Failed to backup one of my devices Apple iTunes on one of my computers

Similar Questions

• verification failed - there was a connection to the Apple ID server error?

  I am signing in iCloud, but whenever I try, a message appears saying: "check failed, there was a connection to the Apple ID server error" I can't use all the apps, and I tried to restore my iPad and reset my network settings and nothing works. Help, please!

  Try to connect to iTunes and insert it again (I know you talk about audit iCloud, but the signature of and then back into iTunes will ensure that the password that is stored on your device for your ID Apple is correct: settings > iTunes, select Apple ID, click on Sign Out, and then sign.)

  See you soon,.

  GB

• Apple TV 4th generation "audit failed there is a connection to the Apple ID server error."

  Can Hello someone please help me?

  I have a 4th generation Apple TV and I can't seem to accept my apple ID and password.

  That's what I've done so far:

  Chosen English (United Kingdom)

  Chosen UK

  Tried to associate a device with the establishment (iPhone 6s)

  Has no more than 10 times, even if the password is correct

  Error message that appears is "audit failed there is a connection to the Apple ID server error."

  Tried the manual log, same error message.

  Tried the manual paper but this time I skipped the Apple ID Login, to see if I could connect via iCloud and ITunes manually in the menu, same error message appeared.

  It recognize my wifi, so this isn't a problem. Restored to factory settings.

  Connected on my computer apple laptop not and connected on iTunes Music store to enter the password and verified it was OK, write down each letter/number, I typed the.

  Tried to pair the device several times over, has kept getting the same error message. The manual bit once again, same error, again restored factory settings.

  Went on my iTunes on my phone account and disconnected, and then reconnected in.

  Tried to pair the device several times with the same result.

  Tried to do the manual setting over 15 times. Same mistake. Restored the factory settings once again.

  Changed my password for my iPhone and laptop updated Apple.

  Because the Apple TV is now connected to my wifi that he decided to do an update. I waited 15 minutes for this, so I could try to use my new password for apple now.

  Tried to pair the device again. Still getting the same error message.

  Why is it so difficult? What I'm doing wrong here? I did this for 2.5hrs now. Can someone help me please?

  You are in the United Kingdom

• Change the name of the device Apple Watch?

  The Apple community,

  I have two Apple watches, one for me and one for my wife. We both use the same Apple ID and password for everything. How can I change the names of the devices Apple Watch for each of the watches? That's what I see my thing.

  Thank you

  Jose

  

  Hi Jose

  Your best solution is to use separate Apple ID, coupled with the sharing of the family, with each person's iPhone (and other devices) connected to their own Apple ID. Some features probably otherwise not work as expected.

  Create a new ID Apple for yourself or your wife:

  https://www.Apple.com/support/appleid/create-signin/

  To continue to share its purchases (including purchases beyond), set up sharing of family:

  http://www.Apple.com/icloud/family-sharing/

  Implement the family sharing - Apple Support

  Before starting this process, which will be implemented with the new Apple ID should initially désapparier shows them:

  - Pairing your Apple Watch and Support Apple - iPhone

  Once the new Apple ID has been created and is used on their iPhone, then they should associate their shows to their iPhone again (unless, of course, a new watch), this time in the title of their new Apple ID:

  Set up your Apple Watch - Apple Support

• During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

  Original title: identity of unknown folder

  During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

  Can you tell me with regard to this issue, and what, if anything, I have to do?

  Thank you.

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

  "If no part tool above work try a third popular called Unlocker.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• How transefer library of music to another device (Apple Music)

  I just purchased a subscription to the music of Apple and added music from my existing iTunes about 1400 songs library (not all songs have been purchased directly through iTunes but most were). Once I enabled the Apple music subscription however, my Macbook is no longer directly sync to my iPhone. This includes all my previous music and playlists as well. I would really only two devices to have the same things, but I can't figure out how to transfer all the music on my iPhone since my Macbook that contains my complete library. Can someone help me please understand the best way to complete this transfer without having to download all via wi - fi?

  https://discussions.apple.com/thread/7163823 - if you subscribed to Apple music or iTunes game, you will not have to run manually or synchronize music on a device in iTunes. Synchronize your music is made by iCloud and all of your eligible music should appear there. Movies can always be synchronized.

