Extremely high CPU with tabs open minimum usage?

Similar Questions

• Satellite P200 - 1EE 100% CPU with Toshiba Flash Cards usage

  Resource monitor shows 100% CPU usage constantly in recent weeks (no problem for the first 6 months that I have owned the machine) with 85 to 99% of my CPU used on 2 entries each shown as "Toshiba Flash Cards", no idea why and how I can sort this out as it slows everything down? Thank you very much

  Andy

  Hello

  The utility of Toshiba Flash Cards is a part of the Vista Toshiba value added package and it controls the functionality of buttons FN.
  Kody said already that it is advisable to reinstall the VAP to check if it would prevent the high utilization of the processor.

  You should also clean the operating system using the CCLeaner. After PPV remove you must run the CCLeaner to ensure that all of the VAP files have been deleted.

  Good bye

• Need help with the fix KB 900243... for use high CPU with file W3WP.exe

  SBS 2003 Enterprise.

  This hotfix contains two files:

  1 WIndowsServer2003-KB900243 - x 86 - enu.exe
  2 WIndowsServer2003-KB900243 - x 86-symbols - enu.exe
  Which of them install?  Or if the two, what order.
  Thank you.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Thunderbird 31.0: Tabs open not record leaving

  When I close Thunderbird 31.0 with tabs open and restart once the formerly tabs are not restored. The same problem I have with the file of the selected account. At the start of the Thunderbird don't remember. With older versions, it worked without any problem.
  Thanks, Herbert

  Use 'Manually sort folders 1.1' rather than "Add-on Folderpane tools" and it works.

• problem with high CPU usage audiodg.exe

  While playing the game, I get a message saying that I raised the CPU usage 99% of the base. This is caused by "audiodg.exe. I tried a few bugs that I found online. I was told that they would not work with my computer. I have a Dell XPS15 second-generation i5. Has anyone experience this problem?

  Hello

  1. what you did to solve the problem?

  audiodg.exe [Windows Audio Device Graph Isolation] file hosts the audio engine for Vista and Window s 7.

  All DSP [Digital Signal Processing] and audio processing is done within this file. Suppliers are able to install their own audio effects and DSP in the audio pipeline, which is then processed by audiodg.exe

  In order to correct the high CPU usage, disable audio enhancements addressed by the file audiodg.exe. To disable the audio improvements, follow these steps:
  a. right click on the speaker in the lower corner icon right.

  b. Select the playback device from the menu. A list of devices should appear on the screen.

  c. double-click the device that has a green check mark. The properties for the device windows should open.

  d. click the improvements at the top.

  e. in the list of improvements, uncheck all the, or check Disable all improvements.

  f. click on the OK button to save your changes and close the window.

  g. click OK to close the devices window of reading.

  I would also say that you use resource monitor to monitor the CPU usage.

  Resource monitor is a tool that allows you to analyze the use of the CPU, disk, network, and memory in real time.

  You can use the performance tab in the Manager of tasks to see how the CPU of your computer is used by Windows and other programs running on your computer.

  Reference:

  See use of CPU utilization and other performance information

  http://Windows.Microsoft.com/en-us/Windows7/view-CPU-utilization-and-other-performance-information

• Flag 23: Dealing with "high CPU usage." How can I reduce this?

  Hi, I have a HP Pavailion 23 which has been given to me as a gift. Therefore, I don't know. All I know is I'm a player who likes to play games based on Java and possibly watch the videos at the same time, when I try to do the lagg is important. I get notifications saying that Chrome has high CPU usage. I read something about changing my BIOS settings? I'm not sure.

  I would appreciate help on this. I have dealt with the hand of single task Forcers and I find it quite annoying.
  Thank you!!

  Geez... No love. ?

• Windows XP CPU running at 100% with no open programs

  I use Windows XP SP3 with 2 GB of RAM with a 1.80 Ghz Pentium 4 processor... The computer is VERY slow and lazy most of the time. Sometimes it's fast and the answer but then IT suddenly comes back to extremely slow and lazy - it's as if something is supported of the processor.

