fail to call the remote RPC method

Similar Questions

• Failed: Cannot access the remote Converter Standalone Agent service. It does not exist or is not responding.

  When I try to run the converter that we receive the following error message, FAILED: cannot access the remote Converter Standalone Agent service. It does not exist or is not responding.

  RaymondT

  Given that the conversion works, you can have a software or configuration of Windows Server. Check the Windows event logs. Anything in current policies that could prevent?

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• call the default Java methods UCM services?

  Hello!

  I have a custom Java method that I call the definition of custom service UCM. This method of Java, one of the tasks is to call standard UCM UPDATE_DOCINFO service to update the metadata for that document. What is the right way to call the AAU services the default JAVA methods?

  Thanks a lot for your help!

  I use the lines below...

  DataBinder binder = new DataBinder();
  String cmd = "";
  this.m_requestImplementor.executeServiceTopLevelSimple(binder, cmd, this.m_userData);
  

  You can add the parameter to the service of "binder".

  binder.putLocal("", "");
  

  This doesn't cause pollution data.

• Flash call the flex application method

  In a flex application, I use the SWFLoader for loading a flash, the code:

  <? XML version = "1.0" encoding = "utf-8"? >
  "< mx:Application xmlns:mx ="http://www.adobe.com/2006/mxml"fontSize ="12">"
  < mx:Script >
  <! [CDATA]
  Import mx.controls.Alert;

  public function testResult (): void {}
  Alert.Show ("Hello World");
  }
  []] >
  < / mx:Script >
  < mx:SWFLoader id = 'flash' source="flash/test3.swf"/ >
  < / mx:Application >

  There is a button in the flash(flash/test3.swf) shipped,

  When I click on this button, how to call the method testResult to the flex application? Thank you!

  In your Action Script (flash/test3.swf) to make one:

  Import mx.core.Application;

  and then in your button:

  Kind regards

  SAM

• ICMP failed on inside the remote host by vpn

  A strange problem is then seen that he was working on an ipsec vpn on asa.

  ASA inside: 192.168.100.1 255.255.255.240

  host of the customer directly connected to ASA inside: 192.168.100.2

  tunnel to form properly. When the remote client 10.20.15.5 is crazy to asa, he answers.

  the same ping when tried customer 192.168.100.2 directly connected to the asa on the inside does not work.

  & This also does not bring the tunnel upward.

  of asa ping 192.168.100.1 & vice versa is very good.

  plotter configuration & race packet is attached. Ping between host traffic capture and asa inside the interface only displays not any what exit.

  Help, please.

  Thank you.

  That doesn't sound right.

  If it goes through the VPN tunnel, the traffic will be encrypted, and you shouldn't be able to see the break of your internet service provider.

  Can you please delete the xlate and connections to this host: disable 192.168.100.2 local

• Why do I get this error:? Permission denied for my {URL} call the UnnamedClass.toString method on.

  When I click on links to external sites on my site, I get the following error, like 5 times, and yet, it always opens the other site after clicking the OKs. For example, click on "Host Hotel' on the left NAV.

  Error: Permission denied to call method UnnamedClass.toString on.

  URL of affected sites

  http://www.TGIF-classic.org

  Norton Toolbar is the culprit. I work with Norton to get addressed.

• Call the Web service method

  Hello
  I use a webservice in my Flex 2 project:
  "" < mx:WebService id = "WStest" wsdl = " http://192.xxx.x.xx/Service.asmx?WSDL" showBusyCursor = "true".
  < mx:operation name = "Test_me" result = "test ()" >
  < mx:request >
  < int > 0 < / int >
  < / mx:request >
  < / mx:operation >
  < mx:operation name = "OperatorExists" fault = "faultHandler (event)" resultFormat = "xml" > "
  < mx:request >
  < name > aaa < / name >
  <>aaa password < / password >
  < / mx:request >
  < / mx:operation >
  < / mx:WebService >
  "Test_me()' method works if I write" WStest.Test_me.send (0). I would like to know how can I call 'OperatorExists' method with 2 parameters? I tried with WStest.OperatorExists.send('aa',aaa'), WStest.OperatorExists.send(aaa,aaa) and WStest.OperatorExists.send(name:"aaa",password:'aaa'), but still no results. This method should return 'true' if the user name and password are good and "false" if not.
  Pleas help me if you can.
  Thank you
  Tudor

