Face recognition software is not working properly

Similar Questions

• my adobe reader software does not work properly always receive a message (not), why?

  my adobe reader software does not work properly always receive a message (not answer), then on the right Circle loading then suddenly stop and then become white background as shown below, why?

  I can't read any pdf file and I try to update the adobe reader and acrobat software, but nothing has changed.
  

  
  

  My (certainly old and slow) system made too the first time I opened 11 player, but he "thawed" after fifteen seconds, (an eternity in computing time, I know, but it has finally opened completely) what you see to the right is the "Tools" palette during initialization. That's exactly where mine would freeze at startup. Once he finally opened fully, I clicked on the "Tools" link at the top to close the Panel, and I opened and seen a document in this way and then closed reader. Now when I open the drive, the tool palette is not initialize and it opens immediately.

  Restart and prior to open what any else, open the drive. When you open it, DO NOT try to do anything with it until it fully opens, do not click on anything that it either, do not try to switch to another app give it time to open up completely and then click the tools link to close. Then open and view a document and close it. Close the player and reopen it. the tools Panel should stay closed and reader should open completely immediately.

• Satellite U200-122: Fingerprint Software does not work properly with Firefox

  When I first installed Firefox on my U200-122, everything worked fine. Connection to different sites by fingerprint has been problem free.

  After an update of firefox, the problems started. Rather than fill my username and pw, fingerprints of popups software and asks if I want to register for the site (which I did well before).

  Established since Fingerprint FF 2.0.0.6 ist is correctly installed. If I remove this configuration FF, get out, restart the installation, and come back in FF, it everything works fine... until the next reboot. I tried to install the latest version of the software of fingerprint - did not help.

  Any ideas?

  Thank you.
  Markus

  Hello

  According to your description of the update for firefox made mistakes
  Maybe the registry keys are corrupt
  I recommend you to remove the software of fingerprint.
  Then, restart the laptop and also erase the registry with freeware called CCleaner.
  Then run all updates of Firefox.
  After firefox update to restart the laptop and reinstall the fingerprint software.

  Good luck

• How to install on windows face recognition software 8

  I downloaded the facial recognition for HP protect tools on the site of hp, but while that install shows a command prompt he needs HP protect Tools Security Manager, so I downloaded as well (HP protect Tools Security Manager v.8.0.1.1328) but while install showed an error that "this software is not taken in load on your system" while on the Web site , he says that he supports both versions (32 - bit and 64 - bit) of windows 8.

  How to install laptop on my HP pavilion G6 face recognition software.

  Hi, Germain,.

  I thank very you much for coming back to us, with the updates.

  (1) don't you try to install the HP ProtectTools Security Manager software in all compatibility modes listed there?

  (2) you receive the same error message when you try to install in compatibility mode?

  If the Windows 7 compatibility mode doesn't work, then you can also try to use the Windows Vista/XP modes and check if that helps.

  If this does not help, then the problem could be due to the incompatibility of hardware. In this case, it would be best to contact the HP support to check if there are other similar software compatible with your hardware and Windows 8. You can get in touch with them from this link:

   http://WWW8.HP.com/us/en/contact-HP/contact.html

  Hope it will be useful.

• After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

  After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

  Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

  Could possibly be interfering with the entry Wacom drivers.

  Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

  It also takes more time to start because the BONE is clean some system caches that can also help.

  Try safe mode if your Mac does not end commissioning - Apple Support

• DIAL-UP Modem is not working properly in the Satellite A200 - 1 GB

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly. I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine. I mean that he can call on a mobile phone or phone of the Earth.

  But the same phone line works fine with my desktop modem as same as another modem of HP laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=109510#109510

  Seems that started two threads on the same topic.

• Satellite L500D - integrated webcam does not work properly

  Hello world

  I have a L500D (I got it for about 2 months now) and yesterday I realized that my webcam did not work properly even if it worked just fine a couple of days.

  Here's the problem: when I turn it on (via Skype or through application of camera web toshiba), the colors are reversed: it's exactly like I had added an effect on the image as 'Posterize' or 'threshold '. Everything is bright, grainy, saturated...

  I tried in low light and high, and the night mode is not on.
  I couldn't solve the problem with the webcam settings, but regardless, I, can not do anywhere near a normal image.

  I spent a lot of time surfing the web but couldn't find a solution (or someone with a similar problem, in fact). I have windows 7 64 bit.

  Any help would be greatly appreciated. I run my laptop with a lot of care, which makes even more beat when something goes wrong... Thanks in advance!

  Jminiz

  Hi mate

  Didn t find such a problem described discussions, it seems that you are the first person who has reported this

  Have you tried to reinstall the webcam software?
  Try this.
  First remove the software of webcam and then after new reboot, install the new downloaded webcam software.

  PS; have you removed the thin sheet secure the lens of the webcam?
  Check it!

