Facts on multiple levels of loading

Similar Questions

• No fact to required level error table.

  I have a single dimension
  
  Account
  
  Two fact tables
  
  Threshold and Transaction
  
  These tables are attached to the Sun of account using the account number.
  
  Now when I create an analysis using account numbers of all three paintings, it says no table of facts to the required level. If I understand any other fact from the two fact tables, it fills the null value. He works at the time when I create a scan from a single dimension and fact tables.
  
  
  Why do we get this error and how it should be modelled.
  
  Published by: 979130 on December 29, 2012 12:52 AM

  I'm not sure of your data... I give a few try options than them any one should work.

  Assuming that the two facts are able to granular: you create the logical fact table in MDB add first fact as source then, Assistant to open the properties, and another fact table.

  Assuming that the two facts are to different or even granular: you create the logical fact table in MDB add first and then add 2nd fact as the 2nd source of logical table and set the tab content for these two facts

  Using the option you go for metrics and use them in the report.

  In general: you must let the BI server do know how the data is distributed on tables so that BI server can answer that you expect.

  Hope this helps, Appreciate if you mark as correct/good

  Published by: Srini VIEREN on December 29, 2012 12:58

• [as2] Several levels of loading in a main level

  Hi .

  I´d would like to know.

  How could I make a preloader with several levels in as2?

  Can I use loadMovieNum or class MovieClipLoader?

  I want to make a main progress bar, which is loading

  at all levels, not a progress bar for each level.

  How can I do that?

  Thank you

  I changed levelNum and used swfA.length but impossible to change anywhere in the code:

  var swfA:Array = ["" swf1.swf ",...," swfN, swf ""];

  var mcl:MovieClipLoader = new MovieClipLoader();

  var OL: Object = {};

  var currentLevel:Number = 1;

  loadF();

  {lo.onLoadProgress = function(target:MovieClip,bl:Number,bt:Number):Void}

  TF. Text = 100 * (+ bl /(bt*swfA.length) swfA.length (currentLevel-1)) + '% Loaded ";

  }

  {lo.onLoadInit = function(target:MovieClip):Void}

  currentLevel ++;

  If (currentLevel<>

  loadF();

  } else {}

  launch application

  }

  }

  function loadF (): Void {}

  mcl.loadClip(swfA[currentLevel-1],currentLevel);

  }

• Why the back button isn't a drop-down list to go back multiple levels in Firefox 4? Y at - it an option to reactivate the which?

  Before that I've upgraded to Firefox 4, the back button (as it is in all other browsers under the Sun,) had a drop-down list so you could spend a layer of back up and fall back on several levels. This is particularly important when there is a site you redirecting and you cannot go back only to back single click. However, FF4 is not-at least not by default - and I do not see anywhere in the options to add. Is he hiding somewhere I didn't, or that has been deleted?

  You need to click on and hold the back button or do a right click to access the menu drop down.

• Rapidclone running on multiple levels of applications in parallel

  Hello

  I'm working on a project to add 4 new nodes of level apps to our 12.1.3 RAC EBS environment. Currently, adcfgclone.pl takes about 20 minutes to complete on each node, what drives our downtime on longer than we would like. Is it possible to run adcfgclone on each node to layer of applications at the same time, or should we do one at a time? I know that it will update the DB tables, so this may introduce a risk of blocking, but I don't know if the utility would be able to deal with it.

  Thanks in advance!

  Robin

  As this will cause the architectural change, adcfgclone should be run in series, not parallel.

  I know it causes downtime, but yes there is no choice now

  concerning

  Pravin

• [AS3] Problem of multiple levels.

  Hello, well I posted a question on here before and got good reviews.

  So, I have another problem, I am doing at several levels for my game, I did 1 level and want to do more, with the more difficult aspects.

