my IP address and I am now looking for my external and internal port numbers try to connect. Is it and most easy way? I'm on the right track? Help, please. :)
If you really have a router, then this router should affect your computer all the configuration settings that it needs to connect to the internet (or local) automatically via DHCP. The "TCP/IP properties" correct settings on your computer must be set to "Obtain an IP address automatically" and "Obtain DNS server address automatically". If your router is configured correctly, it will automatically load these settings, such as all you need to do is to connect your computer to your router. If this does not work, then you must download the manual of your router and verify its configuration.
HTH,
JW -
Cisco Ip phone 3905 calls do not
We have 15 Cisco IP phone 3905 on a network with CUCME ver 9.1. Phones record fine and received number EXT. It has tone. But we can't write another post after dialing '1' the tone cut and nothing happens.
This problem has been posted here before. https://supportforums.Cisco.com/discussion/11651601/3905-issue-making-call
Except in my case, I only use 3905 and calls cannot take place. See my sh run and debug errors and debugging ccsip attached massages ccsip. Thanks for your help.
SH run
Building configuration...Current configuration: 7315 bytes
!
! Last configuration change at 13:56:27 UTC Thursday, April 24, 2014 by nim
version 15.2
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname NIM_CME
!
boot-start-marker
boot-end-marker
!
!
logging buffered 51200 warnings
!
No aaa new-model
!
IP cef
!
!
!
no record of conflict ip dhcp
DHCP excluded-address 192.168.0.1 IP 192.168.0.10
DHCP excluded-address IP 192.168.80.1 192.168.80.10
DHCP excluded-address IP 192.168.80.250 192.168.80.255
DHCP excluded-address IP 192.168.70.1 192.168.70.10
DHCP excluded-address IP 192.168.70.250 192.168.70.255
DHCP excluded-address IP 192.168.60.1 192.168.60.10
DHCP excluded-address IP 192.168.60.250 192.168.60.255
DHCP excluded-address IP 192.168.50.1 192.168.50.10
DHCP excluded-address IP 192.168.50.250 192.168.50.255
DHCP excluded-address IP 192.168.40.1 192.168.40.10
DHCP excluded-address IP 192.168.40.250 192.168.40.255
DHCP excluded-address IP 192.168.30.1 192.168.30.10
DHCP excluded-address IP 192.168.30.250 192.168.30.255
DHCP excluded-address 192.168.20.1 IP 192.168.20.10
DHCP excluded-address IP 192.168.20.250 192.168.20.255
IP dhcp excluded-address 192.168.0.250 192.168.0.255
!
dhcp PHCBase IP pool
import all
network 192.168.0.0 255.255.255.0
default router 192.168.0.1
option 150 ip 192.168.0.1
Rental 30
!
dhcp YenegoaLAN IP pool
network 192.168.80.0 255.255.255.0
router by default - 192.168.80.1
lease 10
!
dhcp OronLAN IP pool
network 192.168.70.0 255.255.255.0
router by default - 192.168.70.1
lease 10
!
dhcp EketLAN IP pool
network 192.168.60.0 255.255.255.0
router by default - 192.168.60.1
lease 10
!
dhcp CalabarLAN IP pool
network 192.168.50.0 255.255.255.0
router by default - 192.168.50.1
lease 10
!
dhcp BonnyLAN IP pool
network 192.168.40.0 255.255.255.0
router by default - 192.168.40.1
option 150 ip 192.168.40.1
lease 10
!
dhcp OnneLAN IP pool
network 192.168.30.0 255.255.255.0
default router 192.168.30.1
lease 10
!
dhcp PortOfficeLAN IP pool
network 192.168.20.0 255.255.255.0
router by default - 192.168.20.1
lease 10
!
!
!
no ip domain search
"yourdomain.com" of the IP domain name
No ipv6 cef
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
Crypto pki trustpoint TP-self-signed-2286552849
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2286552849
revocation checking no
rsakeypair TP-self-signed-2286552849
!
!
TP-self-signed-2286552849 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 32323836 35353238 6174652D 3439301E 170 3133 30383230 30353236
33395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 32383635 65642D
35323834 3930819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100B 979 6576 B1DBA804 61398EE7 DFB6E285 AEBE044F 300D381C 1FBC941C 407D
D062F622 47E0A79E 20641E4C CC90F308 8D65DC2C CC475EC3 0A62175E 867366ED
C5B35A90 83090DDF ADDAF4A4 CA49F2C4 7C3421F1 0B4EC5AE D26A0CE9 7DC3CC55
E604A7A2 0AF66F47 66FAF1BA 2A823FD3 EC9AAC89 5FCEDD29 6B2DDCF9 E1C41D9F
010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355 C9B50203
B 551 2304 18301680 1486, 158 90DD3652 93809798 C3311ABE 9EC6263E 09301D 06
03551D0E DD365293 809798 C6263E09 311ABE9E 3 C 300 D 0609 B 04160414 86, 15890
2A 864886 05050003 81810000 2B614A99 9B090B99 3A7F9085 C29503B3 F70D0101
E92AB95A ABD6EED5 E9226AAD 63E60837 FF913665 96D2ECAB 6F6DA306 42751B 49
8CC3EF9B E13C3B49 B2B978AD ABC1A42E EFA8D5EF FC4C9C6A A1662E2D 0C140E5D
5F0B6752 CAEC8E8A 53EB3353 E27A8575 C18381D7 9342773B CB3BCD65 54C0DF25
D629972D 409A2F6D 2C82C541 611A1F
quit smoking
voice-card 0
!
!
!
voip phone service
allow sip to sip connections
Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
SIP
binding control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
Registration Server expires max 1200 min 300
!
!
Global voice registry
FMC of fashion
source-address 192.168.0.1 port 5060
Max - dn 30
Max-pool 25
load of 3905 CP3905.9 - 2-1-0
1 4085251 model numbering plan... extension-length 3
Flash TFTP-path:
text file
create the profile synchronization 0035041805641981
!
Register of voice dn 1
Number 101
name numbers1
label 4085251001
!
Register of voice dn 2
number 102
name telephone2
label 4085251002
!
Register of voice dn 3
number 103
name Phone3
label 4085251003
!
Register of voice dn 4
number 104
name Phone4
label 4085251004
!
vocal range pool 1
Mac ID 7 95. F323. B7B6
type of 3905
Number 1 dn 1
DTMF-relay rtp - nte
!
Register of voice pool 2
Mac ID 7 95. F323. B81D
type of 3905
Number 1 dn 2
DTMF-relay rtp - nte
Cisco password username user2
!
