EZVPN - PIX to PIX

Similar Questions

• EZVPN on PIX v8.0

  If you have a headsite with several clients EZVPN (PIX 501 & 515) connected in a star configuration can you have a remote site connect you to another remote site by using the intra-interface command and change the encryption on the server EZVPN domain?

  You are right.

  If your server EzVPN is an ASA the command same-security-traffic permit intra-interface, this should allow your customers to EzVPN communicate and the only thing you need to do to accomplish this configuration is to add the traffic in the tunnel of split.

• EZVPN on version 8.0 of the PIX

  The vpnclient command does not work on my PIX 515 running v8.0... any ideas?

  Hello

  This command applies to 5505. the Guide to order OS.

  vpnclient enable

  Operating instructions

  This command applies only to the ASA 5505.

  If you enter the vpnclient enable command, the functions of ASA 5505 like customer VPN simple material (also called "Easy VPN Remote").

  HTH

  MS

• PIX 501, 1 static IP, IP address dynamic 2. Mesh full possible?

  I have 3 sites. All sites have PIX 501. Central site has a static IP, 2 remote sites a dynamic IP.

  I have no problem with the connection to the central site by using their dynamic IP address in a remote star connection.

  Is it possible for 2 remote sites communicate? There is data that must be transferred between remote sites. I read somewhere in cisco site web which its possible via mesh on request.

  Does anyone have an example of configuration on a VPN Site to Site where the Central site has static IP and remote sites with a dynamic IP? Remote locations teaches a dynamic IP from remote sites to the central server.

  Thank you.

  With IOS as your hub and then the Yes rays, the rays can learn dynamically address other departments using the PNDH. This type of configuration is called Dynamic Multipoint VPN (DMVPN), you can read everything you need to know about this here:

  http://www.Cisco.com/warp/public/105/DMVPN.html

  Even with EzVPN (not DMVPN) the rays will not learn the address of other rays, all communication is always via the hub. Call another talks would work, but as I said, the packages will talk-star.

• Several connections of client XAuth of PIX 506th

  Hi, we have Cisco PIX 506th, fully updated:

  Cisco PIX Firewall Version 6.3 (5)

  Cisco PIX Device Manager Version 3.0 (4)

  We have two customers with Cisco (routers with VPN and PIX firewall IOS). I can't make two IPSec connections for them using XAuth (they allowed Xauth). I see that we have only one VPN connection with extended authentication (XAuth) called "Easy VPN. When I am trying to set up a new one it replaces just my old connection. If I shouldn't use this firewall PIX Easy VPN Client, how can I use extended authentication (XAuth) I found no option for this? Is this supported? At 25 connections how to only IPSec connections without XAuth authentication data sheet?

  as far as I know, you may need an additional device. as mentioned, the reason being a single unit can act as a client for two ezvpn ezvpn different servers.

  Otherwise, you must return to the type of vpn. that is, to set up lan - lan.

• VPN high availability: double 3 k in the hub and the PIX as rays

  Hi Experts.

  In my scenario, I need routing between the rays and, above all, high availability (HA).

  On the shelves, I have Pix 501/506E, OS ver 6.3. In the hub, I have a couple of redundant VPN3k.

  What mechanism is the best:

  1 - hub and spoke topology with remote EzVPN in rays - to HA, I can take advantage of the "load balancing" feature of the VPN3k?

  2 - hub and spoke topology with remote EzVPN in rays - to HA, I can take advantage of the "backup server" feature of the VPN3k?

  3 any-to-any topology (an IPSEC tunnel between any pair of sites) - for HA, I can take advantage of the 'LAN-to-LAN backup' feature of the VPN3k?

  Thank you

  Michele

  I'd go with NLB on the backup server. With load balancing your connections will be spread over the two hubs. If a hub dies, then at least it will only affect half of your connections, rather than each of them in case of death of your primary and backup servers using.

  If a hub dies, your PIX connections will be de-energized for a short period, but they will be able to reconnect back automatically without making you no change.

• VPN via Pix 515

  Hello forum, I have a question please answer if someone knows the answer...