  When we look at the performance tab of the the task manager of the CPU usage is running between 80 and 100% when it opens any program or and for the desktop to appear.

  I ran Super Anti Spyware and found 69 threats that have been deleted.

  I ran Malwarebytes' Anti-Malware and it found 1 threat that has been deleted.

  I run ESET NOD32 Anti-virus and it was a clean analysis.

  I run the latest version of CCleaner and cleaned the registry and the tab Cleaner for the cleaning of temporary files, etc.

  I defraged the drive and also checked/fixed for disk errors.

  After that the CPU usage is running always extremely high with no programs open.

  Does anyone have any ideas as to what I can do or check, fix anything that captures the CPU?

  Thank you. Best regards, Bill Artman Kansas City - USA

  What is your system brand and model?

  You may be able to get clues with what is happening by using the Task Manager and maybe understand.

  You will always figure out what happens if you use Process Explorer.

  Download Process Explorer, so you can see what is 'really' currently running on your system, especially behind these multiple svchosts see you in the Manager of tasks running.

  Download Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  You'll like Process Explorer when you get the hang of it.  Process Explorer is the Manager of Windows taskbar on steroids.

  Process Explorer installs nothing so it won't slow down your system since it works only on request.

  Process Explorer can seem a little intimidating at first because it has so much information, but you will begin to make love the way it works when you're looking for performance problems.   You can even say EP you want it to be your new default 'Task Manager' value in the future.  You can always run the original tasks as Manager.

  Once you get Process Explorer running, expand the columns, made drag the corners of the screen for it's largest, etc., so you can see as much information as possible in the window.  Now you can really see what is running on the system.

  Here's a screenshot of my system when I use Process Explorer:

  http://img222.imageshack.us/img222/2567/ProcessExplorer.PNG

  The CPU column is usually the most interesting start with performance issues - which uses the most?

  It is OK and normal to have of multiple svchost processes running, but sometimes malware will hide behind them, as the malware knows that you will not be able to spot it in the Task Manager.

  Malicious software can disguise itself also seems to be a legitimate process of XP or he could hide under/behind other processes that you see running in Task Manager if you can't see the execution.

  The malware would trick you into thinking you must use a System Restore Point, run a repair install or reinstall your XP from scratch when you really don't.

  Looking at the display in process Explorer, you want the CPU most to be associated with the system idle process.  It's 'free time' on your system, so more time there, more free.

  If you look at the graphs of performance and see red spikes (or not) double click the graphic in the upper left corner to display the graph to use.  Move the mouse over any pics to see what are the causes.  Even if the Spike has already scroll screen, you can still move the mouse over the edge to see what caused.  You can also just wait for a pic to happen and then see what caused the Spike.

  To help understand your process svchost and what is running under them, read this article and you will be smarter than the average bear:

  http://www.bleepingcomputer.com/forums/Forum56.html

  Then with a few Google searches, you can watch every thing in PE and behind your svchost processes running and see what it is and decide if your configuration needs it or not and then decide what to do about this.

  If you think you have a svchost.exe process amok, executed using PE, you can right-click that offensive svchost, properties and on the Services tab and son, you can see which runs under it.

  There is a CPU column it will expand (make the wider column) so that you can see CPU.  Maybe you can spot what background process is so CPU consumption under the svchost.exe process.   Stroll under the svchost process and you will find it.

  You can also see what is running under each svchost simply by pointing your mouse on the svchost.exe process.  Some of them have just a things working under them and some will have several things (I hope that all the legitimate XP services) and some will have a lot of things.

  If you have a svchost process that is afflicted, which runs under your afflicted?

  No running process must defy reasonable explanation.

