Means erasing a device as "logout" of the device identifier associated with this device Apple?

Similar Questions

• How to see what the music is associated with one old apple ID?

  I have a huge itunes library.  I bought a lot of music itunes ten years, but I no longer remember the password associated with the account and can't get back into that old email.

  A lot of old pop albums now upward with a prompt to enter in this old apple ID and password. ("This computer is not allowed to read _.  You want to allow? ") I think it's impossible that Apple will never be persuaded to grant me access to the purchase of my old, because of course that they would prefer just to buy it all again.  It was all accounts in debit of one thousand cards, different States, different computers, PC, mac, etc. only my name is the same.  If I'm wrong, pls let me know.

  At this point, I just want to replace it all myself, but I don't know what to replace.  Is there a way to identify what parts of my library are associated with a particular apple id without actually connecting to this id?

  I think it's impossible that Apple will never be persuaded to grant me access to the purchase of my old, because of course that they would prefer just to buy it all again.

  I don't think that's true.  Apple profit comes mainly from the sale of hardware products.  Services such as iTunes Store probably make money, but they also exist for 'value' for Apple hardware customers, so that they will continue to Apple hardware customers.  According to my experience, customers of iTunes Store was accommodating when I needed their help to fix a problem with my iTunes Store account.

  You will need to contact them directly, however (don't be not contradictory).  Most of the responses here (Apple users discussion forum) are your fellow users of Apple, but I saw a response with an Apple logo recently, in the section below.  I think the answer applies to your situation

  My iMac won't play songs purchased with an ID previous Apple is in the system.iMac, 2.8 Ghz, 4 GB Ram, OSX 10.11.2, iTunes 12.3.2.35

  The key is to get your reactive old Apple ID.  You may be able to retrieve your forgotten password.  If you do this, you can allow your current with this old ID Apple Mac (although it is authorized for former and current Apple ID), and these old purchased songs will play.

• Connection to the MDEX error. The data service associated with this editor is not properly configured.

  Hello world

  I just change the demand for short CRS, I added an adapter record pipeline everythings run ok and I can download data and search for data using the endeca_jspref page. But when I open the Workbench of short and tried to look at the properties, this error is displayed.

  Any sugestion?

  

  It's the new Pipeline

  

  It's the editors.xml on the APPS/CRS/config/editors_config/editors.xml

  <EditorConfig xmlns="http://endeca.com/schema/editor-config/2010">
      <EditorModule url="/ifcr/tools/pbx/modules/editors.swf">
          <!-- Default Guided Search Editors -->
          <Editor name="editors:BooleanEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:ChoiceEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:ColorEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DynamicSlotEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:NumericStepperEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:RadioGroupEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:RecordListEditor">
              <EditorConfig resourcePath="/configuration/tools/xmgr/services/dataservice.2.json">
                  <RecordsPerPageOptions>
                      <RecordsPerPage>10</RecordsPerPage> 
                      <RecordsPerPage>25</RecordsPerPage> 
                      <RecordsPerPage>50</RecordsPerPage> 
                  </RecordsPerPageOptions>
              </EditorConfig>
          </Editor>
          <Editor name="editors:SliderEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:StringEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:StringMapEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <!-- Experience Manager Editors -->
          <Editor name="editors:BoostBuryEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DebugEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimensionListEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimensionSelectorEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimvalListEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:GuidedNavigationEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:LinkBuilderEditor">
              <EditorConfig>
                  <host>localhost</host>
                  <port>15002</port>
                  <spec></spec>
                  <searchKey></searchKey>
                  <rollupKey></rollupKey>
                  <matchMode>allpartial</matchMode>
                  <imgUrlProperty></imgUrlProperty>
                  <properties>
                  </properties>
              </EditorConfig>
          </Editor>
          <Editor name="editors:RecordStratificationEditor">
              <EditorConfig resourcePath="/configuration/tools/xmgr/services/dataservice.2.json">
                  <RecordsPerPageOptions>
                      <RecordsPerPage>10</RecordsPerPage> 
                      <RecordsPerPage>25</RecordsPerPage> 
                      <RecordsPerPage>50</RecordsPerPage> 
                  </RecordsPerPageOptions>
              </EditorConfig>
          </Editor>
          <Editor name="editors:RichTextEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:SortEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:XmlEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
      </EditorModule>
      <GlobalEditorConfig></GlobalEditorConfig>
  </EditorConfig>
  

  Hi all, I'm here to say that I found the problem on the dataservice.json it is located in APPS/CRS/config/editors_config/services/dataservice.json, the CRS app uses a key repositoryId, rollup and I added a few records that do not have this property if when the CRS app tries to make the group by using this key, it fails.

  Best regards!

• BlackBerry smartphones enter the username associated with this smartphone

  When I login with my ID blackberry an apper message telling to enter the user name associated with this smartphone

  Please help me

  In fact, it is not likely to help... to refer:

  • KB28429 "Please enter the username associated with this smartphone" appears by connecting to BlackBerry App World with a BlackBerry ID using a smartphone BlackBerry 7

  To paraphrase, what this means is that there is already a BB ID associated with this BB, and there is only one way to change the association ID BB to BB:

  • KB26694 How to change the BlackBerry ID on a BlackBerry smartphone or BlackBerry PlayBook Tablet

  Whereas a WIPE seems drastic, it is nevertheless the only way to change the ID of BB BB is associated.

