Extract the database query result

Similar Questions

• The database of results

  Hello

  
  Understand the data of OEDQ are temporary, so what happens to the data in the database of results, do they get automatically deleted or we need planning maintenance of regular tables so that the results of DB gets not too big, or tablespace gets fragmented if you use Oracle?

  Hello

  The short answer is Yes, Disqualification takes care to drop and re-create the tables of results repository.

  For the long answer, there is a KM article that goes into detail autour how Disqualification using the results repository database to

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=198798113827198&ID=1434326.1

  (If the link does not work, type the id 1434326.1 in the search box in My Oracle Support)

  Briefly for any process to Run 1 the underlying results database tables are created. At the end of the race, the tables are stored to allow you to track data, show drill-downs and intermediate processors via clicking in the GUI of the Disqualification. [This assumes of course that you have sample the 'All' value].

  At the beginning of Run 2, all the results of the tables associated with the process are fallen and re-created from scratch. So for normal day to day operations do not need to conduct additional housekeeping.

  There are 2 household tasks, you can eventually make (note that this is not recommended or supported to remove or interacts directly with the repository database files)

  1. the purge - the underlying data belonging to any project / job / process/snapshot / point etc.  can be purged by right clicking... The purge. This is useful if you have historical or unused items and you want to clear data from the database. Of course, data are re-created the next time that you run this element. Removing the item will remove also all its associated database tables. In addition, if you have performed the work from the Server Console you can purge these results in the results section of Server Console (right-click in the history of the work pane).

  2 orphans Disqualification version 9 and tables - tables low, orphans may be left behind where for example the server went offline unexpectedly under a Disqualification work / process during the race. See article [id 1360730.1] for orphaned details for the manual removal of the tables.

  Howard

• the SQL query result format

  Format the results of the SQL query, currently, show as below.

  Select license_type, correspondents of license_info where license_type in ('TEM', 'TDM') order by license_type;

  TDM 1445140800000000000
  TDM 1420952400000000000
  TDM 1444363200000000000
  TDM 1445054400000000000
  TDM 1428724800000000000
  TEM 1421125200000000000
  TEM 1423890000000000000
  TEM 1449637200000000000
  TEM 1444968000000000000
  TEM 1428724800000000000

  I need formatting like below

  Expected result:

  TDM 1445140800000000000 TEM 1421125200000000000
  TDM 1420952400000000000 TEM 1423890000000000000
  TDM 1444363200000000000 TEM 1449637200000000000
  TDM 1445054400000000000 TEM 1444968000000000000
  TDM 1428724800000000000 TEM 1428724800000000000

  I have sample data only, Blue said the change in your main table request

  Try:

  Select max (f1),

  Max (F2),

  Max (F3),

  Max (F4)

  de)

  Select decode (license_type, 'TDM' license_type) f1,

  Decode (license_type, 'TDM', expiration_date) f2,

  Decode (license_type, 'TEM' license_type) f3,

  Decode (license_type, 'TEM', expiration_date) f4,

  ROW_NUMBER() over (partition by order correspondents license_type) r

  Of

  )

  R group

  ----

  Ramin Hashimzade

• The XPath query results do not get

  Hello

  This is the xpath query and xml. Query is works well but do not fetch all results.

  Select d.

  the left outer join CALC_RUN_XML

  XMLTABLE (XmlNamespaces (DEFAULT 'http://www.cigna.com/coreops/ccmi/internal/calculation/1 http://www.cigna.com/coreops/ccmi/client/2 ','' as "ns2"), )

  "/ calculation/calculationParameters/clientSelections / ns2:client ' to CALC_RUN_XML. CALC_RUN_XML

  columns

  clientId varchar2 (100) path ' @ns2: clientId',.

  Number of account varchar2 (100) path ' @ns2: account number ',

  path of varchar2 (100) branchNumber ' @ns2: branchNumber',.

  path of varchar2 (100) benefitPlanNumber ' @ns2: benefitPlanNumber',.

  path of varchar2 (100) benefitPlanVariationId ' @ns2: benefitPlanVariationId',.

  path of varchar2 (100) benefitClassNumber ' @ns2: benefitClassNumber',.

  path of varchar2 (100) clientAccountEffectiveDate ' @ns2: clientAccountEffectiveDate',.

  path of varchar2 (100) clientAccountTerminationDate ' @ns2: clientAccountTerminationDate'

  ) d

  1 = 1

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'Yes'? >

  " < calculation = xmlns:ns2 ' http://www.CIGNA.com/coreops/CCMI/client/2 "xmlns =" http://www.Cigna.com/coreops/CCMI/Internal/calculation/1 ">

