Several connections of client XAuth of PIX 506th

Similar Questions

• Several sessions the client VPN Cisco PIX (v.7.2)

  When we are connect to the PIX from our local supplier (all sessions have an address using a NAT) all sessions are connected, but first of all runs successfully, others are connected only but for example without routing.

  Thanks for the help in advance.

  J.

  It looks like NAT traversal issue

  You can try to order

  Crypto isakmp nat-traversal 20

  on pix

  M.

  Hope that helps the rate if it isn't

• Jabber Client several connections problem

  Hi all

  We have this weird problem where the user is automatically signed out on a regular basis and re-login, it gets an error "you have been out of the Cisco Jabber because several connections are not allowed."

  How can I determine if the user has signed places more than 1.

  try looking in the file under the roaming folder. file name should be cachetftpconfigstore or jabber - config.xml file

• Help with Cisco PIX 506th

  I need help setting up a Cisco PIX 506th Version 6.3 (5)

  I use the PDM to configure the device, because I don't know enough of CLI. I want to just the simplest of configurations.

  Here is what is happening, I set up then I hang the Interface 1 to my laptop and use DHCP to get an ip address, but I can't get out to the internet like that. Thanks PDM tools, I can ping outside the IPS very well.

  6.3 (5) PIX version
  interface ethernet0 car
  Auto interface ethernet1
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate the encrypted password of DkreNA9TaOYv27T8
  c4EBnG8v5uKhu.PA encrypted passwd
  hostname EWMS-PIX-630
  domain ciscopix.com
  fixup protocol dns-length maximum 512
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  object-group service udp test
  port-object eq isakmp
  inside_access_in ip access list allow a whole
  access-list inside_access_in allow a tcp
  access-list inside_access_in allow icmp a whole
  Allow Access-list inside_access_in esp a whole
  inside_access_in tcp allowed access list all eq www everything
  inside_outbound_nat0_acl list of permitted access interface ip inside 10.10.10.96 255.255.255.240
  inside_outbound_nat0_acl ip access list allow any 10.10.10.192 255.255.255.224
  pager lines 24
  timestamp of the record
  recording of debug trap
  host of logging inside the 10.10.10.13
  Outside 1500 MTU
  Within 1500 MTU
  IP outdoor 75.146.94.109 255.255.255.248
  IP address inside 10.10.10.250 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  location of PDM 10.10.10.1 255.255.255.255 inside
  location of PDM 10.10.10.13 255.255.255.255 inside
  location of PDM 10.10.10.253 255.255.255.255 inside
  location of PDM 75.146.94.105 255.255.255.255 inside
  location of PDM 75.146.94.106 255.255.255.255 inside
  location of PDM 10.10.10.96 255.255.255.240 outside
  location of PDM 10.10.10.192 255.255.255.224 outside
  PDM logging 100 information
  history of PDM activate
  ARP timeout 14400
  NAT (inside) 0-list of access inside_outbound_nat0_acl
  NAT (inside) 0 0.0.0.0 0.0.0.0 0 0
  inside_access_in access to the interface inside group
  Route outside 0.0.0.0 0.0.0.0 75.146.94.110 1
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + 3 max-failed-attempts
  AAA-server GANYMEDE + deadtime 10
  RADIUS Protocol RADIUS AAA server
  AAA-server RADIUS 3 max-failed-attempts
  AAA-RADIUS deadtime 10 Server
  AAA-RADIUS (inside) host 10.10.10.1 server timeout 10
  AAA-server local LOCAL Protocol
  Enable http server
  http 10.10.10.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Permitted connection ipsec sysopt
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  ISAKMP allows outside
  ISAKMP peer ip 206.196.18.227 No.-xauth No.-config-mode
  ISAKMP nat-traversal 20
  ISAKMP policy 20 authentication rsa - sig
  encryption of ISAKMP policy 20
  ISAKMP policy 20 md5 hash
  20 1 ISAKMP policy group
  ISAKMP duration strategy of life 20 86400
  part of pre authentication ISAKMP policy 40
  encryption of ISAKMP policy 40
  ISAKMP policy 40 md5 hash
  40 2 ISAKMP policy group
  ISAKMP duration strategy of life 40 86400
  ISAKMP policy 60 authentication rsa - sig
  encryption of ISAKMP policy 60
  ISAKMP policy 60 md5 hash
  60 2 ISAKMP policy group
  ISAKMP strategy life 60 86400
  Telnet 10.10.10.0 255.255.255.0 inside
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd address 10.10.10.2 - 10.10.10.5 inside
  dhcpd dns 68.87.72.130
  dhcpd lease 3600
  dhcpd ping_timeout 750
  dhcpd allow inside
  btork encrypted Ww3clvi.ynWeGweE privilege 15 password username
  vpnclient Server 10.10.10.1
  vpnclient-mode client mode
  vpnclient GroupA vpngroup password *.
  vpnclient username btork password *.
  Terminal width 80
  Cryptochecksum:5ef06e69c17b6128e1778e988d1b9f5d
  : end
  [OK]

  any HEP would be appreciated.

