Failed to configure a host control in Foglight 5.6.4

Similar Questions

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• Deployment models for the new cluster - "A" failed to Connect to Host

  Hi all

  I reorganized my ESX 3.5 2 130756 machines in a new cluster (they were already members of another cluster & lt; - this can be an important factor here).  When I try to deploy new virtual machines from templates to the new cluster, almost immediately, the task fails with the error "failed to Connect to Host."  Here's what I did on troubleshooting:

  -I confirm that nothing has changed on the console host IP and DNS service on the ESX host configuration

  -restart services on the ESX host management - tried again, failed.

  -removed and added hosts in cluster - tried again once, didn't

  -disabled DRS on cluster - tried again, failed.

  -confirmed I can deploy templates to other clusters

  -confirmed I can deploy a new virtual machine custom again cluster manually

  -restart the ESX and vCenter server hosts

  -removed ESX cluster hosts and destroys Cluster and file

  -recreated cluster and added guests, same error

  I think I've tried all the basics, but please let me know if you think something else to try.  In the VirtualCenter newspapers, there are the following entries whenever the task fails:

  Unexpected exception received during the NfcCopy

  (SERVER_Template) (vim.fault.HostConnectFault) unexpected exception during clone. Abandonment.

  from the log restore

  Cancel GenericTask... Home: host-2112, task: task-19380

  Cancel CopyVmFiles... Home: host-6900, filesCopied: sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERV01PILOT01/SERV01PILOT01.nvram, sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERV01PILOT01/vmware-1.log, sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERV01PILOT01/vmware.log, sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERVER/SERVER.vmdk,.

  Cancel CreateInvtVm... vmPath: /vpx/vm/#6905 /, inDb: true, onHost: false, onDisk: false

  Cancel ReserveName... Home: host-6900, name: sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERVER/SERVER.vmx

  GetPropertyProvider failed for vm-6905

  GetPropertyProvider failed for vm-6905

  Cancel CreateInvtVm... vmPath: /vpx/vm/#6905 /, inDb: false, onHost: false, onDisk: false

  Cancellation of transaction made available VM

  VDB::IsRecoverableErrorCode Unable to retrieve from HY000:0

  Clone failed: vim.fault.HostConnectFault

  FINISHING special-28370-vm-6545 - vim. VirtualMachine.clone--239A954E-3A34-435C-8F45-5DCE0F4089C2

  -ERROR task-28370-vm-6545 - vim. VirtualMachine.clone: vim.fault.HostConnectFault:

  {(vim.fault.HostConnectFault)

  dynamicType = & lt; unset & gt;

  MSG = «»

  }

  -BEGIN tache-interne-3294--hote-325--vpxdinvthostsynchostlro.synchronize

  Thanks in advance for any help!

  It seems that the model does not really know where he lives.  I am trying to convert a virtual machine model and try to run a migration on it to a host.

  Otherwise, you may need to remove the inventory model and look for the data store that it is and resave.

  -KjB

• 187 updates fail to configure

  SOMEONE ANYONE HELP ME PLEASE UNDERSTAND WHAT I HAVE TO DO TO GET NEW RIGHT. My computer came with 7 home pro, got the "upgrade" to 10, and if Microsoft said that my computer could run 10 he couldn't. I spent 12 + hours trying to get Microsoft to link me to an ISO of 7, which has installed successfully (to my surprise), but now I have 187 updates that fail to configure... It is down right stupid. I tried 6 times and just cut them, because it takes all day to download install and fail to set up, and then go back... Then, disgusted and disappointed by Microsoft for their lies and betrayal about 10 by being able to run on my computer... I had a great computer to work, now I have a $1 300 POS. In addition, this can be important information, I now have a partition on my HDD called H, which was not there before 10, I opened it i and he claims, there is nothing here, yet its properties show 59.8 MB free of 99.9 MB... I have no idea what it is.

  If you have win7 now did you visit the support site for PC manufacturers to install the necessary drivers?

  Manually, run windows update, select 5 important updates and install.

  In the update of the victory, settings uncheck recommended updates, if selected.

  Forget the partitions until the update of victory is resolved

• Licesing control for Foglight for Vmware

  Hello

  We recently went from 100 to 250 CPUs processors and we expect to soon get to 1000. That will put us wayyy on our license.