  < calculationParameters rateExhibitType = paymentFrequency "CAP" = "Monthly" calculationPeriod = "02" calculationYear = "2013" retroWindow = "Standard" retroWindowAmount = "" paymentDueDate = "2014-02 - 11 T 05: 00:00.000Z" > "

  < contractRateSheetSelections >

  < contractNumber selection '891' = >

  < rateSheetIds >

  < rateSheetId > 567 < / rateSheetId >

  < / rateSheetIds >

  < / selection >

  < / contractRateSheetSelections >

  < clientSelections >

  < ns2:client clientId = accountNumber "00358430" = "00358430" branchNumber = "A001" benefitPlanNumber = "MOAP001" benefitPlanVariationId = "00003250" benefitClassNumber = "A001" clientAccountEffectiveDate = "" 2009-06 - 01 T 04: 00:00.000Z "clientAccountTerminationDate =" 2199-12 - 31 T 05: 00:00.000Z "/ >"

  < ns2:client clientId = accountNumber "00358430" = "00358430" branchNumber = "A001" benefitPlanNumber = "MOAP001" benefitPlanVariationId = "00003250" benefitClassNumber = "A001" clientAccountEffectiveDate = "" 2009-06 - 01 T 04: 00:00.000Z "clientAccountTerminationDate =" 2199-12 - 31 T 05: 00:00.000Z "/ >"

  < / clientSelections >

  < / calculationParameters >

  < runHistory >

  < run runType = 'Se MOQUER"userId ="M59056"runDescription ="satish11"runDateTime =" "2014-02 - 11 T 17: 01:28.553Z" jobExecutionId = "2064" / > "

  < / runHistory >

  < / calculation >

  Thank you

  Partha

  Hello

  XML attributes belong to no namespace, unless explicitly qualified with a prefix.

  They do not inherit from their parents namespace either.

  So, in short, remove the attributes ns2 prefixes, and it should be OK:

  clientId varchar2 (100) path "@clientId."

  Number of account varchar2 (100) path "@accountNumber."

  path of varchar2 (100) branchNumber "@branchNumber"

  path of varchar2 (100) benefitPlanNumber "@benefitPlanNumber"

  path of varchar2 (100) benefitPlanVariationId "@benefitPlanVariationId"

  path of varchar2 (100) benefitClassNumber "@benefitClassNumber"

  path of varchar2 (100) clientAccountEffectiveDate "@clientAccountEffectiveDate"

  path of varchar2 (100) clientAccountTerminationDate '@clientAccountTerminationDate '.

• The SQL query result

  Hello

  Here's my data in the table for itm_id = 1000

  ITM_ID	ADD_ATR	DEL_ATR
  1000	a: b:c:d
  1000		d
  1000	d
  1000	e:f:g
  1000		e:f:g

  My required return is (a: b:c:d) d = a: b: c + d = a: = a +(e:f:g) b:c:d: b:c:d:e:f:g-(e:f:g) = a: b: c; d

  Output ITM_ID

  1000A: b:c:d

  can we get the output using the sql query above?

  I had tried with union but could not able to get the required result.

  Please let me know if there is no possible solution

  Thank you

  David

  I have the impression that you are looking to treat each character in 'RTA' as an individual item and then add or delete depending on whether they are an ADD_ATR or DEL_ATR.

  So something like...

  SQL > ed
  A written file afiedt.buf

  1 with t as (select 1000 as itm_id, ' a: b/c: some like add_atr, null as del_atr of all the double union)
  2 select 1000, null, would be "union double all the"
  3 select 1000, 'd', null of union double all the
  4 select 1000, 'e:f:g', null of union double all the
  5 select 1000, null, "e:f:g" of all the double union
  6 select 1234, null, "x: y: z" of all the double union
  7 select 1234, 'u: v: w', null of union double all the
  8 select 1234, null, 'u' of all the double union
  9 select 1234, "x: y", null of union double all the
  10. Select 1234, "x: z", null of union double all the
  11. Select 1234, 'p', the double null
  12            )
  13-
  14. end of test data
  15-
  16. Select itm_id
  17, cast (listagg(atr,':') within the Group (order by atr) as varchar2 (40)) output
  18 of)
  19 select itm_id
  20, atr
  21, sum (add_del)
  22 of)
  23 select itm_id
  24, coalesce(add_atr,del_atr) as full_atr
  25, decode (add_atr, null,-1, 1) as add_del
  26, regexp_substr (coalesce(add_atr,del_atr),'[^:] +', 1, level) RTA
  27, flat surface that l
  28 t
  29 to connect by level<= (length(coalesce(add_atr,del_atr)="">
  30 and itm_id = prior itm_id
  31 and coalesce(add_atr,del_atr) = prior coalesce(add_atr,del_atr)
  sys_guid() 32 and prior is not null
  33             )
  34 group by itm_id, atr
  35 having sum (add_del) > 0
  36       )
  37 * group by itm_id
  SQL > /.