Register of voice pool 3
Mac ID 7 95. F323. BB30
type of 3905
Number 1 dn 3
DTMF-relay rtp - nte
username cisco password user3
!
Register of voice pool 4
Mac ID 7 95. F323. B7B7
type of 3905
Number 1 dn 4
DTMF-relay rtp - nte
Cisco password username user4
!
!
!
!
!
license udi pid CISCO2911/K9 sn FCZ1734609V
HW-module pvdm 0/0
!
!
!
username privilege 15 secret 4 nimout lpMHsjg3v8XIXfjVSuCP0Tf3rTGlWmA/nJHqUqryL7w
username admin privilege 15 secret 4 twCnybukZZA6Z960oKoBqFYi5O74Z5b73d7LIBiSjrY
!
redundancy
!
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE $ 0/0
the IP 192.168.0.1 255.255.255.0
automatic duplex
automatic speed
!
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
address 192.168.20.1 255.255.255.0
!
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
192.168.30.1 IP address 255.255.255.0
!
interface GigabitEthernet0/0.40
encapsulation dot1Q 40
192.168.40.1 IP address 255.255.255.0
!
interface GigabitEthernet0/0.50
encapsulation dot1Q 50
192.168.50.1 IP address 255.255.255.0
!
interface GigabitEthernet0/0.60
encapsulation dot1Q 60
IP 192.168.60.1 255.255.255.0
!
interface GigabitEthernet0/0.70
encapsulation dot1Q 70
IP 192.168.70.1 255.255.255.0
!
interface GigabitEthernet0/0.80
encapsulation dot1Q 80
192.168.80.1 IP address 255.255.255.0
!
interface GigabitEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface GigabitEthernet0/2
no ip address
Shutdown
automatic duplex
automatic speed
!
IP forward-Protocol ND
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
!
!
flash TFTP server: APP3905.9 - 2-1 - 0.zz
flash TFTP server: CP3905.9 - 2-1 - 0.loads
!
control plan
!
!
!
!
!
!
!
profile MGCP default
!
!
!
!
!
access controller
Shutdown
!
!
phone service
No auto-reg ephone
MAX conferences 8-6 win
DN-webedit
transfer full-consult system
!
!
!
Line con 0
password @nimout123
local connection
line to 0
line 2
no activation-character
No exec
preferred no transport
transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
privilege level 15
password @nimout123
local connection
transport input telnet ssh
line vty 5
privilege level 15
password @nimout123
local connection
transport input telnet ssh
line vty 6 15
privilege level 15
local connection
transport input telnet ssh
!
Scheduler allocate 20000 1000
Master of NTP
!
end#debug ccsip error
Trouble shooting call SIP is enabled
NIM_CME #.
NIM_CME #.
* 24 apr 11:08:36.251: //-1/9D9F100280CC/SIP/Error/ccsip_ipip_media_forking_updat
e_preferred_codec:
MF: Not a forked leg SIP...
SIP: (68) attribute mid, instance of level 1 1 not found.
* Apr 24 11:08:36.251: / / 68/9D9F100280CC/SIP/error/sipSPIStreamTypeAndDtmfRelay:No voice codec and dtmf-relay correspondence
* Apr 24 11:08:36.251: / / 68/9D9F100280CC/SIP/error/sipSPIDoAudioNegotiation:
Failure of the negotiations in media for m-line 1
* Apr 24 11:08:36.251: / / 68/9D9F100280CC/SIP/error/sipSPIDoMediaNegotiation:No valid fax or audio stream
* Apr 24 11:08:36.251: / / 68/9D9F100280CC/SIP/error/sipSPIHandleInviteMedia:
Failure of the negotiation of media for an incoming call
* Apr 24 11:08:36.251: / / 68/9D9F100280CC/SIP/error/sipSPIContinueNewMsgInvite:
Unacceptable media for INVITE
* 24 apr 11:08:39.303: //-1/9F70C2BB80D0/SIP/Error/ccsip_ipip_media_forking_updat
e_preferred_codec:
MF: Not a forked leg SIP...
SIP: (69) attribute mid, instance of level 1 1 not found.
* Apr 24 11:08:39.303: / / 69/9F70C2BB80D0/SIP/error/sipSPIStreamTypeAndDtmfRelay:No voice codec and dtmf-relay correspondence
* Apr 24 11:08:39.303: / / 69/9F70C2BB80D0/SIP/error/sipSPIDoAudioNegotiation:
Failure of the negotiations in media for m-line 1
* Apr 24 11:08:39.303: / / 69/9F70C2BB80D0/SIP/error/sipSPIDoMediaNegotiation:No valid fax or audio stream
* Apr 24 11:08:39.303: / / 69/9F70C2BB80D0/SIP/error/sipSPIHandleInviteMedia:
Failure of the negotiation of media for an incoming call
* Apr 24 11:08:39.303: / / 69/9F70C2BB80D0/SIP/error/sipSPIContinueNewMsgInvite:
Unacceptable media for INVITE
* 24 apr 11:08:42.871: //70/A191CD1180D4/SIP/Error/ccsip_spi_register_incoming_re
gistration:
No entry found in reg number Table for 104
* 24 apr 11:08:47.803: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_delete_from_cc_call_
id_table:
Entry not found for the search key* 24 apr 11:08:47.803: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_delete_from_mac_tabl
e:
BCR with mac [7c95f323b7b7] has been deleted
* Apr 24 11:08:47.803: POOL - 4 VOICE REGISTER has not been saved. Name: SEP7C95F323B7
B7 IP:192.168.40.11 DeviceType:Phone* 24 apr 11:08:47.803: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_ipip_PassthruContentCon
tainerFreeHelper:
ContentQ null - output
* 24 apr 11:08:47.803: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_register_handle_e164_unr
registration:
SIP registry Error: Invalid args in unreg
* 24 apr 11:08:47.803: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_register_handle_e164_unr
registration:
SIP registry Error: Invalid args in unreg
* 24 apr 11:09:20.891: //-1/B83B30D980D5/SIP/Error/ccsip_ipip_media_forking_updat
e_preferred_codec:
MF: Not a forked leg SIP...
SIP: (71) attribute mid, instance of level 1 1 not found.
