extract a single image of a video clip as a picture

Similar Questions

• Windows Movie Creator... can rotate you the image from a video clip?

  Need help

  Anyone know how to rotate the image on a video clip... the voice and image are therebut photo is on its side

  Need help

  Anyone know how to rotate the image on a video clip... the voice and image are therebut photo is on its side

  =====================================================
  If you use Vista Movie Maker 6...
  There is an effect that can turn the video.

  See the following article:

  Movie Maker-
  How to rotate a video taken from the Angle easily - XP - Vista
  http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527

  If you run Windows Live Movie Maker.

  See the following article:

  Shoot a video of 90 degrees with VLC or Windows Live Movie Maker
  http://www.howtogeek.com/HOWTO/14751/rotate-a-video-90-degrees-with-VLC-or-Windows-Live-Movie-Maker/

  (scroll down to: rotate and convert the)
  Video with Windows Live Movie Maker)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to layer a small image on a video clip?

  In Movie Movie Maker for windows 8, I want a picture of layer on a video clip. In this way when the video is a small picture will be put on top of the video sequence, where the video and photo can be seen at the same time. Almost like having an annotation of the image on the video. Please help, thanks.

  In Movie Movie Maker for windows 8, I want a picture of layer on a video clip. In this way when the video is a small picture will be put on top of the video sequence, where the video and photo can be seen at the same time. Almost like having an annotation of the image on the video. Please help, thanks.

  =====================================
  Maybe the next thread would offer a few ideas:

  Windows Movie Maker 2012: How to add photo
  Overlay on video while maintaining Audio
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker-AV/Windows-Movie-Maker-2012-how-to-add-picture/66441d47-EAAD-4af5-9D20-3cdbcf60ceec

• before I could see a 'fixed image' of any video clip that I had on my photos

  before that I could see a 'fixed image' of any video that I had on my photos, but after installing a program now all I see is MPEG on the icon video, how to restore the icon "video image"? Thank you

  No guarantee... but by running the following command can help...

  Reach... Start button / run...

  In the box run... type or copy/paste...

  regsvr32 shmedia.dll

  (Yes, there is a space between 2 and s)
  Press on... Come in...

  You should see a dialog box stating:
  "DllRegisterServer in successful shmedia.dll".

• How to export an image from the video clip of the first Pro to Photoshop for corrections and back.

  I want to export a video clip in Premier Pro on Photoshop for minor corrections throughout, then back to the first Pro. Corrections will be the same for each frame in the video. What is the best way to achieve this? If it makes any difference, I work with clips of R3D monochrome 6 K.

  Hi TR.

  Try to import the file directly in Photoshop. If this does not work, report.

  Thank you
  Kevin

• Transfer the 'Image' settings between video clips

  Hello community

  Concerns: First items 12

  If I have a project with various clips in my time line and you want to transfer settings (color, tone, gamma, brightness, contrast, etc) from one clip to another - how can I do? Rather than address each item one by one, I'm looking for an easy way to transfer the settings of other clips. I am aware of the fact that it works with effects and I also know that I could use a track of effects affecting the full clip - but I'm specifically looking for a solution concerning the adjustments only (i.e. seetings for photo quality).

  Sometimes, I cut a clip in various parts only to find out later that I would like to adjust the image quality. Instead of a single source file, however, I now have various clips in front of me and I therefore apply the same settings identical to several clips (there is more no 'a source file")

  Does anyone know how to do? Any help is appreciated.

  Thanks and regards /abel

  Right click on the clip you want to copy attributes, then select copy.

  Then select the clips on your timeline that you want to apply these attributes for, right-click and select Copy effects and settings.

  Easy cheese!

• [request] make image in the video clip

  I made an image loader using this code below, if I want this clickable map when his compilation, what I supposed to do? Please...

  kartu var = new card();

  var a: int = 0;

  var count: int = 0;

  While (< 11)

  {

  getImage (kartu.player [a], counter, one);

  a = a + 1;

  Counter = counter + 65;

  }

  function getImage (name, meter, ac)

  {

  var url: URLRequest = new URLRequest ("dekKartu /" + name + ".png");

  var loader: Loader = new Loader();

  Loader.x = counter;

  Loader.y = 560;

  Loader.Load (URL);

  addChild (loader);

  Never recommended nested named functions.  Pull the function test on its own.

