Space by default after calling model sup

Similar Questions

• Error when calling model sup in the XML editor

  Hi friends,
  For the part of the header of my report, I create a template void and I try to call it.
  I called the sub model by using the following commands: -.
  <? call@inlines:header? >
  <? end call? >
  Then in the body, I'm importing this file using the <? import:file:///C:\sreekanth\Header.RTF? >
  When I run the report I get the following error
  Due to: java.io.FileNotFoundException: /C:\sreekanth\Header.rtf (no such file or directory)
  Please help me.
  I can't find the reason for the error.
  But when I run it on the spot, it works fine.
  Is no problem when I create the submodel? What are the steps to create a sub termplate?

  Hello

  the BI Publisher Forum may be a better place for you to get a response than the reports Forum.

  Concerning
  Rainer

• Recently, I deleted my partition bootcamp about 65 GB space. However, after that I restarted my MAC, the 65GB is lost! The total space in my HD is currently 434GB although it should be 500 GB! Anyone know how to recover my space 65GB?

  Recently, I deleted my partition bootcamp about 65 GB space. However, after that I restarted my MAC, the 65GB is lost!

  The total space in my HD is currently 434GB although it should be 500 GB! Anyone know how to recover my space 65GB?

  See below for my disk utility:

  

  

  Hello waynetay,

  Thank you for being part of the community of Apple!

  Looks like you want to recover the hard disk space that has been used by Bootcamp.  I know how critical disk hard space is, as I understand it want to access it.

  The Boot Camp Assistant should have added space on the side of Mac OS X from the hard drive when it has been used to remove Windows.  Since that didn't happen, you need to back up the system, and then erase the hard drive, then restore the backup.

  First, back up the computer.  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Once you have the backup, you must erase the drive and then restore the backup Time Machine.

  You can use these measures to erase files on your startup drive and install a fresh copy of OS X:

  1. Before you begin, make sure that your Mac is connected to the Internet.
  2. Restart your Mac. Immediately hold down the command (⌘) keys and R after having heard the startup sound to boot into OS X Recovery.
  3. When the recovery window, select disk utility, then click on continue.
  4. Select the volume name back from your startup disk in the left side of the disk utility window, then click Delete.
  5. If you want to erase the disc safely, click Security Options. Select an erasing method, and then click OK.
  6. On the Format menu, choose Mac OS extended (journaled). Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.
  8. If you are not connected to the Internet, select a network in the Wi-Fi menu.
  9. Select the option to reinstall OS X.
  10. Click on continue and follow the instructions on the screen to reinstall OS X.

  Once OS X installation is complete, you should have the option to restore from a backup Time Machine in the first installation of OS X.  Choose this option, and the computer will restore everything that was on it before it has been removed.  More information can be found here:

  How to reinstall OS X on your Mac

  Have a great day!

• How can I activate the zoom pinch after calling preventDefault();?

  I created a chart in the edge animate which should work correctly on both the iPad and desktop computers. The html file that I create will be then fired in an iframe on a Web site as part of a larger page. I've included touch events and mouse for interactive elements, and most of the time it works fine on the desktop and iPads - except for when it is not.

  I found in my tests that sometimes a mouseOver/mouseEnter or even a click event fires despite my use of the e.preventDefault (); in my events touchStart or touchstart (I tried both). The behavior is not coherent enough for me to determine why this is happening so I have a solution for the moment - I've added preventDefault(); to touchStart in document.compositionReady:

  $(document) .one ('touchend', Function {}

  e.preventDefault ();

  });

  I understand that this is not ideal, but with deadlines and all that noise, it's the best solution I found to this day.

  It works perfectly, but as expected, it also disables the pinch zoom and pan. I don't care panoramic, but the zoom is necessary because the data points on the graph are on the small side. Can someone help me with the code, I would need to enable pinch zoom after call preventDefault()?: Or the conditional statement that would go preventDefault(); on a regular/single touch but not a pinch of touch zoom?

  I use v2014.1.1 to edge host CC on a Windows 7 machine, if it is useful.

  I cannot share my code because of the confidentiality agreement to my company, although if necessary I can probably model a simple sample - I'm hoping someone out there with more experience in the development of contact devices can point me in the right direction.

  Thank you!!

  Melanie

  This refurbished - Box dots.zip version handles the events of iOS. See private message.

  Tested: iPad (iOS 8.1.3) and MacBook (Mac OS 10.10.2) and Safari 8.0.3

  I will post a final version to improve the change of color and the text box.

• iPhone 6 each default phone call is pregnant. It is brand new

  I got an iphone 6 and for each appeal, it would always go to the speaker. I had a screen problem that could not be fixed so I got a new yesterday on the apple store. It does the same thing. All outgoing and incoming calls goes to the speaker. I looked for a way to change this, but without success. It seems unlikely that a new would have the same problem as the old. I'd like some ideas.