  Brian

  Brian

  NAT is your problem, IE.

  NAT (inside) 0-list of access inside_outbound_nat0_acl
  NAT (inside) 0 0.0.0.0 0.0.0.0 0 0

  presumanly first NAT is fot your good VPN that acl looks a little funny, what exactly are you doing with that?

  The second NAT is the real problem but for outgoing internet access - the NAT statement, you said not NAT one of your addresses 10.10.10.x which is a problem as 10.x.x.x address is not routable on the Internet.

  You must change this setting IE. -

  (1) remove the second NAT statement IE. "no nat (inside) 0 0.0.0.0 0.0.0.0.

  (2) add a new statement of NAT - ' nat (inside) 1 0.0.0.0 0.0.0.0.

  (3) add a corresponding statement global - global (outside) 1 interface.

  This will be PAT all your 10.10.10.x to external IP addresses.

  Apologies, but these are some CLI commands that I don't use PDM.

  Jon

• Number of VPN clients behind a PIX 501, restriction?

  Is there a restriction in the number of VPN clients can be behind a PIX 501. Is is just limited by the number of hosts (10, 50, Unlimited)?

  Hello

  Behind a PIX VPN clients. Will you use NAT - T (must). It will be limited only to the number of users (normal users) through the PIX. So if you have a license to use 10 or 50 then the VPN connection is counted in this list.

  Connection VPN Client through PIX is not IKE tunnel. They are normal UDP500 and UDP4500 peers.

  Vikas

• Information on the routing of traffic of the client VPN to PIX.

  Hey all,.

  I could follow the VPN Wizard included in the PDM and able to connect with the VPN Clients for the PIX. But I'm looking for more information about how the routing is done.

  For example, my remote is 67.71.252.xxx and my inside is 192.168.1.xxx. But if I connect via VPN to PIX Client, all data is transferred through my VPN to PIX and then trying to get out to the Internet.

  I'll settle for data goes 192.168.1.xxx for transit through the VPN. This configuration made via the PIX or is it the responsibility of the Client machine to set up rules of the road?

  All links to the guides to installation, or technical notes would be great.

  Thank you inadvance.

  Paul

  Hello

  I think the key word you are looking for is "split tunneling". This can be validated on the PIX using the vpngroup split access_list tunnel GroupName command.

  "Split tunneling allows a remote VPN client or encrypted simultaneous Easy VPN remote access device to the corporate network and Internet access. Using the vpngroup split-tunnel command, specify the access list name with which to associate the split tunneling of traffic. "

  In this example configuration: http://www.cisco.com/warp/public/110/pix3000.html, note that the same access list is used to "nat 0" and split-mining:

  access-list 101 permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0

  (Inside) NAT 0-list of access 101

  vpngroup vpn3000 split tunnel 101

  Order reference:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727ae.html#wp1099471

  Please let us know if this helped

  Kind regards

  Mustafa

• Establish a persistent connection between client and server

  My application must keep in touch with my servers, the HTTPConnection gives the ablitity to make one request per connection. Then the HttpConnection might not make persistent connections in the BB. I think I can use Socket connections. I am wonding if some body can confirm that and give some sugustions how persistent connections between clients and servers.

  Thank you RexDoug and Marchywka. Your suggestions are appreciated.

• Failed to connect to client host vsphere and Vcenter also esxi.

  Hi all

  I am trying to connect to the ESXi 5 of vsphere client host. I get the error message:

  vSphere client cannot connect to < ip > an unknown connection error has occurred. (The request has failed because the remote server has taken too long to respond. (L'opération a expirer)).

  and of VCENTR I am trying to add this host. I get the error. Of"request timed out".

  I can connect to the shell of ESXi and restart the vpxa services and spend. I can ping to esi IP host. but just cannot connect to it.

  earlier, he the host showed as disconnected in Vcenter. I tried to plug it failed. so I took it off I think can re add back. It did not work.