  A little more on this subject and a few options - https://discussions.apple.com/thread/7194995 and: move content from iTunes on your computer to your iPhone, iPad or iPod touch - https://support.apple.com/HT201593

  and a workaround to disable iCloud temporarily so that you can sync using iTunes - https://discussions.apple.com/message/28842873#28842873

• How can I stop my police in failed mail at the time new Roman apple sent emails

  How can I stop my police in failed mail at the time new Roman apple sent emails

  Mail > Preferences > fonts and colours

  

  .

• Means erasing a device as "logout" of the device identifier associated with this device Apple?

  Means erasing a device as "logout" of the device identifier associated with this device Apple?

  If an individual has forgotten to "disconnect", a device before removing the device, is that Apple ID automatically disconnected from the unit, or is it necessary to reconfigure the device with the existing Apple ID just so you can disconnect this Apple ID between the device and then erase the device?

  I found an article of Apple who deducts that wipe a device also signs the Apple ID, but article does precisely this.

  Thank you

  John

  WeaverJK wrote:

  Means erasing a device as "logout" of the device identifier associated with this device Apple?

  If an individual has forgotten to "disconnect", a device before removing the device, is that Apple ID automatically disconnected from the unit, or is it necessary to reconfigure the device with the existing Apple ID just so you can disconnect this Apple ID between the device and then erase the device?

  I found an article of Apple who deducts that wipe a device also signs the Apple ID, but article does precisely this.

  Thank you

  John

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• How can I get my account number of the device Apple Watch and iPhone 5?

  How can I get my account number of the device Apple Watch and iPhone 5?

  Try this below - it can help you!

  In the Apple Watch app on the iPhone, under My Watch > booklet & Apple pay > [your specific credit card]

• my iphone says verifivstion failed there is a connection to the apple id Server error

  my iphone says verification failed there is a connection to the apple id Server error

  What are you trying to do when you get this error? Sign in settings/iCloud?

• Deployment failed due to one or more of the returned errors

  Hi all

  JDev: 12.1.3

  I am getting below error while deploying the application in the Android emulator

  Installation of the platform:

  Location of the SDK: D:\android-sdk-windows

  Location of Android platform: D:\android-sdk-windows\platforms\android-17

  Android built location: D:\android-sdk-windows\build-tools\17.0.0

  Error

  [17: 28:50] copy of the adfmf file - manifest.properties...

  [17: 28:50] start to archive the folder "/ C:/JDeveloper/mywork/CalendarApp/deploy/Android2/java_res/assets / ' to 'assets.zip '...

  [17: 28:54] deployment of Cordova Plugins...

  [17: 28:54] copy the plugin "CalendarPlugin" resources of C:\JDeveloper\mywork\CalendarApp\ApplicationController\src\plugins\CalendarPlugin\Android\res to C:\JDeveloper\mywork\CalendarApp\deploy\Android2\res...

  [17: 28:54] copy the plugin "CalendarPlugin' active C:\JDeveloper\mywork\CalendarApp\ApplicationController\src\plugins\CalendarPlugin\Android\assets to C:\JDeveloper\mywork\CalendarApp\deploy\Android2\java_res\assets...

  [17: 28:54] Creation of unsigned Android application file...

  [17: 28:54] run command line: ["D:\android-sdk-windows\build-tools\17.0.0\aapt", p, - debug mode - f, - m, - J, "C:\JDeveloper\mywork\CalendarApp\deploy\Android2\src", "C:\JDeveloper\mywork\CalendarApp\deploy\Android2\AndroidManifest.xml" -, M, - min-sdk-version, 15-, target-sdk-version, 9, - name version, 1.0, - version-code, 1, - extra-packages, oracle.idm.mobile, - F, 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\CalendarApp.apk', - I, 'D:\android-sdk-windows\platforms\android-17\android.jar', - S, "C:\JDeveloper\mywork\CalendarApp\deploy\Android2\res"] "C:\JDeveloper\mywork\CalendarApp\deploy\Android2\java_res"]

  Invalid resource directory name [17: 28:54]: C:\JDeveloper\mywork\CalendarApp\deploy\Android2\res/readme.txt

  [17: 28:54] command-line execution failed (return code: 1).

