Eyedropper tool stopped working properly (CS3)

Similar Questions

• The crop tool stopped working properly.  Everything is reduced to 17.6 kb.  Is there any solution for this?

  All of a sudden the crop on 12 items Photo tool stops working correctly.  After selecting and cropping, the photo gets reduced to 17.6 kb, goes to the bar higher and cannot be reopened at the bar.  Y at - it a fix for this problem?

  glousta wrote:

  go to the bar higher and cannot be reopened at the bar.

  I don't know what that means. In any case reset the default cropping tool. To do this, on the options of the crop on the right tool bar look for a box with lines inside. Click and reset. Who can fix it.

• Liquefy tool stopped working properly need help ASAP!

  OK, so last night, I used the Liquify tool on a selected area of the image and it worked fine. Well, now when I select my domain and try to use it, it just distorts the space and does nothing else. The options and display of fluidity never developed. I think it's just repeating what I did to liquefy the last time that I used it instead of giving me the opportunity to do what I have to do. It just won't let me do SOMETHING with the tool other than warping (what I think is the "repetition" of the previous use effects) everything else in photoshop works very well for me, that's the only problem I have. Prior to this, it would break just when I tried to open to liquefy, but I fixed that by changing the video codecs/plugins to those who work with him so that he is no longer a problem, it doesn't freeze or anything like that. So why is he just repeat what I did last time? Why can I not USE the effect? Help! Laughing out loud

  Are you clicking on the fluidity of everything at the top of the menu filter where the last used filter has a Cmd / Ctrl + F shortcut, or in its usual position below the menu? If the former then hold down the Opt/Alt key when you click the top element (or pressing Cmd / Ctrl + F) to open the dialog filter instead of just re - apply the last used filter.

  

• ArcSoft Connect Daemon has stopped working properly

  I get this message about the Arcsoft Connect Daemon has stopped working properly.  What are the solutions to this problem?  Thank you.

  Go to: Control Panel, administrative tools, Services of control.

  Double click on Arcsoft Connect Daemon.

  Startup type: disabled

  Location status: stop

  Click on apply, OK

  If you do not use the uninstall program, it also stop him.

  If you use this program reinstall should fix the problem.

• Error - "Kaspersky Anti-virus has stopped working properly." in the Windows Vista-based computer.

  Original title: Phantom appearance of reference of Kaspersky Anti-virus in my system.

  I get a problem report "Kaspersky Anti-virus has stopped working properly." and "to resolve this problem, run the update automatic tool provided with I have never installed this program, and it does not appear in my list of installed programs, in fact I never heard before that." Why do I get this message? What should I do about it? (My security program is Panda Global Protection 2012, if by chance it has something to do with it.)

  I did a full restore, but the error has occurred three times today. I know that Kaspersky is not on my computer and has never been. I think it's a virus. http://imgur.com/vjcgF

• several programs have stopped working properly

  Hi, I am very concerned about my computer who acted very strange.

  I am running Windows Vista Home Premium, I think.

  It started about a month when I went to run Google Earth. A notification pops up saying that he could not communicate with the google server and therefore did not work. It was very strange because I've been properly connected to the internet. I tried troubleshooting by using the google Web site, but nothing has worked. I finally re-installed and still got the same problem. I uninstalled the program and have not tried to use it again. This is not my major concern, however.

  I also realized that Google Chrome and Internet Explorer do not work. I've been successfully using Firefox to use the internet, but for some reason, those other two programs do not work, even when the computer is connected to the internet.

  The final problem and the one that worries me the most because I am a writer and dearly need Microsoft Word, is that Microsoft Word has stopped working properly.

  When I start the program I get the message: "Word could not create the work file. Check the temp environment variable. »

  I check the temp environment variables which are on the right track, I know that it is: "% USERPROFILE%\AppData\Local\Temp.

  "I have also checked the registry editor, and under"Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"AppData is set on ' %USERPROFILE%\AppData\Roaming

  It was of all things, that I was told to check by others, and they all seem to be fine, but Microsoft Word still does not work!

  The only reason I included the issues I've had with other programs is because I think they can be related somehow, even if they have all stopped working weeks of interval.

  I would really help to get my programs to work! Thank you!

  Have you checked for malware?

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  Diagnose and repair Office programs by using Office Diagnostics crash
  http://Office.Microsoft.com/client/helppreview.aspx?assetid=HA012340761033&QueryID=swLFe7o9k&respos=7&RT=2&ns=Winword&lcid=3081&PID=CH100964821033

  Work with Office safe mode
  http://Office.Microsoft.com/client/helppreview.aspx?assetid=HP101407921033&QueryID=RvzFVrl-70&respos=2&RT=2&ns=Outlook&lcid=3081&PID=CH100622221033

  How to troubleshoot problems that occur when you start or use Word 2007, Word 2003, or Word 2002
  http://support.Microsoft.com/kb/921541

  How to re - register Word when problems arise to open files
  http://Word.MVPs.org/FAQs/AppErrors/ReRegisterWord.htm

  TROUBLESHOOTING IN MICROSOFT WORD
  http://www.personal-computer-tutor.com/NNTWord.htm

  Internet Explorer stops responding, stops working, or restarts [Guided help]:
  http://support.microsoft.com/gp/pc_ie_intro:

  Use Reset Internet Explorer settings (RIES)
  http://support.Microsoft.com/kb/923737#appliesTo

  Tips for solving problems with Internet Explorer
  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  http://www.Google.com.au/search?q=%22Word+could+not+create+the+work+file.+check+the+TEMP+environment+variable.%22&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = JLo6TOOXE8qXcba09foO

  Have you tested in "Safe Mode with network" (Windows) or Normal Mode, but with another user?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

• The radial filter has stopped working properly and I need help.

