extraction of intermediate with Server 10.2 determinations of attribute values

Similar Questions

• Need to query the result with two different of a same attribute values

  Hi all
  
  I have a search query where I need the query result when an attribute have two different values (e.g.: want the query result when the attribute 'status' is equal to 1 and 2)
  
  And also, the user will be able to search by any State result.
  
  What is the best way to implement this.
  
  Thank you
  DK

  The solution to this use case is to put the part by default ((statut == 1 ou statut == 2) and: bindUserInput is null) as part of the query and the Pratt of the query to run when a value is entered by the user in a view criteria. East view criteria (Status ==: bindUserInput) and the value of the checkbox to ignore the values null. If the binding variable: bindUserInput is null, only the portion of the query is running, if the binding variable is not null, the display criteria is added at the request of three and three default components will not return any line.

  Timo

• Put the pump extracts the intermediate system

  Hi guyz,

  I need to throw the intermediate system. I installed just soft GoldenGate on a separate server.

  Architecture:

  There is an excerpt on the 1 server, that copy paths to the intermediate system to the 2nd Server. There is a replicate 3rd server to Oracle database record.

  I need simply copy paths from the 2nd to the 3rd server using GoldenGate server.

  I have a problem on the 2nd (intermediate system) server when I set up a pump extract described in official documents (5.4.2 intermediate system):

  https://docs.Oracle.com/GoldenGate/1212/Gg-Winux/GWUAD/wu_live_reporting.htm

  > ggsci

  Add SNIPPET of epmp1, EXTTRAILSOURCE /u01/app/oracle/ggs/11.2/dirdat/tr

  Add rmttrail/u01/app/oracle/gg_files/dirdat/tr, extract of epmp1

  ADD EXTTRAIL u01/app/oracle/ggs/11.2/dirdat/tr, EXTRACT of EPMP1

  > ggsci edit param epmp1

  EXTRACT epmp1

  SOURCEDEFS /u01/app/oracle/ggs/11.2/dirdef/my.def

  -Specify the definitions of target file if SOURCEDEFS has been used:

  TARGETDEFS /u01/app/oracle/ggs/11.2/dirdef/my.def

  -Specify the name or the IP address of the monitoring system:

  RMTHOST dc0a5db00.ps, MGRPORT 7809

  RMTTRAIL /u01/app/oracle/ggs/11.2/dirdat/tr

  TABLE ns_build.*.

  TABLE logdb.*.

  TABLE monitor.gg_mon.

  tail-300 ggserror.log

  2015-04-17 13:28:29 ERROR OGG - 00042 Oracle GoldenGate Capture for Oracle, epmp1.prm: SOURCEDEFS cannot be used with this type of snippet.

  2015-04-17 13:28:29 ERROR OGG - 01668 Oracle GoldenGate Capture for Oracle, epmp1.prm: PROCESS ABENDING.

  Before that, I did the def file.

  Please, help in advance

  Pumps do not use TRANLOG. Pumps to read from the trails that the excerpt written.  This is the track that reads from the pump: EXTTRAILSOURCE /u01/app/oracle/ggs/11.2/dirdat/tr

  So to change it, would you say ALTER EXCERPT epmp1 extseqno 0 extrba 0<--Or whereever="" you="" want="" to="" alter="" it="" to. ="" extseqno="" 0="" is="" the="" first="" trail="" which="" would="" have="" been="" produced="" by="" the="" extract,="" such="" as="">

  But can also go a step backward.  Have your primary extract writing to a remote system is not a good idea for a production environment because if the network goes down, the main excerpt.  Ideally, what you want is the excerpt and the pump has been running for the source server and just use the pump for broadcase trails to whatever or targets that interest you.  I don't see the reason why you would need a server share whole just to operate the pump, and you add also risk the main excerpt.

• HP hp Server ml310e gen8 v2 install with Server 2008 4 t hard drive can be used completely

  Know one on hp hp Server ml310e gen8 v2 install with Server 2008 and why 4 t hard drive cannot be used entirely to the server? How can I change the settings of the Bios MBR TPG mode?