  A possibility (although the distance is not a default setting): http://osxdaily.com/2015/01/19/speaker-phone-default-iphone-calls/

• Port resets the value after calling DAQmxStopTask.

  Hello? My device is PCI-6025E and I used to reset by sending 0x00 on #0 with DAQ digital output port. It must be reset if the VC software button power ++ is pressed.

  But after a trial of DAQmx, even after that I sent 0x00, it will be set the value of 0x00 to 0xFF after calling DAQmxStopTask. I want to know how do I know it's 0x00, ahead of DAQmxStopTask.

  I tried to read the port #0 when writing of 0x00 in this regard, but it hangs or it returns error; He said that the port is reserved and can not read the port until the task (in writing) is completed.

  Here is the code that I tested.

  error int = 0;
  TaskHandle taskHandle = 0;
  TaskHandle DItaskHandle = 0;
  uInt8 data = 0 x 00;
  char errBuff [2048] = {'\0'};
  Int32 wrote;
  Int32 read;
  uInt8 dataToRead;
  bool32 bTaskStatus;

  DAQmxErrChk (DAQmxWriteDigitalU8(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,)); creaded the 6.5.2009
  DAQmxErrChk (DAQmxIsTaskDone (taskHandle & bTaskStatus));
  DAQmxErrChk (DAQmxWaitUntilTaskDone (taskHandle, 1.5)); 6.5.2009

  {if (bTaskStatus)}
  Reading test - DI on written port0-/ / / 6.5.2009
  DAQmxErrChk (DAQmxCreateTask("",&DItaskHandle));  6.5.2009
  DAQmxErrChk (DAQmxCreateDIChan (DItaskHandle, "port0/Dev1", "", DAQmx_Val_ChanForAllLines)); 6.5.2009
  DAQmxErrChk (DAQmxStartTask (DItaskHandle)); 6.5.2009
  DAQmxErrChk (DAQmxReadDigitalU32(DItaskHandle,1,10.0,DAQmx_Val_GroupByChannel,&dataToRead,1,&read,)); 6.5.2009
  printf ("acquired data: 0x%X\n",dataToRead "); 6.5.2009

  }

  Try to use the node property DAQmx to reverse digital lines.

  According to the that you configure DI / use the following

  Int32 __CFUNC DAQmxSetDOInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Int32 __CFUNC DAQmxSetDIInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Kind regards

  Glenn

  Technical sales engineer

  National Instruments

• Change default handler calls for unity

  In 4.0.4 SR1 unit, how to change the default call handler, under the heading "Call Routing"? The default call manager section is grayed out and there is no way to change opening greeting, another manager of appeal.

  The predefined rules are gray because they are not intended to be changed. They are rules "rescue" which must be in place and valid at all times, otherwise it is possible that calls will not be managed properly.

  You can override default emergency rule basically call manager by simply adding a new rule above him, with the same criteria as the Default rule call Handler, but different ' send the call to the "destination. However, be sure tp change the order of the rule such that your new rule is just above the default rule call manager, but under the rule of Sign-In attempt. If it is above the rule of attempt to Sign-In, then the subscriber access simple message will not work. Whenever you make changes to the range tables you want to run tests to ensure that they wanted affect on different types of incoming calls.

  For more information on routing rules, see here:

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_administration_guide_chapter09186a008022cb4e.html

• How to prune a white space before and after the bookmarks?

  Hello

  I hope that someone can help me with some JavaScript to remove the spaces before and after my favorites. I know I have to use regular expressions which I think would be ^ [\t]+| [\t]+$ and I also found a code on the internet but it is related to not favorite channels.] How would change this code work for bookmarks? Thank you.

  // Trim
  function trim(stringToTrim){
  return stringToTrim.replace(/^\s+|\s+$/g,””);
  }
  

  First of all, for this code to work, you must use standard double quotes, not the ones you currently have it.

  For use on a bookmark, you can do something like this:

  var bkm = this.bookmarkRoot.children[0];
  bkm.name = trim(bkm.name);
  

• Everyone knows the drivers of the device will not work after calling Camera.getCamera () so many times?

  Using Flash Player on Windows machines, since the Flash Player 11.4 version - Flash Player 15 (ActiveX version) and every version after that we had a problem in which Hauppauge PCIe and Videology cameras or other non-standard devices it does not work with Flash Player after calling getCamera() so many times. For example, we get the camera and publish a netstream for 10 minutes, then we have the camera set to null. Later, we call the camera again and after doing this 25 times or 100 times, the camera driver just seems to fail, and Flash Player is as is the streaming of the camera, but the NetStream info indicates zero-byte data video aired by indicating that there is no pixel coming from the camera.

  Someone else knows this problem to where you need to restart the browser or the Windows for Flash Player process power getCamera() properly again?