  ITM_ID OUTPUT
  ---------- ----------------------------------------
  1000A: b:c:d
  1234 p:v:w:x

  that just shows how stupidly data is as it should be divided every thing in the different elements so that you can then group to determine how many of each, you have (and whether to add or subtract) and then re - combine results again in a combined string.

• How to clear the search query result set

  I dropped a search with the table query. When I search a value it is the display of the result, but when I click on the reset button, only the query Panel is reset to zero and not the table. What can I do to reset the table component associated with the query?

  When I click on the reset button, only the query panel goes to zero and no table.

  It will be reset nt table.

  What can I do to reset the table component

  Use of the component range reset. to do so.

  http://jobinesh.blogspot.in/2009/10/reset-content-of-Web-page.html
  http://myadfnotebook.blogspot.in/2011/05/making-reset-button-in-afquery.html trickles you want
  http://andrejusb.blogspot.in/2009/09/programmatical-reset-for-query-results.html

  -edited lately

  Published by: ADF7 on February 22, 2012 12:58 AM

• The strange query result

  Well, actually, it's like this. I'm trying to return the results of a search for a query, and here is what happens...
  
  [code]
  < name cfquery = "getNew" datasource = "#dsn #" >
  Select *.
  of tblWebcasts
  WHERE active = Yes
  < cfif isdefined QNE ('session.search.name') and session.search.name ' ">".
  and title like ' * #session.search.name #* '
  < / cfif >
  < cfif isdefined QNE ('session.search.genre') and session.search.genre ' ">".
  and like ' * #session.search.genre #* '
  < / cfif >
  < cfif isdefined QNE ('session.search.company') and session.search.company ' ">".
  and the company as "* #session.search.company #*"
  < / cfif >
  < cfif isdefined QNE ('session.search.category') and session.search.category ' ">".
  and the category as "* #session.search.category #*"
  < / cfif >
  < cfif isdefined('session.search.cpdpoints') and session.search.cpdpoints eq 1 >
  and cpdcategory <>"
  < / cfif >
  < cfif isdefined QNE ('session.search.keywords') and session.search.keywords ' ">".
  and keywords like "* #session.search.keywords #*"
  < / cfif >
  order by ID desc
  < / cfquery >
  [/ code]
  
  now, (copy and paste directly from my debug window)
  [code]
  Select *.
  of tblWebcasts
  WHERE active = Yes
  
  
  
  
  
  and cpdcategory <>"
  
  
  order by ID desc
  
  [/ code]
  
  Returns 0 results! However, it SHOULD return 1 result.
  
  [code]
  [code]
  Select *.
  of tblWebcasts
  WHERE active = Yes
  
  
  
  
  
  and cpdcategory <>"
  
  
  order by ID desc
  
  [/ code]
  
  This property returns the number of results that I know
  
  The strange thing is, when I copy and paste my debug component request for access to and run the query, it returns the a result he had to :/

  Ah the answer has been found!

  Turns out that even if * is the wildcard in access, when you run a query from coldfusion, you must use % as wildcard...

• The "database" query export to Excel?

  Hello world
  
  Hope everything goes well...
  
  We place our requests in the disco. Database.
  
  Is there a way to export the database to a different file as Excel.
  
  IOW, is the disco. Table of available database to report offshore?
  
  Pls advise, thank you, sandra

  Hello

  The list of workbooks can be found in the EUL5_DOCUMENTS table in your EUL. You can map this table in the EUL and then export the list of workbooks in Excel.

  Rod West

• How to get the sql query result?

  Hello

  Currently I use LV2012 to connect to an Oracle database server. After the Oracle Express and Oracle ODBC driver facilities/settings made.

  I managed to use the SQL command to query the data through my command prompt window.

  Now the problem is, how to do the same task in Labview using database connectivity tools?

  I have build a VI to query as being attached, but I have no idea of what range to use to get the result of the query.

  Please help me ~ ~

  Here is a piece of code that I use to test the SQL commands, you can use the part that retrieves the results of sql.

  It is also possible to get the rear column headers, but it's for the next lesson!

  ;-)

• Reruns of data to export the SQL query results grid

  I am running SQL Developer 2.1 on Windows XP. I have a long query that returns the results to the DataGrid. When I export these results, the query is executed again. Why? Is it possible to export the results without rerunning SQL?

  Should not happen. But when sqldev returns results, mind that he gets only the first 50 lines. If you do not get them all before you export, they must be obtained at the course.
  Try CTRL-END in result grid before export and see if it works.