  [17: 28:54] run command line: 'D:\android-sdk-windows\build-tools\17.0.0\aapt' p - debug mode - f m-J 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\src' m 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\AndroidManifest.xml' - min-sdk-version 15 - target-sdk-version 9 - name - version 1.0 - version-code 1 - oracle.idm.mobile extra-packages - F 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\CalendarApp.apk'-I 'D:\android-sdk-windows\platforms\android-17\android.jar"s 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\res' 'C:\JDeveloper\mywork\CalendarApp\deploy\Android2\java_res '.

  [17: 28:54] Server Android Debug bridge closure...

  [17: 28:55] undeployment.

  [17: 28:55] - incomplete deployment.

  [17: 28:55] deployment failed due to one or more errors returned by "D:\android-sdk-windows\build-tools\17.0.0\aapt".  What follows is a summary of the returned error:

  Command-line execution failed (return code: 1).

  Hi Richard, Arun

  Problem has been solved now.

  Question is is that I created a folder for the project of jdev. Created file's readme default text in it.

  Causing the problem while deploying the application

  Once, I deleted all the readme .txt file in default the entire file. Problem solved.

  Thanks for the effort.

  Kind regards

  Krishan

• I need help with the wireless system. One of my computers doesn't seem to get signal

  Hello, I installed Belkin F5D8235-4 router and im get the signal on one of my computers. On the other computer, it seems that im getting the signal, but it says unidentified network. When I try to open the internet it says is Interenet Explorer cannot display Web page. Do you think this could have to do with the card in my computer is not not compatible. I have an Atheros AR5007 802. 11 b / g WiFi adapt. IM thinking that if I buy a D-Link wireless G USB adapter, USB wireless adapter Compact of Linksys or a Belkin 54 G Wireless USB Adapter my computer may be able to get the signal. What can I do? Help please

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? With the help of WPA/WPA2 security? You put on the G and N or N
  only? A to G for this adapter connect the send.

  Your Atheros should be consistent - could be drivers.

  Actually try updating your driver and disabling the network logon. (To do this, use a wired connection or)
  Download drivers on another machine and transfer on removable media).

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Download iOS 10 update once for installation on multiple devices via iTunes?

  I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.

  Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.

  Almost certainly not.

  Each version of the product Apple has its own download.

• Backup in videos and photos as iTunes backup

  My son has a ton of pictures (and videos) on his iPhone 5s. There are currently on IOS 8.x. I want to upgrade his phone to the standard ISO 9.x. If I connect to iTunes and do a "backup", everything on the phone (including photos and video) gets backup upward? I know that when I connect my iPhone, the Photo app opens asking me to download my pictures from my phone. I know that it is a good idea as well, but if I skip that step and JUST do the iTunes backup, I know where I have to erase and restore the backup? I will answer all my photos as well?

  Thank you.

  On the backup and restore

  1 choose a backup method iOS (if I use iTunes or iCloud to save...)

  2. backup and restore your iOS Device with iCloud or iTunes

  3 iTunes: IOS backups

  4. create and delete iPhone, iPad and iPod Touch backups in iTunes

  5 iOS: troubleshooting of encrypted backups

  6. find and manage your iTunes backups

  7. backups iTunes-About iOS

  8. If you need help, restore from a backup of iTunes

  9. restore your device from an iCloud or iTunes backup

  10. on safeguards in iCloud and iTunes

  A particular interest should be 10 point above which explains how iOS and iTunes backups differ. Normally, the photos are stored on the computer or in a pictures/iPhoto library, rather than in iTunes or iOS because of concerns of the storage space. It's the same for videos. Both, however, can be stored in your iTunes for syncing your devices.

• How can I add a new desktop PC to my Apple iTunes account?

  My old desktop PC crashed and had to be trashed. I bought a new desktop PC and can not find directions add to my Apple iTunes account so I can download music to my iTunes Store account. HELP Please!

  The songs of restoring a backup, or use these instructions to redownload them through the iCloud, if it's free in your country.

  (140432)