* Apr 24 11:09:20.895: / / 71/B83B30D980D5/SIP/error/sipSPIStreamTypeAndDtmfRelay:No voice codec and dtmf-relay correspondence
* Apr 24 11:09:20.895: / / 71/B83B30D980D5/SIP/error/sipSPIDoAudioNegotiation:
Failure of the negotiations in media for m-line 1
* Apr 24 11:09:20.895: / / 71/B83B30D980D5/SIP/error/sipSPIDoMediaNegotiation:No valid fax or audio stream
* Apr 24 11:09:20.895: / / 71/B83B30D980D5/SIP/error/sipSPIHandleInviteMedia:
Failure of the negotiation of media for an incoming call
* Apr 24 11:09:20.895: / / 71/B83B30D980D5/SIP/error/sipSPIContinueNewMsgInvite:
Unacceptable media for INVITE
* 24 apr 11:09:24.535: //-1/BA67393580D9/SIP/Error/ccsip_ipip_media_forking_updat
e_preferred_codec:
MF: Not a forked leg SIP...
SIP: (72) attribute mid, instance of level 1 1 not found.
* Apr 24 11:09:24.535: / / 72/BA67393580D9/SIP/error/sipSPIStreamTypeAndDtmfRelay:No voice codec and dtmf-relay correspondence
* Apr 24 11:09:24.535: / / 72/BA67393580D9/SIP/error/sipSPIDoAudioNegotiation:
Failure of the negotiations in media for m-line 1
* Apr 24 11:09:24.535: / / 72/BA67393580D9/SIP/error/sipSPIDoMediaNegotiation:No valid fax or audio stream
* Apr 24 11:09:24.535: / / 72/BA67393580D9/SIP/error/sipSPIHandleInviteMedia:
Failure of the negotiation of media for an incoming call
* Apr 24 11:09:24.535: / / 72/BA67393580D9/SIP/error/sipSPIContinueNewMsgInvite:
Unacceptable media for INVITE
* 24 apr 11:09:53.307: //-1/CB8CDFE280DD/SIP/Error/ccsip_ipip_media_forking_updat
e_preferred_codec:
MF: Not a forked leg SIP...
SIP: (73) attribute mid, instance of level 1 1 not found.
* Apr 24 11:09:53.307: / / 73/CB8CDFE280DD/SIP/error/sipSPIStreamTypeAndDtmfRelay:No voice codec and dtmf-relay correspondence
* Apr 24 11:09:53.307: / / 73/CB8CDFE280DD/SIP/error/sipSPIDoAudioNegotiation:
Failure of the negotiations in media for m-line 1
* Apr 24 11:09:53.307: / / 73/CB8CDFE280DD/SIP/error/sipSPIDoMediaNegotiation:No valid fax or audio stream
* Apr 24 11:09:53.307: / / 73/CB8CDFE280DD/SIP/error/sipSPIHandleInviteMedia:
Failure of the negotiation of media for an incoming call
* Apr 24 11:09:53.307: / / 73/CB8CDFE280DD/SIP/error/sipSPIContinueNewMsgInvite:
Unacceptable media for INVITEebug ccsip?
All activate SIP all traces of debugging
the calls allow CCSIP SPI called backtrace
The trace debugging DHCP enable SIP-DHCP
error activate SIP debug trace
Activate SIP events backtrace
function activate SIP debug trace
Info to activate SIP info trace debugging
Activate SIP media backtrace
messages enable CCSIP SPI debug trace
preauthentication activate SIP preauthentication debugging traces
Activate CCSIP SPI States debug trace
definition of translation activate SIP debug trace
transport transport activate SIP, traces of debugging
Verbose Enable verbose modeEvent ccsip NIMASA_CME #debug
Events to call SIP tracing is enabled
NIMASA_CME #.
April 24, 12:23:59.435: / / 167/25A61E588123/SIP/event/Session-Timer/sipSTSLMain: Eve
NT: E_STSL_SESSION_REFRESH_REQ
April 24, 12:23:59.435: / / 167/25A61E588123/SIP/event/Session-Timer/sipSTSLMain: dir
: method 2, p. 102, resp_code:0, container: 3DAA7E00
Apr 24 12:23:59.435: //167/25A61E588123/SIP/Event/Session-Timer/sipSTSLPrintTDCo
ntainer: Peer-Event: E_STSL_LEG_BY_LEG, SE value: 0, SE reminder: no, Min - SE Va
read: 1800, flags: 2000
April 24, 12:23:59.435: / / 167/25A61E588123/SIP/event/Session-Timer/sipSTSLMain: Eve
NT: E_STSL_SESSION_REFRESH_RESP
April 24, 12:23:59.435: / / 167/25A61E588123/SIP/event/Session-Timer/sipSTSLMain: dir
: method 1, p. 102, resp_code:488, container: 3DAA8220
April 24, 12:24:04.583: / / 168/28B8405A8127/SIP/event/Session-Timer/sipSTSLMain: Eve
NT: E_STSL_SESSION_REFRESH_REQ
April 24, 12:24:04.583: / / 168/28B8405A8127/SIP/event/Session-Timer/sipSTSLMain: dir
: method 2, p. 102, resp_code:0, container: 3DAA8E80
Apr 24 12:24:04.583: //168/28B8405A8127/SIP/Event/Session-Timer/sipSTSLPrintTDCo
ntainer: Peer-Event: E_STSL_LEG_BY_LEG, SE value: 0, SE reminder: no, Min - SE Va
read: 1800, flags: 2000
April 24, 12:24:04.583: / / 168/28B8405A8127/SIP/event/Session-Timer/sipSTSLMain: Eve
NT: E_STSL_SESSION_REFRESH_RESP
April 24, 12:24:04.583: / / 168/28B8405A8127/SIP/event/Session-Timer/sipSTSLMain: dir
: method 1, p. 102, resp_code:488, container: 3DAB0BF8
April 24, 12:24:07.155: / / 169/2A401975812B/SIP/event/Session-Timer/sipSTSLMain: Eve
NT: E_STSL_SESSION_REFRESH_REQ
April 24, 12:24:07.155: / / 169/2A401975812B/SIP/event/Session-Timer/sipSTSLMain: dir
: method 2, p. 102, resp_code:0, container: 3DAA7F08
Apr 24 12:24:07.155: //169/2A401975812B/SIP/Event/Session-Timer/sipSTSLPrintTDCo
ntainer: Peer-Event: E_STSL_LEG_BY_LEG, SE value: 0, SE reminder: no, Min - SE Va
read: 1800, flags: 2000
April 24, 12:24:07.155: / / 169/2A401975812B/SIP/event/Session-Timer/sipSTSLMain: Eve
NT: E_STSL_SESSION_REFRESH_RESP
April 24, 12:24:07.155: / / 169/2A401975812B/SIP/event/Session-Timer/sipSTSLMain: dir
: method 1, p. 102, resp_code:488, container: 3DAA8220
April 24, 12:24:11.595: / / 170/2CE63252812F/SIP/event/Session-Timer/sipSTSLMain: Eve
NT: E_STSL_SESSION_REFRESH_REQ
April 24, 12:24:11.595: / / 170/2CE63252812F/SIP/event/Session-Timer/sipSTSLMain: dir
: method 2, p. 102, resp_code:0, container: 3DAB0CA8
Apr 24 12:24:11.595: //170/2CE63252812F/SIP/Event/Session-Timer/sipSTSLPrintTDCo
ntainer: Peer-Event: E_STSL_LEG_BY_LEG, SE value: 0, SE reminder: no, Min - SE Va
read: 1800, flags: 2000
April 24, 12:24:11.595: / / 170/2CE63252812F/SIP/event/Session-Timer/sipSTSLMain: Eve
NT: E_STSL_SESSION_REFRESH_RESP
April 24, 12:24:11.595: / / 170/2CE63252812F/SIP/event/Session-Timer/sipSTSLMain: dir
: method 1, p. 102, resp_code:488, container: 3DAB0BF8
NIMASA_CME #undebug ccsip events
Events to call SIP tracing is disabled
NIMASA_CME #.