  This would be better served if posted in the Forum of Support Business company instead of the global consumer support forum.

  http://h30499.www3.HP.com/

• Problems with Server 2008 R2 Kerberos with Mac and CentOS machines? Need to re - join domain

  We are having a problem with our Mac and Linux / CentOS machines constantly having to be re-attached to our AD domain.
  We are able to join machines to the domain successfully, but after a few weeks or if authentication is broken and we again join them to the domain.
  I see Security event logs on our domain controller when kerberos authentication fails.
  On the linux server - I see this message in the logs
  -binding failed: server not found in the kerberos database.

  I'm guessing this has to do with Server 2008 R2 and incompatible mac / linux versions.

  Any ideas?

  Hello

  I suggest you try to post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  It will be useful.

• Problem with Server 2003 gpedit.msc changing wallpaper

  Hi, I have a small network of computers that I want to apply a group policy to modify their current context.

  However after following previous questions tips and sites etc I found no correct solution of some model policies not appearing as / administrative / office.

  I don't know any network has never treated networks wireless on small networks with no strategy of setting admin laymens terms would be useful - thanks

  Ben

  Hi Ben,

  Because the question you posted is linked with the background screen with Server 2003 gpedit.msc change, it would be better suited in the Technet Windows network. Please post your question in the following TechNet group policy forum:

  http://social.technet.Microsoft.com/forums/en/winserverGP/threads

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How many Pro 7 integrate with server 2000?

  I have a small office network running Server 2000.

  The processors are more old PC, running XP Pro.  In my view, they are 32-bit.  They are HPs purchased in 2004, but I don't have the rest of the features in front of me.
  I am curious about the CPU upgrade to Windows 7 Pro, but have 2 concerns.
  How well Windows 7 Pro communicates with Server 2000?
  How smoothly 7 Pro runs on 32-bit computers?  In other words, the my CPU are too old to really appreciate the upgrade?

  Upgrade to vintage 2004 PC to Windows 7, although possible, is very impractical and a bad investment.
  RAM is a big problem (how even support apart from the older cost of SDRAM), former slower processors, etc.   Really wouldn't make sense.

• Manager of customization with Server 2008?

  Does anyone know if the specification of customization Manager will work with Server 2008 model?

  When I create a new set of specifications through the wizard, there is no option to choose anything other than "windows" or "Linux".  The section below these options makes reference to a custom sysprep answer file that let me hear XP/2000/2003. Bascially Microsoft has deleted with Sysprep in 2008 (you can run a very simple, no custom version to change the SID and do an OOBE) or create an XML part that is personalized through Windows AIK. So I am wondering if it is supposed to be for 2008 too? I have a feeling that it is not. How do others are 2008 deployment models?

  Does anyone know if the specification of customization Manager will work with Server 2008 model?

  Yes, he does.

  When I create a new set of specifications through the wizard, there is no option to choose anything other than "windows" or "Linux".  The section below these options makes reference to a custom sysprep answer file that let me hear XP/2000/2003. Bascially Microsoft has deleted with Sysprep in 2008 (you can run a very simple, no custom version to change the SID and do an OOBE) or create an XML part that is personalized through Windows AIK. So I am wondering if it is supposed to be for 2008 too? I have a feeling that it is not. How do others are 2008 deployment models?

  It's the same as it was never really.  The only difference is that now you don't have to have the sysprep files copied in prior vCenter.  I have specificaitons of customization for 32-bit and 64-bit 2008 and 2008 R2.  Everything works fine.

  Good luck!

• 802. 1 x with dACL - prefix of an invalid attribute: "ACS."

  Dear all,

  I spent half an update to fix this problem without success, I hope you could help me.

  I configured a simple solution of 802. 1 x on a PC driver who must authenticate through PEAP-MSCHAPv2 users against my user database internal GBA.