  How to select the ESX host, I want Foglight to monitor so that I'm not going over our license? (hoping that next year some time we can square upwards)

  There is no way to restrict the license to a number of Sockets ESX host.

• I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots

  OS - win7 family Basic 64-bit

  anti virus-macfee
   
  Original title: I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots. MacAfee antivirus, 1 GB Radeon graphic

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Windows Server 2012 domain controller who fails to configure updates, coming back from changes.

  Hello

  I have a domain controller Windows Server 2012 which fails to configure updates. Each reboot it will say its configuration is updated, then in case of failure and Reverie. I can't find out what it is.

  I checked WindowsUpdate.log the only mistake I see there:

  2015 03-22 1000 1160 installation 09:36:29:735 caveat: SelfUpdate is in an error state

  Historical update check indicates a recent update that does not KB2770816:

  

  Download this update and install use autonomous to update manually the results of Setup in a message saying that the update is already installed (although windows search for the update in the updates installed appears without any results)

  I tried to launch the Windows update troubleshooting tool, that said he fixed a point, but after a reboot, I get always this error and now a new, every 20 seconds, I if I get this annoying modal popup saying that windows cannot check the updates even if it seems it can:

  

  Someone at - he counsel on how to locate the reason for the failure of the configuration of updates, perhaps, a log file will be useful information.

  Thank you.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• 13 Windows updates fail to configure when installed manually, one at a time

  I just bought this gateway DX4375 a couple of weeks with pre-installed Windows 8 and had 86 important to install updates. Whenever I tried to run the update, they could not set up and took hours to undo changes.

  I've refreshed the operating system reset a couple of times and even including erase the disc without success after trying to fix the problem with all of the recommendations of Microsoft.

  Finally I tried to install them all manually one at a time. 13 (attached) of them would not move because he could not set up and kept breaking the updater. Some of them even caused the update history to be wiped and all downloaded updates deleted.

  I ran to the resolution of the problems of updating to correct errors, but they would still not set up. Even with the updates that are successful the updater is often broken and requires repair. Components Updater tool finds errors, but is unable to correct all automatic reset of Microsoft running. (attached)

  DISM.exe/online/Cleanup-image /Scanhealth ran, /Restorehealth Cleanup-image DISM.exe/online and SFC scan does not. I can't update Windows 8.1 because there was no product key supplied with the gateway DX series desk top and updates failed is KB2871389 (the update needed to store) that fails to configure.

  

  Thanks Vijay, but if you take the time to read my post that you will see that I tried many scans including SFC on more than one occasion. When I finally got the 8.1 update win with the help of Microsoft problems disappeared.

• Control budget F150 The GL has failed for the mode of control of funds

  Dear all

  What is the solution for these funds is not the code.

  Thank you

  F150 is synonymous with

  Budgetary control GL failed for the mode of control of funds

  You should check if you have enough funds in the GL.

  Thank you

  Gene

• How can I configure adobe hosting?

  How can I configure adobe hosting? I would spend my Muse site to an Adobe server.

  See download an Adobe Muse to a third-party hosting service site for the download of a Muse site to a third party hosting service.

• Configure the host of Serengeti

  Hey guys -.

  I get the following error message when you try to run the workflow "configure the host of Serengeti."

