Read error - SOLUTION system configuration data

Similar Questions

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Equium A300D - 13 X - Configration system data read error

  Hello

  I have a problem with my Equium A300D - 13 X laptop, everytime I turn on my laptop it starts and loads the initial startup screen as usual, Toshiba once asked that loud "BEEP" comes from my laptop, and lists the following information:

  Phoenix TrustredCore (tm) NB
  Copyright 1985-2006 Phoenix Technologies Ltd.
  All rights reserved

  Herring of the ITA (DDR2 + T/RS690M/SB600)
  CPU speed = 2000 MHz

  639K system spent RAM
  1918M extended RAM passed
  1024 KB of L2 Cache
  Occult system BIOS
  Video BIOS with a shadow
  ATAPI CD-ROM: MAST * ADVD-RAM UJ-850 S
  Fixed disk 0: WDC W2500BEVT-00SCSTO
  Fixed disk 1: Hitachi HTS542520K9SA00
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  I replaced the hard drive and flashed the BIOS settings as advised by Toshiba Helpline but the problem persists.

  Help, please! because the "BEEP" is now getting on my nerves!

  See you soon

  Hi andrew_net82,

  It seems that the BIOS has detected an error with a certain part of material...

  Before doing something I recommend you load the default settings in the BIOS. If you are in the BIOS Setup, press the F9 key.

  If it doesn t work you need for professional assistance from an authorized service I think. Guys need to check which part of the material is defective and must be replaced.
  List of the ASP, you can find on the official website of Toshiba.

• Satellite A200-AH6: Error Message: System CMOS checksum bad after BIOS update

  I've updated my laptop Satellite A200 - AH6 PSAE0C (Bios and graphic update) after the installation of Toshiba Power Saver.
  I downloaded the update of the BIOS on the Site of Toshiba and flashed my BIOS.

  After reboot and all start/stop that I do now, I get a black screen (splash screen) with these details listed thus:

  Updated System Configuration data
  ERROR
  0271: check date and time
  WARNING
  0251: System CMOS checksum bad - default configuration used

  Can someone help me please?
  If anything, I would just restore my old BIOS, if possible.

  Please, someone help!

  Hello

  Have you tried to access the BIOS and tried to set it to default settings?
  Isn't it? Do this!

  By pressing the F2 key, you would be able to access the BIOS. Set the BIOS back to default settings and set up.
  Then start the laptop again and check if the same notification will appear on the screen.

  Welcome them

• Satellite P200 Vista Ultimate - boot configuration data read error

  I have a Toshiba Satellite P200 running Vista Ultimate.

  Recently I started having a problem after restarting after the installation of vista updates. In fact, it will not start at all and gives me the following message on a black screen.

  Windows could not start. A recent change in hardware or software can cause of bethe. To solve the problem:

  1. Insert your windows installation disc, and then restart your computer
  2. choose your language settings, and then click Next.
  3. click on "repair your computer".

  If you do not have this disc contact your manufacturer aministrator or the computer of the help system.

  File: \Boot\BCD

  Status: 0xc00014c

  Info: An error occurred trying to read the boot configuration data.

  The only way I can fix it to insert the recovery dvd and click on repair. This levonorgestrol only when the computer restarts after an update. If I manually turn off the computer, then on start up fine.

  I don't want to put automatic offf to update more because I think they are important from the safety point of view, however, this situation is not acceptable.

  Can someone please help.
  I have a screenshot of the error, but have reproduced the information above.

  Hello

  In my opinion, there is something wrong with your mater boot (MBR) of the drive and therefore the bootloader causes an error.

  Usually, you might be able to fix it using the original disk of Vista but it s really strange that this problem still occurs after the update to vista.

  In my eyes, you should really check if the same problem would happen using the Toshiba factory settings and configuration.

  Good luck

• Equium P300-16 t - system error writing Configuration data

  Salvation message for the first time

  I have a Toshiba Equium P300-16 t and it has developed an error starting on the screen, it says

  System error writing Configuration data
  F1 - F2 CV - Bios settings

  When it appears that I can't get the option of recovery for work the bios settings seem to be completely in-accessible.

  This error appears just under the version number of the bios and the specifications of the RAM, just after the toshiba screen. The laptop is also a beep which I think is its length bios error code just two beeps very loud and even with a very short break inbetween

  On the page that appears after F1 (curriculum vitae) is pressed it shows just an another two options that are
  F2 - Setup F12 Multiboot Menu selection

  None of these options no matter what and the system is just idle on this screen.

  Obviously, without the bios menu there is not much I can do

  Really research help solve this problem as im not very clued up on the configurations of the system

  Oh and incase it allows... BIOS version - PhoenixBIOS 4.0 release 6.1

  Thanks in advance
  Kris

  Hi mate

  It would be interesting to know if the HARD drive is listed in the BIOS.
  Could you if you please check this?
  In the BIOS, you should see the HARD drive and HARD drive details
  If it is not visible, then that would mean that the HARD drive is faulty and therefore the operating system cannot be started.

  In this case, the HARD disk needs to be changed.

• Satellite A210 - system error writing configuration data

  Hello

  Cannot start. On the start screen have the message: write data the system configuration error. Only options F1(setup defaults) and F2 (setup). This occurs after flashing the BIOS.

  Computer laptop satellite A210 model PSAFJE.
  BIOS file was: M10A200. ROM

  Its possible flash from the BIOS? Maybe isn't here document key or combination of keys?

  Any ideas?

  Arturas

  Post edited by: Arturas

  Hello

  > This happens after flashing the BIOS.

