Extremely strange computer!

Similar Questions

• Are Jan 2012 updates make my strange computer Act?

  Hello. When I allowed installs the update the next day, my computer was in sleep mode and my monitor was on standby as well. When you try to switch on the monitor it's sounds trying to turn but then it stops immediately and repeat the cycle. I could still see the screen briefly as it sparkles so I don't know if it's a hardware problem... the monitor was fighting to stay on after a few minutes he finally came but had many lines sporadically on the front screen it clears up finally. This had never happened before, and it did not start until after the updates. I don't know if this is a problem with updates of the window or the monitor, or a computer. I am running windows xp. This happens whenever I'm away from the computer for a long period of time, but after that it lightens it seems very well the rest of the time I use it. Don't you know what I can do to solve this problem? I already tried Fixit and while he pulled upward for errors I will always have this problem. Also just now it prompted me to do an another automatic update... is there another one posted for the 12 Jan? Any help will be appreciated...

  Hello

  -What is the error message you get?
  -Are what tool "fixit" you referring?

  The problem may be caused by a conflict of third party software. I would like you to put your computer in a clean boot state, and then install the updates.

  http://support.Microsoft.com/kb/310353

  Note: Follow the steps in the article to restart your computer as usual.

  In addition, reset Windows updated components by running the fixit tool and check if this helps solve the problem.
  Follow the link for what has a fixit: http://support.microsoft.com/kb/971058

• Extremely strange: Ipa works for the 'debugging device' but breaks down for the "deployment."

  Hello
  In both types of investment promotion, the application starts well, but if the app is respected for the deployment, it hangs at this point where the data is downloaded and written in a database. In debug mode, the app works very well every time and never shows an error. I'm completely stumped. Thank you. I really need your help.

  Hi Luke,.

  Can you please share your project with me? It would be useful in the investigation of the issue. You can attach your project here or send it to me akharban (at) adobe (dot) com.

• Strange problem with addinstance, first page not save

  So I spent some time designing a form for a local police department to facilitate their reports.  I'm having a strange problem using addinstance.

  Use the two separate sections of the addinstance form; subject/witnesses/victims and the narrative section.  The two sections have buttons add and remove additional if necessary pages.

  • The witness/subject/victim section works as expected, additional pages can be added or removed, and they are preserved when you save the document, and then reopen the document
  • The narrative section does not work as expected, other pages can be added or removed.  The problem comes when the document is reopened, the first page which is generated using addinstance is no longer present in the file, all the pages generated after the first page that has been deleted remains.  It is extremely strange, and I have no idea what is the cause.

  Some possibilities I have already looked at in

  • Document is saved in dynamic form
  • Type of the Interactive preview
  • form is presented in preview as a form xml dnymaic
  • automatically keep your changes to scripts to form when registering
  • I use acrobat x to activate additional features so that end users can fill in the form and save it using the adobe reader software

  Here is the link to the file, I have been unable to share via acrobat.com http://www.FileSwap.com/DL/kp2BTWSTQR/

  Any help would be greatly appreciated, I have no idea on how to solve this problem!

  -ian

  Hi Ian,

  I think you have little code in the form1 docReady event that are causing you problems.  There are also exceptions to come JavaScript, it looks like test code, but you got "display the console on errors and messages" in Reader/Arobat (Edit... Preferences... JavaScript)

  Good luck

  Bruce

• Satellite A350 - cannot disable Touchpad

  Hello

  I bought my new computer A350 laptop 3-4 weeks ago and I'm loving the sound QUALITY!

  In any case, I want to disable the mouse pad, but I can't. I have the guid of the user on my laptop, that says: Touchpad: by pressing FN + F9 toggles the function of touch pad. Unfortunately it does not work! When I press it nothing happens, I don't see a change in the touchpad icon, which apparently, so well done must have a big red X or something like that, but again, this does not happen.

  I also looked at the properties of the mouse of my mouse, and when I select the Advanced tab, then move the settings of the feature..., under the touch pad settings, there is no option to disable that is extremely strange. There is another button of parameters for what can I press on, but there is no option to turn it off.

  What should I do to disbale the touchpad, because at the time of writing these, pressing FN + F9 does not work?

  > Hi, thanks for the response. I am running Windows vista Service Pack 1 Home Premium that was already installed when I bought it. I don't know if I'm running the factory settings, nor have I ever heard of this?