  I use:

  http://somewhere.in.Holland:50100/WSDL/mios_GetDataForView_Request_V6_1.wsdl ".
  ID = "myWebservice".
  result = "handleResult (Event)" "
  showBusyCursor = "true".
  Fault = "handleFault (Event)" "
  >
  
  
  
  {aanvraagproces_id}
  1
  120
  
  
  
  

  and then:

  private void DoInitialization (): void {}
  aanvraagproces_id = parameters.id;
  Model.aanvraagprocess_id = parameters.id;
  myWebservice.mios_GetDataForView_Request ();
  }

• What is the best place to call the HomeScreen.setNewState method?

  Hello

  I have a requirement where I need to remove the 'Asterix' around my candidacy. So what is the best place to keep the code in HomeScreen.setNewState (false) which has been determined by an electronic mail message?

  THX

  Srinivas

  You want to delete when you know that your applicaitn has been invoked, so I consider this "reset" in the activate method (() of UiAppplication)

• ORA-06508, procedure cannot call the procedure of package

  I have a large stored procedure that calls a package (procedure) that manages a number of procedures to determine whether the process can continue or not.  (It checks authorization of the student to enroll in a class).  We have a web process calling the stored procedure, and that works fine.  What does not work, is a call to the package.  Oracle returned ORA-06508: PL? SQL: could not find program unit called.

  I have included instructions for debugging, so I know that it is the specific call to a procedure in the package fails with ORA-06508.  Thinking it's perhaps something in the package, I inserted a debug statement as the first line in the procedure called in the package.    (Debugging instructions call a procedure inserts of rows in a table of debugging with independent validation).

  When I log in the user account with sqlplus and run a test, everything works fine.  But when the web process is running under the same user, the process fails to call the procedure of package and fails with ORA-06508.

  It seems as if the web process runs with the rights of the appellant, or a role is not granted.

  Can someone help me understand what the problem is?

  offered hv, I appreciate your comments.

  We solved the problem: remove the package that couldn't be cited, then re-create.   That's all!

  Apparently, something in the database was tangled upward.   The server recently had problems with disk space, then it might have been related to that.  But we'll never know for sure.

  The stored procedure and packaging (procedures) which he called were owned by the same schema, and there is no mechanism that I can find to prevent one of the other appellant.  But that was the case - Oracle threw the ORA-06508 exception when the stored procedure called the package procedure.

  I replaced the stored procedure and package several times fine-tuning debugging code, but this has not fixed the problem.

  Finally let it drop and then re-create the package, it's which solved the problem.

  Regarding requests to view the code, there is no way that I could reproduce the problem, since the error that occurred was against the permissions and rules which packages run and the procedures of the Oracle.  Thanks for all the tips and suggestions.

• How to call the bean support just after JSFF / fragment of page loads?

  Hello

  I have a simple requirement - call the Backing Bean method for my page-fragment AFTER that its loading. The JSFF is delimited to the workflow.

  I tried the solution given here: http://fortunefusionminds.blogspot.com.au/2013/04/how-to-invoke-backing-bean-method-right.html but it does not work for me.

  Every time I tried to access any link layer (i.e. the PanelFormLayout DepartmentId) attribute/property within the refreshRegion method below gives NullPointerException.

  My DepartmentId property is exposed to the Backing Bean by using the Bindings property in the property inspector.

  @Override
  

  {} public boolean refreshRegion (RegionContext regionContext)

  int refreshFlag = regionContext.getRefreshFlag ();

  
  

  if(refreshFlag == RegionBinding.PREPARE_MODEL) {}

  System.out.println (getDepartmentId.GetValue ())

  }

  regionContext.getRegionBinding (.refresh (refreshFlag));

  Returns false;

  }

  
  

  {} public void setDepartmentId (RichInputText departmentId)

  this.departmentId = departmentId;

  }

  public RichInputText getDepartmentId() {}

  return departmentId.