  Looks like something was wrong with the Bios flashing procedure. To reflash the bios you back base Bios and usb floppy.

• When I try to use msconfig, I get an error message that reads; SYSTEM CONFIGURATION XRX55 100 24956__

  When you try to use the system setup, I get the following error message.
  An access denied error was returned while attempting to change a service.  You may need to log on using an asministrator account to make specific changes.  I am logged in as administrator on the computer.  I used to be able to make these changes up until October or November 2009.  I think that something could change when the automatic updates have been downloaded.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Could you please answer these money questions?

  (a) do you have the latest changes on your computer?

  (b) error only occurs with the system configuration utility?

  Method 1:

  This issue may also occur if your computer security program blocking the system configuration utility, so disable the security program and check the issue.

  Method 2:

  If the steps provided above don't resolve the issue, and then create a new user profile.

  You must create a new user account and check the question of do you need to follow the steps below.

  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Click on create a new account.

  Type the name you want to assign to the user account, click an account type, and then click on create an account.

  Now search for the question.

  If the problem is resolved, then you can follow the link below to the difficulty of the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For reference:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/b07c4b83-d0b6-4207-a7aa-6209dd0f9a88

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Unable to start Win8. Error: "0xc0000098. "The boot configuration data file contains no valid information for an operating system".

  Original title: Windows 8 will not start

  I have a pre installed Windows 8 pro and have therefore no disks in the system. It does not start, but I get a message from the "Windows Boot Manager" with the message "Windows couldn't boot...". «, etc, etc and told to contact the ' system administrator or computer manufacturer...» "then the information:
  File: \BCD
  Status: 0xc0000098
  Info: the boot configuration data file contains no valid information for an operating system.

  How can I get it back? Can I get a system disk or can I do?

  Hi David,

  Thank you for getting back to us with additional information.

  If you have another computer with Windows 7 or Vista installed, you can create Windows 8 DVD installation of this system. But you need to get the product key Windows 8 of the manufacturer of the computer. Please refer to this link and create a DVD of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Hope this information is useful.

• data has been replaced before it can be read by the system

  Hello

  I use a flow sensor that creates a frequency output and which connected to my PCI-6035E. When I run it, it works for a few seconds and then gives an error. Error 200141 ' data has been replaced before it can be read by the system. " I also tested with a pulse rather than the flow sensor generator, and the error only when I changed the frequency. How can I solve this prolem?

  Thanks in advance!

  Thank you for your answers, Bob.

  I got it now works, the problem was that I was using continuous samples. I am now a single sample with a while loop and it works.

• the API system configuration error 1097 and freezes

  I used successfully the API system configuration to detect and read information on a PXI chassis.

  But now, when I try to initialize and collated all information using a simple VI, the system returns error 1097 and crashes before the end of the VI.  Based on that the stop button does not work and I have to either soft or hard reboot the machine.

  I have attached a screenshot of it in a frozen state and error, like a report of what is installed on my system.

  The only thing I can think has changed since this last worked has been upgraded my MAX and other pilots from 5.5 to 14.0 and then the latest version as of today.

  It is usually the generic error, which means that some external code access violated the integrity of the system and the memory is likely to have been corrupted in the process. Since it is a NI API system AND it seems to have worked before, I guess it's not a bad disigned call library node, but a form of bribery in external code library itself which implements the API of the System Configuration.

  Reinstalling may solve the problem.

• The Event Viewer error on startup: "the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E.

  I use Windows XP with AMD processor clocked at 1.6 Ghz and 2 GB of RAM. This error appears in the event viewer whenever my computer starts. I don't know if it's doing any harm. can someone advise?

  original title: the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E

  Hello Steven,

  Did you ever receive notifications that a virus or malware has been removed from your system recently?
  My only thought is that it is the remains of an infection on your machine.
  It is most likely harmless, but I don't understand why you'd be concerned.
  Do you have any task scheduled to run at startup using Task Scheduler built into Windows?
  http://support.Microsoft.com/kb/308569
  I would check to see if there are tasks to run at startup:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tsconcepts03.mspx?mfr=true

• wuauclt.exe... application error the instruction at 0x003c2713 referenced memory at 0x7074746b could not be read error whenever I start up system.

  Original title: wuauclt.exe... application error the instruction at 0x003c2713 referenced memory at 0x7074746b can not be read

  Hello

  Get this message every time I start starting System... I have XP and the system is fairly new... I happen to buy and download a new version of "Registry Mechanic"... and this question popped up a few days after I started using it... If safe to say... He must have done something.
  Anything goes wrong... always fast system, and no further questions, but who want to fix the error... of what I can take. Please notify :-)
  Thank you!
  Mark

  Hello

  Step 1: Perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Startand then click run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Perform SFC (System File Checker) scan on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  1. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  2. at the command prompt, type the following line and press ENTER:
  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• Cannot open the Adobe reader protected mode due to incompatibility with your system configuration.

  Original title: trying to open a PDF file problems

  I use Windows 7 on a 32-bit computer with Firefox and Adobe Reader X 1.  Try to open a PDF with any application or attempt to open Adobe Reader via the icon programs, product now the following error message:

  «Adobe reader could not open protected mode due to incompatibility with the system configuration you.» Want to open Acrobat Reader with protected Mode off? "Answer either 'Yes' to this question produces:"Adobe could not load the DLL base. "

  On other occasions, trying to open the pdf file has directed me to an interface recommending me to open it with my Canon printer.  Try to change the default program used on a PDF file generates the above error messages previously.

  I reinstalled Adobe and who did it.  Clearly a problem for Adobe.  Regret not having tried that earlier, I thought that it couldn't be that simple.