  If you use the operating system preinstalled by Toshiba, then you use Notepad with the settings ;)

  In your case I would recommend reinstalling the touchpad driver; Synaptics and Alps Electric.
  In addition, there is a utility called tool Support Flash Cards.
  This module is an essential component of Windows systems and it is necessary to other original programs for TOSHIBA to work properly.

  The relocation of the VAP (value added package) is also recommended.

• HP Pavilion DV9292EU - product no. RW755EA - No Video driver for Windows 8

  My laptop was purchased in 2007 and ran from Windows Vista. Vista was so bad in 2013 at the beginning, I installed Windows 8 (at the cheap price).  I do not regret the change, but it left me with one problem...

  During the upgrade of the W8 display driver has been changed to the display driver Microsoft Basic. It has distorted the image on the screen.  It reduces an image North/South (so a perfect on-screen circle resembles an ellipse). A picture of a car seems extremely strange. I tried to download the latest driver on the HP site, but it will not let me install - error message says it is only for Vista, and the installation is complete. The HP Web site confirms that there is no suitable driver for installation of Windows 8 on my laptop.

  Is there no workaround solution for this please. Grateful for any advice.

  Peter

  Hi, Peter:

  There is that one way, I don't know to get the graphics to work directly with the W8 (and W7 too).

  Download and run this driver. You can get an error not supported operating system or something like.

  Conclusion of any windows error.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-70238-2&CC=US&DLC=en&LC=en&os=2093&Product=3357937&sw_lang=

  Now, go into the Device Manager. Click to expand the section graphics cards. Click on the graphics card of Microsoft Basic. Click the Driver tab click on Update driver.

  Select the browse my computer for Driver Software method, navigate to the folder of the driver that was created when you ran the above driver.

  This file will be located in C:\SWSetup\sp42635.

  Make sure that the include subfolders is selected, and the driver should install.

  After you restart, you should have the correct nVidia graphics display card installed.

• Mac Pro equipped with graphics cards

  (1) Apple certified repair done remarkable work or replacement of these cards, seemed as it did thousands due to schools, universities, colleges had all the problems that I did.

  (2) now did the-d option to initialize the data sent to Apple and have assigned Senior Adviser.

  (3) most recent problem is error codes and system dead slow on my second Mac Pro 6 hearts. Now, does not see my Amd hardware, which is extremely strange to say the least.

  (4) 2 weeks no words or calls returned Senior Advisor, still more serious delays to write make some income with new Mac Pro.

  (5) what did not work is not, the example is iMovie stutters sound.

  (6) final Cut Pro sound of of synk

  (7) k video from my new iPad Pro 4 who made 4 K video sent to dump not recognized on Mac Pro system after that reminder of graphics cards has been made.

  so waiting for words from Apple on the d option played 4 times.

  < published by host >

  Nope... but... all I can do is give you my experience. I got a G5 liquid that had major failure 3 times (was under AppleCare) and has been replaced with a Mac pro. I guess you have tried the usual, killer stuff pram resetting the PMU, trying to reinstall and update the operating system and various applications to this topic and all that, and... nothing. Apple does not read or respond to these forums, cmdrDenis, this place is strictly a user forum, and that's all. Save all your receipts, paperwork, document as much as you can and when you talk to Apple or an adviser, be polite, but pragmatic.  Screaming, yelling, Ranting and raving you will get very far.  If you go to apple.com/feedback and leave a comment there, someone can get back to you. Call the main line from Apple can be useful too, but about what, when and how

  I can't say. Apple * may *, in its sole discretion, replace a machine that has had too many major repairs, or repair, but it's Apple to do.  Maybe if you call your local Apple place, explain the situation calmly and kindly and ask to speak to another senior consultant or Manager, perhaps they can help you.

• Weird views Finder

  This has been a strange computer morning.  After re-booting, then stop for five minutes and start it again, I keep trying to find a necessary 'Word' file using the Finder.  This is according to 'Word', but I don't see it or the files of three main in the Finder.

  Here is a screenshot:

  

  It seems to be the only file on the computer that shrinks the first three files in the viewer of files no matter how little I do the real documents Viewer.  All suggestions and all help will be be accepted with gratitude.  Thank you!

  Try another look

  

• Horizontal lines and more

  I have a Mac OS X 10.7.5 who suddenly developed a problem with horizontal lines covering the screen and a strong vertical line on the right side (see pix). Sound will always continue if a video is playing, mouse and Tracker will answer but not affect anything (not open, close or move anything). The only thing that solves the problem is to power down. When I turn on the rear, there is a party in question. This has, however, happened twice in the last week... a little concerning that I use my computer in my lectures. I looked at different positions, but none seem to match up with this type of horizontal issue. All the ideas that do not involve me go to the Apple Store? (pathetic bank account)

  If someone answers, please use simple as much as possible terms, as I am just an archaeologist. I enter data, download and upload pix and videos, get the computer skills needed... not one of extremely competent computer people.

