Graph XY on the custom user Interface

Similar Questions

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• Shared "Top N" gets access denied - the custom user interface

  I shared some dashboards for a standard user to vCops the custom user interface, and the "Top N" widgets do not work.

  So far, everything has been fine.

  I shared a dashboard home, as well as a vCops of the box and a pak of SAP management dashboard.

  All widgets 'Top N' display 'access denied to the requested page.

  Other parts of the same work of dashboard (home).

  Any thoughts?

  There is a permission that you add to the group to which you share the dashboard. There are permissions to a 'Top - N analysis' you must give to this group. In the contrary case, the refusal of access will appear when users in this group are attempting to access the dashboard in question.

• How close/hide dashboard appearance "pinned" in the custom user interface

  There is a dashboard in the custom user interface that is not a small "x" in the upper right tab that would be closed/hidden. Is anyway, in the interface user or cmdline that let me close/hide this dashboard? Screenshot attached. 5.8.2 running

  
  

  Never mind. A dashboard that would not close was marked as "default" dashboard. If you want to close a dashboard that is marked as 'failure', a different dashboard by default and it then you can close the dashboard that you couldn't close before.

• creating the table in the custom user interface

  Hello

  I am trying to create a table of revenue as part of my custom in VBAI user interface. I have attached a code example of the with few variables. I wonder if there is a way to do the same thing without VBAI throw an exception that it cannot have dependencies. Please throw your entries.

  Thank you.

  I have attached a few changes 2 Untitled. VI (updated the connector pane) and custom UI VI and a simple inspection (be sure to check the status of cleanup to see how ref VI is closed). I hope this helps.

• Dash for the CPU and memory in the custom user interface

  I need a custom dashboard,

  where I will get all the vm in widget and when I select a vm on the widget side it should show % CPU, % memory usage or a latency of disk all in one metric graph.

  Can someone help me?

  Of course, you need to do is to create a resource interaction file, and then assign this file to a Sparkline widget or graphic metric. Interactions will be "selected resources" widget list VM for the reception of graphic style widget. See the information here:

  Re: interaction between widget and widget graphic metric detail application

• No data when using custom as a widget in the custom user interface relationship.

  Hello

  VCOps 5.7.2 is the version we accounts. We use "personal relationship" as a widget to monitor specific resources. But all resource objects are in a State of unkonwn after configuration and selecting the type of resource. It's a little strange because the same resource objects are OK in relationship VC widget. Is there something wrong in the configuration? Thank you!

  The result is displayed as below.

  

  Xin

  You see "?" State of resources because you have not configured entirely this widget. You have added ResourceKinds as a third party, but you still have to select the parameters that will be used for the 'Workload' category or metric. The needs of each level to be selected, and then select "change metric Mapping ', then select a metric for the"Workload"category and assign limits yellow, orange, red. Remember, it is a custom widget so that you can put "ANY" metric to display for the ResourceKind you are editing.

• Error 503 in a custom user interface

  Hello

  I have VAPP OPs 5.0.1. After watching emailFilter.xml and quiting this file. I can not connect to the custom user interface with any problem with vsphere UI. WHY?

  error:

  The web server is not available. You will be re-directed when the service is available.

  Are you sure that you do not corrupt the file? A defective xml file can take down the custom user interface. If you have no change tried to replace it with the backup file created before editing it?

  Have you tried to restart the server via the admin INTERFACE?

• custom user interface

  I read custom UI get startted it was hard but good

  You have to be an expert in the custom user interface suggestions (video tuterial or...).

  Hello

  The custome UI that's exactly... CUSTOM :-)

  You must first understand what information you need. For example, if you need to view the LUNS read latency: Lun who have high latency in my environment : http://www.virtualclouds.co.za/?p=163

  It is not difficult to learn... He must know what data you want to view and their little creativity.

• UIMsg_BreakOnRunTimeError of completely custom user interface management

  I develop a completely custom user interface for TestStand 2012 SP1 operator (without ActiveX / ApplicationMgr etc.;) "I know, I know...).  I'm trying UIMsg_BreakOnRunTimeError to deal appropriately and need advice.

  (1) my first question is what I call DisplayRunTimeErrorDialogEx() with the appropriate SequenceContext, but the dialog box disables many of the options. Under manage common error, recovery, ignore and abandon immediately (without cleaning) are grayed out (disabled) as well as the box jump of. With the same sequence SequenceEditor and the po sample UI display correctly this dialog box.  Any ideas on what is the cause?

  

  (2) Secondly, the best way to manage the selections to the user?  dontShowAgainForExecution, dontShowAgainForBatchand suspendExecution seem quite simple documentation.  i.e.

  If (dontShowAgainForExecution)
  
      execution. RTEOptionForThisExecution = RTEOptions.RTEOption_Continue;
  
  If (dontShowAgainForBatch)
  
      thread. SetBatchRTEOption (RTEOptions.RTEOption_Continue);
  If (suspendExecution is false)
  
      execution. RESUME(); Fix? Execution seems already paused. What to do if this value is true?

