Extra addition RDM disk problem

Similar Questions

• Best practices - addition RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Addition of RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Unable to find another thread on this

  When you add RAW disks to the second node in Virtual Machines across physical hosts in the Cluster / Cluster across boxes,.

  VMware said shared point of the storage drives in the same location as the first node sharing storage disc *.

  -Select use an existing virtual drive...

  -In the drive path, navigate to the location of the disk (quorum) specified for the first node

  -Select the same virtual device node you chose for the first virtual machine shared storage disks, IE SCSI (1:0)...

  In other words to add the RDM to mscs-node2, navigate to/vmfs/volumes/lun1/mscs-node1 / mscs - node1_2.vmdk (mscs-node1_2 - rdmp.vmdk)

  For years we have directly added the ROW the second node specifying RDM disk not existing does not, in general we do directly from the host, not the vCenter, it seems to work fine.

  For what is the safest way, the official method can cause all sorts of problems if you need to cancel the registration of the ROW on the first node (here's where I found no official documentation).

  Delete you or keep the file descriptor? We tried to keep him, but ended up with several mappings to la.vmdk/rdmp.vmdk, so now, this system has disk2_.vmdk / disk2_ - rdmp.vmdk and disk4_.vmdk / disk4_ - rdmp.vmdk pointing to the same RAW.

  What really bothers me is safety, these are very important boxes, I prefer to continue to have the VMDK and rdmp.vmdk in separate data warehouses, and do not have this dependence on the head node

  Your comments please, we are viewing the store only setup of MSCS clusters with lanes separated from RDM and are there risks associated with this?

  * Ref: "Setup for Microsoft Cluster Service - 4.1 and Failover Clustering".

  I realize there was an error in my logic

  When you work with the main node, if there is a requirement to unmap drives ROUGH (move to another cluster vmware, cloning the system etc.)

  Take note of the location of all the rdmp.vmdks

  Remove each rdm disk without deleting

  To add

  Add "Use an existing virtual disk to disk" (yes I know its bad, but once you create the host calling now think its virtual)

  Navigate to the mapping of existing raw device, appearing like a vmdk * and add using the former location of scsi

  Graphic interface hides the descriptor

  A virtual disk has a vmdk and a flat.vmdk

  A CRUDE disk has a vmdk and a rdmp.vmdk (the dish is replaced by vocation)

  A suggestion of one of my companions is to locate the al the ROW in a single data store small, visibility of virtual machines with raw disk went like this

• Low disk problem

  I have a low disk problem that I am having 40 GB hard disk and using Vista Ultimate as the operating system. How can I remove the space and which are the files may be deleted. Currently, I have removed most of the software.

  Information all that 'other Options' are in the link that I have already given:

  The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

  • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

  • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

    Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

    In some editions of Windows Vista, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. This information will also be deleted. For more information about system restore, search Windows Help and Support "system restore."

  See you soon.

• Microsoft Cluster in vSphere using RDM disks

  Gentlemen, I have doubts that sounds simple, but it is better to ask than to the hurt things.

  Here, in the company where I started work two weeks ago. We have two servers of files Windows Server 2012, both are part of Microsoft Cluster Services, these two servers are virtualized on VMware ESXi 5.5, each on a host, here we use vCenter HA and DRS.

  Well, these file servers 03 RDM disks connected to the fibre channel, storage only disks are online only on node 1, node 2 drives are present in the computer Manager, but marked offline.

  To my knowledge, my experience of simple Microsoft cluster, the disks must be online on all nodes for disaster recovery is quick, for example through cluster in Windows Server 2008 R2 and Hyper-V Server R2 of 2012 using iSCSI storage and always leave the disks online on all nodes.

  My question is: is there a reason why a node drives remain online and the other node is taken offline? Because of RDM technology?

  I can then do disks on node 2 as well as online without risk?

  I'm an environment that left another analyst configured, had never made Windows Server 2012 in virtualized VMware vSphere servers cluster using RDM disks, so made the questions, so instead of simply in clicking on node 2 of disks and makes them online it is better to ask before

  Thank you!

  Ivanildo, is the normal Windows Server Failover Clustering behavior, since it is an active/passive cluster architecture, where a single node read/write a disk at a time, and is not a problem due to the use of RDMS in vSphere environment.

