Facebook pop-up error

Similar Questions

• Windows Vista errors - receiving a lot of mistakes in newspapers but no pop up errors

  I make me a lot of errors in the logs but no pop up errors do I ignore or try to correct that I can send a screen shot or better yet, let me add you a bit of what they say.

  Failure of the procedure open to the "ESENT" service in DLL "C:\Windows\system32\esentprf.dll." The performance data for this service will be unavailable. The first four bytes (DWORD) of the data section contains the error code. error 1008
  The open procedure for service "MSDTC" in DLL "" C:\Windows\system32\msdtcuiu. "» DLL' failed. The performance data for this service will be unavailable. The first four bytes (DWORD) of the data section contains the error code. error 1008
  Failure of the open procedure for service "WmiApRpl" in DLL "C:\Windows\system32\wbem\wmiaprpl.dll." The performance data for this service will be unavailable. The first four bytes (DWORD) of the data section contains the error code. error 1008
  Failure of the open procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll." The performance data for this service will be unavailable. The first four bytes (DWORD) of the data section contains the error code. error 1008
  Windows cannot load the DLL EmdCache of extensible counter. The first four bytes (DWORD) of the data section contains the error code Windows. error 1023
  Failure of the open procedure for service "Lsa" in DLL "C:\Windows\system32\Secur32.dll. The performance data for this service will be unavailable. The first four bytes (DWORD) of the data section contains the error code. error 1008
  One of them would be a bad sign, they produce several times in newspapers, but the system of seams to work fine should I do not mess with them unless the errors or things start to appear?

  Hello

  ·         Are you facing any performance problems with your computer?

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  Run the tool auditor system files are missing or corrupted system files follow the steps in the following article below to run the System File Checker:

  http://support.Microsoft.com/kb/929833

  Method 2:

  Download and run a virus scan using the Scanner of Microsoft from the following link to make sure that the computer is free of any virus infection:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.

  Original title: Winrscmde error message

  I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.  A problem caused the application to stop working correctly windows will notify you if a solution is available.  How can I stop this, I don't know what is Winrscmde or what it does?

  Hello
   
  1. do you have this pop-up at starup?
  2 have you made any changes to the computer before the show?
  Winrscmde errors are usually due to the corruption of registry files.
  Method 1:
  
  Put the computer in a clean boot state, see if that helps.
  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135
  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  Method 2: Run the checker system (SFC) scan files and check if it helps.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833
  Method 3:
  
  I suggest you make a system full scan just to be sure.
  Here is a link that will give you information on how to perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest anti-malware
  definitions, download and run the Microsoft Safety Scanner again.
   
   
  , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• "Access denied" pop-up error while opening the form online Adobe in IE8.

  "Access denied" pop-up error while opening the form online Adobe in IE8. I use a crosslink to connect to the customer's network and then open IE with Tunnel of App. Tried to re - install Acrobat reader several times but always present problem. Even tried to change the properties of the PDF (-> Preferences - general/Internet/Security Enhanced Edition)

  Problem is resolved...

  Fact following the steps:

  Uninstalled Adobe

  Disable anti virus running to do a fresh install of adobe reader 10.0

  Delete the adobe folder under <> \AppData\Local>Adobe and <> \AppData\Roaming>Adobe

• Browser BlackBerry facebook SDK login error

  I recently spent to use the SDK Blackberry facebook pot to using the source code of projects (excerpt from the tag that the pot was built in)

  .

  Since this switch, I've known browserfield problems:

  On a device, the load chart persists until I have regularized.

  On a simulator, I see:

  "Error calling content for.

  https://www.Facebook.com/dialog/OAuth?scope=user_about_me, user_activities, user_birthday, user_educati...

  Null error message. »

  where APPLICATION_ID is my correct application ID.

  The URL above will open fine in my PC and even on the browser Blackberry browser when stuck and I debugged for some time by the source of the facebook sdk and found that the earphone returngs browserfield "error: [URL]" when he tries to load the content.