  In any case, I get this error:

  ---------------------------------------------------------------

  TypeError: Error #2007: hitTestObject parameter must be null.
  at flash.display::DisplayObject/_hitTest()
  at flash.display::DisplayObject/hitTestObject()
  at newball3_fla::MainTimeline/moveBullet()

  ----------------------------------------------------------------

  Yes, this is the code:

  ----------------------------------------------------------------

  Stop();
  stage.addEventListener (KeyboardEvent.KEY_DOWN, right);
  stage.addEventListener (KeyboardEvent.KEY_DOWN, at left);
  stage.addEventListener (KeyboardEvent.KEY_UP, space);

  var nextShoot:Boolean = true;
  var int Points;

  
  Startbutton var = new startButton();
  addChild (startbutton);
  startButton.x = 550;
  startButton.y = 450;

  ball5. Visible = false;
  ball5.x = 600;
  ball5.y = 600;

  startbutton.addEventListener (MouseEvent.MOUSE_DOWN, onClick);

  var bulletTimer:Timer = new Timer (800: 1);
  bulletTimer.addEventListener (TimerEvent.TIMER, nextBullet);

  var checkTargets:Timer = new Timer (100);
  checkTargets.addEventListener (TimerEvent.TIMER, checkTarget);
  checkTargets.start ();

  var player: Shape = new Shape();
  player.graphics.beginFill (0x0000FF);
  player.graphics.drawCircle (5, 5, 5);
  Player.y = 350;
  addChild (player);

  function nextBullet(event:TimerEvent): void {}
  nextShoot = true;
  }

  
  function checkTarget(event:TimerEvent): void {}
  If (ball.visible == false & & ball2.visible == false & & ball3.visible == false & & ball4.visible == false) {}
  checkTargets.stop ();
  startButton.Visible = true;
  }
  
  }
  function onClick(event:MouseEvent):void {}
  gotoAndStop (5);
  checkTargets.stop ();
  }

  function right(bmove:KeyboardEvent):void {}
  If {(bmove.keyCode is Keyboard.RIGHT)
  Player.x += 20
  }
  };

  function left(bmove:KeyboardEvent):void {}
  If {(bmove.keyCode is Keyboard.LEFT)
  -Player.x = 20
  }
  };

  
  function space(bmove:KeyboardEvent):void {}
  If {(bmove.keyCode is Keyboard.SPACE)

  If (nextShoot == true) {}

  var ball: ball = new bullet();
  Bullet.x = player.x
  Bullet.y = player.y
  addChild (Bullet);
  Bullet.addEventListener (Event.ENTER_FRAME, moveBullet);
  nextShoot = false;
  bulletTimer.start ();

  }
  }
  };

  function moveBullet(e:Event):void {}
  e.Target.y-= 10;
  If (e.target.y < = - 10) {}
  e.target.removeEventListener (Event.ENTER_FRAME, moveBullet);
  removeChild (MovieClip (e.target));
  } else {}
  {if (MovieClip (e.Target) .hitTestObject (ball))}
  ball.x = 600;
  ball.y = 600;
  ball. Visible = false;
  = + 100 points
  }
  {if (MovieClip (e.Target) .hitTestObject (ball2))}
  ball2.x = 600;
  ball2.y = 600;
  ball2. Visible = false;
  = + 100 points
  }
  {if (MovieClip (e.Target) .hitTestObject (ball3))}
  ball3.x = 600;
  ball3.y = 600;
  ball3. Visible = false;
  Points = + 100;
  }
  {if (MovieClip (e.Target) .hitTestObject (ball4))}
  ball4.x = 600;
  ball4.y = 600;
  ball4. Visible = false;
  Points = + 100;
  }
  {if (MovieClip (e.Target) .hitTestObject (ball5))}
  ball5.x = 600;
  ball5.y = 600;
  ball5. Visible = false;
  Points = + 100;
  }
  
  }
  }

  -----------------------------------------

  I have essentially 1 layer, this is the first image that has the code above, then a keyframe to 5frames, I want it to be to the next level.