  You could aim anything blindly targeting just "x" looks like it is targeting anything that contains all of the cards, which is why they are all pass. ""  Try changing the test function to be...

  function test(evt:MouseEvent):void

  {

  MovieClip (evt.currentTarget) .x += 5;

  }

• Can I take some images from a video for a period of time?

  So, I was filming a time to build myself a bed flat pack.  Initially I started with a delay of 5 seconds on my go pro, but at halfway, I went for lunch and stopped the time.  On his return, I stupidly clicked on play and didn't go pro gave to the video recording mode.  So I have half my time elapsed as a photo, taken at intervals of 5 seconds, and the other half in 1080 p at 60 frames per second.  Is it possible that I can take a cap of a single image of the video screen every 5 seconds (or every 300 images or more) to make it so the same format as the first part.  I don't want to do this manually because this way, I would have about 50 minutes of video to sift through.

  See you soon.

  A viable method is to:

  1 apply a posterize time effect to the clip and set the framerate 1FPS

  2. use speed/duration (right click on the clip) and set a pace faster or the shorter duration - a few mathematical functions required: new duration = duration of the clip in seconds / 5 (since you wanted to 5 seconds interval) / frame rate of the project.  for example 50 min = 3000 s;  3000/5 = 600 (or images) / 30 fps = 20 seconds.  Think math is right.

  See you soon

• Is there a way to clear all event listeners, to stop all the video clips, etc.?

  Is there a syntax for that?

  I have a movie that has 15 images. Each image has integrated video clips in video clips, tons of entertainment and event listeners. None is needed except when they are on the scene, on the frame. However, the animations continue even when the frame is left.

  For example, I have a framework that shows a rendered animation dynamically the leaves that fall from the tree. When the frame is left, the leaves continue to decline.

  There are many cases of this kind of thing happens.

  
  Ideally, I'd like to just be able to erase everything when a new image is loaded, since no animations or postponed event from one image to the other listeners.

  
  Is it possible to do it without the thousands of lines of code it would take to manually remove all single animation and event listener and sounds, etc., of the scene?

  Thank you very much!

  Amber

  You must do it manually.

  or, you can convert each image into a swf file.  load each swf when necessary and, if you're publishing to fp 10 +, you can apply unloadAndStop() to kill all the flows in the SWF loaded and ready these assets to gc.

• Merging 2 video clips

  I try to have a start of video play smoothly in a framework that took place (frozen frame).

  I cut out an image from a video clip and held it for a few seconds.

  The goal is to have the images perfectly start playing in the animated film.

  The separation between the framework which was held and video animation, creates a "bump" between the two clips.

  Any suggestions?

  Thank you

  Daniel Fields

  Ann,

  You were correct!  I followed a tutorial Adobe on freeze frame via the time remapping effect and he gave me a perfect result.

  Thank you.

  Jonathan

• Always bringing image in photoshop video

  I use photoshop video to create a quick video that will use both video clips and still images. Bringing video clips works fine but when I make a fixed image in video editing, the image is enlarged in a way and does not not on-screen. I'm sure this is an easy solution, but I was not able to understand this. I would like the original dimensions of the photo to remain true in the video.

  Any help would be greatly appreciated

  You can use file > Place > Embedded (or linked), which will create a dynamic object and you can move it when it is placed:

  

  Or you can convert the smart object layer in the menu filter, then use ctrl/cmd-T to turn the layer size - hold down the SHIFT key to keep its proportions.

  

• Difficulties and video clips

  It's really irking me.

  I am extremely new to Flash so please bear with me. I guess that it is a simple, easy to fix problem I'm having. I have Adobe Flash Professional CS5.5.

  What I'm trying to do is a sequence of images after other video clips will stop display.

  The sequence of images does what it is supposed to and working properly, and the other clips are also successful. However, whenever I try to put the clips of film for images in frames or keyframes, start video clips will only play part of the path before the images appear. This happens even if the clips of images are on images/keyframes (I tried both) after the other movie clips.

  The clips that are supposed to play first are each on a separate layer and there are two of them.