• Sat 1900 - CD/DVD drive does not work properly. How to solve this?

  Hello :-)

  I have a Toshiba Satellite 1900, bought in 2003. It has a cd/dvd drive called MAST * UJDA720.

  For the last 3-4 months he was not working properly with movie DVDs. whenever a movie starts, it does not work smoothly, but in stop-and-go. First of all, I had everything again and it works fine, but lately, he never runs well and some DVD doesn't work well at all. Excuse me it I do not explain, I don't have the words in English.

  But maybe someone understands me and can help. My DVD player is dirty? Is there something like a standard CD? Or do I have to give the laptop to a repair shop?

  Thank you in advance, I would like to have my DVD player, back to normal - especially as I don't have a TV.

  concerning
  Kimbazulu

  Hello, Kerstin

  If you can watch the DVD on the unit I don't think the drive is defective. I have the same unit and still work well. Stop and go while playing DVDs can be caused due to the high utilization of the processor.

  Please try to start the Task Manager and check all running processes. All unnecessary processes can be stopped and on this way, the CPU will go to a lower level. If the antivir software is installed on your unit checking if this software analyzes the HARD disk and stop it.

  These things together can be responsible for stop and go while playing DVD movies.

  Good bye

• Satellite C650D - Fn buttons do not work properly

  Hello

  I'm a new Member here and maybe it was submitted like that, maybe that I forgot.

  For two weeks, I have trouble with the FN KEY.
  It does not work properly. I can't go up and turn down the volume, etc.
  I have reinstalled many riders as hothey utility. It is inconvenient and it makes me angry...

  HELP PLEASE.

  You have any ideas how I can fight with this problem?

  Hello

  The FN keys are controlled by the Support of Flash memory card utility.
  Try restarting the software. You can find it in all programs-> Toshiba-> Flash Cards.

  If that doesn't work, try reinstalling this application.
  You can download the page of the European driver Toshiba Flash cards
  http://EU.computers.Toshiba-Europe.com

  Welcome & good luck

• Satellite P100-221: FN key combinations do not work properly

  Hello

  I have the satellite p100-221 with pre-installed Win XP MCE. After a week of using my computer, a problem with the function keys blue appeared. FN - f1, fn - f2 and all the other fn keys combinations do not work properly. They seem to work, I can change the brightness, switch the touchpad on and out and so on, but no icon on the Info screen appears. While pressing the combination of function keys, the icons on the screen shows the time. How can I solve this problem? Is it software or hardware related?

  Thanks for any help.

  Hello

  I put t think that this question is related to the material.
  I recommend the update of the Hotkey utility.
  On the page of the Toshiba driver I found two different versions:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Your device is Satellite P100-221, then I guess the extra number must be PSPA6E.
  Do not forget that you are using the correct drivers for this device.

• Sony Cybershot DSC-W710 did not work properly

  Hello team Sony,

  My Cyber Shot is not working properly. The battery is fully charged, but show of camera Battery.That of low use of the battery in another GM so battery working properely and also, picuter qulitiy is not good until 3 Months.I have downloaded the software.

  Please suggest me how to install the software.

  Best Regads,

  Abhishek

  Try a hard reset (remove the battery and turn on the camera for a minute (or hold down the power button for a minute))

  If it does not it, it could be that the battery is dead.

  Although it loads and it's full, it probably does not load properly, so when you put it in your device, it will eventually give you the low battery warning.

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• I get an error saying: "WSOCK32.dll does not work properly" after playing a game on a web site.

  Hey, I'm using windows XP on my IBM thinkpad T40.

  I noticed after playing a game website (don't remember the URL) that my WSOCK32.dll did not work properly.
  It is sending a bunch of errors at startup and saying things are corrupt.
  I think it's a virus, but my scanner come clean. worse yet, I can't play minecraft!
  Please help me...
  original title: WSOCK32.dll errors

  Hello

  -What happens when you try to play Minecraft in the computer now? Do you get any error messages or codes? If Yes, what is the error message or code?
  -What are the exact error messages / complete that appears at startup?
   
  Follow the steps mentioned below and check if the problem persists.
   
  Step 1: I suggest you perform the steps from the link below and check if it helps.
  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista?
  http://support.Microsoft.com/kb/811259
   
  Step 2: To be sure that there is no infection in the computer, you can try running the Microsoft Safety Scanner in it. The following link will help you get:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Hope this information helps.

• What is a plateau of DesktopAgent and what happens when it does not work properly?

  When you start Windows Service Pack 3, I get a message saying that DesktopAgent tray is not working properly.  I'm not fallen on what this problem is or causes does not properly.  What is and how to fix?

  Hi Rose @ Minnesota.

  For your information, Agent Desktop tray is a program used by Qwest to update their setup program during installation DSL (digital subscriber line) based on connections to computers.

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.