Failed disk Seagate used CD of HP recovery and windows won't complete installation...

Similar Questions

• I used on my Toshiba Recovery CD, Windows Vista and now none of the drivers is installed. I can't connect to the internet. Help!

  Some drivers to try to install automatically, but after each reboot, they try to re - install again. I am not absent/not search for drivers, because I can't reinstall my network card.

  Hello

  Go to the Toshiba site on the computer that you use to get here > drivers and downloads Section > key in your Toshiba model number, then the operating system > find, download and SAVE the adapter, Chipset drivers, etc on the desktop > copy to a Flash drive and transfer them to the other laptop.

  http://support.Toshiba.com/drivers

  See you soon.

• Windows does not start after the use of CD "" Toshiba Recovery and Applications/drivers ".

  Well my Toshiba Satellite A205-S5814 laptop was very slow and I was getting very frustrated with it, so I decided pop in the CD "Toshiba Applications/Drvers" perhaps to restore my laptop to factory settings and run perfect once again.

  As I was doing this operation and tried fixing it, the thing finished and off the laptop. And when I turned it back on, Windows will now start and give me the Windows Boot Manager screen. My laptop had Vista on it and I even tried to install Windows XP Home Edition on it with a disk I had. But whenever he's going to do, he says he can find t any hard drive? But for sure, there is a hard drive!

  I do not understand what has happened and why this Toshiba drive ruined my laptop. Before I used this drive my laptop has always works and works OK, it has been slow but still booted Vista and stuff ran. Can someone please help me or tell me what to do, I think that Toshiba has messed up my laptop with disc here, and I don't think that we should have to pay so he can get fixed.
  Please help me.

  Hello!

  I don t think that the Toshiba Recovery disk ruined your laptop.

  If I am right on the recovery disk is Vista and it was installed before. I think the installation going something wrong.
  When you get the Windows Boot Manager you can fix your computer? You can reinstall Vista without the recovery disk when you choose this option, then Toshiba product recovery.

  When you install Windows XP, you need a SATA driver. If you don t use one, you will get this error which can t find hard drives.
  You can download it on the Toshiba site and after booting from the XP CD, you must press F6 to load drivers from a floppy external drive or use you nLite to create a disc with drivers.

  Good bye

• I used just the PC recovery and now I can't reinstall XP service pack 3 and Windows Update does not work.

  It's probably why I can't reinstall my McAfee.Any ideas?

  I have a Compaq Presario SR1750NX

  All the drivers here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=1815877  
  Install those from Windows XP for each component.
   
  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
   
  Then download and install this:
  http://ftp.HP.com/pub/softlib/software10/COL23267/PV-60484-2/sp37394.exe
   
  Restart the computer.
   
  Install the SP3 that you downloaded.
   
  Restart the computer.
   
  How would this work for you?

• Rescue and recovery and windows 8.1

  Hello

  For the last 4 years, I used Rescue and Recovery on the my ThinkPad to keep backups (really liked the functionality of incremental backup) and restore unique when files necessary.

  I have now just received a new X 1 carbon gen3 coming with default Windows 8.1 and a lot of the classic ThinkVantage tools are missing. I've heard many of these tools no longer exist or are replaced by "apps".

  But what of Rescue and Recovery? Impossible to find anywhere for Windows 8.1 and it is really a great tool.

  Any idea? I just missed the link somewhere? It's official, and it tools is not taken in charge (and will never) on Windows 8.1? No work around? (such as installation of Windows 7 and cross my fingers?)

  Thanks for your comments on that (I'm already hating Windows 8.1, fortunately Windows 10 will be better...)

  Rescue and Recovery is not supported on 8 win 8.1 you can try using windows backup.

• Facebook reports that I use v3.5 of Firefox and Windows 2000 when running on 16.0.2 and XP (upgraded system). where is this info and how to reset?

  the PC has been improved from Win2000 to XP and has all the XP service packs. It also runs Firefox 16.0.2. When I go on Facebook and other pages, it says that I'm on an unsupported operating system (said I use Windows 2000), and I should upgrade my browser to the latest version (said I'm under FF 3.5 or 3.6 FF, can't remember which). i've looked through the registry, but not not found something that jumps. where can this info could be stored that Firefox is looking.