  The bellow image show two discs a WSFC, where 6 disk Offline on that particular node and the 7 disc is online:

  

  And, do TRY not to put the disks as offline being online on another node through disk management, this task must be performed by using the Failover Cluster Management console.

• Satellite L650 - Windows detected a hard disk problem

  I have 9 as 4 months old satellite L650 that this microsoft Windows message keeps popping up. "Windows detected a hard disk problem, back up your files immediately to prevent the loss of information... etc" have I not a bum hard drive or is it a mistake?
  I have
  have the media discs to recover and this means that I have to reformat the HARD drive and try again. !

  Hi watthhel,

  I think the error message must be correct to Windows 7 and you must do what tells you the message: immediately back up your data and replace the HARD drive with a new one. In your case I would never save important files on the HARD drive. Too risky to lose important files

  Your laptop is 4 months old and that would mean it s covered by the warranty. Contact your local authorized service provider and ask for a replacement drive. They will exchange it and the service is free. :)

• On the Satellite C - Windows HARD disk failure has detected a HARD disk problem

  Since 2 days have been making repeated dialog "Windows detected a hard disk problem", warning of potential failures of the disc so back up, what I did. Disk in question is a Toshiba MK-5065GSXN.

  As a non-tech user, my instinct is that a new laptop is a better choice than to call Toshiba support for a laptop warranty (2 years) out of.

  On the other hand there may be a simple software fix. The opinion or advice welcome

  Hello

  The message says that something is wrong with the HARD drive.
  It might be possible that your HARD drive will die sooner or later so his need to backup data on another HARD drive, disk or flash memory.

  Finally, I must say you n don't need to buy a new laptop just because your HARD drive starts to hurt work in such cases purchase a new HARD drive and replace it
  HARD drive is not very expensive and the replacement of the HARD disk is very easy in your user manual

  PS: what model of laptop you have exactly?

• Pavilion P6-2125 - adding additional hard disks

  Nice day.

  Can I add additional hard disks SATA internal? Is the power supply sufficient to allow this? In addition, this will void the warranty?

  Thank you, Joe

  Hi, Joe:

  When I look at the upgrade and maintenance of your PC guide, I don't get a hard drive Bay.

  So, I would say that your PC is not configured to handle more than one hard drive.

  http://h10032.www1.HP.com/CTG/manual/c03030603.PDF

  Paul

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• HP Pavilion g7-2010ne Notebook pc Windows detected a hard disk problem

  Hello

  I have a HP Pavilion g7-2010nr Notebook pc and two nights ago, I got a message saying "Windows detected a hard disk problem" and how do I back up my data and then repaired. So I tried it to my WD My Passport 500 GB external hardrive but as soon as he gets as 57% when the reverse said it will create a file system image, the backup fails I tired it three times to try different solutions I found on the help forums, but nothing helps and I don't know if maybe it's because the hard drive problem or another problem. Any suggestions are welcome.

  You can back up by using HP Recovery which should not have problems:

  This should help you:

  http://support.HP.com/us-en/document/c03489643

  You can stop it anytime before restoration starts if you encounter any problem.

• Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk.

  Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk. I am new to the computer world and that you just want to remove info a diskette and put the information on a CD. Can someone help me please?

  Hello
   
  
  1. are you able to use the other disks?
  2 have you tried to use this disk on another computer?
   
  The article below explains this error message. It is possible that data on the floppy drive went bad. I ask you to check whether the floppy drive works on another computer.
  Quick format in no. ID address mark results found
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;130627
   
  
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why my computer says "Windows has detected a hard disk problem", even though it says that the drive works fine in the properties?

  Hello

  I was doing some courses on my computer until this window came on my screen and playback;
  "Windows detected a hard disk problem. I immediately went and checked in the properties to see the current status of the disk, and it says "this device is working properly" I am confused and decided to restart my computer. Again, read the error message and it says that the disc was allowed in properties. Every 15 minutes or so, the same error message. I'm running on Windows Vista Edition Home Premium and have had the computer since 2008. Is this a virus? Or - is this just the computer falsely detect a problem?
  Can anyone help please?