  The radial filter has stopped working properly.

  When I turn it on and say change the exposure, the effect occurs

  But there is no way I can control the size or shape because no border will appear some that I'm working "blind".
  

  With the active filter, press the H key to hide or reveal the tool.

• Help... my tool stopped working

  I don't know what I did to break.  One day it worked fine and then I created some custom settings (for setting tool), and then it stops working properly.

  That's what I see:

  When I click on the Brush tool, then click on the image, nothing happens.

  When I click about to see where I painted, rather than get the bright red in these areas, it shows just a light opaque red.

  It's the only thing that is not working properly, and I'm in a lot of trouble because I use to work.

  Can someone please help?

  When you choose the tool, don't you see these settings? See how the "flow" is set to 100?

• iMovie suddenly stopped working properly when editing

  Hello

  I worked on a project basis in iMovie when it froze and stopped working properly.  I decided to force smoke but every time I have opened since then, it still does not work right.  (Can't see the project in the upper left window, can't see the cue for where you are in the video, cannot change and several other things).

  I tried the things:

  Restarted my computer twice

  Tap, it turns off and unplugged for more than 20 minutes before restarting

  Has sought the apple.com.imovie.plist files in the preferences, but they do not exist (so can't remove them)

  I use a macbook pro with the latest operating system and running iMovie 09 (version 8.0.6)

  It was working fine until something "reversed".  I think I just change a duration of the clip when he went weird on me.  It was supposed to be a very simple project that I could finish quickly and now it turns into a "big thing"!   Advice please!

  I tried and it seemed to work.  The only part I did was the film the iMovie file plans on my desk.  Then I edited the clip and it exported fine.  I had trouble getting images will appear and abandoned on that because it was not necessary in this case...

  I had the same problem and today met with a representative of Apple Care. Here's what he told me. Quit iMovie; go to computer > movies and move the folder of projects iMovie on the desktop. Open iMovie; Create a new test project using footage of the event library. Attempt to export it or do whatever it is you were doing in the crash (selection of titles below a certain rank in the window of securities done as well mine accident that export). If you do these things, and iMovie goes not down, the problem is caused by a corrupted movie project. (Although the representative wouldn't say, iMovie is originally the corruption - and the problem lies in securities - information on this below). Just have something corrupted in the project library will make the program crash, even if you are working on a new project. You must re-create your file piece by piece, see if it exports after each addition to see if the new addition is at the origin of the problem (choose the film because it's faster). I managed to recover all the video edited more than transitions by clicking on a movie clip in the corrupt project and selecting all and copying and importing into a new project (even if in the meantime, I had to open and close iMovie to drag this project corrupted on the desktop as it kept crashing). I discovered that a particular type of headline - organic - was this project and program crash - all of the titles. When I tried it add to the project rebuilt, it crashed. When I went to the old file was corrupted and tried to remove this title, it crashed. When I tried to remove the clip that had this title on this subject in the former, it crashed. The transitions that I used worked well (although not sure if all of them would be). Music, photos, excerpts from films, etc. all beautiful. The problem with iMovie and it needs a fix! But I was able to restore my project - I like less the style of the title - and export using this method.

• Satellite A120 - display stops working properly.

  Hello

  I am trying badly to turn this problem on my own before taking my laptop to a retailer for service.
  My Satellite A120 screen stopped working properly. Can I use it with an external LCD or VGA monitor and it works fine.

  It appears on his own > only< when="" it="" is="" set="" to="" 'safe="" mode'="" with="" or="" without="" networking.="" but="" when="" toggling="" in="" conjunction="" with="" the="" fn/f-5="" keys="" in="" normal="" mode="" the="" laptop="" display="" fades="" to="" gray="" or="" black="" every="">

  Is it a problem of laptop computer profile, a hardware problem or a problem with the BIOS of the laptop?

  * This laptop has never been joined to a network environment. Only been used by one person for use at home or school.

  Thanks in advance for your suggestions!

  It's strange, but you should try to reinstall the laptop with the Toshiba recovery disc.

  Maybe you should first check the Toshiba website for a new driver and BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Office Pavilion Elite HPE message: AMD/ATI Video Driver has stopped working properly

  I have a Windows 7 Desktop HPE-410y, this morning, that the flag of the action center was at the bottom of the screen.  I clicked on it and there was a message: AMD/ATI Video Driver has stopped working properly.  He also said I should click on a link for a solution to this problem, but of course when I made the site of HP said that the page does not exist.