  Yes, you will need it dumb down for me.

  Thank you.

  

  What year/model of Macbook. This happens no matter if you are using an external monitor when there lines? If so, it could be your graphics card.

• El Capitan utility disk first aid fails - unable to unmount the volume for repair

  Question: Given the following error with Disk Utility first aid and success with diskutil check volume, I should consider my drive damaged or volume?

  After a crash of the system on my Mac mini (end 2012) running that OS X El Capitan 10.11.3 has experienced a kernel panic induced by the adapter USB Wi - Fi, I dutifully ran first aid utility disk on each volume on the disk, in order to ensure the integrity of system files.

  What I feel with disk utility (GUI) first aid:

  First aid process has failed. If it is possible to backup the data on this volume.  Click OK to continue.

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Updated support for the volume partition that

  Impossible to disassemble for repair volume

  Operation failed...

  (underlining)

  Additional information: I didn't have any problems with this disk volume. I use it only as a Time Machine backup destination. It is an encrypted volume OS X Extended (respect for case-sensitive). My concern involves only disk utility complaint that its "first aid process has failed."

  After reading the complaints in other forums that utility disk on El Capitan has been "dumbed down" and can not perform many of the functions that the utility of the same name used to be able to perform in previous versions of Mac OS (complaints, I can't confirm because I'm relatively new to MacOS - although extremely in computing with Windows, UNIX and Linux) (, so I didn't get to use disk utility a lot, before El Capitan), I decided to do the same "check the volume" that I knew first aid was trying to perform with the diskutil command-line app.  Guess what? No error!:

  What I have experienced with command-line diskutil:

  sudo diskutil verifyvolume disk9

  Audit file system began on disk9 6TBMacOS_1_Archive

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Check the file system

  Using the live mode

  Perform direct verification

  Logged more HFS volume control

  Detected a case-sensitive volume

  Checking extents overflow file

  Check the extended attribute file

  Checking volume bitmap

  The 6TBMacOS_1_Archive volume seems to be OK

  File system check exit code is 0

  Finished on disk9 6TBMacOS_1_Archive file system check

  I will finish success of diskutil verifyvolume that my disk volume is not serious and that Disk Utility first aid simply does not correctly?

  Thank you!

  -IlDavo-

  I think you might be able to do a repair of first aid, after you have disassembled the drive first:

  1. Run OS X by an external device (ex: USB mode, or external hard drive or disk target from another Mac)
  2. Launch the Terminal and run the following command umount f /Volumes/ (ex: umount f/Volumes/Macintosh\ HD)
  3. Then run disk utility first aid.

  I had this problem on a Macbook Air, I tried to recreate the image to work, so I didn't need to get anything off the drive. I tried to format the drive and reinstall OS X. So I don't know if first aid work after disassembly, but it worked without a doubt after that I did the first two steps above and then deleted from the disk. Not sure if this will help, but worth a try, I guess.

• Do not click on anything whatsoever on the Apple online store

  I have recently experienced this extremely strange fault when you browse through the online Apple store. I can't click anything. None of the links, hyperlinks, buttons, images or text can be clicked or highlighted. Everything is visible and seems normal, but I can't click on it. It is only if there is an invisible overlay in the html code that covers the entire page - even the top menu.

  The problem is not there when on the Apple.com regularly browsing iPhone, iMac or something else. But as soon as I click on buy or go to the store looking for a product I have this problem (for example on - http://www.apple.com/dk/shop/product/MLA22LB/A/magic-keyboard-- fransk - usa? e = 9 d fnod). I tried to open the website on Firefox and Chrome and it works fine - but not on Safari. Ironically, I knew only that on the Apple online store and not another site.

  Anyone have any idea what is the problem? It's really annoying because I use default Safari on my iMac and don't like to spend between browsers whenever I'm browsing through the online Apple store.

  Extra info

  When you use the tool 'Inspect element' wherever it is on the site mentioned above, he says only this container of :

  Close

  I suggest you only begin by taking the measures recommended in this support article.

• Qosmio G20 talks in his sleep in?

  Now, this may sound weird, but my computer speaking literally when in "stand-by"!