  I have BDE appliance 2.0 and 2.0 version of the plugin installed orchestrator

  [2015-03-02 16:24:19.006] [I] vShield Manager - Targe
  [2015-03-02 16:24:19.171] [I] https://10.69.255.184:8443/serengeti
  [2015-03-02 16:24:34.133] [I] REST host: DynamicWrapper (Instance) : [RESTHost]-[class com.vmware.o11n.plugin.rest.RESTHost] -- VALUE : com.vmware.o11n.plugin.rest.RESTHost@e8f027e0
  [2015-03-02 16:24:34.133] [I] REST host authentication: DynamicWrapper (Instance) : [RESTAuthentication]-[class com.vmware.o11n.plugin.rest.Authentication] -- VALUE : NONE
  [2015-03-02 16:24:34.184] [I] REST host added: DynamicWrapper (Instance) : [RESTHost]-[class com.vmware.o11n.plugin.rest.RESTHost] -- VALUE : com.vmware.o11n.plugin.rest.RESTHost@1f9746b
  [2015-03-02 16:24:34.318] [I] op: DynamicWrapper (Instance) : [RESTOperation]-[class com.vmware.o11n.plugin.rest.RESTOperation] -- VALUE : Login 452e4501-4ba7-4b47-81b1-c46716ca0210 /j_spring_security_check?j_username=YWRtaW5pc3RyYXRvckB2c3BoZXJlLmxvY2Fs&j_password=xxxxxxx POST 0 application/json
  [2015-03-02 16:24:34.318] [I] host: DynamicWrapper (Instance) : [RESTHost]-[class com.vmware.o11n.plugin.rest.RESTHost] -- VALUE : com.vmware.o11n.plugin.rest.RESTHost@f64b2fcb
  [2015-03-02 16:24:34.541] [I] vShield Manager - Targe
  [2015-03-02 16:24:34.546] [I] Serengeti
  [2015-03-02 16:24:34.662] [I] Login
  [2015-03-02 16:24:34.755] [I] Request: DynamicWrapper (Instance) : [RESTRequest]-[class com.vmware.o11n.plugin.rest.Request] -- VALUE : com.vmware.o11n.plugin.rest.Request@60986bab
  [2015-03-02 16:24:34.755] [I] Request URL: https://10.69.255.184:8443/serengeti/j_spring_security_check?j_username=YWRtaW5pc3RyYXRvckB2c3BoZXJlLmxvY2Fs&j_password=xxxxxx
  [2015-03-02 16:24:34.797] [I] Cannot execute request: hostname in certificate didn't match:  !=  (Workflow:Execute Login Operation / Execute Operation (item2)#14)
  [2015-03-02 16:24:34.898] [I] REST host removed: DynamicWrapper (Instance) : [RESTHost]-[class com.vmware.o11n.plugin.rest.RESTHost] -- VALUE : com.vmware.o11n.plugin.rest.RESTHost@79e5b22
  

  I would appreciate some advice from people who know what they are doing before you start poking around.

  Let me know if you need more information

  See you soon!

  Hi eatVM,

  You solved this problem?

  HTTP and REST of the vRO6.0 plugin added new more stringent audits.

  VMware has just released the version of technical overview of the vRO REST plugin with an option to disable checking of the host.

  So if you want to have BDE plugin works fine with vRA 6.2, you should spend the REST HTTP plugin.

  You can download the plugin here.

  Technical preview of REST plugin version

  Upgrade of the REST-HTTP 1.0.4.2229037 HTTP-REST 1.0.7 - 2563729 of vRO configuration web page.

  
  

  Make sure the value false for the parameter 'hostVerification' during execution workflow "Configuration of the host of Serengeti."

  
  

  Indulge yourself, hope everything goes well with you!

  
  

  Kind regards

  Sylvana

• Shared services registration failing when configuring EPMA 11.1.1.3

  Hi all, I am currently woking on essbase and any knowledge of planning so tried to update my knowledge. I installed epma 11.1.1.3 on workstation to VMware windows 2003 that I have windows 7 laptop. oracle 10g installation created a user/database (epma) patterns (sm, ms) is trying to set up the foundation, essbase, planning and reporting and analysis services. the configuration database and register with shared services has failed. I'm doing something wrong. I followed some configuration documents that are documented with screenshots are still unsure as to what I do. Please advice on how to avoid these failures.
  
  Here are the results of the validation of the configuration.
  
  Thanks in advance.
  Srinivas
  
  Oracle EPM system
  Diagnostic reports
  Generated 03/03/12 23:05
  Running on validation srinivas
  Validation tool Info: 11.1.1.3.0 drop 9-0 build 3129 2009-07-16 13:24
  Name of the operating system: Windows 2003
  Operating system version: 5.2
  