  I would go further in detail, but I hope that's enough, thank you.

  The error seems to indicate that one of the objects you are testing as a parameter of hitTestObject there is not (ball thru ball5).  So see if the names are correctly assigned and be sure that objects exist when this code is treated... something's coming up null.

  This is not an error, but saves some coding. When you test the Boolean properties/variables, there is no need to specify == true/false in a conditional...

  If (! ball.visible &! ball2.visible &! ball3.visible &! ball4.visible)

• APS on multiple devices of loading?

  I had my PS/LR aps on my desk at home and now I would also like to add to my laptop.  I think I have good two downloads, how do I add the second without charge

  You can download and install on as many machines have you who can support the software.  Of all the machines that you install on, only two of them can be signed to use.  Of these two machines in one of them may be using the subscription at any time.

  To install simply repeat what you initially.  Download the Desktop Manager, connect and use it to install the applications.

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• Legacy multiple level

  i've got 3 CFCS: a, b, and c.
  
  < cfproperty = name 'a' >
  < cffunction = name "Init" access = "public" returntype = "a" >
  < cfreturn this / >
  < / cffunction >
  < / cfcompnonent >
  
  < cfproperty = 'b' name extends = "a" >
  ...
  < / cfcompnonent >
  
  < cfproperty = 'c' name extends = "b" >
  ...
  < / cfcompnonent >
  
  I then try to call:
  Bobo is CreateObject ("Component", "c"). Init();
  
  But I'm getting "the value returned by the Init function is not of type has.
  
  Any ideas?
  
  I b and c override the init() method and their version called each one base super or something?
  

  i've got 3 CFCS: a, b, and c.

  
  
  
  
  

  
  ...
  

  
  ...
  

  I then try to call:
  Bobo is CreateObject ("Component", "c"). Init();

  But I'm getting "the value returned by the Init function is not of type has.

  Any ideas?

  I b and c override the init() method and their version called each one base super or something?

• Measures at different levels of concentration

  I'm working on a cube. I have 6 dimensions and aggregations are supposed to do at different levels for me to get the correct results, but I'm unable to implement this. I I have a fact Table equipped with all measures, I need, including sales, quantity, amount Total savings, Total etc edits. The challenge is that these measures require complex calculations, so I have a level of data in the fact table, but I think that this is the origin of the problem. How can I build complex measures calculated in the Olap Cube using a sql statement. What are the functions I should use to do this.
  
  The challenge is that, I've separated the totals of the details and I don't know of a way to get consistent results with 2 levels of granularity of diff
  
  Thank you

  You must come with some examples to get a better answer.

  A few general points.

  *(#1). * for calculated measures, look at the Expression of OLAP syntax which resembles the features of relational analytical ROLAP.
  http://docs.Oracle.com/CD/E11882_01/OLAP.112/e23381/TOC.htm

  Use this syntax to create your measurements calculated (in minutes).

  In the "Calculation Type", select "Syntax of Expression of OLAP", and in the Expression box, type the logic.

  .
  *(#2). * If for any reason, an Expression OLAP syntax cannot be used because of some complexity, then you can use old fashioned OLAP dml syntax.
  http://docs.Oracle.com/CD/E11882_01/OLAP.112/e17122/dml_basics.htm
  http://docs.Oracle.com/CD/E11882_01/OLAP.112/e17122/dml_functions_1.htm#BGEGGBAE

  In the "Calculation Type", select "OLAP DML Expression" and in the OLAP DML type logic.

  .
  *(#3). * You can load the relational data into different levels of OLAP cube.
  Facts on multiple levels of loading

  .
  *(#4). * You can start the aggregation of the cube to a specific level in a dimension. It is very important, because the aggregation of the cube always go leaf-level and currently there is no way in AWM to set a higher standard as the starting point for the aggregation.
  For example, let's say your time dimension a YEAR-> QTR-> MONTH-> DAY levels, and you want to leave aggregation of quarter level and not at the level of the DAY.