  First, see what you can discover using Process Explorer and then if nothing is obvious, see other things.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Extremely high after upgrade to Firefox 12 memory usage

  After I've upgraded to Firefox 12, I started frequently affected by hot air balloon Firefox memory usage extremely high (2-3 GB after a few minutes of navigation) light. Sometimes it will fall back down to a more reasonable level (a few hundreds of MB), sometimes it crashes (probably trying to garbage collect everything), and sometimes it crashes. Usually the thread crash cannot be determined, but when it's possible, it's in the garbage collection code ( https://crash-stats.mozilla.com/repor.../list?signature=js%3A%3Agc%3A%3AMarkChildren%28JSTracer * %2 js C + % 3A % 3Atypes % 3A % 3ATypeObject * 29% ).

  I managed to capture a subject: report memory when Firefox had about 1.5 GB and have attached an image.

  A couple of things I've tried. I have a lot of tabs open (although don't load it the tabs until the selected option is enabled), so I copied my profile, all kept my extensions enabled, but all my tabs closed. I then left an open page http://news.google.com/ and it worked very well for several days, while my original profile goes down several times a day.

  I also tried to disable most of my extensions, leaving the following extensions that I refuse to sail without:

  Adblock more
  BetterPrivacy
  NoScript
  PasswordMaker
  Views
  Priv3

  However, the problem still happens in this case.

  Don't know if this helps or not. I'm looking forward to trying Firefox 13 when it comes out.

  Never knew what was causing the problem, but have disappeared since the upgrade to Firefox 13, accidents and memory pathological use.

• High CPU usage by "System outages" and missing keystrokes in IE on all new HP laptop 15-r085nd

  I recently bought a HP15-r085nd (Win 8.1 with Bing), and right out of the box, I encountered this problem:

  After the awakening of the mode (usually after the first time to wake from sleep mode, but always after the second time), the process "System outages" has high utilization of the processor, up to 45%. The laptop then responds very, very slow. In addition, in Internet Explorer (but only in Internet Explorer, it seems!) strikes are missing out.

  I tried the following:

  -Implementation of all the updates of Windows, all McAfee updates and all of the updates from HP Assistent. No results.

  -Reinstall all the drivers, no results. Windows system restore: no result. Factory reset the recovery partition: no result. Then implemented all the updates again: no result.

  -J' tried to use Microsoft Xperf to diagnose the problem: it seems wdf0100.sys to blame for the high CPU usage. (In other words, if I have interpreted the results in the right way).

  -J' then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task Manager and disable all non-Microsoft services in msconfig. The result was that the high CPU usage of "System interrupts" occurred less frequently after the first time out of the way 'sleep', but still she always had after the second time to wake off mode 'sleep'. Uninstallation of McAfee seems to have the same effect, by the way.

  -J' then did some troubleshooting with the store were I bought it. They used a pilot program to install newer versions of the drivers. Also, in vain.

  Then they gave me another laptop of the same model (r085nd). It had exactly the same problems. So I think that all laptops of this model have the same problem! Does anyone know of a similar case with a laptop similar?

  -J' then did some troubleshooting with HP support. We have updated the BIOS (F.24), without result. We have made a few updates to additional drivers on the HP site, no results. We wanted to update the graphic driver Intel HD (sp65598), but we couldn't install it, an error message saying: minimum system requirements were not satisfied.

  I hope that the HP support can arrive at a solution (they wanted to deepen this). If so, I'll promise to post it here, because it affects probably other r085nd HP as well.

  In the mean time, I'd appreciate any suggestions, because I'm totally confused now. Someone at - it ideas? I will answer all the answers!

  I was contacted by HP Support again. After a new series of updates which included some updates everything new on the site of HP is solved the problem with high CPU usage by "system outages"!

  We have done several updates, so I know not that exactly solved the problem, but it is those:

  -New firmware BIOS: version F.33 (my bet would be that is the one that solves the problem)

  -New Intel chipset driver: 1.20 (sp69575.exe)

  -New driver Intel HD Graphics: 1.20 (sp69589.exe): 10.18.10.3958 (this one tried earlier, without solving the problem)

  -New driver Realtek card reader: 1.20Ap3 (sp69610.exe)

  I hope this helps other people with the same problem.