  Version of the switch:

  Model number: WS-C3750V2-48PS-S

  Software: c3750-ipbasek9 - mz.122 - 52.SE.bin

  ACS:

  C1121 with version 5.3.0.40

  The problem occurs when the ACS sends within the radius Authentication accept packet the following attribute:

  Cisco-AV-pair=ACS:CiscoSecure-defined-ACL=#ACSACL#-IP-auth-4eb90704

  On the side of the switch, I see the following debug log:

  002558: 8 Nov 14:31:35.586: % AUTHMGR-5-START: start "dot1x' for the client (0022.680b.da7b) on the Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19

  002559: 14:31:35.703 8 Nov: AAA/ATTR: prefix of an invalid attribute: "ACS."

  002560: 8 Nov 14:31:35.703: % DOT1X-5-FAIL: failure of authentication for the client (0022.680b.da7b) on the Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19

  002561: 8 Nov 14:31:35.703: % AUTHMGR-7-RESULT: result of the "dead server" authentication of 'dot1x' for the client (0022.680b.da7b) on the Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19

  802.1 x switch associated config:

  GLOBAL:

  Group AAA dot1x default authentication RADIUS

  Group AAA authorization network default RADIUS

  start-stop radius group AAA accounting dot1x default

  RADIUS-server host 172.31.254.140 auth-port 1645 acct-port 1646

  RADIUS-server host 172.31.254.141 auth-port 1645 acct-port 1646

  RADIUS server key 7 123415ASFASFAS55512

  RADIUS vsa server send accounting

  RADIUS vsa server send authentication

  analysis of IP device

  IP access-list extended by DEFAULT, ALL

  allow an ip

  SPECIFIC PORT

  interface FastEthernet1/0/1

  Description model Port 802. 1 x

  switchport access vlan 244

  switchport mode access

  IP access-group by DEFAULT, while

  authentication event fail following action method

  open authentication

  authentication priority dot1x mab

  Auto control of the port of authentication

  periodic authentication

  MAB

  dot1x EAP authenticator

  dot1x tx-time 10

  end

  Next to the ACS authentication ends successfully, but for some reason, the switch cannot understand attribute was sent by the ACS:

  Why Authentication translates as 'server-dead?

  Hereby, I have attached the authorization profile, the downloadable ACLs and the detail of the RADIUS authentication for the request...

  Any idea?

  Thank you very much!

  Yes, I came across the same issue and ended up as a bug with the 3750

  CSCtj28883 dACL attribute the parsing failed when debug "author of aaa" on

  Description is

  The DACL processing fails when the following debug settings are turned on.

  1 debug aaa attr

  2 debug aaa authorization

  The same works very well when they are turned down. Set the switch of newspaper.

  I believe has been resolved in version 3750-Build 12.2 (55) as to the next note, attached to the bug as proved to be irreparable on later constructions

  The issuer has confirmed that the bug is not seen on the image of 55SE.

  The issue is only seen in 53SE

  can also try and switch debug off

• I have a table with a city of the column. Values are 'delhi' and 'hyderabad '.

  I have a table with a city of the column. Values are 'delhi' and 'hyderabad '.

  as

  ID |   City

  ---------------------------

  1     |  Delhi

  ----------------------------

  2     |  Hyderabad

  Now, I have to update Delhi and Hyderabad Hyderabad with Delhi.

  How to do this?

  Hi Indi,

  (1) why do you want what it? Requirements of companies?

  (2) how much these values you want to reverse? Is it only "Delhi" and "Hyderabad", or there is a list, or other logic?

  Update your_table

  Set city = decode (lower (city), 'delhi', 'Hyderabad', 'hyderabad', 'Delhi')

  where lower (city) ('Delhi', 'hyderabad');

  Does that help?

• The creation of Group of disks with clever storage capabilities enabled? Attribute of Req

  Hi Experts,
  
  We have a single query about the "creation of the disk group with Smart storage capacities Enabled? Attributes of Req? How to set and list of minimum parameters
  
  -Vincent

  Hi Vincent,.

  Basically, it should set the following parameters for exadata smart storage features:

  compatible.RDBMS a.
  compatible.asm b.
  c. cell.smart_scan_capable

  Also, please update what is the version of database Oracle & Exadata version...

  It could be that useful...

  Thank you
  LaserSoft

• Calculated field with the currency formatting, and hiding the values null

  I am designing a PDF form for quote and I have a field defined to multiply the amount of an article and the unit price to the total price.  There are 5 lines on each quote, and if users are citing only 1 or 2 items I want the values null in fields unused price extended to be hidden.