  You can do DBMS_CUBE. Order IMPORT_XML and provide the following syntax, so that the cube is always aggregated level quarter.

  SUM WITH 'TIME' OF MEMBERS WHERE "TIME". LEVEL_NAME = "QUARTER."

  .
  .
  Regardless of the level of complexity are your calculations, it can be done by means of (#1) ou (2).
  Best is to use "syntax of Expression of OLAP.

  I mentioned (#3) and (4) just to make you aware of other available functions.

  .

• TxtCase of loading of FDM (11.1.2.2) members at the account level group HFM

  Hi all

  
  I am trying to load TxtCase using the FDM Memo field for export to TxtCase in HFM. I followed the instructions and the previous post and took this method for loading TxtCase: https://forums.oracle.com/thread/2412887.

  The application I'm working on that requires TxtCase loading to members account at group level. For these specific accounts, I loaded a value of '0' in the amount field and text data in a text field in the cell to be charged in the Memo field. The script that maps the TxtCase in Memo field works very well, and the validation step not display any errors. However, when their export to HFM we kick out declarant; "Error: data cannot be entered for members at the group level."

  
  Is it possible that Memo fields can be loaded to group members at the account level without loading quantity data?

  Thanks a lot for your help!

  Best regards

  Aaron

  Don t you can set the DATA PROTECTION section.

  The easiest way is to find the line where the line is written to the file (you have two places where this happens, one for the only period and one for the period range)

  Verify that the amount is not zero, otherwise skip the line.

  Concerning

• Loading a level of play at a time

  Hello

  I saw in some games where instead of loading the entire game at the beginning of the game, they charge one level, with the preloader on the screen, then when that level is over, another level is loaded, with the preloader on the screen, etc. I tried to find a tutorial or some information on how to do it online but couldn't find anything. I have a game that takes a lot of time to load when loading it at the beginning of the game, so I want to load it level by level. Can someone tell me how or where I could find info. on how to do it? Thank you very much...

  Get all in a SWF is the opposite of what you're trying to do.

  If you have everything in a single SWF file, then it loads the whole thing when the game is loaded.

  If you want to load a level at a time using separate sovereign funds it will load only the main game at the beginning and other levels when asked.

• Status bar for multi-level preloaded (kglad are you there?)

  OK, ive been a construction site for about a month now and slowly piecing together-ive managed to get all my different levels far different loading and unloading of the way I want that, but now I'd like a small state bar to load on the screen as my multiple rates is loaded in the background.

  The way ive been this problem without the load bar is as follows:

  on the first frame of the main movie

  loadMovieNum ("dl_web.swf", 3);
  loadMovieNum ("dl_illustration.swf", 4);
  loadMovieNum ("dl_retouching.swf", 5);

  (the first image of each of these films has a stop on the subject function)

  And I have buttons on the main sequence that make each of these visible levels and play.

  NOW, ive just to create a movie clip ive named 'bar' which is a thin rectangle, and I would have this load movie in length clip as my multiple rates is loaded in the background. So, my question is how to accomplish this? I looked everywhere and it seems all the good tutorials preload load in movieclips while I am loading levels.

  Right now my site is working on the technical side, but there will be breaks for people with slower internet connections and I need my graphic bar pop up, so they do not think they are dealing with a broken site...

  This code must be in a framework (like 1), which plays once.  the read head doesn't have to go back to this image.

