Shared services registration failing when configuring EPMA 11.1.1.3

Similar Questions

• Profiles of DRM fails when creating EPMA Interface

  Hello

  DRM getting authentication failed when creating profiles of EPMA.

  I tried several times but his failure to get. do I need to do something in DRM. Please some guide.

  Hello

  Please follow him below the steps and, hopefully, this should solve your problem

  1. connect to the DRM application server.

  2. launch the DRM configuration console

  3. click on the Application to change

  4. on the register EPM tab, click the button cancel the registration.

  5. in the identification information section change of user name and password for the correct credentials (as a general rule, the user is epm_admin)

  6. click on the button Save

  7. Enter the credentials of the user CSS (as a general rule, the user is epm_admin)

  8. click on Save Configuration

  9 restart DRM Services

  10. try to create an import profile in EPMA

  Thank you

  ~ KKT ~.

• Photoshop elements 12 Shared Services - Installation failed

  Have tried two times to get install (second time turn off my virus checker) a failure to install the shared services, then it restores and uninstalls programs.

  Downloaded Support Advisor - has not found any question.

  Open the file "PSE12 STI Installer 12.0 10-26 - 2013.log.gz"-gibberish to me but no obvious error Code.  Last lines few involve a successful installation (copied below)

  ========================================================================================== ====

  Restarting your computer is recommended:

  In order to complete the installation, restart the computer

  > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

  Call post-Forum custom Hook

  Start the DB local media cleaning.

  Removal of media premises db.

  Cleaned media local db.

  : TIMER END: [Total Timer] took 10539,3 milliseconds (10,5393 seconds) DTR = 38730,1 Kbps (37,8224 Mbps)

  Uninstalling AAM

  AAM uninstall Status: 0 and 0

  Exit code: 0 - no error.

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  END - Installer Session

  *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  ========================================================================================== ======

  OS: Windows 7 Home Premium (64-bit)

  Norton 360

  2 months old Lenovo

  Help?????????????????? ................

  Thank you

  Resolved using CHAT with an agent.  Souloumiac was excellent.

  At issue:

  Navigate the DVD, open the PES 12 folder (if you download then it should be in the folder of Photoshop Elements).

  The ElementsSTIInstaller to install it then running

  NAVIGATE to "C/Program file (X 86) /Common leader/Adobe /.

  RENAME the OOBE folder as oldOOBE.

  FORCE DVD

  It is now installed.

• grant the role of service to service user service tenant: failed when you try to deploy VIO

  Hello

  I have problems when you try to deploy VIO with integration of ads.  I am able to successfully deploy Violence without AD as an authentication source.  However, when I try to deploy VIO with AD as the source of authentication right about 85%, I get an error in the /var/log/jarvis/ansible.log:

  > > 2016-04-14 17:29:11, 597 p = 354 u = jarvis |  TASK: [config-controller | create endpoint of keystone] *.

  > > 2016-04-14 17:29:12, p = 354 737 u = jarvis |  changed: [172.22.33.31]

  > > 2016-04-14 17:29:12, 738 p = 354 u = jarvis |  TASK: [config-controller | create tenant services] *.

  > > 2016-04-14 17:29:13, 714 p = 354 u = jarvis |  changed: [172.22.33.31]

  > > 2016-04-14 17:29:13, 715 p = 354 u = jarvis |  TASK: [config-controller: grant the role of service to service user tenant service] *.

  > > 2016-04-14 17:29:15, 152 p = 354 u = jarvis |  has failed: [172.22.33.31] = > {'impossible': true}

  > > 2016-04-14 17:29:15, 153 p = 354 u = jarvis |  MSG: exception: name

  > > 2016-04-14 17:29:15, 154 p = 354 u = jarvis |  FATAL: all hosts have already failed - abandonment

  I tried Googling this error and was brought to this thread: problem of Installation of VIO - status: Bootstrap failed controller node but he is actually getting an LDAP error that I'm not.

  This thread suggest you check the log of the key, but there is not keystone on my VIO Device directory:

  > > root@localhost:~# ls/var/log/keystone

  > > ls: cannot access/var/log/keystone: no such file or directory

  So I'm puzzled.

  This ended up being a bad configuration of the options of the AD.

• Commit failed when configuring the driver settings

  Hello

  When I try to set up the validation of "capture workspace webcenter console" driver I get the error like "Failed to Connect to imaging system. "Could not connect po"

  basically he asks UserID-weblogic, Imaging Web service URL - Pwd-xxxxx, political base of security http://localhost:XXXXX/Imaging/ws

  When I copy the URL and paste it into the browser, I get a 403 forbidden as output.

  Ref points:

  I checked the imagery in deployments and is active.

  My capture Webcenter is an area (under windows) and IPM is in another (linux)

  Hello Ryan,

  The error has been resolved, it was a stupid mistake, the machine (windows) capture did not file server IPM (OLE) host mapping. By the time I traced it showed me the message 'Connect'

  Thanks for your time again.