  Has anyone seen similar behavior with the source SDK Blackberry code before?

  Unfortunately time did not allow me to analyse the sample with our tools or to implement the Blackberry eclipse for the trial or the other plugin.

  I went back to using the pot and put in place 2 draw up profiles for 5.0 + (including pot) and pre5.0 (does not include jar).

  Thank you

• BlackBerry Smartphones-Facebook, Twitter, Myspace Error Message.

  Hey everybody!

  I recently got a new BB Bold 9700 brnd on a package that allows you to get on the internet, etc etc. The guy I bought the phone out of Said (AT & T Store) data plan would be perfect for Social Networking Etc. well, anyway here is some information on my phone:

  Type: AT & T

  OS: Last Version, just updated as of November 9, 2010

  Also, everything is up-to-date.

  I tried to restart and everything. The error message I get is, 'we cannot reach the server of facebook at the moment. Please try again later. (100) I also saw where others on google said they encounter the same problem. As for Twitter, it says I have to update my data plan when it's the higher package and for myspace, it says I have an invalid password when it is 100% correct.

  If someone could please help me with this problem I would be SO happy! I'm addicted to Facebook. Laughing out loud.

  Thanks in advance

  Hi and welcome to the Forums!

  See this FAQ for a generic description of the different levels of data plans to:

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  As for your specific needs, I suggest to make a good list of exactly the services you want and then talk again with a representative from ATT to know exactly which of their data plans is required to enable the services you want. If I had to guess, I would say that the rep that you spoke was misinformed and put you a map of too low for what you want.

  Good luck!

• D620 "beeps" with the software pop up errors and it drives me crazy

  I have a D620.  I use VMWare.  My session of VMWare is a software that displays pop ups - well.  The pop ups are due to errors/warnings, etc.  My problem is that these pop ups are frequent, and when they occur, my D620 will 'beep' very hard.  I can't disable the beep, no matter what I'm looking for.  I don't have this problem with my Windows primary OS, just at the moment where I am in my VMWare session.

  
  

• How can I get rid of the pop-up error box?

  Recently when you work on files for a particular Web site, a pop up box will appear which indicates "error premature end JPEG library of the JPEG file. When I click it to close, it reappears several times, then pauses for about 5 seconds, then starts again. There is only one chart in the library, a navigation bar. It's driving me crazy, because I can't do the work. Does anyone know how to alleviate the problem? Thank you very much.

  Nevermind, I figured it.

• Text of the Firefox pop up Error Messages

  Ok... I am just learning Macromedia... and of course Diggin ' features to date. I have a links page where I want the text of the hyperlink is displayed in a new window to 800 x 600. So, I put javascript: in the Properties window and then call for the window pop up.
  
  Here's the page... http://www.mvchsreunion.com/links.html
  
  It works fine with IE but in Firefox, I get the error console? What gives?
  
  TIA!

  JavaScript:; (the colon semicolon)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "tweaked_eye" wrote in message
  News:f8srov$3kd$1@forums. Macromedia.com...
  > Okay... I am just learning Macromedia... and of course Diggin ' features as well
  > until now.
  > I have a links page where I want the text of the hyperlink is displayed in a new
  > 800 x
  600 > window. So, I put javascript: in the Properties window, then call
  > for
  > the window pop up.
  >
  > Here is the page... http://www.mvchsreunion.com/links.html
  >
  > It works fine with IE but in Firefox, I get the error console?
  > What to do
  > gives?
  >
  > TIA!
  >

• Is it possible to make the pop-up errors/warnings log appear longer?

  Hi all
  
  The answer to this question may have already been posted but I couldn't find when searching.
  
  I'm currently running SQL Developer 1.5.1 and I set up the display while the newspaper is minimized. When I debug, or compile packages log error/warning messages appear. However, this does not remain on the screen long enough so that I am able to read and only 1/4 times to get to the window of the journal fast enough to click on it to keep it open. Is it far from making the newspaper pop until I have minimize or at least stay on the screen for longer periods, so that I can reach him in time? I believe that it is currently staying on the screen for less than 1 second.
  