  I did it with the following script

  If (event.value == 0) event.value = ";

  But when I enter the quantity and total price of price is displayed as a regular number (100) instead of currency ($100).

  I can format to currency with

  Event.Value = util.printf ("$%.2f", event.value);

  I don't know there's a way to combine to give rise to such a situation then, so if the field is 0, make null and if not then format as currency but I don't know how to do it.

  Any help would be appreciated.

  Andrew

  Newer versions of Acrobat hide zero for fields values using the number format and with a currency symbol. »

  But since you can't control the updating of user systems, you must use a small function documented for formatting numeric fields on the fly.

  With the extended price field set to 'None' format, you can add the following script to the Validation script "Custom" or add it to a custom JavaScript calculation. The "Custom Validation will work with any method of calculation. Note that the form must be cleaned or recalculated to see the result of the validation script change.

  if(Event.Value == 0) {}
  Event.Value = ""; set the field value to null to a value of zero
  AFNumber_Format (2, 0, 0, 0, "", true); number with no currency symbol format
  } else {}
  AFNumber_Format (2, 0, 0, 0, "$", true); for the format of the values non-null for number with the currency symbol
  }

  The positional parameters are the number of decimal places, the Style separator, negative value Style, Style of (unused) currency, currency symbol, the currency symbol Pre-hanging chain.

• trigger with: new and: old to compare the values

  Jin
  I want to use the trigger with: new: old to compare the old values with new ones.
  I have an employee of the table
  
  Name Null? Type
  ENO NOT NULL NUMBER 4
  ENAME VARCHAR2 (20)
  SALARY NUMBER (10.2)
  
  now I want to set up a trigger so that it checks everything by inserting the values as part of if
  the insertion of salary value is greater than the last salary (line) table. If it fails, then it will be
  raises an application error.
  I can't write this code as is return errors.
  Thank you
  
  Published by: user13371438 on Sep 6, 2010 03:00

  Please share the code you have written to achieve so far.

• Peripheral compatibility with server software blackBerry Smartphones

  We are currently using the beta sync BlackBerry devices with an Exchange with BlackBerry Manager 4.1 server.  One of our users wants to v4.3 device software v4.5.  We are trying to determine if this will create problems of compatibility with the server software.

  Hello

  I don't think, but should happen tjhat, you can downgrade back to 4.3.

  I think you will find more detailed answers if you post your question on the set of "Blackberry Enterprise Solution".

• registration iPhone 7 with Server 5.2

  Hello

  My Server 5.2 (same problem with 5.1.7 or 5.2 beta) cannot register for any iPhone Plus 7/7:

  -Installation of works 'Profile Trust' (signed and verified)

  -Installation of the "Remote Management" profile "has failed."

  -Display message is: 'profile Installation Failed, Failed to Install profile '.

  I have no problem with other models of iPhone (5-6 s) / iPad (Pro 2) under iOS 10.X (or 9.X), more the failure is not related to a specific user.

  Any comment or idea about the problem is welcome.

  Thank you in advance.

  See you soon.

  Hello world

  I solved the problem, which was a conflict between new iPhone IMEI number 7 and old iPhone to my users.

  They have updated devices using iTunes "backup & restore" without "erase all content and settings" on the old iPhone.

  for example if iPhone old user is in the Profile Manager and you want to register iPhone 7

  0: [13712] [10/02/2016 08:09:58.240] < 192.168.54.163 > PDOException: "SQLSTATE [P0001]: raise the exception: ERROR 7: IMEI may not be changed once set ('11 111111 111111 1' = > '22 222222 222222 2')"

  for example if iPhone 7 is in the Profile Manager and you want to re-record old iPhone user

  0: [30630] [10/02/2016 09:40:54.462] < 192.168.54.159 > PDOException: "SQLSTATE [P0001]: raise the exception: ERROR 7: IMEI may not be changed once set ('22 222222 222222 2' = > '11 111111 111111 1')"

  If this happens to you, always make a ' erase all content and settings "on the old iDevice.

  CU.