Error ccsip NIMASA_CME #debug
Trouble shooting call SIP is enabled
NIMASA_CME #.
Apr 24 12:24:46.175: //-1/4182B07D8133/SIP/Error/ccsip_ipip_media_forking_update
_preferred_codec:
MF: Not a forked leg SIP...
SIP: (171) of the mid, found 1 1 level instance attribute.
April 24, 12:24:46.175: / / 171/4182B07D8133/SIP/error/sipSPIDoAudioNegotiation:
Failure of the negotiations in media for m-line 1
April 24, 12:24:46.175: / / 171/4182B07D8133/SIP/error/sipSPIDoMediaNegotiation:No valid fax or audio stream
April 24, 12:24:46.175: / / 171/4182B07D8133/SIP/error/sipSPIHandleInviteMedia:
Failure of the negotiation of media for an incoming call
April 24, 12:24:46.175: / / 171/4182B07D8133/SIP/error/sipSPIContinueNewMsgInvite:
Unacceptable media for INVITE
Apr 24 12:24:50.227: //-1/43EC5D8E8137/SIP/Error/ccsip_ipip_media_forking_update
_preferred_codec:
MF: Not a forked leg SIP...
SIP: (172) the mid not found 1 1 level instance attribute.
April 24, 12:24:50.227: / / 172/43EC5D8E8137/SIP/error/sipSPIDoAudioNegotiation:
Failure of the negotiations in media for m-line 1
April 24, 12:24:50.227: / / 172/43EC5D8E8137/SIP/error/sipSPIDoMediaNegotiation:No valid fax or audio stream
April 24, 12:24:50.227: / / 172/43EC5D8E8137/SIP/error/sipSPIHandleInviteMedia:
Failure of the negotiation of media for an incoming call
April 24, 12:24:50.227: / / 172/43EC5D8E8137/SIP/error/sipSPIContinueNewMsgInvite:
Unacceptable media for INVITE
Apr 24 12:24:52.031: //-1/45003EE4813B/SIP/Error/ccsip_ipip_media_forking_update
_preferred_codec:
MF: Not a forked leg SIP...
SIP: (173) of the mid, found 1 1 level instance attribute.
April 24, 12:24:52.031: / / 173/45003EE4813B/SIP/error/sipSPIDoAudioNegotiation:
Failure of the negotiations in media for m-line 1
April 24, 12:24:52.031: / / 173/45003EE4813B/SIP/error/sipSPIDoMediaNegotiation:No valid fax or audio stream
April 24, 12:24:52.031: / / 173/45003EE4813B/SIP/error/sipSPIHandleInviteMedia:
Failure of the negotiation of media for an incoming call
April 24, 12:24:52.031: / / 173/45003EE4813B/SIP/error/sipSPIContinueNewMsgInvite:
Unacceptable media for INVITECCSIP DEBUG MESSAGES
Apr 24 14:18:11.086: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Envoy:
SIP/2.0 488 Media is not Acceptable
Via: SIP/2.0/UDP 192.168.0.13:5060; rport; branch = z9hG4bKPjmYBG2kj6Ljizpy4D3JhcmoM
f0RhNAekv
From: "telephone1" <> [email protected]/ * / >; tag = 3b114524-60cb-4f40-97ee-21dd2016e031
To: sip:[email protected]/ * /; tag = 138F9F8-451
Date: Thu, April 24, 2014 14:18:11 GMT
Call ID: 4dd4fcb7-662c-4e25-8836-feaeeb979f81
CSeq: INVITE 16958
Allow-events: telephone-event
WARNING: 304 192.168.0.1 "Media type (s) not available.
Reason: Q.850; cause = 65
Server: Cisco-SIPGateway/IOS-15.2.4.M4
Content-Length: 0Apr 24 14:18:11.102: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP ACK:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.0.13:5060; rport; branch = z9hG4bKPjmYBG2kj6Ljizpy4D3JhcmoM
f0RhNAekv
Max-Forwards: 70
From: "telephone1" <> [email protected]/ * / >; tag = 3b114524-60cb-4f40-97ee-21dd2016e031
To: sip:[email protected]/ * /; tag = 138F9F8-451
Call ID: 4dd4fcb7-662c-4e25-8836-feaeeb979f81
CSeq: ACK 16958
Content-Length: 0Apr 24 14:20:40.786: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
GUEST sip:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.0.12:5060; rport; branch = z9hG4bKPjvoVJeyhxpOvfwgDDywmTGiU
keV.m - NL1
Max-Forwards: 70
From: 'Téléphone2' <> [email protected]/ * / >; tag = 700813bc-4b2d-47a5-8ea5-1e8aec850a3c
To: sip:[email protected]/ * /.
