EZ Vinyl converter only picks up the sound for a half of the stereo

Similar Questions

• My Apple TV is only to play a sound on my iPad but will not show the film?

  My Apple TV is only to play a sound on my iPad but will not show the film?

  Welcome to the Jennifer Apple community.

  Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.

  If it is supported

  these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your mobile device.

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• How to convert only the first false true after a series of real values

  Hello

  I would like to know how I can convert only the first value false true after a series of true values. For example, I want to make the TTTFFF to TTTTFF.

  
  

• During the creation of domestic demand, we enter the destination location, but when IR is converted to ISO how this system pick up the customer?

  During the creation of domestic demand, we enter the destination location, but when IR is converted to ISO how this system pick up the customer?

  Hello

  The location is added to the customer (internal part).

  Kind regards

  Isabelle Syed

• EZ Vinyl Converter does not work not recognize itunes.

  I downloaded the latest EZ Vinyl converter and itunes update to use with it. However whenever I click on the icon to use it it tells me that I have to download itunes, even if it is open there! I can't go beyond that point.

  I used it successfully for a couple of years and returned to it again after that a long period so need the most recent version that allows to identify tracks separate etc.
  Can I have erred by putting the original disc that came with the ion bridge record back in rather that just go straight to the Web site. The icon of the ion came and shows something called "Sound Soap" that requires a lot of questions I can't answer. I have some unintentionally downloaded some sort of Trojan horse?

  Hello

  There is a tab on the homepage of Ion Audio Support.

  Under Support, there is a link with their community

  I suggest you try there.

  http://www.ionaudio.com/ezvc

  See you soon.

• Microphone picks up foreign sounds other than my usign speech recognition speech.

  Only to learn how to use speech recognition on my Windows 7 laptop.

  Training of speech for Setup microphone went very well...

  .. up to - the microphone picks up foreign sounds other than my speech.

  It displays the message title that was it?

  I then wait for the message to disappear before I continue to talk.

  There are some answers that I can talk to that speech recognition is programmed to accept for that matter?

  Thank you

  Hi John,.

  I understand the inconvenience caused to you.

  Rest assured that I will do my best to help you solve the problem.

  I would like the links and check if that helps to properly use speech recognition.

  Dictate text using speech recognition

  Common commands in speech recognition

  Set up speech recognition

  What can I do with speech recognition?

  Hope this information helps. If you have any other questions about Windows, please let us know.

  Thank you.

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular

• After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  Did you try a reset of the SCM and hope that the problem is solved?

  • Reset the management system (SCM) controller on your Mac - Apple Support

  What does the computer when started in safe mode?

  • Try safe mode if your Mac does not end commissioning - Apple Support

  You have a copy of backup clone of the previous OS X and its applications?

  This is usually a preventive measure to be still able to use the Mac

  an upgrade path does not work as expected, so you have alternative.

  Or you can return to the configuration already in place, in offline mode.

  In any case...

  Good luck & happy computing!

• Digital inputs only noisy when the laptop is plugged

  I had problems with loops of Earth and power supplies for laptop in the past.  But it is the first time I got it so wrong that it makes the digital inputs which are both related to the ground and the debounced software cannot be used.

  It is NOT material OR.  It's a DT9816 of data translation, a USB DAQ Multifunction with small budget.   The laptop with the problem is a refurbished Dell, with a very obvious not Dell PSU who throws to the top of the warning in the BIOS and scales back from the processor.  (Danger Will Robinson!)

  The problem with the digital entries shows only upward on the Dell when it is plugged into a power outlet.  On all other machines and with the printer unplugged Dell, digital inputs floating.  But those that I have attached to the Earth is rock solid and work very well.

  What surprises me is more than the noise is so bad that even tied to the ground with a half second debounce, I get always false triggers.  I have not brought to power, but considering that it sounds really loud, I suspect that it looks pretty bad.

  I think I'll try a powered USB hub.  If this does not work, then I think that the customer will have to replace the power supply on the laptop.

  However, I was surprised.  I used a lot of USB DAQ hardware, and it's the first time I've never seen a problem like this.  The NI USB 6002 I tested on this same laptop does not seem to show the same problems.  Even if it is true that this is a different software and the test was brief.

  I'm curious to know if other developers have found something similar in the past.

  I can confirm that using a USB hub external powered eliminated the problem of noise in the original post.

  Interesting things.  I had not seen this before.  Now, I wish I had again the NI DAQ USB I had here last week so I could test that.

  Looks like I'll use a hub powered on this project.  But I think I will recommend always replace this power.  Although a lot of noise coming from the power supply, probably isn't good for nothing plugged it... or even sitting near him.