  Try reading some sites say that Firefox is obsolete or incompatible, even if it's the latest version

• Palm 700wx with outlook synchronization: using Active Sync 4.5 and Windows Mobile 6 for Verizon

  I had a Palm 650 P and my data is synchronized using Palm Desktop.  I recently bought a WX 700 phone.

  I did a hot successful synchronization with MS Outlook 2007 and can't get the data in outlook to synchronize and transfer data to the new 70wx.

  How someone see this before? No matter what I tried, nothing has been successful! I tried other forums and without success.

  Please notify

  Kajun58

  Try disabling secure internet or firewall, anti-virus etc. I have suggested that more than a few of them today, but you may want to consider hard reset the device and try to synchronize again.

  Message relates to: None

• I use FF 2.0.0 and Windows Millennium Edition. Is a newer version of FF compatible with my system?

  1: I can't update Firefox automatically

  2. adobe shockwave errors appear frequently.

  What is the latest version of Firefox running on Windows ME and I can download it? The question of the shock wave will disappear?

  No sorry the last version to work on old Windows Me was the Firefox 2.0.0. 20 you have.

  From Firefox 3.0. * and most recent earlier that Firefox ran to Windows 2000.

  The KernalEX may be able to work on your WinME patching so that it can run some programs as if it were Win200/WinXP, although the most recent, you should be able to run will be the Firefox 3.6. * (3.6.20 is underway).

  http://sourceforge.NET/projects/kernelex/

• Scanning using a printer Kodak 3250 and Windows 7.

  This is the first time I needed to scan. I followed the instructions for the scan of a page of a document I want to make changes. Once I followed the instructions to make a new scan, I get the menu printer and it is set to photography and other things by default. No place to check the size of the page or anything like that. When I clicked on start, the printer kept analysis an infinite number of pages in a file document, all the great super size - not to the size of the original portrait. The pages were numbered from 1 to 8 years before I stopped scanning. I tried several times with the same useless results. The preview of one of the pages seemed to be the right size, but the latter has not been analyzed like that. I follow all the on-screen instructions every step of the way. Is it me or the printer that is the problem here? Thank you.

  Hello

  We apologize for the delay in response.

  I suggest you follow the steps in the link provided below and check if it helps.

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Keep us updated on the State if you need help.

• Can I use Dreamweaver on my desktop and laptop? (was: multiple installations)

  For purposes of travel, is it OK to have Dreamweaver CC installed on my desktop and a laptop computer for the trip?

  Yes.

  Under the terms of the CC license, you can have active programs installed and works on both machines.

  You can actually installing them on an infinite number of machines, but your license/activation is good for two. You just close one before connect you on a third.

• Cannot be used on Qosmio G30 recovery CD

  Hello

  I'm doing a recovery on my G30 and have recovery G30 dvd but when I insert the disc all get them is a message saying - this recovery and applications cd is not configured to work with this machine (laptop).

  This cd is for: Qosmio G30... Please use the correct CD recovery and applications.
  However my computer is a G30, go figure?
  Does anyone know what the deal is?

  Cheers, Thomas

  It seems that you are using a bad recovery CD or is not compatible.
  Have you used the recovery CD from Toshiba that came with the laptop?

• HP pavilion ab-516tx: disk recovery and other readers gets automatically complete

  my disc recovery and other readers to complete slowly as I began to work, is there any virus or it is an internal problem.

  can you help me out of this, is there a solution?

  Hi @Sahilchhabra,
  
  Please become a member of the HP's Support Forums. I understand that you have disk space issues. I'll be happy to help you.

  Please see the following documents.

  Resolution (Windows, 10, 8) low disk space errors

  Screening of hardware failures (Windows, 10, 8)

  As to your question about a virus here is a link that may help.

  Computer may be infected by a Virus or malicious software (Windows, 10, 8)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Recovery and upgrade to win 8

  I use the HP pavilion g6 2020se runnig real win 7 and plan to upgrade to Windows 8.

  I created Hp recovery discs and my hard drive also contains the recovery partition.

  Before the upgrade, I have a few q:

  1. will I have dual boot options (win 7 and win 8) after I upgrade? Y at - it a facility during the upgrade to display the partition where win 8 needs to be installed?

