Weird view of Array Probe

Similar Questions

• Weird views Finder

  This has been a strange computer morning.  After re-booting, then stop for five minutes and start it again, I keep trying to find a necessary 'Word' file using the Finder.  This is according to 'Word', but I don't see it or the files of three main in the Finder.

  Here is a screenshot:

  

  It seems to be the only file on the computer that shrinks the first three files in the viewer of files no matter how little I do the real documents Viewer.  All suggestions and all help will be be accepted with gratitude.  Thank you!

  Try another look

  

• Weird view from 11.0.07 on Win 8.1 update

  Hello

  A few weeks ago I've updated my Adobe Reader XI to 11.0.07 on my laptop using 8.1 to win... And since then, some parts of the computer program you want really oversized to the rest text for example. For example my note seems gigantic, so I can't read them all it (and he of doent matter if I use underlining or any other style of notes), also buttons 'Comments tool, Signieren,' and the MenuBar of hole. It's really awful to work with this point of view, more than anything, I will have only a screen 13 "on my laptop.

  How can I change this or is there any possibility to change? I will be happy if receive little help. If I can't change it I'll have to use another software for the job at the University, because it's really boring.

  

  See http://helpx.adobe.com/acrobat/kb/hi-dpi-retina-display-support.html

• Problem with RAID array after replacing defective RAID controller - Volume is currently in INACTIVE/GRADIENT condition

  We have a Dell PowerEdge 840, who had the RAID controller out yesterday - the system has come from a "ERROR!" Faulty card message.

  We replaced the controller with one we had shipped from one day to the next. System has been turned off, we made sure the installed updated Earth, etc etc. As soon as the system voltage, the following message came on the screen:

  ===============================

  Exception of RAID integrated detected:

  Volume (00:130) is currently in INACTIVE/GRADIENT condition

  Enter the SAS Configuration utility to study!

  ABILITY TO REVIEW OF HBA ID LUN SUPPLIER PRODUCTS

  0 free SAS1067-IR 0.10.49.00 NV 25:0 D

  Dell Inc. MPT ROM boot, no device supported found!

  ...

  No available boot device.

  ===============================

  What should I do to rebuild the table and see the data? Apparently, the server crashed some time after the office closed last Friday, but before that backups ran, so that we have not backed up the data on Friday.

  Thank you

  Baskervi,

  Start the BIOS of the controller (CTRL-C)

  Select the controller

  This will bring you to the adapter properties window.

  Use the arrow keys to highlight and select Properties RAID, press on enter.

  This brings you to the window again select array Type, there is now an option to view existing matrix. Using the arrow keys, select view existing array,

  Select the Inactive matrix. Select manage the Array.

  The only options available is to activate the table or delete the table. In order to get this controller to accept the disk configuration, select Activate array by using the arrow keys to highlight, and then press ENTER.

  Confirm Activation.

  Return to the main menu and select SAS topology and check that the two tables are active.

  Let me know how it goes.

• Retrieve the duration of event "Sample profiling method.

  Hello

  I'm trying to understand how the JMC calculates the percentage of hot methods (which, according to the documentation, is the total time that the application has spent on the execution of code in the method), but the time I recover seem to be always zero and start and end timestamp is the same. The way I'm doing it follow below:

  
  

  Registration of FlightRecording is FlightRecordingLoader.loadFile (new file ("jfr file path"));.

  View IView = recording.createView ();

  Map < String, IEventType > eventTypes = new HashMap < String, IEventType > ();

  for (arisen event: view) {}

  eventTypes.put (event.getEventType () .getName (), event.getEventType ());

  }

  view.setEventTypes (Arrays.asList (eventTypes.get ('profiling Sample method')));

  for (arisen event: view) {}

  System.out.println (Event.GetValue ("(Duration)") + "" + ((FLRMethod) event.getValue ("((stackTrace) .method)")) .getMethodName ());

  }

  Any clarification is very appreciated!

  Thanks in advance.

  The sample profiling method do not have a duration,

  they are taken at intervals of 20 ms, for example, where a set number of threads is sampled.

  All threads cannot be sampled, for example ones that run native code.

  It really is "the percentage of the total number of samples taken in this method", which can be considered as an approximation of what the aide said "the percentage of the total time that the application passed on the execution of code in the method.

  To get this regroup all the samples with the same Executive, there is not a single sample for each method with a total length of this method.

  If you examine the event log and not activate Java Virtual Machine/method/profiling profiling sample in case types discovered, you will be able to see what kind of data you get.

• How can I view all the elements of an array?