  Thanks to the HP Support team for their help with this problem!

  Moreover, the problem of lack of strikes in Internet Explorer (more use of CPU (any reason), the sequences of keys more are not registered!) still exists! I work around this problem by using Google Chrome. Again, I hope that this issue might get resolved as well! I nevertheless marks it as "Resolved" as the main problem is resolved.

• searchindexer.exe extermemly high CPU usage - days

  Not sure that to do, I rebuilt the index, manually deleted the record of data to index, completely removed, rebooted, and then reinstalled Windows Search from the Add/Remove Windows features, I also chkdsk/f had my records.

  When the Searchindexer.exe uses as much CPU as she can I checked with resource monitor and it is not read to leave or by writing to all files, just chip away cycles CPU.

  Edit: more information

  I created a dump of the searchindexer.exe and its opening with a debugger tool, it is the content

  Microsoft (R) Windows debug 6.2.9200.16384 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [S:\Tools\SearchIndexer.exe.dmp]
  User Mini with full memory dump file: only application data is available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows 8 Version 9200 MP (8 procs) free x 64
  Product: WinNt, suite: SingleUserTS
  By: 6.2.9200.16384 (win8_rtm.120725 - 1247)
  Computer name:
  The debugging session: Sun Nov 4 22:01:24.000 2012 (UTC - 07:00)
  System Uptime: 0 days 10:09:39.102
  Running time: 0 days 0:54:31.000
  .........................................................
  Loading unloaded module list
  ..........
  ERROR: The symbol file is not found.  Defaulted to export symbols ntdll.dll.
  ERROR: The symbol file is not found.  By default for exporting symbols for KERNELBASE.dll -.
  ntdll! NtWaitForSingleObject + 0xa:
  000007fc ' ret 5b172c2a c3

  also, I checked the thread problem in hacker process, here is the stack:

  0, ntoskrnl.exe! SeAccessCheck + 0x1ef
  1, ntoskrnl.exe! KeDelayExecutionThread + 0xc32
  2, ntoskrnl.exe! KeWaitForSingleObject + 0x1cf
  3, ntoskrnl.exe! _misaligned_access + 0 x 809
  4, ntoskrnl.exe! SeAccessCheck + 0 x 280
  5, ntoskrnl.exe! SeAccessCheck + 0x4d1
  6, korwbrkr.dll! DllUnregisterServer + 0x2f48
  7, korwbrkr.dll! DllUnregisterServer + 0x243e
  8, korwbrkr.dll + 0 x 12173
  9, korwbrkr.dll! DllUnregisterServer + 0 x 1696
  10, korwbrkr.dll! DllUnregisterServer + 0x62f9
  11, korwbrkr.dll! DllUnregisterServer + 0 x 6117
  12, korwbrkr.dll! DllUnregisterServer + 0x5db9
  13, korwbrkr.dll! DllUnregisterServer + 0 x 5882
  14, korwbrkr.dll! DllUnregisterServer + 0x6fa0
  15, mssrch.dll! DllGetClassObject + 0x3feba
  16, mssrch.dll + 0 x 19425
  17, kernel32.dll! BaseThreadInitThunk + 0x1a
  18, ntdll.dll. RtlUserThreadStart + 0x21

  I also deleted my Outlook data files and started from scratch with my emails, and makes sure the data folders are not on a concert.

  I installed all the updates that are available for Windows 8 and I also ran sfc/scannow.

  I would be grateful if anyone could offer any help at all, thank you.

  Hi entire,

  disable the service in the Services, restart the computer and then re-enable the service.

  I tried, I completely uninstalled from Windows Add/Remove Features service, rebooted the PC and re - he added, and same deal.