  I can just connect to client as esx host.

  kindly advice.

  Thank you

  Hello

  I am able to connect now.

  I noticed as I said previously, unable to connect to the localhost error when running esxcli. Unable to connect using the vsphere client. Unable to connect using VCenter.

  So I started to dig that's wrong with the OS esxi. and began running a few commands information esxcfg etc file system use of space, inode inconsistency, a few other commands such vdh, df to check the file system.  . and but has not changed anything. network configuration is correct.

  in these I run services.sh reboot, restart vpxa, pass reboot, restart host, check the logs, vmkernel, vpxa newspapers spend., check the date and time of the host.  I couldnot Firewall check since esxcli did not work. I haven't checked listed above step on the SSO.

  If you type esx and double tab, you will see many orders. I started testing on these orders.  so esxcli was a single command I tried later. It worked all of a sudden.

  Once esxcli has started working, I checked vsphere client to connect to esx host that it worked. then I was able to connect in Vcenter also.

  Thank you for your support

  -Caroline

  UNITED ARAB EMIRATES

• Unable to connect the client via vsphere ESX host

  Dear team,

  Once I tried to connect to client host via vsphere ESX I m getting following error.

  

  VCenter version: 4.1.0 345043

  vSphere client: 4.1.0 345043

  ESX Version: 4.1.0 721871

  You help me on the same request.

  concerning

  Mr. VMware

  It is usually advisable, but not an obligation, to have the build of your version of vCenter client correspondence.

  You can see the Interopabilty matrix for supported configurations

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

• FMS auto trigger/check connection for clients

  Hello:

  This is my second request since the last time I had a huge help shape SE_0208, thanks man, forum thanks!

  I use FMS accept a stream RTMP of Wowza and played by Flash player, measures such as:

  1 Wowza publish rtmp streams. (very stable can be read by Flash 7 * 24 hours readers.)

  2. order to WHAT FMS accepts the rtmp stream:

  a. create the folder for the application named "Live2".
  b. to copy all the files form install dir\samples\applications\live
  c. conclusion main.asc Server codes

  var nc;

  var myStream;

  application.onAppStart = function() {}

  NC = new NetConnection();

  myStream = Stream.get ("foo");
  

  nc.onStatus = {function (info)}

  If (info.code == "NetConnection.Connect.Success") {}

  myStream.play("livestream",-1,-1,true,nc);
  

  }

  }

  NC. Connect ("rtmp://www.remotertmpserver.com:1935/live"); ")
  

  }

  3 reload the application, FMS can publish correctly.

  Problem is that FMS publishing always goes down, clients connected through LAN in Giga speed, stream rtmp Wowza output is very stable and

  can be read by Flash 7 * 24 hours readers. "Need one thing to do is click the button:" reload this application "in the fms_admin

  Console, then everything will be ok, FMS can resume for the publication.

  Guys, I have a lot of thing to do and can not affecting to the fort of the FMS server all day to watch.
  Anyway I do for FMS auto trigger/check connection for clients instead of manual by clicking on "Reload this application?"

  Thanks

  Hello

  I don't have the problem. But will give it a try.

  You have 'live' application in "live2" wowza and application in law FMS?

  1. is your server, wowza ceases publication but the live connection of live2 app is still preserved? Then at the start of the Publisher publishing the stream to wowza, live2 Subscriber will get the stream, until then live2 Subscriber will be in standby mode.

  2. the link between wowza and fms is broken? You can then initiates the connection once more once the connection is interrupted. Pls change the code to live2 as...

  application.onAppStart = function() {}

  NC = new NetConnection();

  myStream = Stream.get ("foo");

  nc.onStatus = {function (info)}

  If (info.code == "NetConnection.Connect.Success") {}

  myStream.play("livestream",-1,-1,true,nc);

  }

  Else if (info.code == "NetConnection.Connect.Closed") {}

  NC. Connect ("rtmp://www.remotertmpserver.com:1935/live"); ")

  }

  }

  NC. Connect ("rtmp://www.remotertmpserver.com:1935/live"); ")

  }

  Let me know if this this is not the case

  Kind regards

  Janaki L

• LabVIEW - Arduino TCP/IP, connecting multiple Clients

  Hello

  I'm working on a connection TCP/IP between an Arduino shield WIFI control with several sensors and a LabVIEW program. You use a router, I set up a wireless network without internet that allows me to transmit the readings from the sensor of the MCU and send commands to control LabVIEW program. Currently, the Arduino is the server with the program LabVIEW connects to it as a customer and I would like the opportunity to add other clients such as a smartphone application at the same time. I am not able to connect several clients for my server Arduino based and wonder if and how this would be possible if the server was created on my computer using LabVIEW instead.