  I don't want the newspaper to display all the time because it takes up valuable space, that I find useful when writing my code. It gets in the way more when I use the SQL statement window/script output window.
  
  Kind regards
  
  Tim

  I generally keep anchored and play with the separator: set to a minimum when coding, then after compilation I just expand the pane.
  But even when reduced, just appropriate the mouse on the tabstrip control would show the pane, so I don't see what problem you have here.

  Kind regards
  K.

• When opening firefox, a box pops up: [error JAva.script:] "TypeError: netscape.security.PrivilegeManager is not defined.

  Using windows 7 Home premium svc pack 1 64-bit. After that my last windows update the above issue appears when you first start of firefox. Can I close the error msg and it seems that everything works fine. It's boring, but my major concern is security. Any suggestions?

  Thank you

  If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• 'Facebook' pop-up window crashes Safari on iPhone

  iPhone 5 s. IOS older. IPhone woman.

  Safari opens and is blocked by a window that pretends to "you have been selected for a special offer" and completely blocks use Safari except when we click to override the window. It's from a source of 'Facebook' 123 blah blah.

  IPhone stop and restart does not get rid of it. Safari is now unusable until you get in front of this infamous window.

  Is this some sort of malware Installer? I suppose it's at least a scam.

  What is the right thing to do and how to do these things target iPhones?

  Go to settings / tap Safari / choose Remove history and Web site data

  If this doesn't help not your router can be hacked.  See check instructions on this page: http://www.thesafemac.com/how-to-manage-a-hacked-wireless-router/

• I can not long print documents from my iMac/Snow Leopard / HP Laserjet 2300dtn combo. because everytime I try, a message pops up: ERROR: A Fax number is not provided. There is no mention of "fax" in the "print and fax ' file in Prefs system.»

  I use an iMac 2011 under Snow Leopard, but it can no longer print documents via my hp laserjet 2300dtn printer. Reason: whenever I try, a message appears through the PRINT icon in the Dock, read: "ERROR: has not received a Fax number. There is no fax option in the Print & Fax window in the System Prefs so I have no idea about the origin of the error message, but suspect there is corruption in the printing preferences.  So I went username/library/Preferences/com.apple.print.PrintingPrefs plist... and a file is moved to the trash. Unfortunately, the problem is not resolved. I am far away computer and would love advice for this situation.

  Try to reset the printing system.

  Reset the printing system

• remove the pop-up error dialog boxes

  Hi, I was wondering if there is a way to remove the error dialog boxes that are displayed when the type of interface commands. For example, I call the open TCP/IP command and if the port is not available with a stop of execution error, it throws a dialog box. I want to handle the error all the time so I can report the error manually. I don't know there is a way to remove this does not happen. The General error handler is usually to show errors in the dialog box if you wish.

  Thank you...

  To quote what I said earlier: "If you just manage the error, the dialog box should disappear."  And the definition of "handle" for the automatic error handler is that you wire to anything, even an indicator error.

• I got code 80070426 when I try to update my windows vista professional. I tried to start the sistem but I couldn t. An error pops up: "error 0xc004e002, Woindows cannot start the service. What can I do about it?

  Please your help!

  Hello

  It's the usual correction:

  Windows Vista 0 × 80070426 Activation Service not started or Validation not genuine error
  http://www.tipandtrick.NET/2008/Windows-Vista-0x80070426-activation-service-not-started-or-validation-not-genuine-error/

  ---------------------------------------

  You can try to run these to see if they help.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Description of the update for Windows Vista and Windows Server 2008 system preparation tool
  http://support.Microsoft.com/kb/947821

  --------------------------------------

  If necessary to start a free incident report:

  Click-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  and follow the instructions.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.