Windows does not start after the use of CD "" Toshiba Recovery and Applications/drivers ".

Similar Questions

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hard drive does not start after the use of the recovery on USB Manager

  The hard drive on HP G62t - 350 CTO Notebook to my newphew failed. I could create a USB recovery in the Recovery Manager. I installed a new 120 GB SSD. The original hard drive was bigger, do not remember now but 250 or 500 GB. I know that the recover the system after the hard is replaced (Windows 7) said "to avoid problems, install a hard drive as big or bigger than the replaced hard disk", but that's a question for later.

  Computer started fine of USB (in fact, is set to boot from USB if present by default). Recovery Manager starts. I choose minimum installation. He goes through the process of partitioning the SSD and copying files. Said so to remove the external media and restart, the computer will restart several times during the process, blah, blah, blah. I get out of USB and restarted, but after POST I get "no bootable media present.

  If I try to reboot, leaving the USB in, it starts in USB and that we are at the beginning. I am able to confirm with a rescue disk, the SSD has an NTFS partition that had Windows files copied to it and a large amount of unallocated space. (Something like 60% / 40%).

  So:

  1. How make bootable hard drive for, and if it was bootable, recovery processes complete?
  2. What is happening with the partitions? He creates the partition recovery first, and then after the start, the recovery partition installs the operating system? If so, I might have to give up this process because since I'm moving to smaller storage, I don't want to devote half of the drive to a recovery partition.
  3. Official recovery media help? A technician told me that he would do so, but couldn't explain to my satisfaction why the USB I created with Recovery Manager does not work, so I'm suspicious of the assertion that the media created by HP as opposed to media created by me using the own HP software would be better, and since the computer is under warranty I don't want to spend $30 + to find out.

  Most of the people who have installed an SSD that was smaller than the reader of the factory were unable to use any medium recovery HP with the SSD.

  As an alternative, if you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 family, by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Please note that this facility is not all customizations of HP or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the pilots of the HP G62t - 350 CTO Notebook PC Drivers page.

  Windows 7 SP1 can be found HERE and HERE.

  Direct link to Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash drive from windows. ISO

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Windows does not start after the installation of NVIDIA GeForce FX 5500. Help!

  Before, I had a Sparkle GeForce2 MX400 64 MB AGP Graphics Card with the installed driver. I have not had any problems with him, but I need to upgrade, so I got a NVIDIA Inno3D GeForce FX5500 256 MB 128 bit AGP graphics card. So, the thing is, before I installed the driver for it, the computer was working fine, but of course I can't play games. So I downloaded the driver from NVIDIA (175,19 I think), and I installed it in safe mode to avoid any conflict with my antivirus. The installation is complete, and the system restarted. Everything was going well until after the windows logo (by the way, I'm on Windows XP Pro SP3), when the system crashed all of a sudden. The screen turns off, the unit of the system itself was still on, but it does not. I tried enabling / disabling the NumLock, CapsLock button to check if there is an answer, but I have nothing. I manually turned the computer off, waited for about 3 minutes, the market again, but again, the system crashes after the screen Logo of Windows XP. I started in SafeMode again, uninstalled the NVIDIA driver, restart the system and everything went back to normal. I retried my old 64 MB AGP card and it still works fine. I really need to install the driver to make the most of my 256 MB graphics card. Can anyone help please?
  So far I did the following:
  1. re-installed Windows XP
  2 re-installed the driver NVIDIA about 5 times already.
  3. update all the drivers of my motherboard.
  4. completely removed all traces of NVIDIA using Drive Cleaner and put it back.
  5 installed DirectX 9.0.
  Still, none of them worked. Help!

  Here are my computer specs:
  OS: Windows XP Pro SP3
  Motherboard: ECS 661FX-M rev 1. 0 b
  Processor: Pentium 4 2.4 GHz
  RAM: 768 MB
  HARD drive: 1x80GB IDE slave, 1x20GB IDE Master
  BIOS: Phoenix Tech, LTD 6.00 PG 01/18/2006 v2.2
  Antivirus: Avast free Antivirus v6

  Any help would be appreciated. Thank you! :)

  PS: I know that my computer is really old. But please don't advise me to upgrade the entire computer or something like that. I can't afford to buy right now a new. Thank you.

  Hello

  I suggest to start the computer in safe mode and check if you can start.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If you are able to start the computer in safe mode, then go to Device Manager and uninstall the drivers for the graphics card and restart the computer.

