Help... my tool stopped working

Similar Questions

• The crop tool stopped working properly.  Everything is reduced to 17.6 kb.  Is there any solution for this?

  All of a sudden the crop on 12 items Photo tool stops working correctly.  After selecting and cropping, the photo gets reduced to 17.6 kb, goes to the bar higher and cannot be reopened at the bar.  Y at - it a fix for this problem?

  glousta wrote:

  go to the bar higher and cannot be reopened at the bar.

  I don't know what that means. In any case reset the default cropping tool. To do this, on the options of the crop on the right tool bar look for a box with lines inside. Click and reset. Who can fix it.

• VMware tool stopped working on Ubuntu 11

  VMware tool stopped working on Ubuntu 11 after uppdating guest operating system.

  When you try to reistall with "sudo-i vmware - install.pl' script return"command not found""

  Cool Ubuntu 11 shared installation folder works fine. After update of Ubuntu running VMware tool running collapsed after the reboot. Same error on Ubuntu 10.04 after the last update and restart the computer. The host is Win7SP1. Player 3.1.4 build-385536

  However, you don't need to enter the console root,

  sudo some_command, is a kind of shortcut to run commands

  as root (or another user) without entering in / connect

  (permanenetly, until the disconnection) it.

• Time protection real HELP in MSE stopped working after running the utility in Windows Live OneCare cleanup tool?

  Protection in real time in MSE stopped working after running the utility in Windows Live OneCare cleanup tool? Error Code: 0x800705b4

  Hello Wally,

  Thanks for posting your query on the Microsoft Community.

  The question error codes and the description that you get suggests that you are facing problem when using MSE. This problem may occur if other security software, such as antivirus, antispyware and antimalware programs, are totally or partially installed on the computer.

  I suggest to change firewall security settings or disable temporary security on the system software and try using MSE and see if it makes a difference. How to temporarily disable security software, you can view the article mentioned below.

   

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  For more details, please see the article mentioned below and see that it helps you to fix the problem.

  Real-time protection lights in Microsoft Security Essentials

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Text tool stopped working.

  My tool suddenly stopped working.

  If I try to put some text, it seems to work in what I see a bounding box and all that.

  But I do not see the type itself.

  And nuance in the control panel Gets a "?" to place a color.

  I reinstalled Photoshop CS4 and it still occurs.

  The only cases I can think it could possibly is 1. I had a recent update to Acrobat and 2.  (and that's when it happened) I copied the text from Illustrator and tried to paste it in Photoshop. Don't know if one of these two is weird but I thought I would mention it.

  I'm on a Mac Pro 2008 with 8 cores, 16gig or ram running the latest updates for Leopard.

  Can anyone help? Not being is not able to use the type in Photoshop is a disaster.

  Have you tried to reset the text tool?

  

• quick selection tool stop working

  Suddenly the Quick Selection tool leaves working in photoshop cs6. Other tools of work. I rebooted and set the preferences of all the original settings.

  Any help really appreciated.

  Thank you

  Joe

  Hey Joe,

  Suggest you to reset the Quick Selection tool and restart Photoshop and try it again.

  To reset the tool:

  1. Select Selection fast Tool.tool

  2. right click / Control click on the drop-down list at the top and choose Reset tool

  3. Restart Photoshop

  

  Kind regards

  Assani

• Liquefy tool stopped working properly need help ASAP!

  OK, so last night, I used the Liquify tool on a selected area of the image and it worked fine. Well, now when I select my domain and try to use it, it just distorts the space and does nothing else. The options and display of fluidity never developed. I think it's just repeating what I did to liquefy the last time that I used it instead of giving me the opportunity to do what I have to do. It just won't let me do SOMETHING with the tool other than warping (what I think is the "repetition" of the previous use effects) everything else in photoshop works very well for me, that's the only problem I have. Prior to this, it would break just when I tried to open to liquefy, but I fixed that by changing the video codecs/plugins to those who work with him so that he is no longer a problem, it doesn't freeze or anything like that. So why is he just repeat what I did last time? Why can I not USE the effect? Help! Laughing out loud

  Are you clicking on the fluidity of everything at the top of the menu filter where the last used filter has a Cmd / Ctrl + F shortcut, or in its usual position below the menu? If the former then hold down the Opt/Alt key when you click the top element (or pressing Cmd / Ctrl + F) to open the dialog filter instead of just re - apply the last used filter.

  

• Help! My tools stopped working

  I'm on a MacBook of 2010 and joyously generates pages when suddenly selection tools became the symbol of the hand tool, now, nothing works.  What in the world would cause this? I trashed preferences, but that did not help.  Can someone please help?

  I don't want to offend you, but I would check and make sure you really trashed the prefs properly. It's a little more complex for ID than some other Adobe applications if you do it manually.

  See replace your preferences

• Windows Help and support stopped working error8E5E03FA

  using Windows Vista and supprt worked Ok but stopped for some reason error 8e5e03fa, also impossible to install critical updates. any help?