  The first layer is called 'tree' and the second is called "text".

  The tree stratum is an animated gif image 45 that I shot in a clip. I created a motion tween and changed his alpha for the gif has a fading in and out effect. I also so that he stops to play again once it reaches the last frame. I am not using stop(); for this.

  The text layer has an animated gif image 40 I also turned into a gif. This gif is also a clip and also the motion tween. His alpha was also changed.

  Trees and text play together successfully, and how I want that they.

  The sequence of images is three separate images, each a different layer, which fade into eachother. These images are PNG, so they are not gifs or they have their own frames.

  The lower layer is called level 1 and executives 1 to 50 of adjustments of interpolation and motion alpha fading the png image. The image is a clip.

  The layer on top is called floor2 and has different 51-100 of a png image fade-in frames.

  The layer is called floor3 and a frames 101-150 d'enieme png fading.

  The images are successful doing what they are supposed to.

  Text and tree layers are a fla file and floor3, floor2 and layers level 1 a fla file.

  When I copy the images of level 1, floor2 and floor3 layers in a keyframe after the text layer and trees, they yield correctly, but when I test the movie, the sequence of images appears much earlier than it's supposed to, interrupting the video clips on the text of layers and the tree. I tried to move keyframes of the ground # layers farther down the timeline, but then the other clips of movie just stop.

  In the fla file with text layers and FIR, I have imported gifs in the library and then put them on the stage.

  In the FLA with layers of ground #, I imported the pngs in the scene.

  Here's what look like text layers and the tree:

  

  The layers of soil look like: #

  

  The rest of the frames the floor #s...

  

  So, I thought that the problem was that I had to delay the image when. I looked around and found no code or anything for that...

  Later, I thought it was because I had imported the tree and text gifs to the library before putting them on the scene.

  I open a new fla and imported gif 'tree' directly to the scene.

  I thought it should work because then he would show each individual image in the video clips, which is not in the photos above. By importing the gif like this, it shows the individual images. I tested with the sequence of images and it works fine. But I have a problem with this method too...

  I select all the frames for the gif convert to symbol, so I can add a motion tween and mess with the alpha. However, only the last picture is converted to a clip. Well actually no... Only circled below executives turned in the clip. Even when all frames are selected.  Is not very useful because then I can not change the alpha for the entire gif or I can create a motion tween without getting a message saying that the motion tween could not be applied to all managers.

  Looks like this version of 'the tree '.

  

  And executives so then continue up to 135.

  Executives who are light in the video are below.

  

  If I can solve the problem I'm having with the tree displayed in the two images above this sentence, then I can view video clips and image sequence without problem. It is not quite how I intended it to be, but she would be successful and would continue to operate.

  If I can fix the problem with the sequence of images showing early up to tree and clips of text is cut, then this project would be as successful and it would be how I wanted it to be.

  If you need more information, let me know and I'll explain something better.

  I am not prepared to provide a download link in this forum for my fla files, but I can send to you if you want to look. I don't want someone to be able to find them and take them by doing a google search.

  I downloaded two sovereign wealth funds however.

  The first is the tree and text layers/clips work as they are supposed to. The second is to do what it is supposed to be the sequence of images (level 1, floor2, floor3).

  Text and tree: http://glassoliverdesigns.weebly.com/uploads/1/0/6/5/10653451/tfg1.swf

  Level 1, floor2, floor3: http://glassoliverdesigns.weebly.com/uploads/1/0/6/5/10653451/tfg2.swf

  Notice how Flash swf, when the text stops the thing in the background at the end of the text and trees. If who can Flash WHILE the images appear, then that would be great.

  TL; DR: I want the # flash ground appears after the text and tree flash, but I continue problems and nothing I try is not working properly.

  Very concise question, enjoy the screenshots. Keyframes, one thing that the motion tweens do not always show very well. I would like to clear up a few things and see if it helps.

  Return to what you wanted to do originally, which is to copy the images from one document to the other. That's perfectly fine and to clear up, it will also copy library items (images, clips, etc.) that are required to copy these images for you, you don't need to import them yourself.