  If it boots fine in normal mode and then try to install the latest drivers in normal mode and check if that helps.

  Check if that helps.

• Windows does not start after the start menu after installing own home premium 7 on the Dell Inspiron Duo

  I did a clean install of windows 7 Home premium 64 on my dell inspiron duo 1090, returning 8.  This laptop does not have a disk drive or an Ethernet port.  I used Installer 64 bit of this Web site and the corresponding link.  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/can-i-revert-back-to-Windows-7-from-Windows-8/f8f5aaaa-8a18-4255-a6b2-5ecd6840d7ab

  It installed perfectly fine at first.  I was unaware of the proper order of pilot facilities and went first on the network drivers.  Designed for cordless operation and then use the updates automatic/driver finder.   After going on the dell site and download the drivers of network to a flashdrive from another computer, I then unpacked and used the setup.exe.  Now, when you try to restart the computer it perpetually loop screen Dell, the only options in F2 for Setup or F12 for boot options (the only option being the hard drive boot because there is no disk drive physical and nothing mounted on a virtual disk drive).

  Any help is appreciated and ask all the details that I left out.

  Thank you-

  I intend to use this laptop for school and Windows 7 is required for course work.

  Perform the following steps:

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the DVD of Windows 7 disc or a USB flash drive that you created, and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During the grace period, you can install your device drivers,
  run Windows updates and solve other problems or issues.
  Once you are satisfied everything is working properly, and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available.

  Make a small group (10 updates to max at a time) of the updates at a time,
  reboot if prompted and install another small group of updates and so on.
  registration of .NET Framework updates for the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-> 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

  Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

  DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

  and then

  DISM / online/cleanup-image /startcomponentcleanup

  So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

  I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

  Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

  When people ask me "What's up?", I always say 'the CAP '.

  So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

  Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

• Windows does not start after you use vaio recovery

  I tried to reset my computer to factory settings and programs. I used the for Vaio recovery tool do. During the course of my computer restarted as it should. But as Windows was returning back I get an error of "Windows Boot Manager" say a file called ntoskrnl.exe was missing or corrupt with status 0xc00000e9 upstairs he provided a way to fix: cannot start Windows. A recent hardware or software change might be the cause for the problem:

  1. Insert your windows installation DVD and restart.

  2. choose the language settings, click Next

  3. click on repair your computer

  After step 3, the repair tool said that it could not solve my problem.

  I tried to redo the recovery twice for nothing doesn't.

  I tried to use the memory diagnostics.

  I tried to change the default BIOS settings.

  I tried to use the chkdsk command in the console installation disc

  I don't have a backup disk.

  You could try System Restore option under the recovery tool if startup repair option has not resolved the problem. After the execution of the Image recovery system on your VAIO computer and you still have the same issue, then you may need the recovery disc. If you have any errors after the diagnostic equipment, then the recovery partition was damaged already.  You can buy the recovery disc for your computer of Sony parts and accessories or parts distributor authorized Sony.

  If my post answered your question, please click "accept as a Solution.

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• Windows does not start after the most recent update

  I have 64 bit Vista and Office 2007. There was a group of updates for the latter in February 2011. Something in here is stop Windows at the login screen. Workes mouse and keys stick, but it won't take me to the password screen. Only way to get around it was to go in safe mode and do a system restore to remove the updates. Any suggestions?

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8 reset the advanced settings of the IE by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  9. open Internet Explorer (32-bit) only to http://support.microsoft.com/kb/971058 [ignore APPLIES to section] & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows does not start after the installation of Service Pack 3 for Windows XP

  Hey guys I have a question I received this automatic update (Windows Service Pack 3) I am running Windows XP Media Center Version 2002, the problem I have is after installation of the update my computer guard stop and windows not not start, I had to go back to my computer to a safe point (usually before the update) and I say usually because I already tried to install this two update times with the same result.

  I hope you can help me I really need your help, I'm totally distraught and I received the update to install it but I'm afraid to install fearing that my computer will not start.

  Thank you.

  Hi Crickets1,

  1 did you receive an error during the shutdown process?

  I suggest that you refer the below Microsoft article and try the steps mentioned to do before you install Windows XP SP3.

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not start after the system recovery

  I have a Pavilion dv9700 w/Windows Vista 32 bit Home Premium.