  Hope that helps,
  K.

• The dynamic query result

  Hey everyone, have a quick question. I just started using ColdFusion week last to my current job and I do a database work. One of the scripts I'm working on that is dynamically allow a user to enter information for a source of data, their username, password, database, then an operation of query-by-example-esc on this database. However a question that I am currently running shows these data. So say I got into a simple HTML form and it is passed in as the name "Colonne_1". So when I go to access my SQL statement, I'd be using:

  #Form.Column_1 #.

  My problem comes when I am printing these data. Normally I use the following code:

  < cfoutput query = "GetResults" >
  #username #.
  < / cfoutput >

  Where # is the column #username I was looking for. How would I be able to have dynamically it out everything that needs to be entered as column name in colonne_1? So, something like:

  < cfoutput query = "GetResults" >
  # #Form.Column_1 # #.
  < / cfoutput >

  Thank you!

  table notation is your friend.

  QueryName ["columname'] [line number]

  or, in your case,

  QueryName [' #variable for columname # "] [row number]

• the date query results

  Hello eveybody.
  
  I'm facing a strange problem.
  
  I have an array with an element of date (date) and some digital stations. All rows in the table have the correct date component.
  
  But if I ask
  
  Select sum (a1), (a2) sum, sum (year) table where date > Xfecha it gives me a different result if I ask
  Select sum (a1), (a2) sum, sum (year) table where date between Xfecha and Xfecha2.
  
  Xfecha = July 31, 10 ' in SELECT 1º
  Xfecha: = 1 August 10 ' 2 choose
  Xfecha2: = 31 August 10 '
  
  The command select 1 must add the same lines as 2nd choice.
  
  Any idea?
  Thanks in advance and it concerns everyone.
  
  Published by: selezeus on August 15, 2010 20:33

  Selezeus,

  Make sure that there are no entries after the date of August 31, 2010. And also try to use the TRUNC function in select queries.

  Select sum(a1), sum(a2), sum(an) from table where trunc(fecha) > Xfecha;
  Select sum(a1), sum(a2), sum(an) from table where trunc(fecha) between Xfecha and Xfecha2;
  

  Kind regards

  Manu.

  If my answer or the answer to another person has been useful or appropriate, please mark accordingly

• Keep the query results set all paging

  I have a query back thouands of records. For do not impact performance display and paging, which would be the best way without use of query caching? Is it possible to keep the first recordset query time she and her use in Exchange?

  Load balancing definitely throws a wrinkle by using shared memory.  There are ways to address these problems, but they all come with the pros and cons, just basically choose what pros like you and what the disadvantages that you can live with.

  I.E. you can use sessions.  So when a user first access your application, all future queries are sent to the same server that processes requests for first.  But this means that if this server will see, all users currently glued to it are s.o.l.

  I saw other people using databases for the persistent memory.  But then, you have the LAG involved in obtaining data from the database on every request, although it should be easy fast queries to do this.  Side pro, it does not matter which server processes the request.

  It would be different then just re - run the original query every time, but rather store the original query results into a temporary table space so that any complexity which may exist should not be repeated.

• How I wear on the variables in the database of a page to another?

  I have a MySQL database displayed in a table on one page, with a link in each row, pointing to a DETAILS.php page where I want to show the end user all the details of this record or a line item in a different format. After that I have a link to the new page, how should I address variables for "this particular record" clicked on in the 1st page? What is the system automatically knew which record of the row in the table that I linked to?

  lesliebrownadobe wrote:

  I have a MySQL database displayed in a table on one page, with a link in each row, pointing to a DETAILS.php page where I want to show the end user all the details of this record or a line item in a different format. After that I have a link to the new page, how should I address variables for "this particular record" clicked on in the 1st page? What is the system automatically knew which record of the row in the table that I linked to?

  Each record in your database must have a "unique" identifier (primary key), tying the record to it.

  You then pass this "unique identifier" to the details page in the link that you create using php for loop through each record found in the database, which no doubt you already have.

  On the details page then use you php to get the id of the file sent to the page via the link:

  $id = $_GET ['id'];

  Once you have the id that you are in business and can create a mysql on the database query to get the record corresponding to the code

  SELECT * FROM table WHERE id = "$id".

  'id' is the 'unique' field in the database that identifies records and the "$id" being the variable passed from the link

• Cancel the database operation

  How can I cancel the database query if take as much time at run time.

  It is not possible to cancel your PL/SQL procedures or triggers of your forms or db
  But if your block is based on the database property Yes and you query on the block as the use of EXECUTE_TRIGGER then you can use
  the "Interactive Mode" value of the form Non-blocking
  By doing this your forms can give you the control to use to cancel the database query.