  Anyway I found is what the problem is, it's the korwbrkr.dll, it seems to be related to a Korean dictionary, as if the indexer is you are trying to index something with characters Koreans inside (not aware that I have something like that), and he throws a loop for I renamed the korwbrkr.dll to korwbrkr.bak and it has linked the dictionary file and removed from the search index and I allow the indexer to run all night and it shows that indexing is complete, and I have no more high CPU usage.

  I was dealing with high utilization of the processor of the indexer for weeks, now my system is at peace.

• RdrCEF high CPU usage

  Hello.
  First of all, sorry for my weak English level.
  
  A few days ago, I installed Adobe Reader DC on all servers of my Citrix XenDesktop 7.6 farm. All started well, but now I have problems with high CPU usage. I have seen that for each user using reader DC open between 1 and 3 processes with the same name, RdrCEF.exe. This process consumes a lot of memory and sometimes, according to the PDF file, use a large part of the performance issues causing CPU in other sessions on the server user.
  
  What is the process of RdrCEF? Phy it's open several times by user ? And above all, how can I prevent the use of this process as much CPU?
  
  I hope someone can help me.
  Thank you.

  
  

  Hi all

  We fixed these issues with our last update. I ask you all to update via Help Adobe software-> check the updates...

  Please let us know if you face this or any problem after update.

  -Thank you

  Sunil Soni

• TimesTen 11 g - direct connection jdbc get very high CPU usage

  Hi guys,.
  
  When I run my application with a direct connection, I get very high CPU usage... Can help me where can I fix this.
  This is the configuration I have.
  
  PermSize = 102400
  TempSize = 2457
  
  More, should one I include the LogBufferSize? How much should I put in it?
  
  
  Thank you
  
  John

  Well, the point to keep in mind is that overall CPU utilization will not higher with direct mode with a local server. In fact, it will be a little weaker because of the much higher efficientcy of direct mode compared to client/server mode.

  The usual rules apply here; You must decide on the maximum use of your machine (normally one trying to limit it to)<=60% for="" the="" most="" optimal="">

  Then you need to see how your workload uses the CPU. with TimesTen there is no blocking operation within the database for a single application thread can, if it does not crash on all external events such as queue of messages, etc. I/O, usually consume a whole CPU core (a large volume of work in the process of transformation). If he asks you to this nature then you want to limit the number of concurrent threads to the smallest reasonable number. Assuming that the machine is running just the application and TimesTen and nothing else and that you wish to leave a carrot free for activity of DB o/s and the background (for example, journal of hot flashes and checkponting) then optimal throughput and response time will be reached with three concurrent threads hitting the database. You can run course with wires more than that but the flow will not be increased (in fact it will decrease somehwat due claim etc.) and response times will certainly increase. For this application profile you certainly wouldn't want to use more than 8 simultaneous maximum son.

  At the other extreme is an application that has multiple concurrent threads, but where each thread spends much of its time waiting for some work to do and runs only makes for a short period of work process then returns to the wait. You can use several more concurrent threads than the hearts of processors for this application profiel. The optimal number will be determined by the specific workload, load CPU it generates and your maximum target of use of the system.

  None of this is really specific TimesTen. The main differences that TimesTen brings all this are:

  1. the workload of database now works on the same machine as the application rather than on a server separate from the DB so that it consumes resources on the application computer.

  2. in general, database interactions will result not in any idle time from a point of view CPU usage (as a consequence of (1) above).

  Ideally, your request will be designed and implemented so that the number of concurrent threads can be controlled as a parameter tunbable to allow you to adjust the workload generated by the application to the specific environment in which it runs.