  After running the system since the disk partition recovery hard (supposed to be successfully), it restarts to:

  "Unable to start windows.  Recent change hardware or software may be the cause.

  "Insert the windows disc" - the computer did not come with one.

  «Computer or system manufacturer contact administrator»  -HP now wants to charge me for the real-time chat agree that came with my system was "free of charge as long as you own the PC."

  "File windows\system32\winload.exe".

  'status 0xc000000f '.

  'could not be loaded.  The file may be missing or damaged. »

  Help, please!

  Finally found someone who had a Vista disk, so I did a clean install, which fixed the problem.  Then, I downloaded and installed all the HP drivers/software.  It's a shame that computer manufacturers do not issue a disk with the operating system when they sell computers more.  If they gave me one, I could have it fixed in one day.

• Lightroom (CC) on 8.1 64-bit windows does not start after the installation successfully without any messages

  I've updated with my creative cloud abbo cc 2014 Photoshop and Lightroom. The update has installed the new Lightroom in parallel with my lightroom existing 5.71 (64-bit). It still works. I've also updated Photoshop CC 2014 without any problem.

  Lightroom has installed a single link in the programs folder and not link on the desktop. This link is staged to "C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe.

  I am using 8.1 in 64-bit Windows. I uninstalled the new lightroom already and installed again. same result.

  Does anyone have a tip what to do?

  You must completely disconnect Adobe Creative Cloud and reconnect. To disconnect using the procedure in the: connect, disconnect | Creative desktop application Cloud.  Click lightroom in creative cloud and lightroom will launch.

• Windows does not start after the MAC partition resize

  Hi all

  I am newbie in MAC OS.

  I have 2 bootable partitions on my MBP: MAC 10.11.4 Capitan and WINDOWS 10.

  What I have is:

  1. install MAC OS in the DSS of any origin.

  2. use bootcamp, divide the similar size for WINDOWS 10.

  3. install the new fresh WINDOWS 10 correctly and updated. Yet to backup. None of the additional applications. WINDOWS is default OS.

  4. so far, I need MAC OS or WINDOWS OS correctly. Yet to backup.

  5. I need to resize smaller MAC OS, divide into partitions of DATA for data could leave the two BONES.

  6. Since then, I can't start Windows. Doesn't appear that "no device bootable bra bra bra...»

  7 but if I click on Option after turning on, I still see MAC OS option.

  Could help me fix bootcamp, so I can have the WINDOWS startup and the DATA partition?

  Thanks a lot before.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The result of the Terminal:

  GEORGEs-MacBook-Pro: ~ the georgeaprianto list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage MAC 502.4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database DATA 497.0 GB disk0s4

  5: Microsoft WINDOWS 1000.0 GB disk0s5 data base

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS MAC + 502,0 disk1 GB

  Logical volume on disk0s2

  8256E61A-9B5E-436A-8A15-97A98A55E0E3

  Unencrypted

  GEORGEs-MacBook-Pro: ~ list of cs georgeaprianto$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 7C0ED763-7739-42D4-85DB-E84BD98FA978

  =========================================================

  Name: MAC

  Status: online

  Dimensions: 502414561280 B (502,4 GB)

  Free space: 18907136 B (18.9 MB)

  |

  +-Physical volume EEF7EECD-2732-4794-8ACC-B1FDBE3FFFAE

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 502414561280 B (502,4 GB)

  |

  +--> Logical volume family 821E2FC7-4169-4452-BC6D-7469364950F4

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 8256E61A-9B5E-436A-8A15-97A98A55E0E3

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 502043332608 B (502,0 GB)

  Reversible: Yes (no required decryption)

  Name: MAC

  Volume name: MAC

  Content indicator: Apple_HFS

  GEORGEs-MacBook-Pro: ~ georgeaprianto$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 2000398934016; SectorSize = 512; blocks = 3907029168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 3907029167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 981278440 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  981688080 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  982957616 970684880 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1953642496 262144

  1953904640 1953124352 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  3907028992 143

  3907029135 32 table dry GPT

  3907029167 1 dry GPT header

  GEORGEs-MacBook-Pro: ~ georgeaprianto$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 243201/255/63 [3907029168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AC 1023 254 63 - 1023 254 63 [409640-981278440] < unknown ID >

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [981688080-1269536]

  4: 0 b 1023 254 63-1023 254 63 [982957616-970684880] Win95 FAT-32

  GEORGEs-MacBook-Pro: ~ georgeaprianto$

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027