  This has only started to happen after I reformatted a month ago. When he is asleep, he speaks in this strange-computer voice says things like

  "Hello, how are you?

  then it waits about 5seconds and meets himself

  "I'm fine thanks, and you?"
  What is c? someone at - it? This serves a purpose?

  : D it s a funny theme :D
  Thanks allanf to clear up this laptop strange speaking ;)

• CP2025: Problem of software driver CP2025

  Problem installing software:

  Windows 7 (64 bit) on printer and custom pc worked fine. Installed the free download of Windows 10 and the problem started. SSD formatted and reinstalled Windows 7. Not able to install drivers CP2025, tried both original CD and downloads online.

  They would not install that it either I have tried. HP pilot program informed me that the system was not enough and that he would cease installation. What is extremely strange, given that the same pc was operational with printer and installed software.

  Any ideas?

  Just for starters I say I do assign assumptions when I write this while I am away feel free to ignore what I'm saying. Also your printer can not work properly with WIN 10 to what is a possibility as well.

  I'm willing to bet that the driver you download is a universal driver. Repeatedly universal drivers do not work like a PCL5, PCL6 or PS driver would be. In some cases when you go to the section drivers and downloads for your printer on the HP site, you can change the operating system to the different versions. Then you can possibly download an older version. If they are universals so sometimes you can shoot the pcl5 or 6 driver on the installation of the software they offer or on your cd. Open the archive zip 7 and in some cases, you can find a folder of drivers with the pcl5 or 6 drivers available.

  Perhaps few things to try.

• HP Pavilion 17-e050us

  I just bought an HP Pavilion notebook e050us 17. I tried in vain to find the plug to drive hard because I want to replace it with an SSD.

  This has been an extremely strange search, because I use computers for nearly 20 years, and previous years, details on the hard disk are plentiful and easy to find. Instead, all I can find is that it has a capacity of 750 GB and a speed of 5400 RPM and it is "Sata"; no mention if it's Sata 1, 2 or 3, but considering that it is a new model, it should be Sata 3.

  I guess it's a record 2.5 inches, but can't find this info anywhere or the other. I checked this site and the specifications of this laptop, but some black hole seems to have engulfed this information somewhere, or maybe HP has their trainees entered this information, and they don't have a clue either.

  I'm puzzled about why there seems to be some conspiracy or something to hide this information. I have never seen it before.

  Can anyone provide all the details about the detailed specifications of the hard drive for this model so I can get an SSD appropriate to replace? I need the size and I need to what type of Sata interface. I don't want to assume anything, because that the minute I do I have to return it and try something else, and I don't have that headache.

  Thank you

  No, do not have a recovery. If the SSD is smaller, then the recovery disks will not work and obviously your recovery partition when you remove the primary hard drive is gone. In addition, why waste all your settings and programs? Make a clone of the old drive to the new. Invest a little extra cash into a USB to SATA Adapter, connect the SSD as a drive external usb. Boot from a bootable disk cloning program (I use Acronis Home but there are many others) and do an operation of 'clone disk '. When you swap in the SSD it boot without error but will show the SSD as new hardware, ask you to reboot, and all will be good and much faster! There are a few settings that you need to do to optimize the operating system for an SSD, but not too wide. No need to defragment, for example.

  And you're overthinking this. Download any current SSD. SATA III is good. If you want a specific recommendation, the Samsung 840 is a good bang for the buck and the Pro 840 is expensive, but also good as it gets. Even if your motherboard is SATA II (and I think also that it TAKES SATA-III since it's so new), you will have zero problem. The only downside to an SSD is the expense, but once you've been there you'll never go back.

• Edition of Windows 7 Enterprise Technet

  Hi, I had a Technet Professional subscription until 31/01/2013. During the 12 months, I downloaded Win 7 Enterprise 64-bit MAK and the key for this software, used once in early January 2013 and it worked perfectly. Yesterday (Tuesday 1 July 13) installed on my pc of dev and got the following error, the error Code: 0x8007232B. Does this mean that I won't be able to use this software again and that my laptop that works this software also displays this error? It's quite annoying to think that the activation of multiple works only during the 12 month subscription and it is too expensive to continue to use the aforementioned software.

  After installing because I have never asked to enter an activation key for MS that was already extremely strange, can anyone please help me in solving this problem.

  You must enter the product key for business once installation is complete.

  Press Windows key + R

  Type: slui.exe 3

  Press enter

  Enter your product key, and then click next to activate via the Internet.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us