Facebook/Twitter not built into the OS 10.0.10.263

Similar Questions

• can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

  Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

  I found this in another thread that you created [*]:

  I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

  I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

• I changed my Apple ID online, but it has not changed on my iPad. Now, I can not sign into the iTunes store. How can I change my Apple ID on my iPad?

  I changed my Apple ID online because the email was no longer valid. However, my ID Apple has not changed on my iPad. Now, I can not sign into the iTunes store on my iPad. How can I change the Apple ID on my iPad?

  Tap your id in settings > iTunes and App Store and tap "sign out" on the context menu and connect you then back with the version update of your account. Similarly, if you use the same account, log in and return to iCloud, FaceTime, and Messages: what to do when you have changed your Apple ID email address or password - Apple support

• Sun disk MemoryStick pro duo does not fit into the laptop

  My disc solar memory stick pro duo does not fit into the laptop Envy nor the memory stick duo adaptor. How can I download my photos?

  Hello

  Whay is your cell phone? Many of them does NOT support memory stick family devices. You can connect your device to your computer OR you can go out and buy a card reader (USB connector, for about $ 10 to $ 15) that supports the USB key and plug it into the USB port on your laptop.

  Kind regards.

• FND_REQUEST. SUBMIT_REQUEST returns request_id, but documents are not inserted into the table AP_INVOICES_ALL

  simultaneous program returns request_id, but the lines are not inserted into the AP_INVOICES_ALL table.

  where can I check for errors? is there any error log written by simultaneous program?

  Please do not post any duplicates- FND_REQUEST. SUBMIT_REQUEST stores the error messages in the table

• The Photoshop elements 14 icon will not go into the dock on my Mac (OS10.10.4) why?  -John

  The Photoshop elements 14 icon will not go into the office on my Mac (OS10.10.4) dock... why?  -John

  Have you looked into the launch pad? Click to start and choose Photo editing software. While the application is open with right-click (Ctrl-click) on the dock icon and choose:

  Options > keep in Dock

• Related films not built into iOS projector

  Hi so I can make a film of Director in an iOS app / projector using the tool of publication very well if the main movie is the only film of the iOS device.  But when you count high school films linked to by the main movie, any of them get integrated into the iOS projector and only the main works of film, even if all the other films are included in the list of film in the tool settings post.  With the same settings tool publication that it works very well to build a projector for PC or Mac work with all related movies into the projector PC or Mac, it seems only does not work during the construction of a projector of iOS.  Has anyone seen this problem?  Has anyone successfully built a projector iOS with more than one embedded in movie?

  I am confident 100% linking the movies are not included in the iOS projector.  It takes 20 seconds or more to do a Mac projector, and it lists all the movies as it adds to the Mac projector.  By iOS projector it literally takes a second and it lists only a film as it adds to the projector, the main movie.

  The applications I'm developing use well written code that is highly components - there are about 30 movies including one application, having to merge them manually because of a bug in the iOS in the publishing tool would be relics.

  You need to do something wrong

  Please do not PANIC everyone

  Related movies work fine on iOS...

  YOU DID: -.

  Publish the setting > files tab

  Check - cast bound Include file

  Check - exclude all xtras

  No tick - file compress

  tick - related copy and dependent files

  +

  Press 'Add dependent files' > and locate / add all of your files - one by one, to the source list.

• Record is not inserted into the transparent Table Forms 10g

  Hi all
  
  I have the built in 10g (10.1.2.0.2) form.
  
  Basically, the form has 2 blocks.
  1 block with a single element, where we enter a value and press on enter (this place you block2 and run the query).
  Block 2 (tabular) will get the records. This block2 have now 3 columns (caseid, userid, date).
  
  Now when I insert a new record, I just need to get the caseid only. And username and date must be filled in automatically.
  I can fill fields username and the DATE.
  And when I enter a value element of the block 2 caseid and then Control + S(to insert the record and Save the transaction),.
  I get the message saying FRM-40400: transactions: 1 applied and saved records.
  But when I ask again for the same thing, I do not have is the record inserted into the table.
  Why is this happening?
  
  Help please...

  Drop the trigger for INSERTION WE (do not comment code or write NULL) and move your code to INSERT before trying.

  -Clément

• HP 15-R150SA: usbs does not fit into the usb ports

  There are 2 usb ports on my laptop, but none of them made any keys usb or connectors I have made another evey machine I used, what I need to use some sort of adapter?

  Here is the Manual:

  Manual

  Pages 6 and 7 show all ports. Referring to all the photos and figures tell us what ports your devices usb might not fit into. It of "universal serial bus" and is supposed to be just that... universal.

• empty folder named "enteral" will not go into the existing folder on desk too long because "Path of Destination."