  Yes, it seems that others have experienced a similar problem. Adobe has not yet confirmed that it is a bug, but it is followed here:

  Bug #3850401 - handle with video.attachCamera leak leading to the unusable device

• How do to identify the documents called "models of library" using the RESTful API?

  How do to identify the documents called "models of library" using the RESTful API? Furthermore, what constitutes a document to be a "model of library"? I see nothing in the libraryDocuments RESTful documentation that describes this type of document, such as presented on the tab 'Manage' my developer account. Please see the screenshot below. There is a model of Document named "[DEMO ONLY] Test model" listed under "Library Templates" and I try to figure out which classifies that document to be included this way and how does produce a similar announcement by using the RESTful API.

  

  Thank you!

  Hello

  You can connect to access library models using the REST API, use 'GET /libraryDocuments' allowing to recover documents in library for a user. Models are created in the account of EchoSign, which later are accessible via the REST method mentioned above.

  Jat

• data DB fusion use spaces before and after some words, space don't show in ID when merged

  confuse the topic I know...

  CS5... My database (excel file converted into a tabulated TXT file) has some entries where there must be a space before or after the word.  And the example is "$1000,00 _" with the reprsenting _ where the space will be.  Of course when it is brought in ID as a data merge, these areas seem to be deleted.  Is there a way so that it can keep these spaces?

  When you select or update your data source, click "View options" in the dialog box. Then check the box to preserve the spaces in the data source.

  

• extra line after calling the model..? Call@:header? &gt;

  Hi all

  Whenever I call the RTF model, there is an additional features created after this call. For example there is an additional output of the call@header and ABC features although there are no spaces in the rtf. Is there a way to remove these additional lines?

  <? call@:header?

  <? Model: header? > region, address... <? end header? >

  ABC

  Thank you

  Sushil

  Use

  Thank you

  Bipuser

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• Satellite L50-A-103: cannot use the Nvidia GPU as default after Win 8.1 upgrade

  My Toshiba L50-A-103 has two graphics cards, an Intel(r) HD Graphics 4000 and Nvidia GeForce GT M 740.

  In my workplace, I use an external SyncMaster 2032BW monitor with a resolution of 1680 x 1080.
  I've upgraded to 8.1 Windows and I can't use the card nvidia as a default value.

  Now detects only Intel processors with up to 1366 x 768.
  Is there a solution to this problem?

  Hello

  Update you all Win 8.1 drivers and utilities that have been released for this model on the page of the Toshiba UE driver?

  After the update of the system Win 8.1 you must update the drivers in the correct order.
  The installation instruction is also available on the Toshiba driver page!

• values of VO transitional passive get lost after call to sub - taskflow

  Hello

  I have a taskflow (topflow) which has a

  (1) activity of the initial method (a line is created in a transient VO and set the current row, as few attributes of the line are defined)

  (2) an activity of views that display the transient as VO form, it also has a button

  (3) and a subtaskflow (innerflow)

  When topflow is called the activity of the first method is called and the view is displayed and click on the button for inside taskflow is shown

  Internal flow has

  (1) an activity view with a button and

  (2) a return activity with food-Save-Point set to true

  When internal taskflow is called it displays a page with a button and clicking the button invokes the activity back-(bringing the user to view the topflow activity.)

  And there is a page that has topflow added as a region.

  I followed the following steps:

  (1) run the page - the activity of the initial topflow method is called and activity in the workflow view appears with the values of the transient VO.

  (2) click the button - the innerflow is called and shown.

  (3) click button taskflow internally - the user is taken to view the activity in topflow

  But after step 3, I see that the values in the transient VO are lost. (It shows as if there is no current line).

  I 'State of passivation' checkboxes 'Include all transitory values' in the selected transitional vo, also I put an attribute in the VO as a key attribute.

  But when I run the piece of code:

  Am = (AppModuleImpl) Configuration.createRootApplicationModule AppModuleImpl ("model. AppModule', 'AppModuleLocal');

  ViewObjectImpl vo = am.getTestTRVO ();

  Line = vo.createRow ();

  row.setAttribute ("Dept", "Math");

  row.setAttribute ("DeptId", "1");

  vo.insertRow (row);

  vo.setCurrentRow (row);

  The ID of the string = am.passivateStateForUndo (null, null, PASSIVATE_UNDO_FLAG);

  am.activateStateForUndo (id, ACTIVATE_UNDO_FLAG);

  Line = vo.getCurrentRow ();

  System.out.println ("Dept:" + row.getAttribute ("Dept"));

  Configuration.releaseRootApplicationModule (am, true);

  It prints the values correctly.

  No idea why this is happening? I use JDev version 11.1.2.2.0

  Thank you

  Anil

  Is - that the VO has "No. Rows" option set.

  > On the general page of the presentation Editor, expand the Tuning section and in the recovery of the database group box, select the option lines No..

  Other guidelines for transient VO are listed here Application state management

  In case if you still see the question, can you please share a test case where the problem can be reproduced?