  Oops, you must:

  loadMovieNum ("test.swf", 3);
  loadMovieNum ("dl_illustration.swf", 4);
  loadMovieNum ("dl_retouching.swf", 5);

  preloadI = setInterval(preloadF,200);

  function preloadF() {}

  var bl:Number = 0;

  var bt: Number = 0;

  {if (_level3.getBytesTotal () > 0)}

  BL += _level3.getBytesLoaded ();

  BT += _level3.getBytesTotal ();

  }

  {if (_level4.getBytesTotal () > 0)}

  BL += _level4.getBytesLoaded ();

  BT += _level4.getBytesTotal ();

  }

  {if (_level5.getBytesTotal () > 0)}

  BL += _level5.getBytesLoaded ();

  BT += _level5.getBytesTotal ();

  }

  {if(BT>0)}

  bar._xscale = 100 * bl/bt;  //<- adjust="" this="" to="" suit="" your="">

  }

  If (BL > 0 & BL > = BT & _level3.getBytesLoaded () > 0 & _level4.getBytesLoaded () > 0 & _level5.getBytesL oaded() > 0) {}

  clearInterval (preloadI);

  }

  }

• Podcasts won't load again 4th generation iPod

  I just bought a new iPod shuffle (my 2nd generation is dead).  I am familiar with how to load podcasts, but I can't get it to load more than my first.  I have 7 unplayed episodes and 5 different podcasts.  I tried to sync to load automatically - it is said that they are all in sync and eject the iPod.  I have to eject and when I listen to only the first podcast is here!  I restored the iPod and tried to manually load and I get the same result.  Only the first podcast will load.  When I click on my iPod to see what is on it, it shows that all unplayed podcasts are loaded.  What is going on?

  4th gen shuffle works a little differently the 2nd gen shuffle.  2nd gen shuffle is a very simple device.  He keeps a list of audio that can be played in the order of the list or in a random order.  4th gen shuffle is more like 'big' iPods (but without display). It can contain several playlists, and it makes the distinction between types different audio media (music, podcasts, audio books...).

  Because it doesn't have a screen for navigation, it has a feature called VoiceOver.  In addition to the hearing of song information, you use VoiceOver to select a playlist to use.  The shuffle treats each podcast as a playlist, with the episodes responsible (for each podcast) as the elements (and the songs) on the playlist.  To listen to episodes of other podcasts, use VoiceOver to select another playlist podcast on the menu.  This document will describe how to enable and use VoiceOver on the gen shuffle 4

  iPod shuffle (4th generation): activation and use of VoiceOver - Apple Support

  Like the shuffle gen 4 can have multiple selections, you load ideally with a combination of songs and podcasts.  For example, you can a playlist of songs for the year and a "favorite songs" playlist, as well as your podcasts.  Use VoiceOver to select what you want to hear.

• External USB card reader is in car, but does not load the SD card

  XP Pro SP3 and all updates

  Recently my external card multiple reader will load the drive letters, but not read the SD card when it is inserted.
  The message please insert a disk into drive "X".

  Have you ever read the same map with the same drive?

  What is the size (capacity) is the SD card?

  Have you ever read all the same or greater size SD cards?

  Due to these issues: cards 2 GB SD or more are "High ability" cards SD (SDHC).  Not all card readers can read SDHC cards.

  There was also an update for Windows XP compared to reading SDHC cards, but if you have service pack 3 (you do, not you), you already have this update.

• online videos are long to load

  video problems

  Some videos of 60 minutes cricket matches are divided into 10-minute video games.  It is to accelerate the loading?  Anyway, I have no problem loading these and watch in parts of 10 minutes.  Also, watching football highlights facts are not slow to load and look on its Web site.  Video games, such as Flash PacMan, etc. is not a problem loading.  Oh, and all advertising is easy to load and watch!  BUT when it comes to watching movies full black-and-white oldie (trailers are in agreement), it may take as long as 20 minutes - longer - to load!  Please help me solve this problem.  Yes, I have no TELEVISION Channel Turner Classic Movies and cable, but TCM did not show any Charlie Chan movies years!  I would like to watch the Charlie Chan movies that are widely available on YouTube and elsewhere.

  Thank you very much.
  Joe

  Hello

  1. what application you're talking about?

  2. which web browser you are using?

  Please follow the steps mentioned in the link below.

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294