  Kind regards.

• MSAD question shared services configuration?

  Hello
  I recently configured MSAD with shared services.but, the problem is that the hfm users are not in the same group at msad.so I am not getting all the hfm users.so I set up 2 groups of msad more.
  
  now the problem is when configuring, please enter the username and password of any user in this group.here the password will change for each days.and 45 it is not practically possible to have other SSP password for the administrator to change for every 45 days.
  
  is there another solution for this problem.
  
  HYperion 11.1.1.2
  
  concerning
  Bharat.TV

  Hi Nani,

  Yes, you must specify a user id & pwd to connect MSAD, but do not use anonymous option as it is not a good practice to connect MSAD.

  As you say it is change of password in all 45 days so please check with the windows team who maintain & manage MSAD and let them ask to create a service account and do not set the option to password expiration after n days. This is how works the service account.

  Hope this will help you.

  Atul K,.

• Windows Media Player Network Sharing Service or a service it depends on failed to start. (Windows 8)

  A problem occurred recently in which I can't stream my music from WMP with other devices in the home as my Xbox 360 group. It has always worked well and this is the first time, it's happened. When I tried to connect my PC to the Xbox, my PC has appeared on the list, but when it connects a reason any. I then went to my PC to make sure that everything was in order. I open Windows Media Player and watched the streaming options. Everything was going in order, except that the media from my computer was turned on not a reason any. I clicked on ' turn streaming media on "and it led me to the page of the control panel option. It reads simply "media streaming is not enabled" (as well as usual and precautions which not). I clicked on the button below "streaming media turn on. This is where my problem appears. Loads of my computer and nothing happens. I tried a few times and he told me then that the title of the question says. He then invites you to me to go to the service administrator tools. So I did and I went through the list of services until I found than the one titled "Windows Media Player Network Sharing Service. He was not running although it should be automatically. I clicked on it and press start and it says "Windows cannot start the service on Local computer" with error 1068: the dependency service or group could start.

  If anyone has a solution I would be very happy. I tried to be as complete as I could in the description.

  I had this problem as well, with 8.1 widows.  On the Dependencies tab, I had two components, the HTTP Service and Windows Search. I found that Windows Search has been disabled.  I don't know how it's spent, but allowing him to corrects the problem.

• 13 Windows updates fail to configure when installed manually, one at a time

  I just bought this gateway DX4375 a couple of weeks with pre-installed Windows 8 and had 86 important to install updates. Whenever I tried to run the update, they could not set up and took hours to undo changes.

  I've refreshed the operating system reset a couple of times and even including erase the disc without success after trying to fix the problem with all of the recommendations of Microsoft.

  Finally I tried to install them all manually one at a time. 13 (attached) of them would not move because he could not set up and kept breaking the updater. Some of them even caused the update history to be wiped and all downloaded updates deleted.

  I ran to the resolution of the problems of updating to correct errors, but they would still not set up. Even with the updates that are successful the updater is often broken and requires repair. Components Updater tool finds errors, but is unable to correct all automatic reset of Microsoft running. (attached)

  DISM.exe/online/Cleanup-image /Scanhealth ran, /Restorehealth Cleanup-image DISM.exe/online and SFC scan does not. I can't update Windows 8.1 because there was no product key supplied with the gateway DX series desk top and updates failed is KB2871389 (the update needed to store) that fails to configure.

  

  Thanks Vijay, but if you take the time to read my post that you will see that I tried many scans including SFC on more than one occasion. When I finally got the 8.1 update win with the help of Microsoft problems disappeared.

• Essbase server showing in Shared Services, but displays do not when you try to assign roles to groups.

  Hello

  11.1.1.3 version

  SSP Essbase server shows but for all groups roles has beed deleted.

  When I try to re - assign particular group roles, I realized that Essbase server does not show in the left pane.

  This means essbase struck with Shared Services? If so can you please let me know the steps to register again?

  I know to remove the instance Essbase Shared Services and new Externalize user will do, BUT can you please let me know y at - it problems doing?

  In the morning today only we are facing this problem.

  Thank you

  Alain

  Hello

  Problem has been resolved. Worked with Oracle and review Essbase.

  It is corrupt and possibly RDBMS openldap.

  Solution: Manually (via MaxL) has deleted all requests for services shared and deleted essbase server then outsourced to the users to register with Shared Services.

  Thank you

  Alain

• Grid Infra configuration failed when running root.sh on the second node

  Hello world.

  I am new guy on RAC environment. When you try to install Oracle RAC on the local environment, I had this problem:

  -J' have run root.sh successfully on a local first node

  -After that, the first node, there are 3 cards of virtual network created to SCAN listening addresses

  -After the success of action on the first node, I tried to run this script on the second node, but the error occurred:

  CRS-2676: Start of 'ora.DATA.dg' on 'dbnode2' succeeded
  PRCR-1079 : Failed to start resource ora.scan1.vip
  CRS-5017: The resource action "ora.scan1.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.124 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan1.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan2.vip
  CRS-5017: The resource action "ora.scan2.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.122 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan2.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan2.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan3.vip
  CRS-5017: The resource action "ora.scan3.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.123 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan3.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan3.vip' on that would satisfy its placement policy
  
  start scan ... failed
  FirstNode configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 9379.
  /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  

  I tried again with several times (with left-hand) but the problem was still there. Can you explain to me?