  Now what about the runTimeErrorAction?  I guess for RTEOption_Abort the word execution of . Abort().  What are the appropriate steps to RTEOption_Continue, RTEOption_Ignore, RTEOption_Retry, & RTEOption_ShowDialog?

  (3) Finally, once the dialog box is closed, my execution ends with the result success rather than error state.  What happens here?

  Your help is appreciated as always,

  -Terrence Jones

  (1) this is probably the user privileges, you may either not connected with user at all or the user has privileges to debug. If you do not use the users, you can disable the privilege check in the options of the station.

  (2) something like this:

  void ApplyRTESetting (TS:equenceContextPtr sequenceContext, TS::RTEOptions rteOption, bool breakExecution)
  {
  Thread TS::ThreadPtr = sequenceContext-> thread;
  Execution TS::ExecutionPtr = sequenceContext-> run;

  Switch (rteOption)
  {
  case TS::RTEOption_ShowDialog:
  case TS::RTEOption_Continue:
  case TS::RTEOption_Abort:
  wire-> ClearTemporaryBreakpoint();
  break;
  by default:
  break;
  }
      
  do action according to the selected option
  Switch (rteOption)
  {
  case TS::RTEOption_Retry:
  sequenceContext-> NextStepIndex is sequenceContext-> StepIndex;.
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Continue:
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Ignore:
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Abort:
  execution-> Abort();
  break;
  }
  }

  Also for the two other parameters we generally use the rteoption of the dialog rather than continue to hardcode, but you can do this job, how you want if you prefer different behavior:

  Example:

  If (dontShowAgainForExecution)
  context-> run-> RTEOptionForThisExecution = rteOption;
          
  If (dontShowAgainForBatch)
  context-> thread-> SetBatchRTEOption (rteOption);

  (3) maybe you call ClearCurrentRTE() to ignore alternatives.

  Hope this helps,

  -Doug

• After update of firefox mobile, I found that the modified user interface, is there a way to push back on mobile?

  I decided to update my firefox for android fotvthe flash support, but when I did I found the interface changed, now I want to go back, but unlike in I can't find older program versions for the desktop version.
  also, I should mention the problem of text entry that showd this version where the cursor is at the beginning of the first line to the place where im typing.

  Hello

  It is not an option for the old user interface on the new version, but you can get older versions here:
  https://FTP.Mozilla.org/pub/mozilla.org/Mobile/releases/
  But, we don't recommend that you use the old version because they are insecure, so take that into account if you decide to restore.

  For the text of entry question, can you tell me the brand and model of your device and if you use a special keyboard on any?

  Thank you!
  Michelle

• I have the new apple TV, and he had the new user interface.  Friday he returned to the old version of apple TV user interface.  Anyone know why this could have happened

  This is a silly question, but I'm not too tech savvy.  I don't know I have changed something somewhere.  I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research.  This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return?  I did a reset to the original values Apple TV and it did not work.  The tvOS is 9.1 (13U85).

  Try to understand the issue.

  Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3?  You can attach a screenshot?

  I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...

• How to run the Manager user interface programmatically

  I am looking for a method to run programmatically (from Labview), the Manager user interface, and then to connect it.

  Is there an API from .net to who?

  Thank you

  Note: I developed for earlier versions of VeriStand, a high-level application that manages projects of test benches and their versions. I want to update with the new manager of the user VeriStand interface.

  It is not a .NET API to control UI Manager, but there are some command line utilities, you can use to launch the user interface Manager, open a specific project, specify the IP address of the gateway to use and connect automatically.

  Try the following command line arguments:

  /nivsprj 'c:\project.nivsprj' Gateway localhost / connect

  They are documented in the online profile of Stimulus help editor.

• Using ActiveX controls to the old user interface

  I tried to build a User Interface for TestStand 4.1.1 using LabView 8.6.1 (on Windows XP)

  However, ActiveX controls keep showing in the old non - 3d "block" style.

  

  This seems to be a problem when you build a new exe. If you use the included UI (Full Featured) in TestStand it appears correctly.

  

  I was able to replacte this problem on two other development systems (a new windows XP, LabVIEW 8.6.1 & TestStand 4.1.1 install).

  (1) take a copy of the full-functional UI of LabVIEW.

  (2) open the project file

  (3) rebuild the exe file

  It's only a problem when you use the exe file. When you run from the LabVIEW development system it looks good.

  Hi Simon,.

  For your UI to take on XP
  Theme controls, you will need to place a manifest file that specifies the activex control topics in the same
  directory as your executable file. TestStand comes with a manifest file for
  INTERFACE c# you can also use for the UI of LabVIEW. Just go to the \User Interfaces\Simple\CSharp and copy the file TestExec.exe.manifest in the directory of the LabVIEW User Interface executables.

  Note that the manifest file must have the same name as your executable file LabVIEW UI. For example, if you name your user interface, "MyCustomTSUI.exe", you will need to name the manifest file 'MyCustomTSUI.exe.manifest '.

  Please let me know if this solves your problem or if you have other questions. Thank you!

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/