Satellite L305D-S593 - disk read error

My Toshiba Satellite L305D-S593 suddenly stopped. At first I thought he had a little more heated or something, but when I tried to turn back on it gave me a message saying disk-read error press ctrl alt del to restart. I did several times in the same direction. While I tried to reinstall windows, I got lucky if she showed to the installation screen once it did, I followed the instructions for installation clean (I had to do it once before, but for different reasons).

Once he brought me to the menu had to select a partition to install on I said to do it on the main HDD after some loading and that time, he said that it was impossible to complete the formatting required. So I Redid the process and I noticed the music said it had 288 GB of available memory, but before that, I had only about 40. To remedy this, I clicked on the format button and it says that it cannot complete the action because the disk is about to fail.

PS My processor is 64-bit AMD Turion dual core mobile, with 4 GB of RAM

Hey,.

In my opinion, it has something to do with the HARD drive itself, I guess that it s a bad sector so Windows Setup can format t HARD drive properly. I mean before you tried to reinstall Windows, the system could not start due to a disc read error. This means that the files on the HARD disk are confused because of bad sectors

You can install Windows Toshiba Recovery disk?

If it doesn t work too, I'll try to replace the HARD drive. Usually, it is not complicated and can be done in 5 minutes.
In addition, you can check the HARD disk for errors with diagnostic tools special as Drive Fitness Test. Google a bit for such tools, they are freeware, so it s no problem to find. ;)

Tags: Toshiba

Similar Questions

  • Satellite Pro 4600: disk-read error occurs - press Ctrl Alt Del to restart

    I have a Pro 4600 which displays the error message "a disk read error has occurred. Press Ctrl Alt Del to restart "as soon as TOSHIBA logo goes.

    The laptop was given to me because the person who had tried to move to XP Pro and don't could not make it work, error with the CD Rom drive and she deleated the old OS (Win2000) off the coast.

    I took the hard drive and did a fresh install of XP by attaching the drive to another computer. The hard disk starts well on the other computer, but I get the error message on the Pro 4600.
    Any ideas. I know that I need to replace the CD Rom, but if I can't make it work, I don't want to drop money in it for a new CD Rom

    Thank you, Bob

    Hello

    Are you sure that the CD drive is dead?
    I have goggled a bit on the net and found some practical information that there may be some HDD malfunction.
    Some guys advised to use the command CHKDSK C: /R to solve this problem.

    But if it's a cd player error, it should be possible to disable the drive in Device Manager.

  • Satellite P10-304 Disk Read Error

    Hi people...

    I am trying to upgrade my computer portable HARD drive. I use an external enclosure and cloning software to clone the Toshiba HDD to a WD Scorpio drive more.

    The clone worked as far as I can tell and I can actually it boot via USB of the outer shell, but when I install in the mobile I have a disc read error. The speaker came with another Hitachi drive I tried the same result. I tried using the recovery disk of the product with the new drive but it wouldn't boot either, I tried the CD with the old drive so I know it works.

    Any suggestions as to what could go wrong for me here?

    Thank you!

    Will be the new HARD disk that is recognized by the BIOS?

    How much disk space a new HARD drive? Maybe the new HARD drive is great for this laptop and it could be interesting also how much disk space has the old HDD.

    In addition, I would like to make a BIOS update.
    What you can find on the European site of Toshiba.

  • Satellite L30 - 10V - disk read error. Please press ctrl + alt + delete for remained

    Hi guys

    Off my Friday morning L30 - since then it came with "playing a disc error. Please press ctrl + alt + delete to restart»

    Done several times - no joy so decided to drive the product recovery was necessary - put this in (& tried 3 times since!) & all I get is a menu 'Start repair' indicating "windows cannot repair this computer automatically" tried all options, he throws at me, but he said "If you continue to see this message, contact your system administrator or computer manufacturer for assistance."

    HELP PLEASE! It is FUBAR or can the sick man computer repair - or better yet - can it be fixed at home with a few suport?

    Thank you!

    Hello

    To me, it seems that the HARD drive has developed a fault.
    Error message: error reading disk. Please press ctrl + alt + del to restart is a typical notification if something would be wrong with a HARD drive

    You can try to check the HARD disk using a disk HARD Drive Fitness Test.
    It s free tool google for it if you need details

    Run the test and check if the HARD drive is OK.
    No, then you will need a new HARD drive and you need to reinstall the operating system.

    Welcome them

  • Satellite M40 does not start from hard disk - read error

    "I push the button - briefly see the In Touch with tomorrow TOSHIBA screen - then ' + a disk read error occurred press Ctrl Alt Del to restart +".

