F11 HP recovery does not start in the recovery partition
Hello!
I am an owner of a HP Mini 5101. It has a function to press F11 to restore the system to the State "out-of-the-box". But my problem starts here. When I press F11 I immediately get a screen that says boot Windows on top manager and and error: 0xc000000e and required device is inaccessible.
This started after I made an installation "clean" with the Windows 7 DVD that came with the computer I have tried to avoid all the "crapware" that comes with the new book.
If I boot into Windows, the HP_RECOVERY partition is visible and the image of HP recovery is about it.
Is there anyway to get the recovery of F11 back to operational status? I have a few BCD edition knowledge that help to my problem...
Thank you very much!
U
I thank very you much for getting back to me so quickly.
I must apologize because I did not explain my problem in the right way. Technically, I am able to the boot partition, but the problem occurs when the partition must start in WinRE or WinPE, I guess that for the recovery to start. The loading process is immediately blocked same front initially than anything "things related Windows" starts loading. So about five seconds after I turn on the computer and boot into the recovery partition, or by pressing F11 error that I have described will appear.
Update:
I managed to solve my problem. After setting the active recovery partition and boot from the USB installation with windows 7, I managed to fix the mbr which has been altered and the score did not know what to start. So after fixing it, I had no problem to start the recovery.
Thank you!
Tags: Notebooks
Similar Questions
-
Windows does not start after the MAC partition resize
Hi all
I am newbie in MAC OS.
I have 2 bootable partitions on my MBP: MAC 10.11.4 Capitan and WINDOWS 10.
What I have is:
1. install MAC OS in the DSS of any origin.
2. use bootcamp, divide the similar size for WINDOWS 10.
3. install the new fresh WINDOWS 10 correctly and updated. Yet to backup. None of the additional applications. WINDOWS is default OS.
4. so far, I need MAC OS or WINDOWS OS correctly. Yet to backup.
5. I need to resize smaller MAC OS, divide into partitions of DATA for data could leave the two BONES.
6. Since then, I can't start Windows. Doesn't appear that "no device bootable bra bra bra...»
7 but if I click on Option after turning on, I still see MAC OS option.
Could help me fix bootcamp, so I can have the WINDOWS startup and the DATA partition?
Thanks a lot before.
diskutil list
Cs diskutil list
sudo TPG - vv - r see the/dev/disk0
sudo fdisk/dev/disk0
The result of the Terminal:
GEORGEs-MacBook-Pro: ~ the georgeaprianto list $ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * TB 2.0 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage MAC 502.4 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database DATA 497.0 GB disk0s4
5: Microsoft WINDOWS 1000.0 GB disk0s5 data base
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS MAC + 502,0 disk1 GB
Logical volume on disk0s2
8256E61A-9B5E-436A-8A15-97A98A55E0E3
Unencrypted
GEORGEs-MacBook-Pro: ~ list of cs georgeaprianto$ diskutil
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group 7C0ED763-7739-42D4-85DB-E84BD98FA978
=========================================================
Name: MAC
Status: online
Dimensions: 502414561280 B (502,4 GB)
Free space: 18907136 B (18.9 MB)
|
+-Physical volume EEF7EECD-2732-4794-8ACC-B1FDBE3FFFAE
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 502414561280 B (502,4 GB)
|
+--> Logical volume family 821E2FC7-4169-4452-BC6D-7469364950F4
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 8256E61A-9B5E-436A-8A15-97A98A55E0E3
---------------------------------------------------
Disc: disk1
Status: online
Size (Total): 502043332608 B (502,0 GB)
Reversible: Yes (no required decryption)
Name: MAC
Volume name: MAC
Content indicator: Apple_HFS
GEORGEs-MacBook-Pro: ~ georgeaprianto$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 2000398934016; SectorSize = 512; blocks = 3907029168
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 3907029167
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 981278440 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
981688080 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
982957616 970684880 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953642496 262144
1953904640 1953124352 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
3907028992 143
3907029135 32 table dry GPT
3907029167 1 dry GPT header
GEORGEs-MacBook-Pro: ~ georgeaprianto$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 243201/255/63 [3907029168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >
2: AC 1023 254 63 - 1023 254 63 [409640-981278440] < unknown ID >
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [981688080-1269536]
4: 0 b 1023 254 63-1023 254 63 [982957616-970684880] Win95 FAT-32
GEORGEs-MacBook-Pro: ~ georgeaprianto$
-
Two iMacs does not start after the 10.11.4 update.