  Good luck!

• Is there a way to find the IP address associated with a device that is currently using my Apple ID?

  Hi, is it possible to find the IP address associated with a device that is currently using my Apple ID? There is a device currently using my Apple ID, and I would like to know its IP address. When I connect to appleid.com, the device is listed. The device is an iPhone. It is an emergency situation. Thank you.

  Unless it's on your local network, the IP address won't be useful to you in any way. (and no, you can do that)

  If this is really an "emergency", inform the authorities.

• In the face of "the device associated with this extension or the dial number is not valid" when you use DX80 telepresense phones

  Hi team,

  We have EX and DX series telepresence as endpoints agent. But DX series phones are facing issue "the device associated with this extension or the dial number is not valid" when checking in the agent. EX works very well. Both phones are properly recorded in CUCM.

  Can you please help me out here to solve the problem.

  Thanks in advance,

  Sisi.

  In my case, we tried to do a few different modifications here and there on the DX650 but never managed to do work.  Randomly, I was able to connect to the fineness with the DX650 as my camera, then my colleague could not connect to the Finesse with his 9971 as his camera - (keep in mind this was in an environment of model and it was just her and me as agents).  Since I saw this strange behavior and doesn't do not sense, we rebooted the server CCX. Once she is back to the top, we were also well able to connect successfully and had not had the problem since.

  Thank you

  EK

• How can I change the physical address associated with my Airport Extreme

  I moved, but when I look for devices by using find my iPhone devices connected to my Airport Extreme base station seem to be at my old location. How to upgrade the physical address associated with the Airport base station?

  To the best of my knowledge, there is no way for the user to do. Finally, the database of Apple will update. There is some anecdotal evidence of that having an iPhone connect to airport speeds the process.

• I have a power shot sx HS 40 & need information about the use of filters with this camera? Thank you ~.

  I have a power shot sx 40 & would like information on the use of filters with this device?

  Thank you ~.

  Hi Rainlily,

  You will need the # model Canon adapter filter f-DC67A to use filters on this camera, which costs about $25.00. Bower makes one for about $9.00 available in B & H and Bower products work well with the Canon. This adapter uses 67 mm filters. If you have not yet all filters, I would recommend Hoya or Tiffen filters as they are of high quality at reasonable prices. Do not get the expensive filters because in general they can cause color casts that may be difficult to view the process on. Have fun!

  Steve M.

• BlackBerry Smartphones bb app world says "enter the username associated with this phone! Help!

  Hello! World app of my bb9300 used to work and then I forgot the password! It's when he began to play up he said now I should "enter the username associated with this phone"-i I wiped the phone twice but its doesn't work simply do not!

  Hello from straw,

  Welcome to the Blackberry community

  If you had wiped your device then you need to create your ID blackberry again associated with your email.

  Set your username and password then try World Apps login.

  Good luck

  Prince

  Click 'Like' If you want to thank someone.
  If problem resolves mark message (s) as a 'Solution', so that others can use.

• message error "the file is associated with another photo in the catalog.

  CC of LR, windows, photos on external hard drive

  Files that I was still using yesterday now are more connected to the catalog.  Try to locate the files I get the message "the file is associated with another photo in the catalog. How can I find and solve.

  Thank you

  This is because this same image, same time date and time of the device, is already in the catalog using a different file name.

  Conversely having not happening again is to STOP Renaming files on import or manually in the file manager or with another image, software.

  Each camera has a system that can be customized if necessary if you have 2 cameras of the same brand and model of separate file naming. And even then, they are separated by the serial number of each camera.

• Find all the unique ID associated with a virtual machine

  is there some sort or any command that I could find all the unique ID associated with a virtual machine?

  I mean like ID: ID hardware, CPU ID, UUID, MAC address and etc...

  This should help you

  https://psvmware.WordPress.com/tag/VM-UUID/

• Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  Hello I am trying to download an episode of my Podcast podcast connect and get this error?

  Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

  It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

  Your show is already in iTunes.

  https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

  And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

  That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

  Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

  Rob W

  https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2

• Im still on 10.5.8 on my G5, I use the mac to pay the Bills... can I update to the latest browser safari with this OS?

  Im still on 10.5.8 on my G5, I use the mac to pay the Bills... can I update to the latest browser safari with this OS?

  N ° try to use TenFourFox.

  (143086)

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• BlackBerry smartphones can not verify my blacberry id - enter the username associated with this phone - ARGH!

  I just got my blackberry a few days ago and it makes me nuts trying to get this set up. I'm pretty tech savy, but not when it comes to this phone.

  I created an account via blackberry, but then I could not for the life of me remember the password I put on it. So, which became a nightmare and I ended up deleting this account and set up a new through the computer.

  Now, every time I try and connect to this, as the app world to try to put things in place and not - I get the error message "enter the username associated with this smartphone.

  So I enter the new name of user and password I put in place and it works so of course I tried to get all blackberry programs set up on my computer and connect the phone to my computer - but my house is a deadband for cells - so I can't do set up because I can not access my "data plan" in my house.

  I recorded my phone, I have taken the battery all that fun stuff - but it's still not working! That makes me BONKERS - I can not set up email, bbm anything because I can't access my account - ARGH! I really hope that someone can help you.

  No doubt because I posted this - my friend that I couldn't reach finally called me and told me to do a security wipe and then start again. It WORKED! So if anyone has this problem, just try to do a wipe