"Contact: <> [email protected]/ * /: 5060 >; + sip.instance = '.<>
00-0000-0000-7c95f323b81d > '; + u.sip! DeviceName.CCM.Cisco.com = "SEP7C95F323B81D"; + u
. SIP! model.ccm.cisco.com = "592"
Call ID: dce6e9c3-0dab-4c9f-86a6-56fe383c60e0
CSeq: 1575 INVITE
Allow: PRACK, GUEST, ACK, BYE, CANCEL, update, SUBSCRIBE, NOTIFY, REFER, MESSAG
E, OPTIONS
User-Agent: Cisco-CP3905/9.2.1
Support: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-c
ISCO-ServiceUri,X-Cisco-escapecodes,X-Cisco-Service-Control,X-Cisco-monrec,X-CIS
Co-config,X-Cisco-SIS-4.0.0,X-Cisco-xsi-7.0.1
Expires: 180
Accept: application/sdp
Allow-events: kpml, dialog box
Remote-Party-ID: 'Téléphone2'<>[email protected]/ * /: 5060 >; intimacy = off
Content-Type: application/sdp
Content-Length: 292v = 0
o =-2208994977 2208994977 IN IP4 192.168.0.12
s = FOXPHONE
c = in IP4 in 192.168.0.12
t = 0 0
a = X - nat:0
m = audio RTP/AVP 0 8 18 111 16392
a = rtpmap:0 PCMU/8000
a = rtpmap:8 PCMA/8000
a G729/8000 rtpmap:18 =
a = annex b fmtp:18 = yes
a = sendrecv
a rtpmap:111 telephone-event/8000 =
a = fmtp:111 0-15Apr 24 14:20:40.790: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Envoy:
SIP/2.0 488 Media is not Acceptable
Via: SIP/2.0/UDP 192.168.0.12:5060; rport; branch = z9hG4bKPjvoVJeyhxpOvfwgDDywmTGiU
keV.m - NL1
From: 'Téléphone2' <> [email protected]/ * / >; tag = 700813bc-4b2d-47a5-8ea5-1e8aec850a3c
To: sip:[email protected]/ * /; tag = 13B42C0-812
Date: Thu, April 24, 2014 14:20:40 GMT
Call ID: dce6e9c3-0dab-4c9f-86a6-56fe383c60e0
CSeq: 1575 INVITE
Allow-events: telephone-event
WARNING: 304 192.168.0.1 "Media type (s) not available.
Reason: Q.850; cause = 65
Server: Cisco-SIPGateway/IOS-15.2.4.M4
Content-Length: 0Apr 24 14:20:40.806: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP ACK:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.0.12:5060; rport; branch = z9hG4bKPjvoVJeyhxpOvfwgDDywmTGiU
keV.m - NL1
Max-Forwards: 70
From: 'Téléphone2' <> [email protected]/ * / >; tag = 700813bc-4b2d-47a5-8ea5-1e8aec850a3c
To: sip:[email protected]/ * /; tag = 13B42C0-812
Call ID: dce6e9c3-0dab-4c9f-86a6-56fe383c60e0
CSeq: 1575 ACK
Content-Length: 0Apr 24 14:22:16.110: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
GUEST sip:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.0.14:5060; rport; branch = z9hG4bKPjT3UaPZ-qfLE2EACrxGcnjqG
noFQuZXi7
Max-Forwards: 70
From: 'Phone3' <> [email protected]/ * / >; tag = 8ce0e16a-Davis-448 b-8d9c-d0b4ad52589f
To: sip:[email protected]/ * /.
"Contact: <> [email protected]/ * /: 5060 >; + sip.instance = '.<>
00-0000-0000-7c95f323bb30 > '; + u.sip! DeviceName.CCM.Cisco.com = "SEP7C95F323BB30"; + u
. SIP! model.ccm.cisco.com = "592"
Call ID: d5ec8dba-bbe3-44ac-9902-0d52b327c514
CSeq: INVITE 16131
Allow: PRACK, GUEST, ACK, BYE, CANCEL, update, SUBSCRIBE, NOTIFY, REFER, MESSAG
E, OPTIONS
User-Agent: Cisco-CP3905/9.2.1
Support: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-c
ISCO-ServiceUri,X-Cisco-escapecodes,X-Cisco-Service-Control,X-Cisco-monrec,X-CIS
Co-config,X-Cisco-SIS-4.0.0,X-Cisco-xsi-7.0.1
Expires: 180
Accept: application/sdp
Allow-events: kpml, dialog box
Remote-Party-ID: 'Phone3'<>[email protected]/ * /: 5060 >; intimacy = off
Content-Type: application/sdp
Content-Length: 292v = 0
o =-2208995063 2208995063 IN IP4 192.168.0.14
s = FOXPHONE
c = IN IP4 192.168.0.14
t = 0 0
a = X - nat:0
m = audio RTP/AVP 0 8 18 111 16388
a = rtpmap:0 PCMU/8000
a = rtpmap:8 PCMA/8000
a G729/8000 rtpmap:18 =
a = annex b fmtp:18 = yes
a = sendrecv
a rtpmap:111 telephone-event/8000 =
a = fmtp:111 0-15Apr 24 14:22:16.114: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Envoy:
SIP/2.0 488 Media is not Acceptable
Via: SIP/2.0/UDP 192.168.0.14:5060; rport; branch = z9hG4bKPjT3UaPZ-qfLE2EACrxGcnjqG
noFQuZXi7
From: 'Phone3' <> [email protected]/ * / >; tag = 8ce0e16a-Davis-448 b-8d9c-d0b4ad52589f
To: sip:[email protected]/ * /; tag = 13CB71C - 8 9
Date: Thu, April 24, 2014 14:22:16 GMT
Call ID: d5ec8dba-bbe3-44ac-9902-0d52b327c514
CSeq: INVITE 16131
Allow-events: telephone-event
WARNING: 304 192.168.0.1 "Media type (s) not available.
Reason: Q.850; cause = 65
Server: Cisco-SIPGateway/IOS-15.2.4.M4
Content-Length: 0Apr 24 14:22:16.126: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP ACK:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.0.14:5060; rport; branch = z9hG4bKPjT3UaPZ-qfLE2EACrxGcnjqG
noFQuZXi7
Max-Forwards: 70
From: 'Phone3' <> [email protected]/ * / >; tag = 8ce0e16a-Davis-448 b-8d9c-d0b4ad52589f
To: sip:[email protected]/ * /; tag = 13CB71C - 8 9
Call ID: d5ec8dba-bbe3-44ac-9902-0d52b327c514
CSeq: ACK 16131
Content-Length: 0Apr 24 14:23:17.418: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
GUEST sip:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjfEwqupP3utIfGrv - WEaaI
hjdCy1q-hM
Max-Forwards: 70
From: 'Phone4' <> [email protected]/ * / >; tag = 93e43cc1-7e69-49ef-899 d-c81bd29eae11
To: sip:[email protected]/ * /.