Two iMacs does not start after the 10.11.4 update. Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd. He then gets stuck in a loop trying to start. Tried to reset the SMC and LANDAU. Without success. Started in recovery mode and ran disk utility. Discs said OK. Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).) Installation is finished but still once does not start. Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater. Installation seems to work, but once again, the macs will not start. Same 'unexpected launchd sigkill' error. A mac is now back working properly with 10.11.3 the other will be shortly. Is there a problem with the accession? Our COMPUTER support use Munki to get updates from one day to the next. Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.
More information: two bricks iMacs were late 2013 models. A 21 "and a 27. We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.
-
ITunes does not start after the installation of Windows 10
ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).
Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support
Solution, according to this link, is:
If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Computer does not start after the screen of the bios, Compaq Presario SR1023WM
Ok. Trying to fix a friend's computer and seem to have met a strange barrier.
Problem: The computer does not start after the bios screen.
Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well. And that's it as far as the computer becomes. After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect. I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point. I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected. Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success. I tried using a different memory stick and different memory as well... Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).
The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.
http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.
I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.
I have a pretty strong understanding of computer repair, so feel free to give me something to try.
If you need more information out of me, let me know as well.
Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.
At the back of the pc is the condition of the PSU led green or flashing?
-
Win 7 does not start after the creation of new partition for fileswaping.
Hello!
As the header says, Windows 7 does not start. Made a partition to swap files between OS X and Windows 7.
I saw in a thread that it could be repaired using fdisk. I'm really new to OS X, so I did not really
know what to do. Writing the result of the controls, I found in the thread.
I know now there is a warning to the partition AFTER installing Windows.
Would really appreciate if everyone took some time telling me what to do!
diskutil list
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage MacBook Hoveddisk 382,5 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database FILDELING 16.6 GB disk0s4
5: Microsoft Windows HD 100.0 GB disk0s5 data base
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 382,2 disk1
Logical volume on disk0s2
AD4E7A3F-9F8E-4734-8B4B-B65587CDD2A1
Unlocked encrypted
Fdisk/dev/disk0
Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639]
2: AC 1023 254 63 - 1023 254 63 [409640-747116216]
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [747525856-1269536]
4: 0 b 1023 254 63-1023 254 63 [748795392-32403968] Win95 FAT-32
TPG - v - r see the/dev/disk0
See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168
See the TPG: / dev/disk0: MBR suspicious to sector 0
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 747116216 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
747525856 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
748795392 32403968 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
781199360 262144
781461504 195311616 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 table dry GPT
976773167 1 dry GPT header
Please after the release of
sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C
You see the Windows files in the volume of training using the Finder?
-
My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?
The file is missing or corrupt is one of your files in the system registry.
By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
Hirens CD burning <> http://www.hirensbootcd.org/burning/ >Once you create the CD, and then start your system of problem with this CD. In the first window, select "Mini Windows XP" and wait for the system to start. When it starts, go to the Hirens Boot CD menu and select
Register-> Registry Restore Wizard.
then follow the prompts. This wizard will return a copy of your registry database from backups that are stored with your system restore points. After the restoration, stop, remove the CD and restart.When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
"How to restore Windows XP to a previous state"
<>http://support.Microsoft.com/kb/306084 >Also, this error is almost always accompanied, if not caused, the corruption of the file system. Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)
"How do I recover from a corrupted registry that prevents Windows XP boot"
<>http://support.Microsoft.com/kb/307545 >HTH,
JW -
computer does not start after the installation of vista updates.
computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.
Hello
Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.
Hope that information was useful
-
From itunes last update itunes does not start without the permission
iTunes does not start after the upgrade. "The"itunes"folder resides on a locked disk or you do not write to this folder permissions. I am the administrator. Windows 7 Professional.