  Thank you very much

  Liam

  What you see in the drive properties in Device Manager has to do with drivers and the drive configuration, not the real state 'physical' the reader.

  First of all, I error side of caution and if sure you have a backup of all your personal files, data, music, photos, contacts, movies, etc., external media (favorite external hard drive).

  Run the check disk (chkdsk); I suggest to run with two checked options, difficulty of file system errors and scan for and attempt recovery of bad sectors.

  How to run the check disk at startup in Vista or Windows 7
   http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Many manufacturers of computers and most hard disk manufacturers have diagnostic tools free you can download and run to check the status of your drive. Check on the web sites of their respective support.

  Hardware and software vendor contact information
   http://support.Microsoft.com/GP/vendors

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Kind regards

• Windows detected a hard disk problem

  I have a dell dimension E520 running Vista Home Basic 32-bit. It is about 2 years old. After login, I get the following message in a dialog box. The message continues pop - up every 10 minutes, or so...

  "Windows detected a hard disk problem and you need to back up the files and contact the manufacturer to determine whether the disk should be repaired or replaced."

  "The next disk reports failure.
  Disc name: SAMSUNG HD160JJ/P
  Volume: /; C: /.

  I have run "chkdsk" and also contacted Dell who advised a full diagnosis running. This indicates that all aspects of the computer and the hard drive are ok.

  Hello tassie steve,.

  You should replace the disk, and then clone on all content, including the MBR (master boot record) to the new drive. What brand you buy, you'll be able to download this free utility software from their site. Do it now, while you can always transfer your data! Hope this helps you. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• What is a Teredo Tunneling Interface Pseudso has a disk problem and can I fix it?

  My Windows 7 was freezing after I let it idle for a while. I have to do a hard reboot. Recently, I noticed that I had Dell support help agent and Dell update on my computer but I did not the it. They have been installed at the time my warranty missed. A forum said they had the same problem and the problem stopped after uninstalling them. It did for me too, for about two days but I'm back to freezing.

  Another forum says run diagnostics from the manufacturer. I did and I received two error messages. One was 0F00133C and the other was 0F001332 MAG DRIVE - request BIOCIC interrupt (IRO) has not indicated in time. At this point, the computer froze and wouldn't it be fun to just try again. Once again a forum said it was a sign of a dead hard drive.

  Just now under system and security of the Control Panel, I had Pseudso - Interface Teredo Runneling has a disk problem and hardware problem cannot have been detected.

  This computer can be solved without costing a fortune. They said I should also have other problems with a hard to die, but I did not. Would appreciate any help.

  Hello

  Thank you for giving us the opportunity to help you.

  I suggest you try the step provided by Nithyananda J replied on March 27, 2010 in the thread mentioned below. The steps helped a lot of people facing the issue with Teredo Tunneling Pseudso-Interface. Hope this will help you too.

  Teredo Tunneling Pseudo-Interface this device cannot start. (Code 10)

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• "Windows detected a hard disk problem" disk name VOLUME: WDC WD3200BEVT - 602CTI ATA DEVICE: C:\;D:\

  A message box appears every 10 minutes saying "Windows detected a hard disk problem" disk name VOLUME: WDC WD3200BEVT - 602CTI ATA DEVICE: C:\;D:\        If I click on backup now (that I tried to do it on the hard drive Seagate and CD... and it gets to about 35 to 50% then fails)... it goes to the BSOD... Yesterday, I bought a Driver Update. and this morning I ALWAYS get the message "Windows has detected a hard disk problem '...» I'm not very savvy computer... I researched this days... I gave up... Help, please! ....

  The disc is a failure.

  Copy what you can from it to your backup device. You may need several attempts to make the copy.

  Don't try to backup the drive: is not remaining usable for long enough for a full backup complete.

  Then replace the disk and reinstall Windows and your applications and data, and retrieve your information from the user of the copied data.

  You may be able to make a claim on WD http://support.wdc.com/warranty/index_end.asp?lang=en

• When I opened my cell phone message shows that Windows detected a hard disk problem I use toshiba laptop windows 7

  When I opened my cell phone message shows that Windows detected a hard disk problem I use Toshiba laptop windows 7

  Hi Vimalpal,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of the model of the laptop?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you run the disk check and check if it helps.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.