  
  Status Service Test Description duration of test
  Foundation of Hyperion
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  relationalStorageConfiguration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  OPN FAILED: OpenLDAP Check if global roles number of not less than 16
  Error: $item.exception.localizedMessage
  Recommended action: 0 s
  OPN FAILED: connection OpenLDAP OpenLDAP
  Error: srinivas:28089
  Recommended action: open Start LDAP 1s
  The ERP Integrator
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Essbase / customer
  WR PAST: Windows registry check if EQD excel addin registered for Essbase Client 0 s
  Essbase / Essbase
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  EAS FAILED: Essbase Server start the Essbase server check using the Maxl command
  Error: Result: unable to connect to Essbase server by using the command MAXL. Please check the essbase server is running.
  Recommended action: check Essbase server is started. 2 1
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 7 s
  Essbase / Essbase Administration Services
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / service provider
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / Smart Search
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  Essbase / Studio
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Managing the quality of financial data
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Foundation / calculation Manager
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / Performance Management architect
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / workspace
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  FROM HTTP: Http is [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] s 0 empty file
  [FROM HTTP: string check Http [LoadModule jk_module modules/mod_jk] file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
  PAST REG: Register all links are present in the registry. 2 1
  Performance dashboard
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Planning
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  applicationServerDeployment: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Profitability and cost management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Strategic Finance
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Financial management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Reporting and analysis
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 1 1
  
  Test start time: 23:05:18
  End of test time: 23:05:40
  Test duration: 21s

  Hi Srinivas,

  I suggest you to do separately from the configuration of the different components. First you configure shared services and continue with the other components.
  And also using the same relational database for all components is not recommended.
  Doing so will make you empty the things about it you give and would be easy to fix too.
  And I'm sckeptic on your database connection.

  Few things to check before you start the configuration.
  1. check are you can connect to the database on firewall problems.
  2 and also check the timeout values defined for the database.

  Kind regards
  Pradeep

• VMWare Workstation 6.5 - configure a host as a bridge?

  Hello everyone.

  I wanted to play with some network settings on a FreeBSD system. Basically, what I was curious about is, is it possible to configure a host VM (FreeBSD or OpenBSD in this case) as a bridge to other virtual machines?

  I know it's possible with products such as VMWare Server and ESX (the use of virtual switches), but was not sure if this feature is possible with the workstation.

  I neeed to do tests and the only option I have at my disposal is the workstation.

  Appreciate the help.

  Yes, what you're trying to achieve is possible

  Just add to your VM 2 cards, 1 deck, 1 with host only

  your "internal VMs', and then connect to the host only

  then use FreeBSD for "transfer" your internal VMs outdoors using your connection in bridge

  hope that it points you in the right direction

  concerning

  Jose Ruelas

• Error 25011. Unable to configure the host Agent Service, and then if I try to start, shortcut missing serverui.url

  Hello

  I tried to get VMWare Server 2 to settle, (Windows Vista Business, SP1, Internet Information Services running, SQL Server 2005, 2008...

  and everything I try, I get error 25011. Cannot configure the host Agent Service.

  (The old Console server ran very well, only a few months ago, I can not connect with it to remote machines)

  Any suggestions would be welcome!

  Thank you

  Janos

  Hello

  Try:

  1 uninstall WMServer (you can clean the reg file)

  2. stop the IIS services

  3. install VMServer

  4. start IIS if you need it.

  J.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Configuration of host and remote business partners

  Hello
  
  As new B2B, I have a very basic question.
  I have two machines, one which I use as a host of trading partner the other remote business partner. The steps in configuring the host partner would be the same as those required for the configuration of the remote trading partner?
  Currently the commercial host end partner, in addition to create identifiers for the host partner commercial, I am also
  1. create the remote partner
  2. create the credentials for the trading partner in the distance
  3 assign documents to the remote trading partner and
  4. creation of the delivery to the business partner channel.
  
  I guess I should do a similar configuration to the remote end of trading partner, before creating agreements for business partners.
  Is there something else that needs to be handled?
  
  It would be awesome if someone can share step-by-step instructions that would be required to set up the host and remote business partner. I use Oracle 11g B2B and have not worked with previous versions of B2B.
  Any help in this direction will be greatly appreciated.
  
  Thank you
  Priya.

  Hi Priya,
  Steps are correct and you must configure both machines.

  You can reference B2B samples available in samples of SOA in link below:
  http://www.Oracle.com/technology/sample_code/products/SOA/index.html

  In this step by step instruction, guide is available.

  You can check out below recipe books:
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU001_EDI.PDF
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU002_HL7.PDF
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU003_ebxml.PDF

  Please let us know your protocol and usecase to know more details.

  Rgds,
  Nitesh jegou