  Hello

  I'm learning about the handling of tables.  The example finder includes this one, 'build array_forum.vi', which shows the two modes, concatenate and adding, I understand, HOWEVER, I can't understand how they built this vi.  For example, I can find the Array function to build, but I do not understand how they created the "digital data table 1" "data table 2" digital... etc, and I can't find the functions on the pallets that cause display "build the CONCATENATE entries table". ".  Where are these blue functions?

  Where these functions are found in the palette, and how we build them like that?

  The other vi indicated here, 'for loop array_forum.vi' is my attempt to reproduce, but it doesn't show all the elements of the array; However, it only displays a SINGLE element, the last element of the array.  How can I view all the items in the table I am creating using the FOR LOOP?

  Thank you

  Dave

  I think I posted this in the wrong place.  I reposted it on the forum of Labview.

  Dave

• DST and vmware view = weird questions

  This is the 3rd time that when the time comes or goes we get questions of kind of weird in our very frequent floating pools, VMs stuck in starting up, wait for connection etc.

  If you look at the log below you will see that the virtual machine has been one hour before, and then she came back at the right time.

  Anyone else seen elsewhere?

  2014 03-18 T 16: 06:36.553 - 04:00 INFO (016 C-0390) < Service main Thread > [wsnm_desktop] DesktopManager queue server is installed

  2014 03-18 T 16: 06:36.585 - 04:00 INFO 016c - 082 C < logloaded > [MessageFrameWork] "ws_filesystem - component of VMware View filesystem plugin" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.595 - 04:00 INFO (016 C-0830) < logloaded > [MessageFrameWork] Plugin 'wsnm_jmsbridge - VMware View framework JMS Bridge Controller' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.612 - 04:00 INFO (016 C-0838) < logloaded > [MessageFrameWork] 'ws_klog - plugin VMware View Kernel Log' Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0390) < Service main Thread > [wsnm] System Service VMware View begins

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0840) < logloaded > [MessageFrameWork] "ws_perfmon - VMware View Performance Monitor and counter shop" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0850) < logloaded > [MessageFrameWork] Plugin ' ws_vhub - Service USB virtual VMware View framework "support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0848) < logloaded > [MessageFrameWork] Plugin "ws_thinappmgmt - support for VMware View infrastructure Application Management" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.644 - 04:00 INFO (016 C-0854) < PluginInitThread > [ws_vhub] vhublib: initialized, VMware View virtual USB Hub API (64-bit) version: 5.5.0 build-966253, exit: unknown

  2014 03-18 T 16: 06:36.782 - 04:00 INFO (C 088-0890) < 2192 > program [MessageFrameWork] 'wsnm_jms - VMware View framework JMS bridge' began, version = 5.2.0 build-987719, pid = 0x88C, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 16: 06:36.806 - 04:00 INFO (C 088-0890) < main Thread > [] classpath option:-Djava.class.path=C:\Program VMware View\Agent\lib\; C:\Program View\Agent\lib\\agentjms.jar VMware; C:\Program View\Agent\lib\\commonutils.jar VMware; C:\Program View\Agent\lib\\events-client.jar VMware; C:\Program View\Agent\lib\\events-common.jar VMware; C:\Program View\Agent\lib\\gnu-crypto-2.0.1-1.jar VMware; C:\Program View\Agent\lib\\jdom-1.0.jar VMware; C:\Program View\Agent\lib\\jms-9.2.1.jar VMware; C:\Program View\Agent\lib\\jmswrapper.jar VMware; C:\Program View\Agent\lib\\log4j-1.2.14.jar VMware; C:\Program View\Agent\lib\\messagesecurity.jar VMware; C:\Program View\Agent\lib\\orchestratorj.jar VMware; C:\Program View\Agent\lib\\securitymanager.jar VMware; C:\Program View\Agent\lib\\sessionclientapi.jar VMware; C:\Program View\Agent\lib\\swiftmq-9.2.1.jar VMware; C:\Program View\Agent\lib\\v4v-msgserver.jar VMware; C:\Program View\Agent\lib\\winauth.jar VMware; C:\Program View\Agent\lib\\ws_appender.jar VMware; C:\Program View\Agent\lib\\ws_properties.jar VMware; C:\Program View\Agent\lib\\xercesImpl-2.9.1.jar VMware;

  2014 03-18 T 16: 06:36.818 - 04:00 INFO (088 C-08E4) < logloaded > [MessageFrameWork] "ws_javaview - VMware View Java Diagnostics Framework" Plugin, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.001 - 04:00 INFO (C 088-0938) < logloaded > [MessageFrameWork] Plugin "ws_java_bridgeDLL - VMware View Java Bridge Framework" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.002 - 04:00 INFO (C 088-0934) < logloaded > [MessageFrameWork] Plugin ' ws_java_native - Framework Java native Support of VMware View "load, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [ws_java_bridgeDLL] JavaBridge installed service EventLoggerService