  }

  Any help please?

  Thank you

  Hitesh Patel

  Hi all

  Here's how it works for me.

  1. in your backing bean create property & its get accessor for afterPageLoad as below. We don't need a setter method.

  private; channel afterPageLoad

  public String getAfterPageLoad() {}

  If (!.) {AdfFacesContext.getCurrentInstance.isPostBack ()}

  initPage();

  }

  Return afterPageLoad;

  }

  private void initPage() {}

  System.out.Print ("I'm initPage() and called exactly once");

  }

  2. create a hidden field to the bottom of your JSFF page as below.

  Thanks - Hitesh

• The key fire method does not work

  Hi all

  I have a little problem with my javafx application. I designed my application with the scene designer and added a few buttons for them. For each button, I defined a listener method (annotated with @FXML) and

  I also added each button as member variable to my controller. So far so good.

  Now my controller extends an AbstractController which has certain functions inside. Inside of my method to initialize I pass the button to a method of the abstract class to collect the buttons inside a set.

  Now, to a point that I want to get all buttons of my abstract class defined but that does not work.

  I tried to add to each button setAction method and implemented an anonymous class before you put the button in my game. Then the fire of the button method calls the anoymous class / method. But

  Why it works don't not with a @FXML annotated method?

  The problem would be the "timing"? If I switch the button the the class abstract in the init, the button may not be registred listener method? Just for my understanding, when the init method calls anyway?

  It is difficult to create a small test application for this problem, but maybe someone can help me already.

  Greetings,

  Hauke

  I misunderstood the question a bit, I think. It also works with the following changes:

  Buttons.fxml

  Controller.Java

  import javafx.event.*;
  import javafx.fxml.FXML;
  import javafx.scene.control.Button;
  
  public class Controller extends AbstractController {
    @FXML private Button button1;
    @FXML private Button button2;
    @FXML private Button button3;
  
    public void initialize() {
    this.addButtons(button1, button2, button3);
    }
  
    @FXML private void buttonPressed(ActionEvent event) {
    Button button = (Button)event.getSource();
    System.out.println(button.getText() + " fired");
    }
  }
  

  In this version, where managers of the action for the individual buttons are defined in the FXML, these action handlers will be actually installed earlier: before Controller.initialize () is called (and potentially before the controller is instantiated and the buttons are injected in the it).

• How to use the LMSGetValue javascript method?

  I try to call the javascript LMSGetValue method when loading the first slide in my class.

  However, the following does not work:

  studentName = LMSGetValue ("cmi.core.student_name");

  I have consulted with technical support from the LMS, and they said, it seems as if captivate does not define the LMSGetValue method in the js file included in the course.

  I have to do something to include the file scormdriver.js in the course, when it is published?

  Any help would be appreciated.

  SCORM_CallLMSGetValue ("CMI. Core.student_name");

  You can also call this function once you get the name if it is not in the correct order:

  ReverseNameSequence (strName)

• Is it possible to access the task flow parameter in the EOImpl.create () method?

  Hello
  
  Is it possible to access the task flow parameter in the EOImpl.create () method? In the affirmative, please let me know how to access.
  FYI... I have a CreateInsert < xxx > activity in the workflow, which, I believe, called the EOImpl.create () method internally. During the creation of the entity, I want to assign a default value based on the parameter of workflow.
  
  Thank you

  A way to pass parameters from workflow for the model is during the initialization of the workflow. To do this, you can create a prepare() method in the Module of your Application and call it from the workflow. By defining this method by default in your workflow, it will be called every time that the workflow starts. You can pass any task rate desired as the arguments of a function prepare() method. In the prepare() method, save the workflow of the values for parameters in the transient variables EO or VO. These variables will then be accessible in the create() methods.