  Chris

• I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 op

  I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 open, the memory usage does not go down and left to the 700 MB. Thank you for your attention. Cordially, Ricardo

  ID of the Crash

  BP-765e3c37-0edc-4ED6-a4e9-7ed612100526

  See http://kb.mozillazine.org/Firefox_crashes and Firefox plant - troubleshoot and prevent assistance fixing crashes

• Tecra M2 - stop hard on high CPU (turns off with no BSOD)

  Experienced stops consistent when the CPU is running at full during a little while.
  -J' mean 'stops' complete power cut with no blue screen of death where all is lost and the computer must be restarted manually.
  -by "high CPU", I mean when the processor locks to full use such that when you insert a column in a big Excel sheet with errors or if you want a large number of files and you open a video from the network or when you run a registry scan and antivirus analysis at the same time.

  The problem took place regularly for a few months and I can now make a case with greater predictability. Using the hardware monitor suite 'Everest', it seems that the problem occurs when the temperature of the CPU is located at 99 for more than a minute or more.

  This happens with some, but never when batteries run - then attempts to force the error, it will not be stopped if the power cable is released just before the drop point.

  In the cases of the problem, it seems to be a small error message appearing only a fraction of a second before the death of the computer.

  Each reference forum and help that I read would suggest the problem is related material and that the chip or the motherboard is overheating and need replacement. While the laptop is almost 18 months old, I bought a new ' everything except the screen and HDD "earlier this year, and was not prepared to accept the explanation without more tests.

  Kantonix Linux works very well and the CD starts seems to tax the processor as much as the same events that kill for me under XP.

  A few weeks back, I installed Windows XP on a second HARD drive in the Bay of hotswappable and noted the installation seems to work pretty hot computer and he died during the process. It has experienced no difficulties for while but, a few days after moving the HARD drive reinstalled in the primary position and after you have reinstalled a lot a lot of applications, the error started happening again.

  Last night I caught a few fractions of a second before the death, the pulling power and stop the process and allow me to see the error message (as mentioned above):

  -first message came from "TOSHIBA Power Saver" saying "a fatal error occurred at x 06" (not sure about the last bit) ".

  -second message was "THotkey.exe' saying 'could not load powrprof.dll.

  -monitoring of several hundred cases of the second message.

  Because of the error messages, I was not able to get a print screen.

  Solutions or even on ideas that would be very appreciated!

  Post edited by: DC-financial

  Hello

  According to your explanations and the information in your ad, I think that the problem is related to the software.
  You wrote something about energy saving. This Toshiba utility controls the speed of the CPU and the use of cooling modules.
  I think that this request could be responsible by the judgments. Try reinstalling this utility.
  In addition, check the configuration of the unique power plans. If you work only with battery energy saver using another mode of power supply as working on AC.
  I think you could check these consumption patterns and configure it.

  Verification of the cooling module is also not a bad idea. Maybe fans cannot work properly because of the dust and debris inside the books.
  I use the vacuum cleaner to clean the fans. CA? s an easy way to make it free of dust.
  But if you get it, you must be careful.

• Qosmio F60 - alert constantly high CPU usage

  Hello

  About 12 months ago, I bought a Toshiba Qosmio F60 computer laptop 6 GB.

  When exploring using games, facebook etc, I am constantly alert of my Norton informing that there is high CPU usage.

  I have asked around locally and advised to delete Norton because this may be the problem. I'm not eager to do what my subscription is still valid.

  I also learned the other day that this is a common problem with laptops Toshiba using 'Explorer' and that I should use "Mozilla Firefox" instead which would correct the problem.

  I am trying to arrange this.

  Can you please indicate if it is a regular problem with Toshiba laptops and reviewing the options above to try to address this problem.

  It doesn't really seem to my computer, it goes more slowly and when in the Manager tasks, it is constantly fluctuating between 5 and 35%

  I look forward for your reply.

  Thank you

  Melissa

  Hello

  This isn't a problem laptop buddy
  Norton AntiVirus is a good antivirus program, but it uses a lot of resources and my experience locks the CPU.

  I removed this antivirus software and now I m using the avast and Avira Antivir free Antivirus software. Both are freeware software.

  But I still use Internet Explorer. Of course, I also installed the firefox and chrome. All these three browsers are great.