  I searched for help on the Arduino forums (http://forum.arduino.cc/index.php?topic=268578) and comments ranged from "Arduino can support multiple clients" to "Arduino can support multiple clients but it is full of errors. While it would be easier to achieve my goals by having the server on the MCU, as much data would be sent directly to each poll, the client I plan to switch to a server on computer using LabVIEW. My question is whether it would be possible to have multiple clients access to my new server, and if so, how it would be difficult to relay data from the sensor? The old plant requires the same data string for each client connected to my server. The new configuration appears as it would take the server to treat customers differently; Send commands to the MCU customer and data of the sensor of the MCU customer to everyone. Another layer of complexity is that I would need to relay controls of other clients in the same way, as the phone app smart sends a stop test command, to the Arduino via the LabVIEW program.

  Would be very grateful of entry to the community.

  Best,

  Yusif Nurizade

  You can create a server in LabVIEW that accepts connections from several clients. There are examples of different approaches to this in examples of shipment of LabVIEW and on this forum. As for the challenge of sorting where to send the data and how to transmit orders, it is-there is nothing that would make whether easier or harder in LabVIEW that in any other environment.

• client vpn Cisco pix 501

  I wonder and wonder, is it possible for a branch (2 vpn clients) to connect to the central location (cisco 501 pix) at the same time via the vpn client with a public address on each side. If this is not the case, what will be the way to make it work without additional equipment (another pix of cisco).

  Yes you can, you should check your os 6.3 a pix and you enable nat-transapency: -.

  ISAKMP nat-traversal 20

• Allowing connections incoming www by cisco pix

  It's really driving me crazy - I scoured the internet for suggestions and actually found several people who have had the same problem and found a solution that works. Doesn't seem to work for me if! I'm trying to allow any external IP address access on a web server that reside behind the firewall.

  Since it seems to be a fairly common thing, I'll post my current setup.

  6.3 (1) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password * encrypted

  passwd * encrypted

  phoenix host name

  domain ciscopix.com

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  names of

  outside_access_in list access permit icmp any any echo response

  outside_access_in list all permitted access all unreachable icmp

  access-list outside_access_in allow icmp all once exceed

  outside_access_in list access permit tcp any any eq www

  pager lines 24

  opening of session

  timestamp of the record

  logging trap warnings

  host of logging inside the 192.168.252.86

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside 213.254.xxx.xxx 255.255.255.240

  IP address inside 192.168.252.41 255.255.255.0

  IP verify reverse path inside interface

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 192.168.252.69 255.255.255.255 inside

  location of PDM 0.0.0.0 255.255.255.255 inside

  location of PDM 0.0.0.0 255.255.255.255 outside

  location of PDM 192.168.252.71 255.255.255.255 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  public static tcp (indoor, outdoor) interface www 192.168.252.71 www netmask 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 213.254.xxx.xxx 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.252.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Telnet 192.168.252.0 255.255.255.0 inside

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.168.252.42 - 192.168.252.169 inside

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  Terminal width 80

  Cryptochecksum:XXXXXXXXX

  Any advide would be much appreciated!

  These log messages mean that we have never seen a SYN - ACK the server return the PIX so we tore the connection "semi-open" based on the time-out settings. Suggestions:

  (1) make sure the WWW daemon on your server is started and connections TCP/80 ending. You are able to access this server from inside the PIX?

  (2) make sure that the default gateway on the server is pointing to the IP address of the PIX inside.

  Scott

• Save the password on the Client VPN with PIX

  I'm running a PIX 515 6.1 (2) configured for a small number of VPN clients. I want VPN clients to automatically remember the password of login for users do not have to enter it each time (we have an application which periodically autoconnexions).

  While it is a configurable option with concentrators 3000 series, it seems not be configurable with the PIX.

  The only work around, I can find is to make the connection file (.pcf) read-only and set SaveUserPassword = 1. The problem

  which is the password, and then must be stored in clear text in the file and it becomes inconvenient for the user to change their password.

  Does anyone know if the command exists on the PIX from the VPN client to save the connection password?

  Thank you

  Misha

  The command to do this is not currently available on the PIX. He has just been included in the IOS EZVPN server functionality, but have not heard of anything anyone yet as to if it will be included in the PIX.