  Make an empty folder to simplify the example of this problem recently of news. Everything I do, even a single word names, will not go into any other file with this next window: "Destination path too"

  long. "

  The file names (s) would be

  be too long for the

  destination folder. You

  can shorten the file name
  and try again, or try a

  location with a

  shortest path.

  Hello

  Welcome to the Microsoft Community Forums.

  Looks like you get an error message "the file (s) would be too long for the destination folder. You can shorten the file name and try again, or try a location with a shorter path.

  This normally occurs when the file system is corrupt.

  I suggest you scan the computer for the error. Follow this step to do the same thing:

  1. click on start
  2. type: CMD, according to the results, right-click CMD-> click 'run as administrator '.
  3. at the command prompt, type: chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  In addition, you can consult the following link for more information:

  Check a drive for errors

  Hope this information helps. Get back to us with more information so that we can help you.

• BlackBerry Smartphones Facebook icon not showing on the home screen

  The facebook icon does not appear on the home screen.  I deleted the facebook app, downloaded again, removed the battery, resent service books, re-registered my Blackberry.  Nothing works.  Any help?

  1. look in EVERY folder on your device... Applications, instant messaging, downloads, etc.
  If you don't see it still, look at the Options > advanced > Applications. Do you not see it listed there?

  2 is it hidden? On your home screen, press Menu > SHOW ALL, so that ALL DISPLAY is checked.

  Now, back in ALL these folders.

• Video will not insert into the timeline

  OK, so video and audio will be both be switched on timeline when I create a new sequence by dragging the "new item" icon.

  
  

  BUT

  
  

  When I drag a clip in one existing sequence that has the same parameters as the video I am dragging, inserts audio only in the timeline .

  
  

  Using images directly to the output of the GoPro camera. 1080 p @ 60 fps.

  Checks:

  > I tried dragging directly to the timeline

  > tried clicking on the button "insert."

  > tried to use option only drag "Video".

  > V1, V2 etc are highlighted / activated.

  > no video tracks are silent.

  > I tried all audio tracks to see if it would force to insert video or audio video insert inhibition.

  > if I create a new sequence with the clip of the said and then copy I can paste it into the original sequence clip said wouldn't drag/insert on to.

  > if I select several clips and drag on a new sequence with 'New element', they will insert all with video and audio.

  I found nothing on Google which approached except 2 people who have the opposite problem, which was not inserting audio but not their solution was that they have simply not A1. A2 has highlighted.

  Hi, its probably all in the source patch tracks.

  

• Yet CS4 will not go into the creation of Blu - ray mode

  CS4 running on an HP Z800 with an operating system of Windows 7. I am setting up my first Blu - ray project. The encoding of the chronology went well. When you go in, however, trouble begins. After you have filled the new project screen (title, Blu - ray, 1280 x 720, MPEG-2, 59,94 frames per second) the project window opens. Everything in the project window is still scheduled for a SD DVD. I have change the burner for the Blu - ray burner selection and then select Blu - ray. At this point, the small circular blue indicator starts to turn... and continues to do so. I let it go as long as five minutes and nothing changes. Then I go into the Task Manager and the entire computer seizes up, making me have to stop manually. What happens and why still will not go in the design view of Blu - ray?

  Thank you.

  Spencer

  Hi Spencer,.

  There was a post on this topic earlier in the forum. I can not find this post, but in this post of Pankaj suggests a very good solution to this problem.

  It could be the case that the pxhelp is not compatible with win 7 (64-bit)

  Install the last pxhelp.
  http://KB.Roxio.com/Search.aspx?URL=/content/KB/General%20Information/000070GN¶ms=

  Let me know if it solves your problem.

  Thank you

  Ramesh.

• sometimes can not log into the server or very slow to make so.green bar downstairs is fully informed and he's there with the wheel spins as it tries to plug?

  Can't all the time. Many time running without problems. When problems seem not to be like that for a while as an e-mail message. Just did an email and wheel turn and try to send. "Cannot connect to Server" in my opinion, is what happens. Press Cancel, entered Envoy file to see if went thru (sometimes he does this when he says he did not send) not in the folder sent, has started the new email and redone and it sent fine?

  They told looks that the question of thunderbird and no provider?

  My sent file is small. Thought this might help then deleted more old that I did not move from customer records.

  If it does not work at the same time, but working again later, it is unlikely that the problem is with Thunderbird.

  You can try to disable email scanning in your antivirus software.

• Satellite C660 - 10 d - Wifi don't work if the PC is not plugged into the mains

  Hello!

  My pc is not connected to the internet if is not plugged in the light.
  Can someone tell me what's in it?

  Thanks :)

  Hello

  What model mobile exact you have?

  You can improve management of power supply for the WLan settings!
  If that doesn't work, update the Wlan driver too!