See the empty/corrupted after upgrade/crash iTunes library. This particular issue is addressed towards the end.
TT2
-
Mac does not start and the fans going crazy
Computer does not start and the fans work hard and fast. Someone has an idea what is the problem and how can I solve this problem?
OLA I will try help EU tenho um macbook pro, mas esse problema não me it happened ainda EU acho seria o seu mac origem help esse problema pode formatar better.
SE nao tem'm ligar o seu osx para formatar use cmd + r e ligar pressionar cmd + r ele deve AI PODES ligar restore o seu novo osx.
-
Satellite Pro L300-21F does not start and the screen remains blank
L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.
So my questions are:
1. He's probably right?
2. is it a common problem with an easy solution?
3. what else can do before shelling out for a new Board of Directors?
4. is there a link where I can find how to disassemble the case?Any help appreciated
Hello
> 1. He's probably right?
Yes, it looks like motherboard failure
> 2. Is this a common problem with an easy solution?
If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...
> 3. What else can do before shelling out for a new Board of Directors?
I don't think you can do anything with fried mobo
> 4. Is there a link where I can find how to disassemble the case?
Take a look at the site called irisvista.com
-
Z600: computer does not start after the installation of the 5 TB SATA drive
My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk. After removing the drive, the computer starts. I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?
Thanks for the info. I added the GPT to my search and discovered what had to be done in disk management. Here is a page with step by step instructions and photos. http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/
-
Computer does not start after the screen goes blank &; Compaq.
Hello
A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.
History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.
I tried the following:
Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.
Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)
Remove the battery of the BIOS for half a day
Move jumpers CMOS from1, 2 to 2, 3 positions
I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.
Specifications of the computer
Compaq Presario SR1629UK desktop PC
Details can be found in the following link
http://support.HP.com/us-en/document/c00579251
Your help would me much appreciated...
Hi guys,.
Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.
When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.
-
I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?
Hello
Have you changed the boot order?
You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:
http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html
See you soon.
-
computer does not start after the Windows XP logo window
Windows xp home edition
service pack 2
Dell inspiron 15011. computer does not start after the Windows XP logo window
2 works well in safe mode, even connect to the external monitor
3. I reinstalled xp many times, problem stil exist.All the answers?
Hi dhanushm,
- What happens after the Windows logo screen?
- You receive an error message?
- You have security software installed on the computer?
- Have you performed an installation clean Windows XP and even after that this problem exists?
Method 1
As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
Method 2
If fails it above step can refer to the article below and try the steps mentioned, check if it helps.
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
-
Problems with my installation of Windows XP and my computer does not start on the CD.
Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "
Thank you!
original title: HELP for the installation of Win XP.Hi Jorge,.
So the only thing I can think is that it is a sort of master/slave thing.
Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).
In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.
Tricky
Maybe you are looking for
-
Going crazy on the values of stale table f *.
Some seriouse need help now. My goal is to build a table whenever a real touch. 1. create a table based on the values programitlitly beeing past in the table 2. This should each time when a Boolean value is true. 3. the table building function should
-
How doe I get my addministator password as I have lost
How doe I get my addministator password I forget my laptop of the education of the sons
-
HP M1536dnf: HP same M1536dnf found by google
Is this normal, what you 'google' with the phrase as "HP M1635dnf IO timeout" you get a lot of HP printers accessible https://www.Google.com/search?q=M1536dnf++IO+timeout%3A&ie=UTF-8&OE=UTF-8 And would that be the result to get pages with content lik
-
HP ENVY Sleekbook 6 PC, C1X79EA #ABD, Ralink RT3290 5 GHz
Hello, I had to turn it back on 2.4 GHz on my router when I found that my new Ultrabook could not connect to the WLAN. I checked the Ralink website and their information are insufficient to answer the question if 5 GHz is supported or not. So, I need
-
Share text and photo to the same call?
Hello I can call him to share text or photo separately by defining the type MIME "text/plain" or "image/jpg". My data has some text and a photo and I want to share the text and photo to the same call (e.g., email, facebook, BBM...). How can I achieve