    I control alt delete brings me briefly on the screen TOSHIBA where I can choose either F2 or F12.

    Do I need a startup disk and where can I get one in order to boot from the CD ROM?
    Do I try to get into the Satellite M40 product Recovery DVD-ROM - this concern for me as the hard drive will be reformatted and all data will be lost.

    I'm stuck please help!

    Hello!

    If you enter the product recovery disc, Windows will be relocated and will be erasing all data on the HARD drive.

    I think that your HARD drive is damaged. You can check this with the Drive Fitness Test. Here you can download:
    http://www.HitachiGST.com/HDD/support/download.htm#DFT
    Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
    On the same site is a user's guide if you want to know more.

    By the way: you can save the data on the HARD drive, when you put it in a box external HARD disk. Then you can save the data on another PC, if the HARD drive is ok and have no errors.

    Good bye

  • Equium A200-1VO - "a disk read error has occurred."

    Hello

    I had my Equium A200-1VO since December 2007 and has never really had any problems with it atall.

    However, last night after a Windows Vista update and restart, my laptop won't start upward. I get a black screen announcing:

    "A disk read error has occurred.

    Please press Ctrl + Alt + Delete to restart»

    I've had no BSOD, and no other suggestion that something was wrong, everything worked perfectly. I checked the HARD drive to see if it had come off his link and reinserted it. But I get the same message.

    I am presented with the only possibility to use the recovery disk, but this means wiping everything out there and start again. I'd rather try to recover my documents before taking radical measures, if it is possible atall.

    If anyone has any suggestions I would be very appreciate.

    Thank you very much

    Mark

    Equium A200-1VO
    -Numtxpackets® Pentiuma® Dual - Core Processor T2310 - genuine Windows® Vista® Home Premium Edition - DVD Super Multi (Double Layer) in car-2 048 (1 024 + 1 024) MB of RAM (667 MHz) - 15.4 "WXGA TFT screen 1 280 x 800

    Hello

    In my view, the error message says a lot: theoretically, your HARD drive may be defective and must be replaced but before that I would test using fitness to drive or another program. Just use Google to find such programs.

    Maybe something was tangled up in your Windows installation. About reinstalling Windows?

    You didn't back up your data to a second drive? I m wondering about this, because the backup should always be made.
    However, if you use an external HARD drive box you can save it on another computer.

    Good luck! :)

  • 0xc00000e9 then a disk read error occurred. Press CTRL ALT DEL to restart

    desktop computer is Compaq windows update.  on restart received status 0xc00000e9 32\ntkrnlpa.exe leader: \windows\ system information: windows failed to load because the kernel is missing or corrupted.  Installed recovery disk, now have "a disk read error has occurred. Press CTRL ALT DEL to restart".stuck cycle.    suggestions?

    shonkg,

    HD can be at fault... do a chkdsk and make sure that your player or files are not damaged.

    http://www.w7forums.com/use-chkdsk-check-disk-t448.html

  • disk-read error press ctrl alt del

    I start to load Windows XP Pro and I get an error MSG before it comes to the first Windows XP logo, it reads the disk read error press ctrl, alt, del start I have checked all my connections and cables. I can add another hard drive and use bad like a slave and it starts up fine, and I went to the slave and looked everything I could think of, go back, it just above starts with the same error.

    Hello

    I suggest you get into the Recovery Console and use the where command prompt to run the chkdsk command. This scan the hard drive for bad sectors and recover any information from reading. To get instructions on how to enter the recovery console in Windows XP:
    The KB above also shows how to use the Recovery Console prompt.
    a. Insert the Windows XP startup disk in the floppy drive, or insert the Windows XP CD into the CD drive and restart the computer.
    b. Click to select all the options required to start the computer from the reader, if you are prompted.
    c. when the "Welcome" screen appears, press R to start the Recovery Console.
    d. If you have a computer dual-boot or multiboot, select the installation that you must Access from the Recovery Console.
    e. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER.
    f. type in the following command and press ENTER:
    Chkdsk /r
    g. once the command is executed type "exit" (without the quotes) to exit the command prompt and check if the problem is resolved.
     
    See also:
    Note:

    Warning of Chkdsk.
    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  • What happens when you get this message a disk read error occurred press CTRL, alt, delete

    I have a blue screen, which has this message "read a disk error occurred press control, alt, delete to restart, and when I do go to the first page of windows then return to the error.

    This should help you: http://www.tomshardware.com/forum/250364-32-solution-disk-read-error-occurred

  • A startup problem after that Windows updates were installed and a disk read error occurred.