  If you want this feature, do not hesitate to contact your account manager and have them grow for him, the more customers requesting a new feature faster he gets.

• Cannot access the internal network of VPN with PIX 506th

  Hello

  I seem to have a problem with the configuration of my PIX. I ping the VPN client from the network in-house, but cannot cannot access all the resources of the vpn client. My running configuration is the following:

  Building configuration...

  : Saved

  :

  6.3 (5) PIX version

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the encrypted password of N/JZnmeC2l5j3YTN

  2KFQnbNIdI.2KYOU encrypted passwd

  hostname SwantonFw2

  domain name * *.com

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list outside_access_in allow icmp a whole

  allow_ping list access permit icmp any any echo response

  allow_ping list all permitted access all unreachable icmp

  access-list allow_ping allow icmp all once exceed

  the INSIDE-IN access list allow inside the interface tcp interface outside

  list access to the INSIDE-IN permit udp any any eq field

  list access to the INSIDE-IN permit tcp any any eq www

  list access to the INSIDE-IN permit tcp any any eq ftp

  list access to the INSIDE-IN permit icmp any any echo

  the INSIDE-IN permit tcp access list everything all https eq

  permit access ip 192.168.0.0 list inside_outbound_nat0_acl 255.255.255.0 192.168.240.0 255.255.255.0

  swanton_splitTunnelAcl ip access list allow a whole

  outside_cryptomap_dyn_20 ip access list allow any 192.168.240.0 255.255.255.0

  no pager

  Outside 1500 MTU

  Within 1500 MTU

  192.168.1.150 outside IP address 255.255.255.0

  IP address inside 192.168.0.35 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP pool local VPN_Pool 192.168.240.1 - 192.168.240.254

  location of PDM 0.0.0.0 255.255.255.0 outside

  location of PDM 192.168.1.26 255.255.255.255 outside

  location of PDM 192.168.240.0 255.255.255.0 outside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 1 192.168.0.0 255.255.255.0 0 0

  Access-group outside_access_in in interface outside

  group-access INTERIOR-IN in the interface inside

  Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.0.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20

  Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-DES-MD5 value

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  client authentication card crypto outside_map LOCAL

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  Swanton vpngroup address pool VPN_Pool

  vpngroup swanton 192.168.1.1 dns server

  vpngroup swanton splitting swanton_splitTunnelAcl tunnel

  vpngroup idle 1800 swanton-time

  swanton vpngroup password *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.168.0.36 - 192.168.0.254 inside

  dhcpd dns 8.8.8.8 8.8.4.4

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  dhcpd allow inside

  scott hwDnqhIenLiwIr9B of encrypted privilege 15 password username

  username password encrypted ET3skotcnISwb3MV privilege 2 norm

  username password tarmbrecht Zre8euXN6HxXaSdE encrypted privilege 2

  username, password jlillevik 9JMTvNZm3dLhQM/W encrypted privilege 2

  username privilege 15 encrypted password 49ikl05C8VE6k1jG ruralogic

  username bzeiter 1XjpdpkwnSENzfQ0 encrypted password privilege 2

  name of user mwalla encrypted password privilege 2 l5frk9obrNMGOiOD

  username heavyfab1 6.yy0ys7BifWsa9k encrypted password privilege 2

  username heavyfab3 6.yy0ys7BifWsa9k encrypted password privilege 2

  username heavyfab2 6.yy0ys7BifWsa9k encrypted password privilege 2

  username djet encrypted password privilege 2 wj13fSF4BPQzUzB8

  username, password cmorgan y/NeUfNKehh/Vzj6 encrypted privilege 2

  username password cmayfield Pe/felGx7VQ3I7ls encrypted privilege 2

  username privilege 2 encrypted password zQEQceRITRrO4wJa jeffg

  Terminal width 80

  Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8

  : end

  [OK]

  Any help will be greatly appreciated

  BJ,

  You try to access resources behind the inside interface network?

  IP address inside 192.168.0.35 255.255.255.0

  If so, please make the following changes:

  1 SWANTON_VPN_SPLIT permit access ip 192.168.0.0 list 255.255.255.0 192.168.240.0 255.255.255.0

  2-no vpngroup swanton splitting swanton_splitTunnelAcl tunnel

  Swanton vpngroup split tunnel SWANTON_VPN_SPLIT

  outside_cryptomap_dyn_20 3-no-list of ip access allowing any 192.168.240.0 255.255.255.0

  4 - isakmp nat-traversal 30

  Let me know how it goes.

  Portu.

  Please note all useful posts