• Built in microphone will not pick up sound for Windows speech recognition

  My Dell Inspiron 1545 with a built-in mic, but for some reason any it don't will pick up any sound at all for the Windows speech recognition (Windows Vista).

  Hi Matthew,
   
  Thank you for writing to Microsoft Windows Vista Answers.

  Have you checked to see if the correct settings have been selected for the microphone in the computer?

  Try to access the control panel > Sound > Audio. Check the recording tab if the Microphone is on and working. Click on set up and once you see the working driver (i.e., reacts to your voice), right click on it and the default value.

  Later try to put in place the program of speech recognition in all programs > Accessories > accessibility > Windows speech recognition and try settings different microphone to the edge we respond to your voice.

  You can also try to update the audio drivers. Access the link below and try to download the drivers.
  http://support.Dell.com/support/downloads/DriversList.aspx?OS=WLH&OSL=en&catid=-1&impid=-1&SERVICETAG=&SystemID=INSPIRON1545&hidos=WLH&hidlang=en&TabIndex=

  Also access the link below to troubleshoot the integrated Webcam and digital Microphone array in PC Dell laptop:
  http://support.dell.com/support/topics/global.aspx/support/dsn/document?c=us&l=en&s=gen&docid=397D0C4AF7AA90D8E040A68F5B283A3E&journalid=6DD6C133CFD8091CE040AE0AB5E16CFC&Query=d2ViY2Ft&SystemID=INS_PNT_PM_1520&ServiceTag=&contenttype=-1&os=-1&component=-1&lang=-1&doclang=en&toggle=true#5
   
  Hope one of these AIDS.

  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Transferred file xp laptop visa vidio. Has received the record of voice only and not the vidio

  Transferred video files from xp to laptop of visa.  A received voice only and not the video file.  Now, I have that video file without sound on the xp and visa phone only plays the sound.  How can I fix it?

  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in graphics issues, including partial transfers (sound or video only) will be more than happy to help you with your problem.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• BlackBerry smartphones can not change 'Sounds for the selected profile' or create new ones

  I can't change any of the other sounds in my profiles or create new profiles.  I can switch between them and change notifications as expected from fort to vibrate to silence.  When I select 'Sounds for the selected profile' I get a transition of the screen as he opens the new screen, but then disappears.  I tried to create a new one, but the new profile button and menu option do nothing.  I upgraded to 6.0.0.246 in hope, he could solve the problem, but it didn't.  Can I change the ringtone and sounds for contacts only.  When I arrived at the torch, I could change and I even created a new.  Any ideas?

  delete nimbuzz, berrybuzz or any other instant messaging applications, and then restart the device

• Stereo mix do not pick up any sound.

  Hello

  I've been messing around with this problem for almost a month now. I have Vista and Windows 7 on different partitions. Stereo mix is not picking up all the sounds in Windows 7 (even though I enabled it), while it is very well in Vista.I have tried to reinstall and update drivers Realtek, setting the stereo mix as a default device, still nothing. I see, it is enabled, but there is no sound coming from it. I have installed every possible update, but nothing happened. I wonder if there is another solution that I have not yet tried, make stereo mix to work with Windows 7.

  I would also like to know if there is a way to create something like stereo mixer, such as a virtual recording device that would get sound from my headset/speakers. Or just make headphones a recording device.

  Thank you.

  Hello

  See this link:

  http://social.answers.Microsoft.com/forums/en-us/w7music/thread/f39c03b7-3ffa-48F0-A98E-924795dfb7cc/

  It will be useful.

• Game of demand does not pick up the good period open to active fixed from the SQL statement

  Hello

  We have a demand that could kick off the simultaneous application of the value: Ixr: list of asset by period and Ixr: reserve book report.

  
  

  ON overall demand, we set the parameter: default period based on a SQL = select period_name from FA_DEPRN_PERIODS where book_type_code = 'PER2011' and period_close_date is null

  
  

  The query runs with the good period, until we open the new period, the game application will still come closed period.

  When I run this script on the database, it gives the correct name of the open period.

  
  

  Why all the demand does not pick up the open period?

  
  

  Rock
  

  
  

  Hello

  When planning, the parameter values that you gave when planning will not change.

  For the test, for a simultaneous program, I create a parameter and has given the value 100 tank and default type sql statement and the value as below.

  Select to_char (sysdate, 'dd-mon-yyyy hh24:mi:ss') of double

  If, at the time of the program, it shows a default value such as the date and time with seconds. Then I planned it for every minute.

  When you check in for each race it is seen the first time only, it does not.

  so in your case, you must plan its new after change of period.

  Hope this will help you...