  2. after the upgrade to win 8, removing previous installtion of windows 7 (i.e., removal of system "windows.old" folder) will affect the recovery procedures in the future?  More clearly, will be F11 or recovery disks work after doing the deletion above?

  3. If after the upgrade I want to downgrade to win 7 (the same State just before the upgrade), how to ensure that all my win 7 postulants windows updates and stay as it is just before the upgrade.

  Help PLz...

  You are welcome.
  
  Not sure why the link doesn't work, but I'll give you the link below. It worked for me earlier. The optimal path to get Windows 7 on the system is to use the recovery discs. The link is provided to enable the option to use the windows.old folder to go back, but you do not use this option which makes the irrelevant link at this point. But it's a good backup plan.
  http://goo.GL/XFBz1
  
  The recovery discs are intended to operate independently of any software on the hard drive. In fact, this is how the replacement of hard drives is installed. A hard drive goes out, a new one is mounted (and free of any software or partitions), and the recovery discs (the user created or sent by HP) are used to reinstall all of the original software. Little matter if the hard drive is empty or not, but what is important, is that it is the same computer that the recovery discs were made for based on the serial number and other factors. Be assured that the recovery disks will work as long as the material is physically the same and serial number matches, which is coded in the recovery disks.
  
  I used my discs of recovery of Windows 7 on a hard drive wiped several times, including the case using an advanced hard drive "cleaner" to erase all data.
  
  My own experience can enlighten us on that. I installed Windows 8 (or five) about four times on my laptop due to various problems of Windows 8. I will note, the questions were the result of my laptop is too old and not designed for Windows 8. Whenever I returned to Windows 7, I used the recovery without problem discs. This should be the same experience you have.
  
  The only time that the recovery disks can fail, it is if a smaller hard disk replacing the hard drive from the factory.
  
  The answer to the question of recovery of the disc is Yes on both accounts.
  
  The Windows.old folder has nothing to do with the (user created or sent by HP) HP recovery disks. Windows.Old is the culmination of a process of upgrading Microsoft in case something goes wrong, while the old data is not lost. It's more than a safety net which allows to return to the previous Windows without wiping the hard disk entirely. Since the windows.old folder should not be used to go back to Windows 7, think of it as a Museum of old files Windows. There is at this stage as archive.
  
  I hope I answered your questions and removed any doubt about the recovery disks.

• Unable to print JPG files using Windows MS Office PhotoViewer and Windows 7?

  I can't print a photo (JPG or JPEG file) using MS Office 10 Photoviewer and Windows 7. I followed the instructions in the chapter "How to print a photo" image is able to be consulted in the wizard, but it prints a blank page. I can print the picture using the browser Zoom of Canon. I have a HP Color LaserJet CP3505dn.  All other printing works very well. PDF print perfectly as Word and Publisher files. It is only when I try to print using MS Office Photoviewer.

  I searced the Web for a solution and can not find a. Other forums say it is a bug in Windows 7, but surely it would have been fixed now.

  I have Windows 7 32 bit and MS Office 10. This problem is a huge drawback, and ask a solution of Microsoft as of emergency.

  Fary Walker

   

  Hi Fary Walker,

  I see that you are facing problem like JPG or JPEG file.

  Do not worry! I'm here to help.

  What is the type of network your printers and computer connected?

  For now, let's try the steps from the following link and check:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also contact the manufacturer of the printer to see if there is a hardware problem.

  Come back with more information so that we can help you better.

  Please let us know if you need help on Windows.

• Can I then set up my new and old iMac to use both for rendering first and consequences?

  Can I then set up my new and old iMac to use both for rendering first and consequences?  No special installation required?

  and...

  If I understand correctly, your ability under the license agreement to install the software

  on the two systems don't allow for simultaneous use on both systems!

  but...

  for EI, there is the "Adobe after effects Render Engine"

  documented here:

  https://helpx.Adobe.com/after-effects/using/automated-rendering-network-rendering.html#NET work_rendering_with_watch_folders_and_render_engines

  "In After Effects CS6 and later versions, you can now run aerender or use spyware file.

  non-redevance rolling mode, serialization not require it. » !!!

  HAHAHAHAHAHAHAHAHAHAHA!