  Here is my scenario:

  Central location Pix515 (192.168.0.0/24)

  Location 1: (192.168.1.0/24)

  Situation 2: (192.168.2.0/24)

  Location 3: (192.168.3.0/24) local pool for vpn clients

  192.168.0.0/24, 192.168.1.0/24 lan - LAN IPSEC

  192.168.0.0/24 for 192.168.2.0/24 lan - lan IPSEC

  192.168.0.0/24 to 192.168.3.0/24 ezvpn IPSEC

  Question:

  Is it posible to connect Location1 and Location2 via Pix, or Location1 and Location3?

  On encryption ACLs on each location of traffic destined to another location is included for the encryption process.

  for example, location1 acl:

  Access 100 per 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0

  Access 100 per 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  Access 100 per 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0

  other locations have a similar LCD-s

  There is no problem to access locations 192.168.0.0/24, but traffic between sites does not work.

  I think that pix encrypt packets outside ariving.

  I know, it's possible on IOS with IPSEC over GRE tunnels with some routing, but PIX?

  Republic of Korea

  Hi Rok-

  Allows traffic between VPN sites does not currently work with Pix OS 6.3.4 and earlier. Code pix 7.0, which will be published later this year, will enable traffic between the same interfaces of VPN security level. This will allow talked to talk communication. I have configured the week last with Pix 7.0 beta code, so I know this is a new feature and it will work.

  IOS does not have this limitation with IPSec. The GRE is not required to IOS to make communication speaks to talk work, although it can be used.

  I hope this helps you understand what is happening.

  Please let us know this that followed by questions that you have.

  Thank you!

  Peter

  PS., pls remember to note the positions so others will know if we have provided you with the information you need!

• Save the password on the Client VPN with PIX

  I'm running a PIX 515 6.1 (2) configured for a small number of VPN clients. I want VPN clients to automatically remember the password of login for users do not have to enter it each time (we have an application which periodically autoconnexions).

  While it is a configurable option with concentrators 3000 series, it seems not be configurable with the PIX.

  The only work around, I can find is to make the connection file (.pcf) read-only and set SaveUserPassword = 1. The problem

  which is the password, and then must be stored in clear text in the file and it becomes inconvenient for the user to change their password.

  Does anyone know if the command exists on the PIX from the VPN client to save the connection password?

  Thank you

  Misha

  The command to do this is not currently available on the PIX. He has just been included in the IOS EZVPN server functionality, but have not heard of anything anyone yet as to if it will be included in the PIX.

  If you want this feature, do not hesitate to contact your account manager and have them grow for him, the more customers requesting a new feature faster he gets.

• 501 to 3000 PIX VPN concentrator

  I know that a lot of these configs have been covered here and have read a few today. Here's my dilemma.

  We have a VPN concentrator in our GOING to Florida. We set up a remote site of contract in another State. The customer is what allows us to place our PIX 501 on their (private) network and out to the internet to return to our VPN concentrator. According to the staff of the company, you have to cross a their corporate firewall. We have assigned a private to our internal ethernet IP address and has assigned a private one for us to use on our external interface on the PIX. The two private investigation periods are in the 192.168.129.x/24 (our inside) and 192.168.96.x/26 (on the outside provided by customer)

  Initially, they were to provide a public IP address peer with against our public IP hub. Now, they are unable to do so.

  They provided a possible PAT range of public IP addresses to go against, but there is no way of knowing what particular IP peer against. Is it possible to be able to point the VPN concentrator for a range of public IP addresses and hope a peers. I can ping from the PIX coming out to our public address of VPN concentrators. Any help would be appreciated.

  We configure ezvpn, however, the problem is that the vpn tunnel can only be activated from the pix not starting from the hub.

• can I buy a device to download pix on my phone to free up space when I'm traveling?

  Can I buy a device to download my pix that I travel to free up space on my iphone 6

  Any laptop would work fine, but a better option may be to look with Dropbox or similar storage service online. Perhaps if you could provide more information on your plans and your needs we can offer other suggestions. How much space you have on your phone? How long will you be away from your computer at home? Any estimate on how many pictures will you take?

• FF 27 - my fonts are pixely and I can't understand why.

