Failed importing clothes fuse "read error".

Similar Questions

• Satellite L305D-S593 - disk read error

  My Toshiba Satellite L305D-S593 suddenly stopped. At first I thought he had a little more heated or something, but when I tried to turn back on it gave me a message saying disk-read error press ctrl alt del to restart. I did several times in the same direction. While I tried to reinstall windows, I got lucky if she showed to the installation screen once it did, I followed the instructions for installation clean (I had to do it once before, but for different reasons).

  Once he brought me to the menu had to select a partition to install on I said to do it on the main HDD after some loading and that time, he said that it was impossible to complete the formatting required. So I Redid the process and I noticed the music said it had 288 GB of available memory, but before that, I had only about 40. To remedy this, I clicked on the format button and it says that it cannot complete the action because the disk is about to fail.

  PS My processor is 64-bit AMD Turion dual core mobile, with 4 GB of RAM

  Hey,.

  In my opinion, it has something to do with the HARD drive itself, I guess that it s a bad sector so Windows Setup can format t HARD drive properly. I mean before you tried to reinstall Windows, the system could not start due to a disc read error. This means that the files on the HARD disk are confused because of bad sectors

  You can install Windows Toshiba Recovery disk?

  If it doesn t work too, I'll try to replace the HARD drive. Usually, it is not complicated and can be done in 5 minutes.
  In addition, you can check the HARD disk for errors with diagnostic tools special as Drive Fitness Test. Google a bit for such tools, they are freeware, so it s no problem to find. ;)

• 0xc00000e9 then a disk read error occurred. Press CTRL ALT DEL to restart

  desktop computer is Compaq windows update.  on restart received status 0xc00000e9 32\ntkrnlpa.exe leader: \windows\ system information: windows failed to load because the kernel is missing or corrupted.  Installed recovery disk, now have "a disk read error has occurred. Press CTRL ALT DEL to restart".stuck cycle.    suggestions?

  shonkg,

  HD can be at fault... do a chkdsk and make sure that your player or files are not damaged.

  http://www.w7forums.com/use-chkdsk-check-disk-t448.html

• disk-read error press ctrl alt del

  I start to load Windows XP Pro and I get an error MSG before it comes to the first Windows XP logo, it reads the disk read error press ctrl, alt, del start I have checked all my connections and cables. I can add another hard drive and use bad like a slave and it starts up fine, and I went to the slave and looked everything I could think of, go back, it just above starts with the same error.

  Hello

  I suggest you get into the Recovery Console and use the where command prompt to run the chkdsk command. This scan the hard drive for bad sectors and recover any information from reading. To get instructions on how to enter the recovery console in Windows XP:
  How to install and use the Recovery Console in Windows XP 
  The KB above also shows how to use the Recovery Console prompt.
  a. Insert the Windows XP startup disk in the floppy drive, or insert the Windows XP CD into the CD drive and restart the computer.
  b. Click to select all the options required to start the computer from the reader, if you are prompted.
  c. when the "Welcome" screen appears, press R to start the Recovery Console.
  d. If you have a computer dual-boot or multiboot, select the installation that you must Access from the Recovery Console.
  e. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER.
  f. type in the following command and press ENTER:
  Chkdsk /r
  g. once the command is executed type "exit" (without the quotes) to exit the command prompt and check if the problem is resolved.
   
  See also:
  http://support.Microsoft.com/kb/315265
  Note:
  
  Warning of Chkdsk.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Boot disk hard read error and other critical and dangerous errors. .

  After logging in, a "File Recovery" window opens and lists a number of errors. The desktop is black, and the saved files are missing.

  Here are some of the messages: -.
  Hard drive boot sector read error; Criticism
  System blocks are found; Criticism
  Error 0 x 00000024 - NTFS_FILE_SYSTEM; Dangerous
  0x0000002E - DATA_BUS_ERROR error; dangerous
  etc, etc.
  It also gives the message that it is strongly recommended to fix the errors found all and provides a button to click for repair
  When I click on the button repair it prompts me to buy a license for the full version of the File Recovery software.
  Should I buy a license, or is it a virus or a scam?

  Hello

  It's a scam.

  File recovery is a family of scareware programs Rogue.FakeHDD computer infection. This family of computer infections pretended to be a hard drive diagnostic and repair programs which scans your hard drives for errors and then allows you to correct. In reality, however, this program is a computer virus which displays false information, hijacks your computer and hide your files and Windows Start menu to make you believe that your hard drive has failed. This family of computer infections spread through Trojans that display fake computer error messages. When you click on one of these messages it will then launch file recovery program in the hope that you will buy it

  Follow these steps for removal.

  http://www.bleepingcomputer.com/virus-removal/remove-file-recovery

  See you soon.

