Failed to clean of the ADOPTION

Similar Questions

• El Capitan utility disk first aid fails - unable to unmount the volume for repair

  Question: Given the following error with Disk Utility first aid and success with diskutil check volume, I should consider my drive damaged or volume?

  After a crash of the system on my Mac mini (end 2012) running that OS X El Capitan 10.11.3 has experienced a kernel panic induced by the adapter USB Wi - Fi, I dutifully ran first aid utility disk on each volume on the disk, in order to ensure the integrity of system files.

  What I feel with disk utility (GUI) first aid:

  First aid process has failed. If it is possible to backup the data on this volume.  Click OK to continue.

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Updated support for the volume partition that

  Impossible to disassemble for repair volume

  Operation failed...

  (underlining)

  Additional information: I didn't have any problems with this disk volume. I use it only as a Time Machine backup destination. It is an encrypted volume OS X Extended (respect for case-sensitive). My concern involves only disk utility complaint that its "first aid process has failed."

  After reading the complaints in other forums that utility disk on El Capitan has been "dumbed down" and can not perform many of the functions that the utility of the same name used to be able to perform in previous versions of Mac OS (complaints, I can't confirm because I'm relatively new to MacOS - although extremely in computing with Windows, UNIX and Linux) (, so I didn't get to use disk utility a lot, before El Capitan), I decided to do the same "check the volume" that I knew first aid was trying to perform with the diskutil command-line app.  Guess what? No error!:

  What I have experienced with command-line diskutil:

  sudo diskutil verifyvolume disk9

  Audit file system began on disk9 6TBMacOS_1_Archive

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Check the file system

  Using the live mode

  Perform direct verification

  Logged more HFS volume control

  Detected a case-sensitive volume

  Checking extents overflow file

  Check the extended attribute file

  Checking volume bitmap

  The 6TBMacOS_1_Archive volume seems to be OK

  File system check exit code is 0

  Finished on disk9 6TBMacOS_1_Archive file system check

  I will finish success of diskutil verifyvolume that my disk volume is not serious and that Disk Utility first aid simply does not correctly?

  Thank you!

  -IlDavo-

  I think you might be able to do a repair of first aid, after you have disassembled the drive first:

  1. Run OS X by an external device (ex: USB mode, or external hard drive or disk target from another Mac)
  2. Launch the Terminal and run the following command umount f /Volumes/ (ex: umount f/Volumes/Macintosh\ HD)
  3. Then run disk utility first aid.

  I had this problem on a Macbook Air, I tried to recreate the image to work, so I didn't need to get anything off the drive. I tried to format the drive and reinstall OS X. So I don't know if first aid work after disassembly, but it worked without a doubt after that I did the first two steps above and then deleted from the disk. Not sure if this will help, but worth a try, I guess.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows failed to load because the file ntoskrnl.ex is missing or corrupt__

  I tried to boot into normal mode, then the safe mode and last good configuration. I even tried with the disc provided with the laptop system, he would load windows error code, e Th problem started last night after having tried and failed to a windows update. the computer locked upward and when I went to resart, I got the above error code

  You have a hardware problem any.  Here are some tips for troubleshooting hardware problems, but they are fundamental and I guarantee you you will succeed with them (and some options should be analyzed with spare parts which you probably haven't) but it's worth a shot. http://elephantboycomputers.com/page2.html#Hardware_Tshoot.

  If this does not help, then it's time to hold a workshop of computer repair of reputable (NOT Geek Squad or one of these centers of department store) or return to the manufacturer for diagnosis and repair.  Check out several options and compare the costs, quality and guaranteed and then make your best choice.  Don't forget to back up your data before sending or bring it because there is a good chance they're going to wipe the hard drive clean in the process.

  I'm sorry he has reached this point, but we have exhausted all other options and it is the only remaining option.

  I hope this helps and that the problem is simple and inexpensive to repair.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• cancel the adoption phase = prepare duly completed successfully

  Hello

  I was about to apply a Patch. But I realize that I didn't need.

  I have performed adoption phase = prepare and this is completed successfully.

  What should I do? nothing and adoption left to prepare the phase or: adopted phase = phase of demolition then = cleaning mode = full adoption?

  Thank you.

  Luis

  Hello

  According to the documentation, you must perform cleanup after interrupt you a cycle of correction.

  However, it does mention the abandonment of a cycle of correction without doing anything.