  Hello

  You can view these methods:
  Method 1:
  I can't open the help that was created in Windows Help format (WinHlp32.exe)
  http://support.Microsoft.com/kb/917607
  Method 2:
  Try the SFC scan on the computer.
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
  Reference:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  
  http://support.Microsoft.com/kb/929833
  Windows Update problem:
  You can view these methods:
  Method 1:
  Access the link below and run repair to reset the Windows Update components on your computer. Try to install the updates.
  http://support.Microsoft.com/default.aspx/KB/971058
  
  Method 2:
  If the problem persists, you can try the steps below and run Windows Update on your computer. It could help us solve the problem.

  1 restart the computer in safe mode (to restart in mode safe keep pressing F8 on reboot).

  2. click on the start menu and in the search box start type CMD.

  3. in the list right click on CMD, and then click Run as administrator.

  4. at the command prompt, type net stop cryptsvc.

  5 rename C:\windows\System32\Catroot2 Catroot2.old.

  6 open the C:\windows folder, and then rename the folder C:\Windows\SoftwareDistribution as SoftwareDistribution.old.

  7. at the command prompt, type net start cryptsvc, and press enter

  8 restart the computer in normal mode

  9. run updates and check if you are able to get the updates without any error.

• Photoshop CS6 recently why Marquee and Lasso tools stop working correctly?

  I purchased Production Premium CS6 several years.  Recently, my marquee selection tool and lasso will not bring a selection once.  In order to reuse them, I have to restart Photoshop, but can only use the tools once. I can't use the shortcut (Ctrl Alt Shift) when opening Photoshop to reset the default preferences because Photoshop does not open when Ctrl Alt Shift are pressed and held.  I tried the manual technique to reset the preferences by removing the preferences of psp file.  But the end result is the same - the tools work only once.  It's happening now with the type tool as well.  I tried to see if my graphics card is causing the problem, but it's not.  In fact, the selection tools work not at all when I 'use the graphics processor' unchecked.  I have the latest update for Photoshop: 13.0.1 x 64 what do I do now?

  Well, the problem has been resolved.  I recently installed the software synergy to share my keyboard and mouse between two computers.  As soon as I stopped synergy, the selection tools in Photoshop worked properly.  Synergy also caused selection problems in Microsoft Word.  Thanks to all those who responded so quickly to my question.

• Layer tool stopped working in Photoshop CC

  Help!   As a photographer, I use Photoshop Actions the two purchases and created myself.   All of a sudden, the layer option ceased to work, if I create a new tool in layers, or run

  an Action, it will not work.   My software is all day, and my computer has been restarted.   I also deleted the Actions and the reinstalled from the original file.  Still nothing.

  When Photoshop starts to behave strangely

  First check all the parameters of tools in the toolbar Option,

  Reset then all the tools

  Third Reset Photoshop's preferences.

• Why has Ruler Auto Crop tool stopped working

  I have been demo'ing CS5 last night (for a Photographic Society) and to my dismay, when straighten an image using the rule, the Auto Crop feature did not work.  It has worked perfectly before that  Today (at home), I find that I am in the same situation ~ automatic harvest does not work.  I have somehow turned this function?  I looked and can not find any 'options' at the start-up or stop automatic cropping function.

  I'd appreciate any help anyone can offer to restore the Auto Crop feature ~ if possible.

  Thank you.

  BJC (Barry Colquhoun)

  Don't know not, but you can try the cure to ole while deleting the prefs when I read this: average keyboard is the fastest.

  http://forums.Adobe.com/thread/375776?TSTART=0

• text tool stops working after several type of layers, any idea why?

  Using CS5 update on Win 7 64 bit machine

  I often use an image unique background (a map) and then add multiple layers of arrow shapes and text to serve as a section for presentations of travel titles.

  Once I did two or three layers of different type, the tool just closes.

  It will not create a new layer and if I make a new layer, and then click the text tool, the bar appears but it is very small and no type will appear when I enter the text.

  I have to go back to zero, start an entirely new document or restart PS to get the tool text to start working again.

  Any ideas what is happening?

  or is it evil spirits?

  TIA,

  Lew

  EDIT

  I discovered that the guy is there, but the size is tiny.

  If I reset the size of 72 to 1072 is visible

  If the size is gone for this document.

  A new document is fine, but this document is dedicated.

  
  

  Check the resolution of the document - it is probably something weird.

• Move tool stopped working

  When I click on the move tool in my Adobe Elements 10 Photoshoped, it does nothing now. I have to click on the specific layer if I want to switch to something.

  On the above tool options bar, select "Auto select layer".

• Eyedropper tool stopped working properly (CS3)

  Hello

  recently, the eyedropper in CS3 seems to copy characters options, only leaving the paragraph options far - no matter if any paragraph style is attached or shift + pipette is used. The only reason why I can think of is that I uninstalled my ID CS2 (finally!) a few days ago: maybe it affected it somehow. Any ideas? Reinstall or something worse?

  With the best,.

  p.

  You did the pipette doubelclick icon in the tool bar and check the attributes have been checked?