  Maybe say if you have in fact noticed nothing else Action Center indicator would be useful.  If it seems to you that the computer was OK and run satisfactorly, then perhaps he had already solved the problem.  Usually reviews can occur if a program did unexpected things and crashed the video driver, then the driver recovered.

  HP site can be set to an old page.  The real driver has not been updated recently on the HP site.

• Programs stopped working properly on my new Windows 8.1 Pavilion

  I recently bought a HP Pavilion with Windows 8.1, and it was fine for several days until that one day almost all of my programs stopped working. Browsers will open and load the new tab, but then appear not to respond. All my games or their pitchers will start but will then stay here and won't do anything. If they have a progress bar, it will be 0%. I managed to open a game player single steam but the game itself closed to the time wherever I tried to start playing. Some RTS a few years ago was the only thing that still worked.
  My anti-virus software (McAfee) also will not open, but I see in the task manager that there a lot of processes running. The percent use of my CPU, memory, and disk were not overloaded either. I was not at all the sites that Web of Trust have not scored green so I doubt that it would be a virus, even if the main computer on my home network has some nonsense on it.

  RedRocky54,

  Welcome to the HP Forum.

  I'm not sure what the other computer on your network has to do with your new laptop - unless they have both started to get into trouble at the same time - in which case I suppose it's possible that there is an infection or incompatible Update shared by both computers.

  It looks like the system may indeed be infected - or at least could have been assaulted with a bad update.

  System restore

  You can try using system restore - if you can find a usable restore point, i.e. a date you can return before the problems started.

  The Windows system restore 8

  ============================================================================

  Discount

  It is sometimes easier to start over if you don't know what to do next and your diagnoses and anti-virus tools stop working.

  In any case, if you have run out of options on how to proceed, then you might consider that the computer is indeed again: you have had not long ago and you have no time to install more than a certain number of programs on it.  You might consider that it may be time to start over.

  There are a certain number of options that can help you do exactly that come built-in to your operating system.

  HP PC - Refresh Your PC to solve problems (Windows8) - c03538721

  Microsoft Windows:

  How to refresh, reset or restore your PC

  Understand the same update will eliminate your programs installed - you need to reinstall your program steam, for example and your browser (with the exception of Internet Explorer).  You need to reinstall everything that came with the system in the first place.

  In other words: READ before you make the leap into the options.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Catalyst Control Center window will appear to indicate that the program has stopped working properly

  Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

  Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

  Jim

• PX Engine has stopped working properly

  Hello

  Yesterday, I turned my computer off and the next morning, when I first started this new next IE opening the page automatically:

  http://WER.Microsoft.com/responses/response.aspx/17604/en-GB/5.1.2600.2.00010300.3.0?SGD=019a5517-6c13-4507-a7a5-cf09b6fd7470

  By saying:

  Download updates for has stopped working properly. To resolve this problem, see the software Roxio Web site to download and install the update: Click here for online access to the Web site for the Roxio software update instructions And when you click on the link, has been redirected to the following Web site:   http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms By saying: PX engine - Description and download Knowledge base article: 000070GN.   Print this Article   Question Describes the PX engine and where to download them. Resolution Engine PX Roxio/Sonic Solutions, is what allows to burn and compatibility of optical media such as CDs and DVDs. An update of PX engine guarantees full compatibility with the latest players and media. Each new version of the PX engine is backward compatible with all previous versions of the Sonic Software and most of the Roxio software. Here is a list of compatible software titles: Easy Media Creator 7.5 and liked VideoWave 8 and higher MyDVD - all versions RecordNow - all versions DVD for Photostory DVDit - all versions BackUp MyPC - all versions Simple BackUp - all versions Download: Engine PX 4.18.16a (updated 8.18.09) To install the PX engine update: Download the latest version here on your desktop. Unzip the file. Double-click on the .exe installer and follow the instructions on the screen. Note: The PX Engine Setup may require a restart after the installation.

  So, it is a fake website, or is it ok? I'm a little worried, because I have a small Toshiba laptop with no CD/DVD-ROM. And to be honest, a few weeks ago I bought a Microsoft Office 2010 Professional Plus and had problems with the installation. Since then, I got the blue screen twice by saying me serious error. So, would be - that or else, I need to be aware of?

  Thanks in advance!

  Danielle

  ImgBurn does not use the PX engine,

  However other software may install it.

  For example, Winamp can install if you do not uncheck 'Sonic Ripping/ardent support' under 'Media engine' during installation

  I would say that it is safe to install the PX engine update if you're headed there by Windows Error Reporting.

  We could create a system first Restore Point.

  However, the PX engine update is unable to solve the problem.

• I get the following error on my windows XP pc _ "ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PC

  I get the error message on my Windows XP pc
  "ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PC

  How can I solve this problem?

  What do you do when this happens?

  You can try to find an updated driver and then update your driver to determine if it solves your problem.

  Take a look at this article by Intel: http://www.intel.com/support/graphics/sb/CS-009483.htm