  To be in the right side, run the cleaning with or after the demolition.

  adoption phase = abandonment, cleaning cleanup_mode = full

  Kind regards

  Bashar

• I have thunderbird 24.5.0; I try to install lightning 2.6.5. Fails with "cannot edit the necessary file. OS is win 8.1

  Information about the supported spoke on the decompression of the xpi files. All I want to do is to install an add-on. I tried "extra everything" and it failed. I need the very explicit instructions on installing this add-on, please. This shit should not be difficult...

  This sounds like a permissions Windows 8.1 user problem. I have installed Lightning in TB on Windows XP, 7 and various flavors of Linux with no problems at all. I do not use Windows 8.

  Has he asked permission to make changes to the computer? Have you tried to do this install with administrator privileges? When I fall on installation issues, and it is any program, not just TB, it's because I try it on the computer at work where the IT Department controls what simple end users are allowed to do.

• Utility of fingerprinting Toshiba - "Failed to connect to the sensor.

  Having a problem with the Toshiba fingerprint utility. The program works fine until I try to use any sort of firewall/antivirus program, even the built-in Windows Firewall: S the scanner still works fine for the boot time scanning, as well as for windows logonm but as soon as any kind of firewall/antivurus software loads up, it fails to connect on the sensor. I added the program to the lists allow but still nothing... So far I tried with AVG Internet Security, Outpost Security Suite and by default, the Windows Firewall. Windows Firewall turned on for awhile, I got when I bought the laptop and there was no problem.

  It's a Qosmio X 500 - 00 X, it uses the same installation of windows when I bought...

  See you soon!

  Hello

  Please update the software of fingerprint. You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try a different firewall and AntiVirus. I have good experiences with AntiVir and Kaspersky Security Suite.

• Cannot clean up the queue and print the new document

  All of a sudden in trouble with my C6180 all-in-One. It didn't print a document remaining queues. Tried everything to clean up the queue. But nope. Document is in the list. Document status information: deletion. And never remove the ends. Right now my printer is not a printer. Can anyone help?

  Hello

  In Control Panel, open administrative tools and select abuse.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the tasks within this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• the adobe flash plugin failed and none of the solutions have helped

  the adobe flash plugin failed and none of the solutions listed in the section help objects! I tried all the solutions listed, but none seem to work.

  This has happened

  Each time Firefox opened

  He started a week ago ==

  Why Flash is now so unstable in Firefox? Flash broke down indicator is now a familiar visitor (it's usually when I refresh the page isn't extremely mortal!) But... I'll have to go back to IE to check the reliability with my own sites - which are heavily dependent on flash for animation and video. What can we do? My installations of Firefox and Flash are updated. Really disappointing.

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• Instructions on the cleaning of the cooling fans

  1. power off the laptop
  2. get a vacuum cleaner with the brush attachment & show
  3. get the nozzle close until the events of fan for laptop - own, both rear - all holes that air breaks down through.

  * BE CAREFUL NOT TO ASPIRE KEYBOARD KEYS *.

  You'll see the fans turn as air sucks by and sucks all the dust!

  Result - cleaner machine & radiator CPU - running cooler

  Hello Nigel

  Thank you very much for your useful description how to clean cooling fans.
  I read some comments here and there are a lot of users who ask for cleaning methods.

  concerning

• Satellite L505-10J - cleaning of the radiator system

  Hello!

  My L505-10J system heat sink seems to be sprinkled at the same time, that the fan is more comparative work initially and to the exhaust air flow is barely perceptible.

  My old laptop manufacturing another hat cover to access the RAM slots and fan/radiator as well... remove dust was easy enough.

  L505-10 days don't have that easy access to the fan, looks like I have to open it completely.

  Am I losing the warranty if I opened the laptop for the cleaning of the questions? Is there an easier way to clean?

  Thank you and best regards,

  daFlox

  Hi daFlox,

  I use Toshiba laptops for years but I never opened it to clean the radiator system. This is not necessary because you need only spray compressed air to do this. Just blow air through the BACE h of the cases where the fan is. This can blow off the dust. You can get the jet of compressed air from each dealer computer I think.

  By the way: even I found this article in the section fair questions:
  [http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40 | http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=105]

  And if you open the case, you will lose your warranty, that's right, but as I wrote it to clean your system it s is not necessary.

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.