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [] JavaBridge queue server is installed

  2014 03-18 T 16: 06:37.209 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer agent has completed the customization

  2014 03-18 T 16: 06:37.737 - 04:00 INFO (0624-0628) < 1576 > [VMwareView-RdeServer] program "VMwareView-RdeServer - VMware View RDE 32-bit Server" began, version = e.x.p build-1190491, pid = 0 x 624, buildtype = release, usethread = 0, closeafterwrite = 0

  2014 03-18 T 16: 06:39.567 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer personalization state 0 (0 seconds)

  2014 03-18 T 16: 06:39.673 - 04:00 INFO (C 088-0890) < main Thread > [java] bridge exe started ok.

  2014 03-18 T 15: 38:45.288 - 04:00 INFO (016 C-0128) < main Thread > [wsnm_desktop] Session created in WAIT state: id = 1, winStation = Console

  2014 03-18 T 15: 38:45.350 - 04:00 INFO (0488-0978) < 2424 > [MessageFrameWork] 'wssm - VMware View framework Session Manager' program began, version = 5.2.0 build-987719, pid = 0 x 488, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 15: 38:45.397 - 04:00 INFO (0488-0550) < logloaded > [MessageFrameWork] Plugin 'wssm_desktop - VMware View framework Office Manager Instance' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.397 - 04:00 (0488-07 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_winauth - taken in charge of VMware View infrastructure Windows Authentication", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.475 - 04:00 (0488-05 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_thinappmgmt - taken in charge of VMware View infrastructure Application Management", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488-0978) < main Thread > [wssm] Session Manager has begun for the session 1

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 to 28) < logloaded > [MessageFrameWork] 'wssm_uimanager - VMware View Host UI Framework' Plugin support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 B 40) < logloaded > [MessageFrameWork] Plugin 'wssm_ui - VMware View UI framework' loaded, version = 5.2.0 build-987719, buildtype = output

  I was on the phone with VMware for 5 hours Tuesday last with this same problem.  I ended up solving the problem without their help.  You must initialize your model, let the time updated, shut it down, take a new snapshot and recompose your pool.

  Re: View 5.3 - desktop blocked at startup

• OLIVIER to crash when creating analysis views (originally created array view works fine)

  
  I was wondering if anyone else has experienced. It seems pretty weird because the initial view is created.

  This is what happens:

  1. I have create a new analysis. Data source is not serious. I tried the sample App Lite & 2 different Essbase cubes.
  2. Drop some columns on the criteria
  3. Click on the results. It displays a table view. I can record and visualize it etc.
  4. If I try to create a 2nd view of any type, including another table the frontal crashes, showing "Processing, please wait"
  5. Connecting to the server, we will see that there is a windows dialog box indicating "nqssserver.exe has stopped working. Windows can check online for a solution... »

  Eventually it times out. I think that nqsserver.exe restart itself. The view is not created.

  OLIVIER 11.1.1.7

  Any ideas?

  -Daniel

  Just thought I would update this to say that oracle has finally given us a single patch for this problem. Not sure when it will be officially fixed

• View VMFusion is weird

  What I get is in the attachment. I want to know is how I can get my view to normal again. It is a frustrating disruptive

  Hello

  Very weird indeed. So, if I understand you well, then what happens with all applications you are running?

  So even if you open for example MS Paint or Windows Verkenner, you will end up having the same small screen size?

  What screen resolution do you use? Have you tried to change that?

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki

• How to fill a dynamic array according to the choice of the Viewer

  Hello

  I came across a dead end on my page "events".

  There is a dynamic array, get the information from a database. Initially, it will display upcoming events.

  At this point, my question is this:

  * Can fill the dynamic table based on a condition where the current date and the date of the event (as in the comic book) will be compared and if the date of the event is aware of the date, it will appear in the table. Otherwise, it will not.

  If I can do it, can someone please help me with the code?

  In addition, on the right side of the page there are 3 options for the Viewer:

  1. display upcoming events

  2 discovered past events

  3 search for events by month and year

  What I want to do, is that when the viewer clicks on 'past events', the table will be reset and populated by these events, whose date is exceeded.

  When the viewer clicks on "upcoming events", the table is reset again and filled with the relevant events.

  When the viewer selects a month and a year, the database to find reviews of research.

  Can we write this in php? Since I read smwhere that php does not work with onclick functions... I got confused. Cuz in my table data should vary depending on what the Viewer is clicking (coming events/events/research past events). I do not want to create pages for each type of event.

  If anyone has a better suggestion to complete this task, please share!

  Thank you!