    I have a laptop Dell Inspiron 9400

    Windows Vista Home Premium SP2 operating systems

    Last night, he showed 16 updates are ready to be installed the automatic updates.

    So I clicked to install the updates as I always do.  I have everything done exactly the same thing.  When updates

    have been made install prompted me to restart now for the updates to take effect.  I have clickedd the button

    Restart now and he acted like he was going to reboot except is went to a blue screen with a message that says:

    A disk read error has occurred.

    Press Ctrl + Alt + Delete to restart

    I tried several times by pushing the Ctrl + alt + del keys to restart my system, it does not start...

    It shows the DELL screen with the loading bar, which is in charge of the left to the right.  It then displays

    Back to the blue screen with the same Message (an office read error)...

    I tried once or twice as the system restart in Mode safe mode (F8)...   This doesn't work anymore...

    He always flashes back to the BLUE SCREEN with the same message.

    Please, can someone tell me why this would happen as a result of the windows updates...?

    How this can be fixed or what should I do to get my back operational system?

    Thank you...

    Shelly928

    Hi Shelly928,

    You can read the following article and try the steps to solve the problem:

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    Hope this information is useful.

  • My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.

    My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.  I can not get to the windows screen, cannot get in safe mode, only the BIOS screen. I managed to get the Samsung recovery screen once, but he said that he did not find the repair disc in! Help, please?

    It is possible that your hard drive is damaged. You can download Windows recovery disk (if you haven't) and run Startup Repair this one.

  • Disk-Read Error - what is wrong with my computer?

    Hello

    I have a HP Pavilion a1730n and this screen when I try to turn on the computer. It cannot start. Suggestions?

    "A disk read error has occurred. Press ctrl alt del to restart. "

    ----

    See post of other attempts (no success) (http://h30434.www3.hp.com/t5/Desktop-Operating-systems-and/Recovery-MAnager-Not-Working-Stops-midway... )

    Reading efforts and errors you received on your other thread it seems pretty obvious that your hard drive is bad. It could be as serious as a bad on the motherboard controller, but usually, it's only the hard drive.

    A hard drive can be replaced for about $40 and takes about 15 minutes to change. EX HERE

  • diskette drive 0 seek failure__a disk read error (press Ctrl alt del to restart)

    Hi I want to get help here

    has resolve an error on my 110 computer and I downloaded a fix from microsoft

    then he showed in floppy drive 0 seek failure

    has made computer at the time, but now he used he goes now to screen (disc read error). one of the records shows that it is 0 MB that maybe someone could tell me what to do in the configuration that I can't go to the computer via the system startup

    F2 or del is how normally get in the Bios.

    http://en.community.Dell.com/support-forums/disk-drives/f/3534/t/19125045.aspx

    Read the info at the link above.

    Diskette drive 0 seek failure

    Floppy drive 1 seek failure

    Diskette/tape drive controller cannot locate the specific sector or follow. Defective or badly inserted diskette, incorrect program installation system configuration settings, the diskette/tape drive interface cable, or bad power cable.
    Diskette read failure Failure occurred while the system tried to read the disk. Faulty diskette, cable interface drive diskette/tape faulty or badly connected or bad power cable.

    See you soon.

    Mick Murphy - Microsoft partner

  • my phone gives me a msg error disk read error

    Hello

    I have laptop HP G7

    everytime I turn on my laptop it gives me a disc error read error msg

    tried to run the F2 test got software failure iD Passed short test of short dst has no

    When missed the diagnosis frm the Bios test was passed?

    What can B done now?

    Click the White Star Kudos to say thank you *.
    Please check accept as Solution if it solves your problem *.

    Hello

    The disk error Self Test short seems to indicate a problem with the hard drive - is your G7 still under warranty?  You can check the status of your warranty here.

    Kind regards

    DP - K

  • Satellite L355 disk-read error/no safe mode

    I have a Satellite L355 with Windows Vista. When I start my computer, it says "Reading disc error, press Ctrl alt del to restart".

    I do not have the recovery disk, but I buy the Ultimate Boot CD. I have tried everything out there with no luck. It also doesn't let me start in safe mode. I press F8 at startup and it goes to a black screen with an underscore, and that's all.

    Any ideas would be helpful, I tried and looked everywhere. Thank you.

    Hi MissMandy,

    Why you don t have created a Toshiba Recovery disk?

    Well, right now it sounds like that your HDD is faulty. It is recognized in the BIOS correctly? If so, you could try to reinstall Windows from a Microsoft disc or order you a new Toshiba Recovery disk:
    https://backupmedia.Toshiba.EU/landing.aspx

    If it doesn't work your HDD is faulty and you need a new :(

Maybe you are looking for