  Hello friends,

  About 4 weeks ago, fonts on all the pages I visit using Firefox became pixely (some letters appear in bold, the lines seem to be low resolution, etc.). I tried the following steps to fix without success:

  -Update of FF 27
  -Reset by default
  -Turn off hardware acceleration

  Here is a link to a comparison of the FF27 vs Chrome vs IE screenshot: http://i.imgur.com/f8EBC6p.png

  The only thing I can think of that may be the culprit, it is at the same time, I got a new monitor that requires a display installed on my laptop driver.

  What other troubleshooting measures can I take to help address the display of police while I use my beloved Firefox?

  Any help is appreciated.

  Thank you.

  Try to play with this:
  =

  layers.acceleration.disabled: True
  

  And make sure that firefox has the updated driver, you can check in "subject: support.

  and try turning off hardware acceleration: try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Best approach and Apps to manage Pix taken on the iPhone and sync.

  Can someone direct me to articles or the spirit to give me a quick post re: a great way to manage my pix that I take on my iPhone 6 then organize into folders easily and have the synchronization of files to my other mobile devices and Apple computers? My iPad and iPhone are both on the same iOS but my computers are a little different: I always use Lion (10.7.5) on my Mac Pro and Yosemite (10.10.5) on my Macbook Pro. My equipment is:

  1. iPhone 6 (iOS 9.3.2)
  2. Air iPad (iOS 9.3.2)
  3. MacBook Pro (OSX Yosemite 10.10.5)
  4. Mac Pro (OSX Lion 10.7.5)

  Basically, I want to be able to create a folder of say on my iPhone and put relevant pix in it and have the folder synchronization and pix of my devices above. And if I were to edit or delete a photo on another device synchronization of changes to the other 3 devices. Key word is easily. The best analogy I just with that is IMAP for email, and whose changes are instantaneous and fluid to all other connected devices assuming that you use the same AppleID devices of course.

  Maybe it's me, but I find a bit intuitive Photo Apple application so thinking maybe someone has created a more robust application and intuitive that works on all the other computers and mobile devices Apple.

  I read reviews on App Store and Googling but thought maybe I'd get a stronger recommendation here among the Digerati Apple

  Thank you

  Steven

  the built solution just for this is iCLoud library except for the Lion system - there is no transparent and automatic solution for Lion do what you want

  iCloud Photo library FAQ - Apple Support

  LN

• Cannot find the backup store in DOCS n Toshiba drive external HARD to PIX

  Hi guys,.

  a few days back I have backup my loads of PIX and Documents TOSHIBA external HARD drive (3.5-inch USB 2.0 Black + Silver HARD drive, 2.5-inch USB 2.0 HDD Black + Silver) in-store "My PIX" and "My Documents" backup of your laptop. Now I'm trying to restore it on another laptop but I can't find them through TOSHIBA REGEN backup software. But first I couldn't find my music store of movies but the itch to get through 'repair catalogue' in the software... Has anyone asked similar problem as I do? Any help of suggestion will be highly appreciated.

  Thanks in advance!
  Nukesh

  Hello

  To be honest I m no owner of these HARD drives.
  But I wonder why you use the backup store to retrieve files

  Why you n t access HARD drive and just copy and past the files to another location

• (Pixie palm) Try to update webOS 1.3.5.1 (unpacking...)

  Miss me the CLOCK of my new Pixie of Palm app. Reading that I need to move to the 1.3.5.1 webOS.  I clicked on the 'Upgrade' and says it is downloading... sitting there forever.  I finally gave up and turned the phone off and on again.  Now when I go to 'Upgrade' it says "Unpacking" and never does anything more than that.

  I'm doing something wrong?  I am in desperate need of the CLOCK (wake up) app.  Thought it was a mistake on this phone because I had it on my razor phone stupid before changing for this one.

  OK, exceeded the update problem (guess you must have a full battery to get download and install it.)

  But still no CLOCK app he shows in my list of applications software, but not as an icon on my Launcher.

  Also, not that I'm 1.3.5.1, when I go to the app catalog, I get the large yellow triangle that says: "this action was not successful. Try again later. »... I have internet connectivity, so not sure what is the problem.

• cmd key does not not for pix not adjacent selection

  Cmd key doesn't work is not for the nonadjacent selection of pix. Worked in iPhoto, but not since the 1.0.1 Photos.

  It works in other ways as being one by design or just a default keyboard?