"Contact: <> [email protected]/ * /: 5060 >; + sip.instance = '.<>
000-0000-0000-7c95f323b7b7 > '; + u.sip! DeviceName.CCM.Cisco.com = "SEP7C95F323B7B7"; +
u.SIP! Model.CCM.Cisco.com = "592"
Call ID: c9eb73ff-f89c-4aad-861d-724af1bd1f36
CSeq: INVITE 27309
Allow: PRACK, GUEST, ACK, BYE, CANCEL, update, SUBSCRIBE, NOTIFY, REFER, MESSAG
E, OPTIONS
User-Agent: Cisco-CP3905/9.2.1
Support: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-c
ISCO-ServiceUri,X-Cisco-escapecodes,X-Cisco-Service-Control,X-Cisco-monrec,X-CIS
Co-config,X-Cisco-SIS-4.0.0,X-Cisco-xsi-7.0.1
Expires: 180
Accept: application/sdp
Allow-events: kpml, dialog box
Remote-Party-ID: 'Phone4'<>[email protected]/ * /: 5060 >; intimacy = off
Content-Type: application/sdp
Content-Length: 294v = 0
o =-2208995137 2208995137 IN IP4 192.168.40.11
s = FOXPHONE
c = IN IP4 192.168.40.11
t = 0 0
a = X - nat:0
m = audio RTP/AVP 0 8 18 111 16388
a = rtpmap:0 PCMU/8000
a = rtpmap:8 PCMA/8000
a G729/8000 rtpmap:18 =
a = annex b fmtp:18 = yes
a = sendrecv
a rtpmap:111 telephone-event/8000 =
a = fmtp:111 0-15Apr 24 14:23:17.422: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Envoy:
SIP/2.0 488 Media is not Acceptable
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjfEwqupP3utIfGrv - WEaaI
hjdCy1q-hM
From: 'Phone4' <> [email protected]/ * / >; tag = 93e43cc1-7e69-49ef-899 d-c81bd29eae11
To: sip:[email protected]/ * /; tag = 13DA698 - 1 25
Date: Thu, April 24, 2014 14:23:17 GMT
Call ID: c9eb73ff-f89c-4aad-861d-724af1bd1f36
CSeq: INVITE 27309
Allow-events: telephone-event
WARNING: 304 192.168.0.1 "Media type (s) not available.
Reason: Q.850; cause = 65
Server: Cisco-SIPGateway/IOS-15.2.4.M4
Content-Length: 0Apr 24 14:23:17.434: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP ACK:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjfEwqupP3utIfGrv - WEaaI
hjdCy1q-hM
Max-Forwards: 70
From: 'Phone4' <> [email protected]/ * / >; tag = 93e43cc1-7e69-49ef-899 d-c81bd29eae11
To: sip:[email protected]/ * /; tag = 13DA698 - 1 25
Call ID: c9eb73ff-f89c-4aad-861d-724af1bd1f36
CSeq: 27309 ACK
Content-Length: 0Apr 24 14:23:19.690: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
GUEST sip:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjfW2oLTIRE62UkXCzpFyuAa
gpbtooQCuv
Max-Forwards: 70
From: 'Phone4' <> [email protected]/ * / >; tag = e8ed6eb5-8653-4154-93ab-1755749c84a6
To: sip:[email protected]/ * /.
"Contact: <> [email protected]/ * /: 5060 >; + sip.instance = '.<>
000-0000-0000-7c95f323b7b7 > '; + u.sip! DeviceName.CCM.Cisco.com = "SEP7C95F323B7B7"; +
u.SIP! Model.CCM.Cisco.com = "592"
Call ID: aa729730-fc15-4fc4-8bee-8d3e9840cc8b
CSeq: 10138 INVITE
Allow: PRACK, GUEST, ACK, BYE, CANCEL, update, SUBSCRIBE, NOTIFY, REFER, MESSAG
E, OPTIONS
User-Agent: Cisco-CP3905/9.2.1
Support: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-c
ISCO-ServiceUri,X-Cisco-escapecodes,X-Cisco-Service-Control,X-Cisco-monrec,X-CIS
Co-config,X-Cisco-SIS-4.0.0,X-Cisco-xsi-7.0.1
Expires: 180
Accept: application/sdp
Allow-events: kpml, dialog box
Remote-Party-ID: 'Phone4'<>[email protected]/ * /: 5060 >; intimacy = off
Content-Type: application/sdp
Content-Length: 294v = 0
o =-2208995139 2208995139 IN IP4 192.168.40.11
s = FOXPHONE
c = IN IP4 192.168.40.11
t = 0 0
a = X - nat:0
m = audio RTP/AVP 0 8 18 111 16390
a = rtpmap:0 PCMU/8000
a = rtpmap:8 PCMA/8000
a G729/8000 rtpmap:18 =
a = annex b fmtp:18 = yes
a = sendrecv
a rtpmap:111 telephone-event/8000 =
a = fmtp:111 0-15Apr 24 14:23:19.694: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Envoy:
SIP/2.0 488 Media is not Acceptable
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjfW2oLTIRE62UkXCzpFyuAa
gpbtooQCuv
From: 'Phone4' <> [email protected]/ * / >; tag = e8ed6eb5-8653-4154-93ab-1755749c84a6
To: sip:[email protected]/ * /; tag = 13DAF78-5 b 0
Date: Thu, April 24, 2014 14:23:19 GMT
Call ID: aa729730-fc15-4fc4-8bee-8d3e9840cc8b
CSeq: 10138 INVITE
Allow-events: telephone-event
WARNING: 304 192.168.0.1 "Media type (s) not available.
Reason: Q.850; cause = 65
Server: Cisco-SIPGateway/IOS-15.2.4.M4
Content-Length: 0Apr 24 14:23:19.706: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP ACK:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjfW2oLTIRE62UkXCzpFyuAa
gpbtooQCuv
Max-Forwards: 70
From: 'Phone4' <> [email protected]/ * / >; tag = e8ed6eb5-8653-4154-93ab-1755749c84a6
To: sip:[email protected]/ * /; tag = 13DAF78-5 b 0
Call ID: aa729730-fc15-4fc4-8bee-8d3e9840cc8b
CSeq: 10138 ACK
Content-Length: 0Apr 24 14:23:21.194: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
GUEST sip:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPj1I0P8BoX0CIMO3qfwTYEWe
y.fSEokHib
Max-Forwards: 70
From: 'Phone4' <> [email protected]/ * / >; tag = d56894bf-896e-42b7-8b69-5da16d2337bc
To: sip:[email protected]/ * /.