  To copy images (no symbols) successfully, select the first frame of the frames that you want to copy, hold down SHIFT and select the last frame (or even double clicking anywhere in the blue motion tween should select all as well). Now do a right click and "copy managers." Now, go to your new document, select an image, right click and select Paste images. You will see the same copied frames, blue representing the keyframes and tween came with it, and finally you'll notice all your images/etc have been copied to your library.

  Now is the right time to manage the background image library that was just copied, if you're a freak like me cleaning.

  This process is the same whether you have tried, for other documents that you want to copy to. If all resources correspond to the name then Flash will ask you if you want to "crush" this library item. If you do that, you altérerez one of your previous animations. Make sure that this is not the case.

  The witch hunt common here is not knowing how to slide frames properly. If the replacement is not the problem, it's what I suspect is your problem and you expand / reduce the timeline keyframes do not go with you.

  For example if I import 2 clips with fade in/out and move the keyframes that you did, I'll have something like this:

  

  Now, by moving more I would be very careful to select all the images I want to pass through the above methods. Click on the first picture, hold down SHIFT and select the last image or double-click anywhere in the middle of the blue. The selection of executives:

  

  Now, I just slide my images selected in the view of law, keyframes remain as it should (black dots):

  

  Playback of the animation as expected.

  Finally I don't know if you've used the Panel, but you really should get used to the query editor. This gives you control over the relaxation as well as shows you a view on key images that exist in a motion tween is selected.

  Initially, this Panel may seem complex, but it simply represents the basic properties that you can animate. All the more you animate properties can be added here. I moved the X, Y and Alpha properties of my object. So you can see what I was doing on the periods of 30 to 60. You can also adjust basic relaxation here.

  

  If your animation look not correct, you can select a motion tween, open the query editor and check the keyframes appear correct. Scrub the timeline and look at the values you are interested in. For example, Alpha for you.

  If you do not see the keyframes when you scrub the timeline, you moved your bad frames and keyframes exist probably in a different place, and therefore it seems incorrect.

• Same button on a single image to show/hide video clip?

  Hi, can a button on a single image be coded to show a clip on his first click and a second click, hide the clip?  Thank you

  Yes, assuming make you the invisible at the start movieclip, where Manager simply use...

  mc_name.visible =! mc_name.visible;

• Can I change several non-contiguous single video clip segments and the remaining segments together in a functional element?

  I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a second time eliminates the segment previously created with this command. Is there a way to create the first segment, save it, create the second segment, save it, and then combine the two?

  Windows XP

  Movie Maker 5.1 (2.1.4028.0)

  I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a second time eliminates the segment previously created with this command. Is there a way to create the first segment, save it, create the second segment, save it, and then combine the two?

  Windows XP

  Movie Maker 5.1 (2.1.4028.0)

  ============================================
  The cartel command only works if the video has been imported
  in segments (this only happens when "create Clips for video
  Files are checked in the import screen.) or if the files are divided
  in the timeline with no editing. If the files are changed or re -.
  organized the handset command will not work.

  You can save segments individually if all other files are
  removed from the timeline. The original file must be
  adding to the timeline and edited for each successive change and
  record.

  Easy solution... you can combine edited clips by registering the
  the project in the. WMV format. The result will be a single. WMV
  video file.

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Personally, I prefer to split video files and remove the
  unwanted part instead of use the trim option.

  "Split a Clip in MM2.1.

  Drag the video/audio clip to the
  Timeline.

  Read the video/audio by clicking on the
  "Play" button under the display screen.

  You will see the playback indicator
  (vertical line), advancing through the
  timeline.

  Click on the button "Pause" to the point
  where you want to split and type...
  CTRL + L or click the "Split" button to the
  at the bottom of the display screen.
  (you can also make adjustments to)
  Drag the playback indicator)

  Make splits as much as you want and
  remove unwanted in law clips
  Click on / delete.

• All my video clips display a generic logo in thumbnail view when they used to show an image of the film.

  HI - all my video clips (avi) show with a generic logo on the view thumbnails - when they used to show a frame of the video image.  Do you know how can I restore this view?

  original title: thumbnails

  Well I don't know how it works - but I just moved my videos folder in the "My videos" folder and all the icons appear as images!  I don't think that these files have different properties do?  Weird - but there you go.  They work very well in my photos, but not in my documents...