  -Why, after running root.sh on the first node, all IP SCANNER interfaces was created on this node? This is the reason why root.sh fails on the second node.

  -How to solve?

  I use the server for address scan local DNS resolves to 3 IPs, and I can run script runcluvfy.sh with success on both nodes.

  I thank in advance

  PS:

  I use two virtual machines in vmware. After running root.sh on the first node, I checked and found this funny information:

  [oracle@dbnode1 sshsetup] $ / sbin/ifconfig

  eth0 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.66 Bcast:192.168.50.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:431 b / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 249814 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2956882 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 24913472 (23.7 MiB) TX bytes: 4369984705 (4.0 GiB)

  eth0: 1 link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.120 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:2 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.122 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:3 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.123 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:4 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.124 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:192.168.29.10 Bcast:192.168.29.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:4325 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 471 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 664 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 82216 (80.2 KiB) TX bytes: 107920 (105.3 KiB)

  eth1:1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:169.254.75.201 Bcast:169.254.255.255 mask: 255.255.0.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Fall of RX packets: 10626 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 10626 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 7942626 (7.5 MiB) TX bytes: 7942626 (7.5 MiB)

  I think it's because of the failure on node 2

  UPDATE:

  That thing is normal, I ignored it and the installation can continue normally. Thank you all for your help.

• How can I delete the previous configuration of Essbase Server Shared Services?

  Hi all

  I am trying to reinstall the Essbase Server (on a new server we have upgraded the Essbase server hardware) and reloads the data, but the current installation believes that I have already set up despite the withdrawal EssbaseCluster-1 of Shared Services Application groups.  Is there something else I need to do to get the new install Essbase server configured as a new instance of Essbase?

  Thank you
  Ryan

  If the server names have been changed, then it probably won't work, but I don't know what you mean that it did not work, you should check the registry of shared services, other possibilities are reset configuration tasks in the registry by using the epmsys_registry utility.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Configuration of hyperion shared services on 11.1.2.1 reg

  Hello
  
  I installed shared services on 2 servers (Server1 and Server2) to balance the load. I have only 1 instance of oracle schema. I configured SSP on the 1 Server successfully.
  
  Now, I need to configure shared services on Server2 with the already configured oracle schema.
  Could any one pl. suggest how do.
  
  
  See you soon
  Praveen

  I assume that you have read all the documentation and understood it before proceeding with the installation/configuration - http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121/ch03s03.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Urgent: Configuration of the various components of Hyperion a shared service

  Hello
  
  Here are my requirements:
  
  We are updating our existing Version 6. X 7 X 11 Version EMP applications. I want to configure all applications installed in different servers in a shared service. All users belong to an Active directory only.
  
  Plan is like this
  
  Server1: Essbase component. I have almost 5 application created in this server.
  
  Server2: New Essbase. Again the application 5 is this server.
  
  Server3: Hyperion Planning,
  
  Server4: Hyperion Financial Reporting
  
  Server5: Hyperion workspace
  
  
  So, all these different Essbase and planning applications are installed in differnet servers. Can I have 1 Shared Service for all these applications. If so, can anyone suggest the approach and configuration details.
  
  Appreciate your help in advance!
  
  Thank you very much... Best regards, UB

  It should be exactly the same process as with a single instance as long as everything has been saved successfully.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Registration of an application with Shared Services

  I just use HfmCopyApplication.exe to migrate an application to a production environment in a newly installed test environment. However, when I opened in the client system 9 HFM in the test environment and try to 'Open the Application', I can see the new app in the list (so I know that the migration is successful), but I get a message saying "+ this application is not registered with Hyperion Shared Services. Please contact your administrator. + »
  
  Anyone can get an idea? I do not know how to save an application that has been migrated to another environment, and I am reluctant to create a new application of the same name, because I don't want to accidentally wipe who moved just above. I looked in the documentation of the HfmCopyApplication, but it says I need to register the application migrated with Shared Services... He didn't tell me how.
  
  Thank you.

  Hello
  Open the workspace - navigate - administer - Application classic Administration - Administration of peacebuilding.
  In the browser view open tasks - Administration of Consolidation - Application registry, select Cluster and select your new application.
  Then go to the SS and the provision of the users.

  Kind regards
  Marcin Kuzdra

• WARNING when saving the changes after adding the user to the shared services

  Hi all

  I added a user in shared and all services, saving the changes I get this warning

  

  Is it safe to ignore this warning, what am I supposed to drop after you save the changes

  If you added the user in Shared Services, then no problem to save it.

  Thank you

  Mady