"Contact: <> [email protected]/ * /: 5060 >; + sip.instance = '.<>
000-0000-0000-7c95f323b7b7 > '; + u.sip! DeviceName.CCM.Cisco.com = "SEP7C95F323B7B7"; +
u.SIP! Model.CCM.Cisco.com = "592"
Call ID: e472fb51-35f0-4f2c-a84a-f0efd0cf9f2e
CSeq: INVITE 12021
Allow: PRACK, GUEST, ACK, BYE, CANCEL, update, SUBSCRIBE, NOTIFY, REFER, MESSAG
E, OPTIONS
User-Agent: Cisco-CP3905/9.2.1
Support: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-c
ISCO-ServiceUri,X-Cisco-escapecodes,X-Cisco-Service-Control,X-Cisco-monrec,X-CIS
Co-config,X-Cisco-SIS-4.0.0,X-Cisco-xsi-7.0.1
Expires: 180
Accept: application/sdp
Allow-events: kpml, dialog box
Remote-Party-ID: 'Phone4'<>[email protected]/ * /: 5060 >; intimacy = off
Content-Type: application/sdp
Content-Length: 294v = 0
o =-2208995140 2208995140 IN IP4 192.168.40.11
s = FOXPHONE
c = IN IP4 192.168.40.11
t = 0 0
a = X - nat:0
m = audio RTP/AVP 0 8 18 111 16392
a = rtpmap:0 PCMU/8000
a = rtpmap:8 PCMA/8000
a G729/8000 rtpmap:18 =
a = annex b fmtp:18 = yes
a = sendrecv
a rtpmap:111 telephone-event/8000 =
a = fmtp:111 0-15Apr 24 14:23:21.198: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Envoy:
SIP/2.0 488 Media is not Acceptable
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPj1I0P8BoX0CIMO3qfwTYEWe
y.fSEokHib
From: 'Phone4' <> [email protected]/ * / >; tag = d56894bf-896e-42b7-8b69-5da16d2337bc
To: sip:[email protected]/ * /; tag = 13DB558-1845
Date: Thu, April 24, 2014 14:23:21 GMT
Call ID: e472fb51-35f0-4f2c-a84a-f0efd0cf9f2e
CSeq: INVITE 12021
Allow-events: telephone-event
WARNING: 304 192.168.0.1 "Media type (s) not available.
Reason: Q.850; cause = 65
Server: Cisco-SIPGateway/IOS-15.2.4.M4
Content-Length: 0Apr 24 14:23:21.210: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP ACK:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPj1I0P8BoX0CIMO3qfwTYEWe
y.fSEokHib
Max-Forwards: 70
From: 'Phone4' <> [email protected]/ * / >; tag = d56894bf-896e-42b7-8b69-5da16d2337bc
To: sip:[email protected]/ * /; tag = 13DB558-1845
Call ID: e472fb51-35f0-4f2c-a84a-f0efd0cf9f2e
CSeq: 12021 ACK
Content-Length: 0Apr 24 14:23:23.262: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
GUEST sip:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjzDEPLi9QFHsCPzfcVR.g72
hEIRSMbivf
Max-Forwards: 70
From: 'Phone4' <> [email protected]/ * / >; tag = 3dffd3d9-8f9a-48e7-b9a0-9a9f4c6c984d
To: sip:[email protected]/ * /.
"Contact: <> [email protected]/ * /: 5060 >; + sip.instance = '.<>
000-0000-0000-7c95f323b7b7 > '; + u.sip! DeviceName.CCM.Cisco.com = "SEP7C95F323B7B7"; +
u.SIP! Model.CCM.Cisco.com = "592"
Call ID: ea647ad6-36d2-414e-83d3-0e04b35e8129
CSeq: INVITE 26904
Allow: PRACK, GUEST, ACK, BYE, CANCEL, update, SUBSCRIBE, NOTIFY, REFER, MESSAG
E, OPTIONS
User-Agent: Cisco-CP3905/9.2.1
Support: replaces,join,sdp-anat,norefersub,extended-refer,X-cisco-callinfo,X-c
ISCO-ServiceUri,X-Cisco-escapecodes,X-Cisco-Service-Control,X-Cisco-monrec,X-CIS
Co-config,X-Cisco-SIS-4.0.0,X-Cisco-xsi-7.0.1
Expires: 180
Accept: application/sdp
Allow-events: kpml, dialog box
Remote-Party-ID: 'Phone4'<>[email protected]/ * /: 5060 >; intimacy = off
Content-Type: application/sdp
Content-Length: 294v = 0
o =-2208995142 2208995142 IN IP4 192.168.40.11
s = FOXPHONE
c = IN IP4 192.168.40.11
t = 0 0
a = X - nat:0
m = audio RTP/AVP 0 8 18 111 16386
a = rtpmap:0 PCMU/8000
a = rtpmap:8 PCMA/8000
a G729/8000 rtpmap:18 =
a = annex b fmtp:18 = yes
a = sendrecv
a rtpmap:111 telephone-event/8000 =
a = fmtp:111 0-15Apr 24 14:23:23.266: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Envoy:
SIP/2.0 488 Media is not Acceptable
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjzDEPLi9QFHsCPzfcVR.g72
hEIRSMbivf
From: 'Phone4' <> [email protected]/ * / >; tag = 3dffd3d9-8f9a-48e7-b9a0-9a9f4c6c984d
To: sip:[email protected]/ * /; tag = 13DBD6C-1273
Date: Thu, April 24, 2014 14:23:23 GMT
Call ID: ea647ad6-36d2-414e-83d3-0e04b35e8129
CSeq: INVITE 26904
Allow-events: telephone-event
WARNING: 304 192.168.0.1 "Media type (s) not available.
Reason: Q.850; cause = 65
Server: Cisco-SIPGateway/IOS-15.2.4.M4
Content-Length: 0Apr 24 14:23:23.278: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP ACK:[email protected]/ * /: SIP-5060/2.0
Via: SIP/2.0/UDP 192.168.40.11:5060; rport; branch = z9hG4bKPjzDEPLi9QFHsCPzfcVR.g72
hEIRSMbivf
Max-Forwards: 70
From: 'Phone4' <> [email protected]/ * / >; tag = 3dffd3d9-8f9a-48e7-b9a0-9a9f4c6c984d
To: sip:[email protected]/ * /; tag = 13DBD6C-1273
Call ID: ea647ad6-36d2-414e-83d3-0e04b35e8129
CSeq: 26904 ACK
Content-Length: 0Hello
In my view, that the call fails because the phone of 3905 Announces g729annexB codec. could you please try to configure "voice-class codec" or a "codec G711a/G711u' command under voice register pools 1-4 and check the behavior?
Suresh
Please note all useful posts
-
I need number phone to call microsoft for windows 8 pro for new machine windows easy transfer 8 home
I need number phone to call microsoft for windows 8 pro for new machine windows easy transfer 8 at home. Victory 8 pro is a desktop computer that is no longer used and I just bought new laptop which has win 8 64 OEM. Can I do this?