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• When I tried to run my Application with "Launch Android BlackBerry" on Bb 10.2 Simulator error: ERROR: code net.rim.ajde = 4 connecting 192.168.48.130 to BAD failed! NULL children = [status ERROR: code = 0 net.rim.ajde]

  ERROR: code net.rim.ajde = 4 connecting 192.168.48.130 to BAD failed! NULL children = [Status ERROR: net.rim.ajde]

   

   

  code 0 = Please check if the Android player was totally started when you got this error. Otherwise, you can either

   

  increase the time-out of the launch of reader Android on BlackBerry-> BlackBerry Android Development Tools

   

  page preferably or wait until the Android player is completely started and try again. NULL.]

   

   

  Please guide me how to solve this question where can I find

   

  BlackBerry-BlackBerry Android Development Tools >

  Please guide me with the Exact path

  Thank you

  OK, I have one installed and installed a new freshly.

  Solved my problem. Please answer my query to the other

  on the loading BAR file on BlackBerry Q5 Please.

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/how-to-load-a-signed-bar-on-the-R...

• Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

  When I run pdf reader applications, I get this error:

  Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

  Hello

  1. you remember to make changes to the computer before this problem?

  2 are you able to open files from other Adobe programs?

  Follow these methods.

  Method 1: The problem is that by default, when the PDF program is used as a COM object, then it cannot be activated by the following accounts:

  (a) a Director

  (b) system

  (c) interactive

  How to solve this problem is to change the DCOM settings for the Application'S object.

  Configure DCOM

  a. click Start, type run in the start search field.

  b. type DCOMCNFG , and then press OK. (This will load the "Component Services")

  c. navigate to Component Services, click computers, my computer, DCOM Config application PDF.

  d. right-click and select Properties.

  e. Select the Security tab.

  f. in "Launch and activate permissions" select personalise and press change.

  g. press the Add button to select the "Network Service" account

  f. click on the OK button, and then test your application, it should work fine now.

  Method 2: If this does not help, you can uninstall and reinstall Adobe reader software and check.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can download the latest version of Adobe reader from the following link.
  http://get.Adobe.com/reader/

• "Replace with after Composition Effects, the importer reported a generic error"

  Hello! I'm having a problem putting a file first pro in sequels, whenever I right click on the file in the first, he opens AE without file and then first freezes for like 5 min until I get an error message that reads

  "Replace with after Composition Effects, the importer reported a generic error"

  I see this question was asked several times, but I can't find a solution that works for me.

  I guess you probably need more information, I'm not sure, please do not hesitate to ask!

  Thank you!

  Your Ae is probably more recent than your PR. run the update.

• Import since the first error

  Hello, everyone!

  Just bought the new suite CC today and trying to find a bug. I wanted to take advantage of the rendering of AE farming capacity, so I wanted to try to change the sequence of creation in AE and go from there. I have two questions: never really used before AE and the following error: "CEAP Premiere Pro Import Plugin: the project file read error.» (5027: 12) "is anyone know what this is?

  AE, I see all the imported media first, but I do not see the edited timeline. Doesn't seem to be a matter of corruption, just a few question kind of import.

  Thank you!

  AE is crap to deal with MP3 or Lagarith. Convert your files.

  Mylenium

• P2V conversion failed to 95% a general error has occurred: Reconfiguration failed

  Try to convert the laptop HP dv2000 WinXP home.

  Here are some of the errors in the logs. Any help would be appreciated. My search resulted in little things.

  Was a warning in the journal highlights: failed to refresh the drive letters for the layout of the target volume.

  ===========

  error impossible to extract the media type for
  ? \VOLUME{380506fc-2ddd-11db-b221-806d6172696f}\: incorrect function (1)

  User agent is "VMware-client/4.0.0".

  ===========

  Number of partition: Invalid magic sector.

  Disk number 1 were ignored due to errors when reading partition table

  Number of partition: Invalid magic sector.

  Disk number 1 were ignored due to errors during playback of dynamic disks header or LDM database is corrupt

  Number of partition: Invalid magic sector.

  Number of partition: Invalid magic sector.

  Number of partition: Invalid magic sector.

  Number of partition: Invalid magic sector.

  ===========

  Directory creation error using CreateDirectoryEx: cannot create a file when that file exists already (183)

  ===========

  Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
  . \vstor2-mntapi10-374D384D007E00000000000001000000
  WINDOWS\system32\config\SYSTEM under the name of the mntApi286208973830050397 key.