  > Can I complete the dynamic table based on a condition if the current date and the event date (as in the comic book)

  > will be compared and if the event date is later than the current date, it will appear in the table. Otherwise, it will not.

  Of course. Just compare the date field in your database with the current time as returned by the function of date of your DBMS. Assuming you are using MySQL, you would compare your column with the currdate() function and the appropriate use of upper / lower to operators in the WHERE clause. If you don't know what a WHERE clause is then I invite you to learn SQL as soon as possible. You can't build data sites without a basic knowledge of SQL.

  > Since I read smwhere that php does not work with onclick functions...

  This means that php is a server side, where interactions with the user always occur on the client's site. But that doesn't mean that you can't call action from the side event on the client side server. Certainly, you can and would be.

  You should consider adding links to the page of dynamic array passing a querystring to the php script that determine which filter to add in the future WHERE clause to the current date, less, etc..

  Also, in the future, please post those questions on the application development forum.

• labview probe button is missing in Schema view?

  no idea why the labview probe & I miss a Vi diagram display?

  You have disabled in action of VI. Probably disabled the debugging.

  

• Prob of materialized view

  Hi all
  
  
  I have problem with Mview when you perform dml operations.
  
  I'm trying to insert or update on the materialized view, then I am getting below error.
  
  ORA-01732: operation non-legal data manipulation on this point of view
  
  Please can you me cant we do on the materialized view dml operations?
  
  My version of DB is 10g.
  

  DESC SUNITHA;
  
  Name     Null?     Type
  NAME          VARCHAR2(10)
  ID     NOT NULL     NUMBER(2)

  create  MATERIALIZED  view maview as select * from sunitha;

  I'm trying to insert into maview
  

  insert into maview values('c',4);
  
  ORA-01732: data manipulation operation not legal on this view

  Please notify.
  
  
  Thank you
  Miriam.

  Here is an excerpt of the document.

  Updatable Materialized Views
  
  You can make a materialized view updatable during creation by including the FOR UPDATE
  clause or enabling the equivalent option in the Replication Management tool. For changes
  made to an updatable materialized view to be pushed back to the master during refresh,
  the updatable materialized view must belong to a materialized view group.
  
  Updatable materialized views enable you to decrease the load on master sites because users
  can make changes to the data at the materialized view site. The following is an example of
  an updatable materialized view:
  
  CREATE MATERIALIZED VIEW hr.departments FOR UPDATE AS
    SELECT * FROM [email protected];
  
  The following statement creates a materialized view group:
  
  BEGIN
     DBMS_REPCAT.CREATE_MVIEW_REPGROUP (
        gname => 'hr_repg',
        master => 'orc1.world',
        propagation_mode => 'ASYNCHRONOUS');
  END;
  /
  
  The following statement adds the hr.departments materialized view to the materialized
  view group, making the materialized view updatable:
  
  BEGIN
     DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
        gname => 'hr_repg',
        sname => 'hr',
        oname => 'departments',
        type => 'SNAPSHOT',
        min_communication => TRUE);
  END;
  
  /
  
  You can also use the Replication Management tool to create a materialized view group
  and add a materialized view to it.
  

• View the history form is really weird

  When I start typing in a box, my history of form appears, but not readable way: http://s21.postimg.org/yfp9s99cz/Screenshot_14.png?noCache=1372954964

  I tried to restart Firefox with disabled modules and the problem disappeared, so I tried to disable them one by one, but that didn't work.

  The problems appeared after the update for Firefox 22.0, and it "works" in each box...

  Hello, it's probably a problem with hardware acceleration. try to update your graphics driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.

• View and change the elements of the array

  Hello

  I'm using LabVIEW to read a set of parameters of an instrument and display them in a table indicator. This first part is pretty easy and works very well. I want to be able to do (so far unsuccessfully) is to change certain values directly on the table indicator and then ironing the new values on the table indicator to the LabVIEW. I would be really grateful if someone could help me understand if this is possible and how?

  Thank you very much

  Gianni

  Make the table a control and writing program with a local variable. Be aware of race conditions. For example, in this case, you have two writers: the instrument and the user, and one who writes last, wins.

• weird: Vista's view of the content of the flash player that was previously connected

  Today, after I clicked on 'file X' in my external hard drive, rather than see content "feature X", I see the content of my flash drive (the last time it was connected)... that is NOT currently connected to my computer. The files from my flash drive show for a few seconds before I have to drive hard 'file X' in my outside, that was the record that I wanted to go to such as mentioned at the beginning of this post.

  No idea why this happened? I'm using Vista 32-bit Enterprise edition.

  Hello

  Run the Microsoft Fixit.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/

  Run Microsoft Safety Scanner as well.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  All the best...