Press the Windows key + X
Click System
On Windows, click the link:
Get more features with a new edition of Windows
Click on the "I already have a product key link.
Enter your product key and you will be promoted to the Pro.
Go to reactivate by phone:
Activation of the phone:
1. press the Windows key + X , and then click run, and then type: slui.exe 4
2. then press the ENTER"" key.
3. Select your "country" in the list.
4. choose the option "activate phone".
5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
6. explain your problem clearly to the support person.
-
I need help, my plan cancellation. Messaged the company several times and they say that they are not available even though it says 24/7. I don't have a phone to call which is the reason why I can't just do this online. They stop to me to try the forum so I hope this helps. A charged last month even though I tried to cancel.
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
HOWEVER
This is an open forum, Adobe support... you need Adobe support
Coordinates of Adobe - http://helpx.adobe.com/contact.html can help
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
Creating ports FXS to using Extensions on the SPA3102 and PAP2T
Dear all
We have a CISCO SPA3102 and a Cisco PAP2T adapter available at two of our branches. The two branches are connected via LAN. Need to configure the FXS ports on two branches to work as extensions on IP. Kindly let me know if this could use these devices or to buy the new device and how we can create plans of numbering on both devices. Reference diagram. I don't have a lot of experince work with VOIP so your support devices will be very useful.
Concerning
Muhammad
You can configure direct ip, calls between the two adapters.
The diagram shows the SPA3102 ip address is 20.20.20.5 and the PAP2T ip address is 20.20.20.10.
I would setup the SPA3102 with a username of 2001 and the PAP2T with a username of 2002.
When you pick up the phone attached, a dial plan of (<>[email protected]/ * /: 5060 > S0) on the SPA3102 should call line PAP2T configured with Sip Port 5060.
When you pick up the phone attached, a dial plan of (<>[email protected]/ * /: 5060 > S0) on the PAP2T must call the SPA3102 line 1 configured with Sip Port 5060.
I would like to change the port numbers sip on each adapter by default 5060 to something else, but that is not a requirement.
On each line adapter configuration you need to set enable component IP: Yes, call without Reg: Yes, and call without Reg: Yes. NAT Mapping Enable must be not on each card.
-
With SRP547W and SPA303 VoIP phones
Hello
I have a SRP547W hung with the standard desktop phones connected via phone ports on the back of the device using 2 lines as well as the RTC SIP using the hash first of all that the router in the office. We just added a new Member of staff and bought a SPA303 in order to connect the SIP registered on the SRP547W lines, and I hope to have the opportunity to use the PSTN line when the SIP lines are busy.
The problem is, it connects to VLAN100 and gets its IP address and initializes very well however no line will only show configured and it cannot make or receive calls. I need to configure on the SPA303 tell him to use the SRP547W as its SIP Server/Proxy (not sure of the terminology).
Kind regards
Gerard...
SRP500 routers do not include a SIP proxy function or at the office, but are rather SIP user agents who register with an external proxy. Your only real options here are to get a third SIP for the SPA303 service, or install a small PBX IP locally that uses the SIP trunks for connectivity to the PSTN and has the SPA303 and SRP500 ports registered as endpoints.
See you soon,.
Dave.
-
I have and with USB 2.0 ports, Firewire 400/800 and eSATA external hard drive older. What is the best yet inexpensive way to connect it to my new Mac Mini?
Use a USB port on the Mac Mini.
Use of FW you would need to buy a bolt of lightning > adopter FW
-
Satellite U300 - 13 M - port external monitor (VGA port) does not work
Dear users of Forums from Toshiba,
I have a problem with the VGA port. I use the Windows XP operating system. Laptop, do not display on an external monitor, I tried all monitors to connect to my office, but does not solve this problem. I also tried to reinstall Windows XP, once again, and nothing has changed.
Please help me.
Best regards, Elbrus
Hello
I guess that by Satellite U300 came preinstalled with Vista. Am I right about that?
Anyway, if you want to use external monitor and switch successfully to him you must install the utilities and tools of Toshiba. There are several of them and allows you to use the FN + F5 key combination and move your desktop to laptop LCD display to the external monitor.Can you please tell me one thing: have you installed all the stuff of the Toshiba download page according to document Instructions of facilities?
The configuration of the laptop is not known to me, but try please check the Intel properties and let me know if the external monitor is recognized in properties. Usually, you can choose to use the external monitor there.You can also start Toshiba HWsetup utility. There must be tab display. There you can also find an option to use the LCD screen + monitor at startup.
Check it out please and post the results.
-
Tecra A6: no dial tone with Replicator port when the phone line is plugin
Hello
I have a Tecra A6 and the Advanced Port Replicator 3 Plus. Everything works except that I can't get a dial tone (for fax) when I plug the phone line into the duplicator. However, if I plug the same line to the Jack on the Tecra, I get a dial tone.
I suspect that the com port is not configured correctly. Toshiba software modem is set to 3 Com (which should be of the Tecra). Should this com port I choose for the Port Replicator?
Hello
Thanks for the info. I also think that the laptop was not properly connected to the port replicator. It is important that the laptop is connected correctly to the port replicator.
Further, you should check if you have a new version of the Extention3 of Mobile of TOSHIBA (TME3) installed on the laptop. -
Satellite A100: How to use the IrDA port with cell phone?
I have a laptop with an infrared port that I can use with another computer.
Now, I have a problem with my laptop at home, A100 series.
I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?Thank you
PetriDon't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
What cell phone do you have exactly? Satellite A100-xxxIrDA option appears in the control panel?
Maybe you are looking for
-
Ghost files - cannot delete Trash: error 50
Hello I have trouble to delete some files from Ghost that appeared in my garbage can: By emptying the Recycle Bin, 50 pops up an error: "the operation cannot be completed because an unexpected error occurred (error code - 50)." I looked at lots of di
-
to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do? It downloads everything and restarts in windows 8.1, then when I click on install now a message pops up s
-
How to write data from the INI file for the control of the ring
Hai, I need to write the data read from the INI file to a control of the RING. Doing this operation using variants I get the error. I will be happy if someone help me. I have attached the file special INI and VI.
-
Found 2 new updates tonight (Mon, 09/03/15), and I assume that they are in fact the regular updates updated Tuesday. March Malicious Software Removal Tool (KB890830) installed and executed ok but MSE definitions update (KB2310138) cannot install twic
-
I recently reinstalled my aio 924 and it works I can not simply run it in the list programs. It doesn't show there.