  Unable to load the registry hive
  . \vstor2-mntapi10-374D384D007E00000000000001000000
  WINDOWS\system32\config\SYSTEM, error 0 x 3.

  Could not open the registry hive, MNTAPI_ERROR = 50

  Cannot open the system registry hive. Preserving jump drive letter mapping

  ===========

  Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  Boot\BCD under the name of the mntApi300615223830050397 key.

  Unable to load the registry hive
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  Boot\BCD error 0 x 3.

  Boot.ini file read error
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  Boot.ini

  ===========

  program boot

  timeout = 30

  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Edition family "/ noexecute = optin/fastdetect

  ReconfigurationTransaction: volume of comments system caching

  Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
  .\vstor2-mntapi10-374D384D007E00000000000003000000\WINDOWS\system32\config\SOFTWARE under the name of the mntApi301193348830050397 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-374D384D007E00000000000003000000\WINDOWS\system32\config\SOFTWARE, error 0 x 3.

  50 error when you open the software hive

  Cannot read the news of the OS on the system disk: 50

  LocalPathToGuestSystemFolder:
  .\vstor2-mntapi10-374D384D007E00000000000003000000\

  LocalUndoFolder:
  .\vstor2-mntapi10-374D384D007E00000000000003000000\$reconfig$

  Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  system32\config\SYSTEM under the name of the mntApi301224598830050397 key.

  Unable to load the registry hive
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  system32\config\SYSTEM, error 0 x 3.

  Cannot access registry SYSTEM comments, error 50

  Journal of the undo entry...

  The C:\WINDOWS\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory cleaning...

  TaskImpl failed with MethodFault::Exception: vmodl.fault.SystemError

  RecordOp add: event [9], task-1

  ConvertTask updates, States: 4, percentage: 95, xfer rate (bps): 1615946

  GetEvent (taskID = task-1) task converter

  RecordOp REMAP: info, task-1

  Task failed:

  SetError (taskID = task-1) task converter

  Completing the task-1 task with State = 3

  ===========

  Error 1 setting SFN

  ===========

  Try the Converter 3.0.3 - which seems to be a bit more reliable

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Read error - SOLUTION system configuration data

  Today, I found a solution to the error of notorious boot not only on the toshiba, but some other brands also.

  The error is: System configuration data read error.
  He invites to start with 2 beeps which prevents the computer laptop Moldavian from.

  I tried everything I could to remve this message but noything helped me.
  Replace all, cmos battery, updated the bios, loader, drives, keyboard and etc.

  Today, I found a solution very simple that I want to share with you guys.
  This solution worked for me and I hope it will work for you too.

  Are you ready? :)

  Go to the Bios and change the Bios language french.

  Post here if it works for you also.

  Thanks for sharing your experience with us. But its really hard to believe that your solution would be linked to all devices such problem

  However, good to know that this small change in the BIOS has helped you to resolve the issue

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• check failed. There was an error connecting to server Apple ID.

  check failed. There was an error connecting to server Apple ID.

  What do you do when you receive this alert?

• Equium A300D - 13 X - Configration system data read error

  Hello

  I have a problem with my Equium A300D - 13 X laptop, everytime I turn on my laptop it starts and loads the initial startup screen as usual, Toshiba once asked that loud "BEEP" comes from my laptop, and lists the following information:

  Phoenix TrustredCore (tm) NB
  Copyright 1985-2006 Phoenix Technologies Ltd.
  All rights reserved

  Herring of the ITA (DDR2 + T/RS690M/SB600)
  CPU speed = 2000 MHz

  639K system spent RAM
  1918M extended RAM passed
  1024 KB of L2 Cache
  Occult system BIOS
  Video BIOS with a shadow
  ATAPI CD-ROM: MAST * ADVD-RAM UJ-850 S
  Fixed disk 0: WDC W2500BEVT-00SCSTO
  Fixed disk 1: Hitachi HTS542520K9SA00
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  I replaced the hard drive and flashed the BIOS settings as advised by Toshiba Helpline but the problem persists.

  Help, please! because the "BEEP" is now getting on my nerves!

  See you soon

  Hi andrew_net82,

  It seems that the BIOS has detected an error with a certain part of material...

  Before doing something I recommend you load the default settings in the BIOS. If you are in the BIOS Setup, press the F9 key.

  If it doesn t work you need for professional assistance from an authorized service I think. Guys need to check which part of the material is defective and must be replaced.
  List of the ASP, you can find on the official website of Toshiba.